Commit Graph

4170 Commits

Author SHA1 Message Date
FUJITA Tomonori
8b40228f3f [SCSI] scsi_debug: use list_for_each_entry_safe
This replaces list_for_each_safe and list_entry with
list_for_each_entry_safe.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Douglas Gilbert <dougg@torque.net>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:18:59 -05:00
FUJITA Tomonori
a75869d1ff [SCSI] scsi_debug: remove unnecessary condition test in devInfoReg
open_devip is always non NULL.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Douglas Gilbert <dougg@torque.net>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:18:58 -05:00
FUJITA Tomonori
5cb2fc0610 [SCSI] scsi_debug: create new scsi_debug devices at a single place
Two functions, sdebug_add_adapter and devInfoReg, creates new
scsi_debug devices. To simplify the code, this patch adds a new helper
function to create new scsi_debug devices (sdebug_device_create) and
converts both functions to use it.

I plan to add more to scsi_debug devices (e.g. using a thread for a
scsi_debug device for scalability testings). This patch enable me to
add such to just the new helper function instead of touching two
functions, sdebug_add_adapter and devInfoReg.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Douglas Gilbert <dougg@torque.net>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:18:58 -05:00
FUJITA Tomonori
f3df41cff4 [SCSI] scsi_debug: remove temporary hack around sscanf for negative values
sscanf can handle negative values.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Douglas Gilbert <dougg@torque.net>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:18:58 -05:00
James Bottomley
1c353f7d61 [SCSI] export command allocation and freeing functions independently of the host
This is needed by things like USB storage that want to set up static
commands for later use at start of day.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:18:57 -05:00
James Bottomley
e507e30b80 [SCSI] consolidate command allocation in a single place
Since the way we allocate commands with a separate sense buffer is
getting complicated, we should isolate setup and teardown to a single
routine so that if it gets even more complex, there's only one place
in the code that needs to be altered.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:17:30 -05:00
FUJITA Tomonori
035f5e0651 [SCSI] 3w-9xxx: use sg buffer copy helper functions
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Adam Radford <linuxraid@amcc.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:15:46 -05:00
FUJITA Tomonori
e943752ecf [SCSI] 3w-xxxx: use sg buffer copy helper functions
This rewrites tw_transfer_internal with scsi_sg_copy_from/to_buffer.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Adam Radford <linuxraid@amcc.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:15:46 -05:00
FUJITA Tomonori
31fe47d437 [SCSI] stex: use sg buffer copy helper functions
This replaces stex_internal_copy with scsi_sg_copy_to/from_buffer.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:15:46 -05:00
FUJITA Tomonori
d4345028d4 [SCSI] aacraid: use sg buffer copy helper functions
This replaces aac_internal_transfer with scsi_sg_copy_to/from_buffer.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Mark Salyzyn <Mark_Salyzyn@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:15:46 -05:00
FUJITA Tomonori
6690bae7e0 [SCSI] ips: use sg buffer copy helper funcitons
This rewrites ips_scmd_buf_write/read with scsi_sg_copy_from/to_buffer
respectively.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Salyzyn, Mark <Mark_Salyzyn@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:15:46 -05:00
FUJITA Tomonori
944cf8b4cb [SCSI] ps3rom: use sg buffer copy helper funcitons
Note that if scsi_bufflen(cmd) is not zero, the command always has an
sg list. So this patch doesn't do the error checking in
fill_from_dev_buffer and fetch_to_dev_buffer did.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Looks-OK-to: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:15:45 -05:00
FUJITA Tomonori
21a6182924 [SCSI] scsi_debug: use sg buffer copy helper functions
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Douglas Gilbert <dougg@torque.net>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:15:45 -05:00
Matthew Wilcox
78b4b05db5 [SCSI] BusLogic: make FlashPoint support x86-32 only
We've verified that there are 64 bit and endianness problems in the
flashpoint driver.  Reverse the logic of CONFIG_OMIT_FLASHPOINT (make
it CONFIG_SCSI_FLASHPOINT) and make it depend on X86_32 so it can't
appear for any other architectures.  Long term, if someone chooses,
they could make FlashPoint 64 bit compliant (it looks like its a
question of fixing up the sizes in some of the packed descriptors)

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:15:44 -05:00
FUJITA Tomonori
2505873afe [SCSI] aic79xx: fix IOMMU mapping failure handling
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:15:44 -05:00
FUJITA Tomonori
647b242562 [SCSI] aic7xxx: fix IOMMU mapping failure handling
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:15:44 -05:00
Mike Christie
ce5450392f [SCSI] qla4xxx: Add target reset functionality
This patch adds target reset functionalty.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Acked-by: David Somayajulu <david.somayajulu@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:15:43 -05:00
Mike Christie
30bd7df8ce [SCSI] scsi_error: add target reset handler
The problem is that serveral drivers are sending a target reset from the
device reset handler, and if we have multiple devices a target reset gets
sent for each device when only one would be sufficient. And if we do a target
reset it affects all the commands on the target so the device reset handler
code only cleaning up one devices's commands makes programming the driver a
little more difficult than it should be.

This patch adds a target reset handler, which drivers can use to send
a target reset. If successful it cleans up the commands for a devices
accessed through that starget.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:15:41 -05:00
Geert Uytterhoeven
f7441a791a [SCSI] ps3rom: Simplify fill_from_dev_buffer()
As we no longer need to calculate the data length of the whole scatterlist,
we can abort the loop earlier and coalesce req_len and act_len into one
variable, making fill_from_dev_buffer() more similar to fetch_to_dev_buffer().

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:15:41 -05:00
FUJITA Tomonori
d1e4c9c57c [SCSI] scsi_debug: use shost_priv macro
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Douglas Gilbert <dougg@torque.net>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:15:41 -05:00
FUJITA Tomonori
96ad0dfe83 [SCSI] scsi_debug: remove unnecessary checking
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Douglas Gilbert <dougg@torque.net>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:15:41 -05:00
FUJITA Tomonori
9e603ca06a [SCSI] scsi_debug: remove scsi_debug.h
scsi_debug.h just incldues some function declarations. This patch removes it
with moving the scsi_host_template.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Douglas Gilbert <dougg@torque.net>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:15:41 -05:00
FUJITA Tomonori
9ff26eefd4 [SCSI] scsi_debug: stop including drivers/scsi/scsi.h
This converts scsi_debug to include header files in include/scsi/
instead of drivers/scsi/scsi.h.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Douglas Gilbert <dougg@torque.net>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:15:40 -05:00
Andi Kleen
9924a781f3 [SCSI] Remove random noop unchecked_isa_dma users
Lots of drivers set it to 0. Remove that. Patch should be a nop.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:15:40 -05:00
FUJITA Tomonori
b271f1c881 [SCSI] aacraid: READ_CAPACITY_16 shouldn't trust allocation length in cdb
When aacraid spoofs READ_CAPACITY_16, it assumes that the data length
in the sg list is equal to allocation length in cdb. But sg can put
any value in scb so the driver needs to check both the data length in
the sg list and allocation length in cdb.

