In case channel width is defined to be CH_WIDTH_MAX; channel width
set to CH_WIDTH_80P80MHZ. This can be incorrect if the secondary
frequency segment is not defined. So conditionally set maximum
channel width to CH_WITH_160MHZ.
CRs-Fixed: 1082221
Change-Id: Iff28c56de56e5481814b4710eb51920a88f0f5f7
In function __lim_process_sme_register_mgmt_frame_req, check for
return of qdf_list_remove_node before freeing node.
Change-Id: Ie52f298427e5b006b95f5248ce588d97e2c6aa72
CRs-Fixed: 1081795
Currently channel zero is configured by sigma dut when reassoc
to same AP is issued. This results in failure as this is invalid
channel. Fix this by passing channel of connected AP.
Change-Id: I1fbdc10256b59d7ca49256461244566e04a52df5
CRs-Fixed: 1081234
In function csr_roam_offload_scan do not populate ASSOC IE(which are only
required in connected_state) in a non-connected state. Otherwise it will
access connected BSS descriptor which is not avaiable in non-connected state.
Change-Id: I9cb0b6f6a49b25c2bd74c5e2140e8fe8919f3f44
CRs-Fixed: 1081198
Host driver reports TX ACK status as success when FW sends
failure status. Due to this supplicant is not retrying the
P2P confirmation frame resulting in Go Negotiation failure.
P2P negotiation state machine can be messed up for other
negotiation action frames as well.
Change-Id: I9a22bd542aea32c7cbac11107fe8b6c9785a2ac1
CRs-Fixed: 1079970
The CLD driver does not compile when FEATURE_WLAN_CH_AVOID is not
defined. Fix related issues.
Change-Id: I3c3f14c16bd6a004670b6105231e591a13039fdc
CRs-Fixed: 1078863
The minimum bandwidth supported is 5 MHZ. Kernel API
wiphy_apply_custom_regulatory can enable channels 12/13
with BW 5/10 even for reg rule 2402-2472. Circumvent the issue
by doing a check in the driver.
Change-Id: I9ad600eda2e507312a3016aa6d1fe6fdc41724f2
CRs-Fixed: 1079851
During driver un-initialization, cds scheduler is closed after
un-initializing lower layer modules. This may lead to crash as
there is possibility of MC thread to process commands after
lower layer objects are uninitialized/freed.
Un-initialize lower layer modules after closing cds schedulers.
Change-Id: Ia43ca4f95c5b40aeb14976b523008e650ba26e10
CRs-Fixed: 1079196
Propagation from qcacld-2.0 to qcacld-3.0.
Error level logs should be used only for error conditions.
Add changes to move unwanted logs to info level.
Change-Id: Ib5b3e1235ad36cf0594291f33e84758261e4d422
CRs-Fixed: 1049765
propagation from qcacld-2.0 to qcacld-3.0
Currently CFG_INFRA_STA_KEEP_ALIVE_PERIOD_DEFAULT is 0 in code
and in ini file it is 30. If this parameter is undefined in ini
file, then this KEEP alive feature gets disabled.
Change CFG_INFRA_STA_KEEP_ALIVE_PERIOD_DEFAULT value to 30
in code.
CRs-fixed: 1049206
Change-Id: Iff0933842b13482e9949473a4c8a48bf83230cc1
qcacld-2.0 to qcacld-3.0 propagation.
scnprintf returns the number of characters which are actually
written in the buffer. Currently there is no check, while filling
buffer. Hence, a situation might arise where the len is greater
than the sizeof of buffer. Later, this buffer is copied to user space
through api copy_to_user and since the len is greater than buffer
size, buffer over-flow would occur.
As a part of fix, make sure that buffer over write doesn't occur.
Change-Id: I652979cb26fd7fff36ee54f9ec60132453ac7913
CRs-Fixed: 908252
Implement iwpriv pktlog command to change the pktlog buffer size.
This command is effective only if pktlog disable is issued previously.
This command needs two argument. First argument should be "3" which
denotes to set the pktlog buff size. Second argument should be the
pktlog size which user wants to change.
For eg, "iwpriv wlan0 pktlog 3 2" will change the buffer size to 2 MB.
Change-Id: Ifa27916667198c3fdc1c51d0e38564869405e041
CRs-Fixed: 1072584
Since IPA offload enable status checking before interface setup,
IPA offload enable/disable will not be performed properly.
Fix to check IPA offload enable status after interface setup or
before interface cleanup.
Change-Id: Ifd950d7d629750afd526db56de2f4b656f1f87de
CRs-Fixed: 1079440
As per the PMF offload feature, all STA related SA queries should
be handled in firmware and all SAP related SA queries should be
handled in host.
Current driver is assuming that both are handled in firmware which
is not true. Fix the design by checking if session is STA or SAP and
take the decision based on that.
Change-Id: I1a89e509068ecb85a6c5655dd43e01a39d660b2e
CRs-Fixed: 1081177
propagation from qcacld-2.0 to qcacld-3.0.
In STA+AP or AP+AP mode, if the sap's interface is
created rather than using wlan0, there is no setting
for tcp chksum offload.
Change-Id: I346ea186ad26c5f5a0fd4c3dee4a39b102570de7
CRs-Fixed: 1063245
qcacld-2.0 to qcacld-3.0 propagation
Memory allocated to Ibss peers for IEs info is not getting freed
in some cases.
Add changes to fix memory leak.
CRs-Fixed: 1075406
Change-Id: Ie22b70cb5050c2646e3c2c12fcbdf66255c1284b
qcacld-2.0 to qcacld-3.0 propagation
During late suspend jiffies will not be incremented. Because of this
scan results are not age out as the delta of current time and the BSS
received time is not correct.
To address this, use the system time instead of jiffies for the
BSS received time and also make sure to use system time in all
other functions.
CRs-Fixed: 1018460
Change-Id: Ia14b84f1039dc4ffec6ad63550fed21e932f8012
Presently there is a small window where there is a possible race condition
when con mode change happens at the same time as a ssr.
Protect the same by validating the context. Also move the hdd_init
to module_init so that ssr/qdf infrastructure are always present
when the driver is loaded.
Change-Id: Id14ebef7b5bbafaa799752620973ce03ab0bdd8c
CRs-Fixed: 1078405
When firmware event times out, panic only if recovery is disabled else
return failure so that driver load can fail gracefully.
Change-Id: I90d110af370842fcd2bc8cc11008d1524c99332e
CRs-Fixed: 1077315
csr_prune_channel_list_for_mode() is implemented in csr_api_roam.c
but is referenced from both csr_api_roam.c and csr_api_scan.c
Set prototype of csr_prune_channel_list_for_mode in csr_inside_api.h
which is included by both files.
Change-Id: I106d8e25265bcbd16a67ebb23aff030826a02aed
CRs-Fixed: 1076076
In sme_ps_enter_wowl_req_params() and sme_ps_exit_wowl_req_params(),
if call to sme_post_ps_msg_to_wma() fails, both caller and callee
frees the message buffer causing double free of memory.
Do not free the memory again in caller function if
sme_post_ps_msg_to_wma returns error.
Change-Id: I92bab9477a07016c44f099e4286178c9d5487a4c
CRs-Fixed: 1076087