If allocation length is larger than the response length that the
driver expects, it clears the data buffer in the sg list to zero but
it doesn't need to do. Just setting resid is fine.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Mark Salyzyn <Mark_Salyzyn@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:15:40 -05:00
Kai Makisara
b174be02f3 [SCSI] st: show options currently set in sysfs
Show the current binary tape driver and mode options is sysfs. A file
(options) is created in each directory in /sys/class/scsi_tape. The files
contain masks showing the options. The mask bit definitions are the same as
used when setting the options using the MTSETDRVBUFFER function in the
MTIOCTOP ioctl (defined in include/linux/mtio.h). For example:
> cat /sys/class/scsi_tape/nst0/options
0x00000d07

[jejb: updated doc with correction from Randy Dunlap]

Signed-off-by: Kai Makisara <kai.makisara@kolumbus.fi>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:15:40 -05:00
Kai Makisara
40f6b36c62 [SCSI] st: add option to use SILI in variable block reads
Add new option MT_ST_SILI to enable setting the SILI bit in reads in variable
block mode. If SILI is set, reading a block shorter than the byte count does
not result in CHECK CONDITION. The length of the block is determined using the
residual count from the HBA. Avoiding the REQUEST SENSE command for every
block speeds up some real applications considerably.

Signed-off-by: Kai Makisara <kai.makisara@kolumbus.fi>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:15:39 -05:00
Boaz Harrosh
d35055a0f2 [SCSI] gdth: remove command accessors
These are no longer necessary.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Tested-by: Joerg Dorchain: <joerg@dorchain.net>
Tested-by: Stefan Priebe <s.priebe@allied-internet.ag>
Tested-by: Jon Chelton <jchelton@ffpglobal.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:15:39 -05:00
Darrick J. Wong
68066c3ed1 [SCSI] aic94xx: Use sas_request_addr() to provide SAS WWN if the adapter lacks one
If the aic94xx chip doesn't have a SAS address in the chip's flash memory,
make libsas get one for us.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:15:39 -05:00
Darrick J. Wong
45e6cdf414 [SCSI] libsas: Provide a transport-level facility to request SAS addrs
Provide a facility to use the request_firmware() interface to get a SAS
address from userspace.  This can be used by SAS LLDDs that cannot
obtain the address from the host adapter.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:15:38 -05:00
FUJITA Tomonori
7e23ea4884 [SCSI] ips: sg chaining support to the path to non I/O commands
I overlooked ips_scmd_buf_write and ips_scmd_buf_read when I converted
ips to use the data buffer accessors.

ips is unlikely to use sg chaining (especially in this path) since a)
this path is used only for non I/O commands (with little data
transfer), b) ips's sg_tablesize is set to just 17.

Thanks to Tim Pepper for testing this patch.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Mark Salyzyn <Mark_Salyzyn@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:15:36 -05:00
Jeff Garzik
cff2680643 [SCSI] gdth: convert to PCI hotplug API
- remove PCI device sort, which greatly simplifies PCI probe,
  permitting direct, per-HBA function calls rather than an indirect
  route to the same end result.

- remove need for pcistr[]

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:15:36 -05:00
Jeff Garzik
4c9c8d782c [SCSI] gdth: PCI probe cleanups, prep for PCI hotplug API conversion
- Reduce uses of gdth_pci_str::pdev, preferring a local variable
  (or function arg) 'pdev' instead.

- Reduce uses of gdth_pcistr array, preferring local variable
  (or function arg) 'pcistr' instead.

- Eliminate lone use of gdth_pci_str::irq, using equivalent
  pdev->irq instead

- Eliminate assign-only gdth_pci_str::io_mm

Note:  If the indentation seems weird, that's because a line was
converted from spaces to tabs, when it was modified.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:15:36 -05:00
Hugh Dickins
164fc5dcd6 scsi: fix sense_slab/bio swapping livelock
Since 2.6.25-rc7, I've been seeing an occasional livelock on one x86_64
machine, copying kernel trees to tmpfs, paging out to swap.

Signature: 6000 pages under writeback but never getting written; most
tasks of interest trying to reclaim, but each get_swap_bio waiting for a
bio in mempool_alloc's io_schedule_timeout(5*HZ); every five seconds an
atomic page allocation failure report from kblockd failing to allocate a
sense_buffer in __scsi_get_command.

__scsi_get_command has a (one item) free_list to protect against this,
but rc1's [SCSI] use dynamically allocated sense buffer
de25deb180 upset that slightly.  When it
fails to allocate from the separate sense_slab, instead of giving up, it
must fall back to the command free_list, which is sure to have a
sense_buffer attached.

Either my earlier -rc testing missed this, or there's some recent
contributory factor.  One very significant factor is SLUB, which merges
slab caches when it can, and on 64-bit happens to merge both bio cache
and sense_slab cache into kmalloc's 128-byte cache: so that under this
swapping load, bios above are liable to gobble up all the slots needed
for scsi_cmnd sense_buffers below.

That's disturbing behaviour, and I tried a few things to fix it.  Adding
a no-op constructor to the sense_slab inhibits SLUB from merging it, and
stops all the allocation failures I was seeing; but it's rather a hack,
and perhaps in different configurations we have other caches on the
swapout path which are ill-merged.

Another alternative is to revert the separate sense_slab, using
cache-line-aligned sense_buffer allocated beyond scsi_cmnd from the one
kmem_cache; but that might waste more memory, and is only a way of
diverting around the known problem.

While I don't like seeing the allocation failures, and hate the idea of
all those bios piled up above a scsi host working one by one, it does
seem to emerge fairly soon with the livelock fix.  So lacking better
ideas, stick with that one clear fix for now.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Peter Zijlstra <a.p.ziljstra@chello.nl>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-06 16:10:08 -07:00
Ke Wei
0b977608e6 [SCSI] mvsas: check subsystem id
add support for mv6480 chip which subsystem id is 6480 in spite of device id is 6440.

Signed-off-by: Ke Wei <kewei@marvell.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-28 12:32:22 -05:00
Ke Wei
e9ff91b692 [SCSI] mvsas: get phy info.
removed unused code and attached SATA address makes use of port id.
enable HBA interrupt after calling sas_register_ha();

Signed-off-by: Ke Wei <kewei@marvell.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-28 12:32:09 -05:00
Ke Wei
963829e650 [SCSI] mvsas: fix the buffer of rx DMA overflow bug
fix the buffer of rx DMA overflow bug.
fix default queue depth.

Signed-off-by: Ke Wei <kewei@marvell.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-28 12:31:54 -05:00
Ke Wei
8121ed4202 [SCSI] mvsas: retry aborting task.
Signed-off-by: Ke Wei <kewei@marvell.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-28 12:31:40 -05:00
Ke Wei
4e52fc0a0a [SCSI] mvsas: check hd whether unplugged
if unplugged, driver's queuecommand function will return SAS_PHY_DOWN.
task->lldd_task is used for saving its slot info.

Signed-off-by: Ke Wei <kewei@marvell.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-28 12:31:25 -05:00
Ke Wei
1fce5e5da0 [SCSI] mvsas : interrupt handling
When a slot is busy, we will not free this slot until slot reset is
completed.  When unplugged the disk, we should release all command
tasks with unplugged port that have been sent.

If MVS_USE_TASKLET is defined, we can enable tasklet. Default is off.

Signed-off-by: Ke Wei <kewei@marvell.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-28 12:31:03 -05:00
Ke Wei
ee1f1c2ef9 [SCSI] mvsas: a tag handler implementation
add a new tag handler to create slot num. When a slot num is busy, new
task can't hit this bit which was already used.  plumb in phy speeds.

Signed-off-by: Ke Wei <kewei@marvell.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-28 12:27:54 -05:00
Ke Wei
0eb9ddd82a [SCSI] mvsas: fill in error info record and phy mode6 bits.
and remove some unused members from struct.

Signed-off-by: Ke Wei <kewei@marvell.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-28 12:27:16 -05:00
James Bottomley
15c73d5afd [SCSI] libsas: Warn if ATA device detected but CONFIG_SCSI_SAS_ATA not set
We give a very cryptic error if an ATA device is seen on a SAS port
but libsas isn't compiled to include libata to handle them.  Add an
extra warning to explain specifically what the problem is.

Acked-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-27 15:12:16 -07:00
James Smart
77cca462c6 [SCSI] hosts.c: fixes for "no error" reported after error scenarios
This patch corrects some cases in scsi_add_host() that fail, but the "error"
return code was not reset after a prior use which set it to a non-error value.

Patch cut against scsi-rc-fixes-2.6

Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-27 15:09:54 -07:00
James Bottomley
0feed274d2 Revert "[SCSI] fix bsg queue oops with iscsi logout"
This reverts commit 4b6f5b3a99.

bsg takes a reference to the underlying generic device, so it's
impossible to unregister bsg in the device release routine.

Acked-by: FUJITA Tomonori <tomof@acm.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-26 09:09:19 -07:00
Akinobu Mita
28aef2f7d9 [SCSI] a100u2w: fix bitmap lookup routine
This patch is only compile tested.

It seems that bitmap lookup routine for allocation_map in
a100u2w driver is simply wrong.

It cannot lookup more than first 32 bits. If all first 32 bits
are set, it just returns 33-th orc_scb even though the 33-th bit
is not set.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Tested-by: Alan Cox <alan@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-20 09:19:25 -05:00
Kay Sievers
4d1566ed21 [SCSI] fix media change events for polled devices
Commit:
  a341cd0f (SCSI: add asynchronous event notification API)
breaks:
  285e9670 (sr,sd: send media state change modification events)
by introducing an event filter, which is removed here, to make
events, we are depending on, happen again.

Fix this by removing the event filter.  It's pretty much broken at the
moment, since a user can't set it (the attribute being read only).  A
proper fix will be to make the event discriminator distinguish between
AN and Polled media change events.

Cc: David Zeuthen <david@fubar.dk>
Cc: kristen accardi <kaccardi@gmail.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-19 11:51:28 -05:00
Kay Sievers
c02e600280 [SCSI] sd, sr: do not emit change event at device add
Initialize the "state changed" flag, so we do not send a change event
immediately after registering a new device.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-19 11:28:56 -05:00
Sven Schnelle
1b96f8955a [SCSI] gdth: Allocate sense_buffer to prevent NULL pointer dereference
Fix NULL pointer dereference during execution of Internal commands,
where gdth only allocates scp, but not scp->sense_buffer. The rest of
the code assumes that sense_buffer is allocated, which leads to a kernel
oops e.g. on reboot (during cache flush).

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-14 20:31:18 -05:00
nickcheng
4d3995b14b [SCSI] arcmsr: fix iounmap error for Type B adapter
The Type B Adapter teardown does iounmap on pointers subtracted by a
constant offset.  Since the offset is in bytes, we need the pointers to
be of type void * not uint32_t * so the subtraction is done in the
correct units and we iounmap the correct area.

Signed-off-by: Nick Cheng <nick.cheng@areca.com.tw>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-14 15:25:26 -05:00
Mike Christie
4b6f5b3a99 [SCSI] fix bsg queue oops with iscsi logout
Delay bsg unregistration, because we want to wait until all the request/cmds
have released their reference.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-13 16:47:05 -05:00
James Bottomley
67951f6380 [SCSI] Fix dependency problems in SCSI drivers
We have several drivers that don't list SCSI as a dependency in
Kconfig.  That leads to them potentially being selected as Y even if
SCSI is M (which will produce a build failure).  Fix this by making
the if SCSI_LOWLEVEL that goes around all the drivers a tristate
forcing them all automatically to inherit the value of SCSI.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-08 18:30:19 -06:00
Matthew Wilcox
951b62c11e [SCSI] advansys: Fix bug in AdvLoadMicrocode
buf[i] can be up to 0xfd, so doubling it and assigning the result to an
unsigned char truncates the value.  Just use an unsigned int instead;
it's only a temporary.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-07 10:05:43 -06:00
Linus Torvalds
103926c689 Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (27 commits)
  [SCSI] mpt fusion: don't oops if NumPhys==0
  [SCSI] iscsi class: regression - fix races with state manipulation and blocking/unblocking
  [SCSI] qla4xxx: regression - add start scan callout
  [SCSI] qla4xxx: fix host reset dpc race
  [SCSI] tgt: fix build errors when dprintk is defined
  [SCSI] tgt: set the data length properly
  [SCSI] tgt: stop zero'ing scsi_cmnd
  [SCSI] ibmvstgt: set up scsi_host properly before __scsi_alloc_queue
  [SCSI] docbook: fix fusion source files
  [SCSI] docbook: fix scsi source file
  [SCSI] qla2xxx: Update version number to 8.02.00-k9.
  [SCSI] qla2xxx: Correct usage of inconsistent timeout values while issuing ELS commands.
  [SCSI] qla2xxx: Correct discrepancies during OVERRUN handling on FWI2-capable cards.
  [SCSI] qla2xxx: Correct needless clean-up resets during shutdown.
  [SCSI] arcmsr: update version and changelog
  [SCSI] ps3rom: disable clustering
  [SCSI] ps3rom: fix wrong resid calculation bug
  [SCSI] mvsas: fix phy sas address
  [SCSI] gdth: fix to internal commands execution
  [SCSI] gdth: bugfix for the at-exit problems
  ...
2008-03-05 17:49:59 -08:00
Mike Christie
45ab33b6c1 [SCSI] iscsi class: regression - fix races with state manipulation and blocking/unblocking
For qla4xxx, we could be starting a session, but some error (network,
target, IO from a device that got started, etc) could cause the session
to fail and curring the block/unblock and state manipulation could race
with each other. This patch just has those operations done in the
single threaded iscsi eh work queue, so that way they are serialized.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-05 12:04:09 -06:00
Mike Christie
024f801f52 [SCSI] qla4xxx: regression - add start scan callout
We are seeing EXIST errors from sysfs during device addition.
We need a start scan callout so we do not start scanning sessions
found during hba setup, before the async scsi scan code is ready.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Acked-by: David C Somayajulu <david.somayajulu@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-05 12:03:54 -06:00
Mike Christie
50a29aec9c [SCSI] qla4xxx: fix host reset dpc race
The host reset callout could be starting to reset the hba at the same
time the dpc thread is. This creates lots of problems because they both
want to do wierd things with the firmware and interrupts, etc.

This patch just has the host reset function fully shutdown the dpc
thread before resetting the hba.

This patch also moves the setting of the session online bit to fix
a potential race with the dpc thread and iscsi recovery thread.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Acked-by: David C Somayajulu <david.somayajulu@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-05 12:03:17 -06:00
Jens Axboe
e97a294ef6 scsi: missing add of padded bytes to io completion byte count
Original patch from Tejun Heo <htejun@gmail.com> but should use ->extra_len
and not ->data_len, as we would then overshoot the original request size.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-03-04 20:24:05 +01:00
FUJITA Tomonori
21f1e91d4b [SCSI] tgt: fix build errors when dprintk is defined
drivers/scsi/ibmvscsi/ibmvstgt.c: In function 'ibmvstgt_cmd_done':
drivers/scsi/ibmvscsi/ibmvstgt.c:292: error: 'cmd' undeclared (first use in this function)
drivers/scsi/ibmvscsi/ibmvstgt.c:292: error: (Each undeclared identifier is reported only once
drivers/scsi/ibmvscsi/ibmvstgt.c:292: error: for each function it appears in.)

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-03 13:19:52 -06:00
FUJITA Tomonori
cccddc2d15 [SCSI] tgt: set the data length properly
scsi_tgt uses REQ_TYPE_BLOCK_PC so scsi_init_io doesn't set the length
for us. scsi_tgt needs to do it by itself.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-03 13:19:35 -06:00
FUJITA Tomonori
36802e9989 [SCSI] tgt: stop zero'ing scsi_cmnd
The scsi midlayer allocates scsi_cmnd->sense_buffer dynamically so we
can't initialize scsi_cmnd (the midlyaer does for us).

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-03 13:19:18 -06:00
FUJITA Tomonori
b560665ce5 [SCSI] ibmvstgt: set up scsi_host properly before __scsi_alloc_queue
Before calling __scsi_alloc_queue, scsi_host->shost_gendev.parent must
be initialized properly.

This patch moves __scsi_alloc_queue after scsi_add_host (like
initiator drivers do).

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-03 13:19:03 -06:00
Randy Dunlap
79f5bb2839 [SCSI] docbook: fix scsi source file
Fix docbook problem in SCSI source files.
These cause the generated docbook to be incorrect.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-03 13:17:14 -06:00
Andrew Vasquez
ca3aefb822 [SCSI] qla2xxx: Update version number to 8.02.00-k9.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-03 13:11:50 -06:00
Andrew Vasquez
00a537b820 [SCSI] qla2xxx: Correct usage of inconsistent timeout values while issuing ELS commands.
The original code would incorrectly hardcode ELS timeout values
rather than using the traditional '2 * r_a_tov' value.  In some
cases, the hardcoded values would be larger than the
mailbox-command-timeout and result in a needless BIG_HAMMER (ISP
reset), the typical recovery mechanism employed in such cases.

The second defect in the original code was in the assignment of
the default 'ha->r_a_tov' to twice the traditional value.
Correct this by setting the value to 10 seconds.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-03 13:11:35 -06:00
Andrew Vasquez
3e8ce320cf [SCSI] qla2xxx: Correct discrepancies during OVERRUN handling on FWI2-capable cards.
For recent ISPs, software must detect OVERRUN conditions by
checking the SS_RESIDUAL_OVER bit during CS_COMPLETE handling.
Update the driver to perform this check, which is consistent with
what earlier firmwares did by explicitly cracking open the
FCP_RSP statuses and returning an CS_DATA_OVERRUN.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-03 13:11:18 -06:00
Andrew Vasquez
7c7f1f299b [SCSI] qla2xxx: Correct needless clean-up resets during shutdown.
There's no point in hitting the RISC with what will most
assuredly be an unsucessful reset of the RISC hardware if the
initial stop-firmware mailbox command fails with a time-out
status.  Instead, to avoid what could amount to a lengthy
stop-firmware/detect-failure/reset-risc loop, continue with
driver unloading and discard the stop-firmware requirement.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-03 13:10:58 -06:00
Nick Cheng
ba1cb4618b [SCSI] arcmsr: update version and changelog
The fix up from Daniel Drake for replacing GFP_DMA with something
more sensible has gone in here:

commit 69e562c234
Author: Daniel Drake <dsd@gentoo.org>
Date:   Wed Feb 20 13:29:05 2008 +0000

    [SCSI] arcmsr: fix message allocation

add a change log and update the version for this.

Signed-off-by: Nick Cheng <nick.cheng@areca.com.tw>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-03 13:10:22 -06:00
FUJITA Tomonori
57fd2b6c89 [SCSI] ps3rom: disable clustering
ps3rom does:

scsi_for_each_sg(cmd, sgpnt, scsi_sg_count(cmd), k) {
	kaddr = kmap_atomic(sg_page(sgpnt), KM_IRQ0);

We cannot do something like that with the clustering enabled (or we
can use scsi_kmap_atomic_sg).

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-03 13:08:13 -06:00
FUJITA Tomonori
67768f675f [SCSI] ps3rom: fix wrong resid calculation bug
sg driver rounds up the length in struct scatterlist to be a multiple
of 512 in some conditions. So LLDs can't use the data length in a sg
list to calculate residual. Instead, the length in struct scsi_cmnd
should be used.

[Geert: the variable buflen already contains scsi_bufflen(cmd)]

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-03 13:06:37 -06:00
Randy Dunlap
e59e4a0972 docbook: fix scsi source file
Fix docbook problem in SCSI source files.
These cause the generated docbook to be incorrect.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-03 10:47:13 -08:00
Ke Wei
00da714b31 [SCSI] mvsas: fix phy sas address
The phy sas address is showing wrongly (wrong endianness).  Fix up the
endian transforms to make this correct.

Signed-off-by: Ke Wei <kewei@marvell.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-29 11:03:20 -06:00
Boaz Harrosh
ee54cc6af9 [SCSI] gdth: fix to internal commands execution
The recent patch named:
  [SCSI] gdth: !use_sg cleanup and use of scsi accessors

has done a bad job in handling internal commands issued by gdth_execute().

Internal commands are issued with device gdth_cmd_str ready made directly
to the card, without any mapping or translations of scsi commands. So here
I added a gdth_cmd_str pointer to the gdth_cmndinfo private structure which
is then copied directly to host.

following this patch is a cleanup that removes the home cooked accessors
and reverts them to regular scsi_cmnd accessors. Since they are not used
anymore. After review maybe the 2 patches should be squashed together.

FIXME: There is still a problem with gdth_get_info(). as reported there
   is a WARN_ON trigerd in dma_free_coherent() when doing:
   $ cat /proc/sys/gdth/0

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Tested-by: Joerg Dorchain: <joerg@dorchain.net>
Tested-by: Stefan Priebe <s.priebe@allied-internet.ag>
Tested-by: Jon Chelton <jchelton@ffpglobal.com>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-27 15:54:26 -08:00
Boaz Harrosh
b31ddd31c2 [SCSI] gdth: bugfix for the at-exit problems
gdth_exit would first remove all cards then stop the timer
and would not sync with the timer function. This caused a crash
in gdth_timer() when module was unloaded.
So del_timer_sync the timer before we delete the cards.

also the reboot notifier function would crash. So clean
that up and fix the crashes.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Tested-by: Joerg Dorchain: <joerg@dorchain.net>
Tested-by: Stefan Priebe <s.priebe@allied-internet.ag>
Tested-by: Jon Chelton <jchelton@ffpglobal.com>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-27 15:53:43 -08:00
Mike Christie
31ed0bf439 [SCSI] iscsi regression: check for zero max session cmds
The old tools did not set max session cmds. This is a regression.
I removed the check when merging the power of 2 patch.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-27 15:52:46 -08:00
James Bottomley
e2396f1e4e [SCSI] aic94xx: fix TMF ascb handling to prevent sequencer panic
This is a particularly nasty bug.  The problem is that if any internal
ascb times out, currently we free it even though it's pending at the
sequencer.  This results in the sequencer getting terminally confused
and the error message:

BUG:sequencer:dl:no ascb

Being returned when it comes back.  The way to fix this is to manage
freeing the ascb from the tasklet completion routine, so that we only
free it when the sequencer actually returns it.  The code is also
altered to use on stack completions and transfer variables.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-24 00:40:57 -06:00
James Bottomley
8de3ef25a1 [SCSI] libsas: misc fixes to the eh path
- Correct one use after free of the sas task
- update the reset required path to move straight to LUN reset
- make the bigger hammer actually reset something instead of just trying
  to clear all the tasks.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-23 23:53:20 -06:00
James Bottomley
a29c051536 [SCSI] libsas: use the supplied address for SATA devices rather than changing it
Once the phy reset is plumbed in properly, SATA error handling fails
nastily because we change the port attached_sas_address using the WWN
field of the IDENTIFY message.  This is a nice thing to do in theory,
but it really destroys hotplug because any event on the port causes an
automatic mismatch between the sas_address the phy just picked up and
the one we propagate into the port.  However ugly they are, we have to
stick with the sas addresses made up by the phys and expanders.

Also does a few cosmetic changes to the way port printing is done to
make it clearer how a port is formed.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-23 23:53:04 -06:00
James Bottomley
63edf49e67 [SCSI] aic94xx: plumb in I_T_nexus_reset task management function
Currently aic94xx has no exported I_T_nexus_reset function.  This is a
bit of a huge problem, since sas_ata relies on this function to
perform an ATA phy reset and also it means that if abort fails, we
really have no bigger hammer to hit everything with.

Plumb in the I_T_nexus_reset by quiescing the sequencer, sending the
correct phy reset (link for ATA and hard for SAS) and then carefully
resuming the sequencer again.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-23 23:52:46 -06:00
James Bottomley
5319578ca3 [SCSI] libsas: export sas_find_local_phy function
This is needed by the to be added I_T reset function in aic94xx.  It
needs to know the local phy so it can send a link or hard reset along
the path.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-23 23:52:30 -06:00
James Bottomley
eea5ff7bde [SCSI] mvsas: remove execute permission from file
mvsas.c picked up execute permissions.  Move it back to being a plane
old file.

James Bottomley <James.Bottomley@HansenPartnership.com>

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-23 23:51:00 -06:00
Oliver Pinter
42e6de0e60 fix vmsas.c file permissions
Signed-off-by: Oliver Pinter <oliver.pntr@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-23 19:49:34 -08:00
Jeff Garzik
0a3716eb04 mvsas: fix build warning, clean prototypes
- Fix build 'make randconfig' build warning spotted by Toralf Foerster:

drivers/scsi/mvsas.c: In function 'mvs_hexdump':
drivers/scsi/mvsas.c:715: error: implicit declaration of function 'isalnum'

- Remove unneeded prototypes (spotted by hch)

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-23 17:52:36 -08:00
Linus Torvalds
b23c9cc0ce Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (25 commits)
  [SCSI] qlogicpt: section fixes
  [SCSI] mvsas: convert from rough draft to working driver
  [SCSI] mvsas: Add Marvell 6440 SAS/SATA driver
  [SCSI] libsas: correctly flush the LU queue on error recovery
  [SCSI] aic94xx: fix sequencer hang on error recovery
  [SCSI] st: compile fix when DEBUG set to one
  [SCSI] stex: stex_internal_copy should be called with sg_count in struct st_ccb
  [SCSI] stex: stex_direct_copy shouldn't call dma_map_sg
  [SCSI] lpfc: Balance locking
  [SCSI] qla4xxx: fix up residual handling
  [SCSI] libsas: fix error handling
  [SCSI] arcmsr: fix message allocation
  [SCSI] mptbase: fix use-after-free's
  [SCSI] iscsi transport: make 2 functions static
  [SCSI] lpfc: make lpfc_disable_node() static
  [SCSI] ips: fix data buffer accessors conversion bug
  [SCSI] gdth: don't call pci_free_consistent under spinlock
  [SCSI] qla2xxx: fix compile warning for printk format
  [SCSI] aic7xx: mitigate HOST_MSG_LOOP invalid SCB ff panic
  [SCSI] scsi_debug: disable clustering
  ...
2008-02-23 12:29:16 -08:00
Rafael J. Wysocki
3a2d5b7001 PM: Introduce PM_EVENT_HIBERNATE callback state
During the last step of hibernation in the "platform" mode (with the
help of ACPI) we use the suspend code, including the devices'
->suspend() methods, to prepare the system for entering the ACPI S4
system sleep state.

But at least for some devices the operations performed by the
->suspend() callback in that case must be different from its operations
during regular suspend.

For this reason, introduce the new PM event type PM_EVENT_HIBERNATE and
pass it to the device drivers' ->suspend() methods during the last phase
of hibernation, so that they can distinguish this case and handle it as
appropriate.  Modify the drivers that handle PM_EVENT_SUSPEND in a
special way and need to handle PM_EVENT_HIBERNATE in the same way.

These changes are necessary to fix a hibernation regression related
to the i915 driver (ref. http://lkml.org/lkml/2008/2/22/488).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Jeff Chua <jeff.chua.linux@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-23 10:40:04 -08:00
Adrian Bunk
cfb37ae1e9 [SCSI] qlogicpt: section fixes
In current mainline, __devinit qpti_sbus_probe() still is calling __init
qpti_chain_add().  Change occurrences of __init to __devinit to fix.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-23 09:07:32 -06:00
Ke Wei
8f261aaf9b [SCSI] mvsas: convert from rough draft to working driver
Convert rough draft Marvell 6440 driver to a working driver.
Added support for SAS and SATA devices, hotplug, wide port, and expanders.

Signed-off-by: Ke Wei <kewei@marvell.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-23 07:30:58 -06:00
Jeff Garzik
b576294826 [SCSI] mvsas: Add Marvell 6440 SAS/SATA driver
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-23 07:29:31 -06:00
James Bottomley
63e4563b9c [SCSI] libsas: correctly flush the LU queue on error recovery
The current sas_scsi_clear_queue_lu() is wrongly checking for commands
which match the pointer to the one passed in.  It should be checking for
commands which are on the same logical unit as the one passed in.  Fix
this by checking target pointer and LUN for equality.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-22 17:23:47 -06:00
James Bottomley
91b5506044 [SCSI] aic94xx: fix sequencer hang on error recovery
The clear nexus I_T and clear nexus I_T_L functions in the aic94xx
specify the SUSPEND_TX flag which causes the sequencer to be suspended
until it receives a RESUME_TX.  Unfortunately, nothing ever sends the
resume, so the sequencer on the link is stopped forever, leading to
eventual timeouts and I/O errors.

Since clear nexus commands are only executed as part of error recovery,
it's perfectly fine to keep the sequencer running on the link ... as
soon as the recovery function is completed, we'll send it the commands
to retry.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-22 17:23:36 -06:00
Kai Makisara
deee13dfd6 [SCSI] st: compile fix when DEBUG set to one
Remove the now useless counting of adjacent pages from the debugging code in
to make it compile when DEBUG is set non-zero.

Signed-off-by: Kai Makisara <kai.makisara@kolumbus.fi>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-22 17:21:37 -06:00
FUJITA Tomonori
c9872fe1ad [SCSI] stex: stex_internal_copy should be called with sg_count in struct st_ccb
stex_internal_copy copies an in-kernel buffer to a sg list by using
scsi_kmap_atomic_sg. Some functions calls stex_internal_copy with
sg_count in struct st_ccb, which is the value that dma_map_sg
returned. However it might be shorter than the actual number of sg
entries (if the IOMMU merged the sg entries).

scsi_kmap_atomic_sg doesn't see sg->dma_length so stex_internal_copy
should be called with the actual number of sg entries
(i.e. scsi_sg_count), because if the sg entries were merged,
stex_direct_copy wrongly think that the data length in the sg list is
shorter than the actual length.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-22 17:20:59 -06:00
FUJITA Tomonori
26106e3ca3 [SCSI] stex: stex_direct_copy shouldn't call dma_map_sg
stex_direct_copy copies an in-kernel buffer to a sg list in order to
spoof some SCSI commands. stex_direct_copy calls dma_map_sg and then
stex_internal_copy with the value that dma_map_sg returned. It calls
scsi_kmap_atomic_sg to copy data.

scsi_kmap_atomic_sg doesn't see sg->dma_length so if dma_map_sg merges
sg entries, stex_internal_copy gets the smaller number of sg entries
than the acutual number, which means it wrongly think that the data
length in the sg list is shorter than the actual length.

stex_direct_copy shouldn't call dma_map_sg and it doesn't need since
this code path doesn't involve dma transfers. This patch removes
stex_direct_copy and simply calls stex_internal_copy with the actual
number of sg entries.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-22 17:20:39 -06:00
Matthew Wilcox
eafe1df9e3 [SCSI] lpfc: Balance locking
Commit 3163f725a5 introduced locking in
lpfc_sli_hbqbuf_fill_hbqs, but missed unlocking on one exit.

Reported-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Acked-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-22 17:15:35 -06:00
David Somayajulu
65fecc77f3 [SCSI] qla4xxx: fix up residual handling
the check in the residual case has an incorrect test of scsi_status
(the logic is reversed, it should be scsi_status != 0 instead of
!scsi_status.  Since we checked a few lines above that scsi_status was
non-zero, just eliminate this test

Signed-off-by: David C Somayajulu <david.somayajulu@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-22 17:14:12 -06:00
James Bottomley
a8e14fec16 [SCSI] libsas: fix error handling
The libsas error handler has two fairly fatal bugs

1. scsi_sas_task_done calls scsi_eh_finish_cmd() too early.  This
   happens if the task completes after it has been aborted but before
   the error handler starts up.  Because scsi_eh_finish_cmd()
   decrements host_failed and adds the task to the done list, the
   error handler start check (host_failed == host_busy) never passes
   and the eh never starts.

2. The multiple task completion paths sas_scsi_clear_queue_... all
   simply delete the task from the error queue.  This causes it to
   disappear into the ether, since a command must be placed on the
   done queue to be finished off by the error handler.  This behaviour
   causes the HBA to hang on pending commands.

Fix 1. by moving the SAS_TASK_STATE_ABORTED check to an exit clause at
the top of the routine and calling ->scsi_done() unconditionally (it
is a nop if the timer has fired).  This keeps the task in the error
handling queue until the eh starts.

Fix 2. by making sure every task goes through task complete followed
by scsi_eh_finish_cmd().

Tested this by firing resets across a disk running a hammer test (now
it actually survives without hanging the system)

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-22 16:57:14 -06:00
Daniel Drake
69e562c234 [SCSI] arcmsr: fix message allocation
arcmsr_iop_message_xfer() is called from atomic context under the
queuecommand scsi_host_template handler. James Bottomley pointed out
that the current GFP_KERNEL|GFP_DMA flags are wrong: firstly we are in
atomic context, secondly this memory is not used for DMA.
Also removed some unneeded casts.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Cc: Nick Cheng <nick.cheng@areca.com.tw>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-22 09:08:13 -06:00
Adrian Bunk
3b0f208a58 [SCSI] iscsi transport: make 2 functions static
This patch makes the following needlessly global functions static:
- __iscsi_unblock_session()
- iscsi_session_state_name()

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-22 09:08:12 -06:00
Adrian Bunk
4d9db01ef8 [SCSI] lpfc: make lpfc_disable_node() static
This patch makes the needlessly global lpfc_disable_node() static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: James Smart <James.Smart@Emulex.Com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-22 09:08:12 -06:00
FUJITA Tomonori
2b28a4721e [SCSI] ips: fix data buffer accessors conversion bug
This fixes a bug that can't handle a passthru command with more than
two sg entries.

Big thanks to Tim Pepper for debugging the problem.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Mark Salyzyn <Mark_Salyzyn@adaptec.com>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-19 10:49:27 -06:00
James Bottomley
dde2020754 libata: eliminate the home grown dma padding in favour of
that provided by the block layer

ATA requires that all DMA transfers begin and end on word boundaries.
Because of this, a large amount of machinery grew up in ide to adjust
scatterlists on this basis.  However, as of 2.5, the block layer has a
dma_alignment variable which ensures both the beginning and length of a
DMA transfer are aligned on the dma_alignment boundary.  Although the
block layer does adjust the beginning of the transfer to ensure this
happens, it doesn't actually adjust the length, it merely makes sure
that space is allocated for transfers beyond the declared length.  The
upshot of this is that scatterlists may be padded to any size between
the actual length and the length adjusted to the dma_alignment safely
knowing that memory is allocated in this region.

Right at the moment, SCSI takes the default dma_aligment which is on a
512 byte boundary.  Note that this aligment only applies to transfers
coming in from user space.  However, since all kernel allocations are
automatically aligned on a minimum of 32 byte boundaries, it is safe to
adjust them in this manner as well.

tj: * Adjusting sg after padding is done in block layer.  Make libata
      set queue alignment correctly for ATAPI devices and drop broken
      sg mangling from ata_sg_setup().
    * Use request->raw_data_len for ATAPI transfer chunk size.
    * Killed qc->raw_nbytes.
    * Separated out killing qc->n_iter.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-02-19 11:36:56 +01:00
Tejun Heo
6b00769fe1 block: add request->raw_data_len
With padding and draining moved into it, block layer now may extend
requests as directed by queue parameters, so now a request has two
sizes - the original request size and the extended size which matches
the size of area pointed to by bios and later by sgs.  The latter size
is what lower layers are primarily interested in when allocating,
filling up DMA tables and setting up the controller.

Both padding and draining extend the data area to accomodate
controller characteristics.  As any controller which speaks SCSI can
handle underflows, feeding larger data area is safe.

So, this patch makes the primary data length field, request->data_len,
indicate the size of full data area and add a separate length field,
request->raw_data_len, for the unmodified request size.  The latter is
used to report to higher layer (userland) and where the original
request size should be fed to the controller or device.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-02-19 11:36:35 +01:00
James Bottomley
ff83efacf2 [SCSI] gdth: don't call pci_free_consistent under spinlock
The spinlock is held over too large a region: pscratch is a permanent
address (it's allocated at boot time and never changes).  All you need
the smp lock for is mediating the scratch in use flag, so fix this by
moving the spinlock into the case where we set the pscratch_busy flag
to false.

Cc: Stable Tree <stable@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-18 09:02:25 -06:00
FUJITA Tomonori
279e7f5425 [SCSI] qla2xxx: fix compile warning for printk format
scsi/qla2xxx/qla_dfs.c: In function 'qla2x00_dfs_fce_show':
scsi/qla2xxx/qla_dfs.c:26: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'uint64_t'

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-18 08:57:17 -06:00
James Bottomley
5e2f22d39e [SCSI] aic7xx: mitigate HOST_MSG_LOOP invalid SCB ff panic
The panic occurs if we get a MSGIN or MSGOUT for an unidentified SCB
(meaning we didn't identify the outstanding command it was for).  For
MSGIN this is wrong because it could be an unsolicited negotiation
MSGIN from the target.

Still panic on unsolicited MSGOUT because this would represent a
mistake in the negotiation phases.  However, we should fix this as
well.  The specs say we should go to bus free for unexpected msgin.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-18 08:57:17 -06:00
FUJITA Tomonori
cbccc20712 [SCSI] scsi_debug: disable clustering
scsi_debug does at several places:

for_each_sg(sdb->table.sgl, sg, sdb->table.nents, k) {
	kaddr = (unsigned char *)
		kmap_atomic(sg_page(sg), KM_USER0);

We cannot do something like that with the clustering enabled (or we
can use scsi_kmap_atomic_sg).

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Douglas Gilbert <dougg@torque.net>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-18 08:57:16 -06:00
James Bottomley
0e935c9eba [SCSI] fas216: fix up the previous fas216 commit
Apparently the fix to [SCSI] fas216: Use scsi_eh API for REQUEST_SENSE
invocation didn't show up in the final version sent to linus.

Correct this omission.

Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-18 08:57:16 -06:00
Alan Cox
7d1abbe824 [SCSI] megaraid: outb_p extermination
From conversations with the maintainers the _p isn't needed so kill it.
That removes the last non ISA _p user from the SCSI layer to my knowledge.

Signed-off-by: Alan Cox <alan@redhat.com>
Acked-by: "Yang, Bo" <Bo.Yang@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-18 08:57:16 -06:00
James Bottomley
cb84e2d2ff [SCSI] aic94xx: fix REQ_TASK_ABORT and REQ_DEVICE_RESET
This driver has been failing under heavy load with

aic94xx: escb_tasklet_complete: REQ_TASK_ABORT, reason=0x6
aic94xx: escb_tasklet_complete: Can't find task (tc=4) to abort!

The second message is because the driver fails to identify the task
it's being asked to abort.  On closer inpection, there's a thinko in
the for each task loop over pending tasks in both the REQ_TASK_ABORT
and REQ_DEVICE_RESET cases where it doesn't look at the task on the
pending list but at the one on the ESCB (which is always NULL).

Fix by looking at the right task.  Also add a print for the case where
the pending SCB doesn't have a task attached.

Not sure if this will fix all the problems, but it's a definite first
step.

Cc: Stable Tree <stable@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-18 08:57:15 -06:00
Yinghai Lu
691b4773aa [SCSI] ses: fix data corruption
one system: initrd get courrupted:

RAMDISK: Compressed image found at block 0
RAMDISK: incomplete write (-28 != 2048) 134217728
crc error
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 388k freed
init_special_inode: bogus i_mode (177777)
Warning: unable to open an initial console.
init_special_inode: bogus i_mode (177777)
init_special_inode: bogus i_mode (177777)
Kernel panic - not syncing: No init found.  Try passing init= option to kernel.

bisected to
commit 9927c68864
Author: James Bottomley <James.Bottomley@HansenPartnership.com>
Date:   Sun Feb 3 15:48:56 2008 -0600

    [SCSI] ses: add new Enclosure ULD

changes:
1. change char to unsigned char to avoid type change later.
2. preserve len for page1
3. need to move desc_ptr even the entry is not enclosure_component_device/raid.
   so keep desc_ptr on right position
4. record page7 len, and double check if desc_ptr out of boundary before touch.
5. fix typo in subenclosure checking: should use hdr_buf instead.

[jejb: style fixes]

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-18 08:57:15 -06:00
Sergio Luis
99109301d1 [SCSI] gdth: update deprecated pci_find_device
Fix compilation warning in gdth.c, which was using the deprecated
pci_find_device.

drivers/scsi/gdth.c:645: warning: 'pci_find_device' is deprecated (declared at include/linux/pci.h:495)

Changing it to use pci_get_device, instead.

Signed-off-by: Sergio Luis <sergio@larces.uece.br>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-13 09:33:10 -06:00
Boaz Harrosh
61c92814dc [SCSI] gdth: scan for scsi devices
The patch: "gdth: switch to modern scsi host registration"

missed one simple fact when moving a way from scsi_module.c.
That is to call scsi_scan_host() on the probed host.
With this the gdth driver from 2.6.24 is again able to
see drives and boot.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Tested-by: Joerg Dorchain <joerg@dorchain.net>
Tested-by: Stefan Priebe <s.priebe@allied-internet.ag>
Tested-by: Jon Chelton <jchelton@ffpglobal.com>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-13 09:32:05 -06:00
James Bottomley
c958d767dc [SCSI] sym53c416: fix module parameters
It looks like there's been a bug in the module parameter setup forever.
The upshot doesn't really matter, because even if no parameters are ever
set, we just call sym53c416_setup() three times, but the zero values in
the arrays eventually cause nothing to happen.  Unfortunately gcc has
started to notice this now too:

drivers/scsi/sym53c416.c: In function 'sym53c416_detect':
drivers/scsi/sym53c416.c:624: warning: the address of 'sym53c416' will always evaluate as 'true'
drivers/scsi/sym53c416.c:630: warning: the address of 'sym53c416_1' will always evaluate as 'true'
drivers/scsi/sym53c416.c:636: warning: the address of 'sym53c416_2' will always evaluate as 'true'
drivers/scsi/sym53c416.c:642: warning: the address of 'sym53c416_3' will always evaluate as 'true'

So fix this longstanding bug to keep gcc quiet.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-12 15:24:58 -06:00
James Smart
e390bc0a26 [SCSI] lpfc 8.2.5 : Update lpfc driver version to 8.2.5
Update lpfc driver version to 8.2.5

Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11 17:52:58 -06:00
James Smart
3163f725a5 [SCSI] lpfc 8.2.5 : Fix buffer leaks
Fix buffer leaks:
- HBQ dma buffer leak at dma_pool_destroy when unloading driver
- Fix missing buffer free in slow ring buffer handling

Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11 17:52:58 -06:00
James Smart
7f5f3d0d02 [SCSI] lpfc 8.2.5 : Miscellaneous discovery Fixes
Miscellaneous discovery fixes:
- Flush RSCN buffers on vports when reseting HBA.
- Fix incorrect FLOGI after vport reg failed
- Fix a potential fabric ELS race condition
- Fix handling of failed PLOGI command under high lip rates
- Fix FDISC handling
- Fix debug logging for npiv handling

Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11 17:52:58 -06:00
James Smart
db2378e091 [SCSI] lpfc 8.2.5 : Add MSI-X single message support
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11 17:52:57 -06:00
James Smart
1b32f6aa99 [SCSI] lpfc 8.2.5 : Miscellaneous Fixes
Miscellaneous fixes:
- Fix ERRATT flag which was overlapping
- Allow RESTART mbx commands through when stopped.
- Accept incoming PLOGI when connected to an N_Port.
- Fix NPort to NPort pt2pt problems: ADISC and reg_vpi issues
- Fix vport unloading error that erroneously cleaned up RSCN buffers
- Fix memory leak during repeated unloads - in mbox handling
- Fix link bounce vs FLOGI race conditions

Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11 17:52:57 -06:00
James Smart
e47c909353 [SCSI] lpfc 8.2.5 : Correct ndlp referencing issues
Correct ndlp referencing issues:
- Fix ndlp kref issues due to race conditions between threads
- Fix cancel els delay retry event which missed an ndlp reference count

Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11 17:52:57 -06:00
Boaz Harrosh
90b0c41829 [SCSI] aic94xx: fix ABORT_TASK define conflict
include/scsi/scsi.h as a definition:
#define ABORT_TASK          0x0d

on the other hand drivers/scsi/aic94xx/aic94xx_sas.h has:
#define ABORT_TASK              0x03

rename the latter to SCB_ABORT_TASK

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11 13:36:31 -06:00
Boaz Harrosh
ccf9ea91ab [SCSI] fas216: Use scsi_eh API for REQUEST_SENSE invocation
Use new scsi_eh_prep/restor_cmnd() for synchronous REQUEST_SENSE
invocation.  This also converts the driver to the new accessor based
scatterlist implementation.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11 12:43:12 -06:00
Yinghai Lu
7c46c20aef [SCSI] ses: fix memory leaks
fix leaking with scomp leaking when failing. Also free page10 on
driver removal and remove one extra space.

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11 11:00:48 -06:00
Salyzyn, Mark
95f6fb5789 [SCSI] aacraid: informational sysfs value corrections
Some sysfs problems reported. The serial number on late model
controllers was truncated. Non-DASD devices (tapes and CDROMs) were
showing up as JBOD in the level report on the physical channel.

Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11 10:20:54 -06:00
Salyzyn, Mark
2f7ecc55b3 [SCSI] aacraid: ignore adapter reset check polarity
The Adapter's Ignore Reset flag and insmod parameter boolean polarity
is incorrect in the driver.

Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11 10:20:54 -06:00
Salyzyn, Mark
8ef2224707 [SCSI] aacraid: add optional MSI support
Added support for MSI utilizing the aacraid.msi=1 parameter. This
patch adds some localized or like-minded janitor fixes. Since the
default is disabled, there is no impact on the code paths unless the
customer wishes to experiment with the MSI performance.

Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11 10:20:54 -06:00
Thomas Horsten
90a95af85f [SCSI] MegaRAID driver management char device moved to misc
The MegaRAID driver's common management module (megaraid_mm.c) creates a
char device used by the management tool "megarc" from LSI Logic (and
possibly other management tools).

In 2.6 with udev, this device doesn't get created because it is not
registered in sysfs.

I first fixed this by registering a class "megaraid_mm", but realized that
this should probably be moved to misc devices, instead of taking up a char
major.  This is because only 1 device is used, even if there are multiple
adapters - the minor is never used (the adapter info is in the ioctl block
sent to the driver, not detected based on the minor number as one might
think).  So it is a complete waste to have an entire major taken by this.

So it now uses a misc device which I named "megadev0" (the name that megarc
expects), and has a dynamic minor (previoulsy a dynamic major was used).

I have tested this on my own system with the megarc tool, and it works just
as fine as before (only now the device gets created correctly by udev).

Acked-by: "Patro, Sumant" <Sumant.Patro@lsi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11 10:20:53 -06:00
FUJITA Tomonori
7d5d408c77 [SCSI] advansys: fix overrun_buf aligned bug
struct asc_dvc_var needs overrun buffer to be placed on an 8 byte
boundary. advansys defines struct asc_dvc_var:

struct asc_dvc_var {
	...
	uchar overrun_buf[ASC_OVERRUN_BSIZE] __aligned(8);

The problem is that struct asc_dvc_var is placed on
shost->hostdata. So if the hostdata is not on an 8 byte boundary, the
advansys crashes. The hostdata is placed on a sizeof(unsigned long)
boundary so the 8 byte boundary is not garanteed with x86_32.

With 2.6.23 and 2.6.24, the hostdata is on an 8 byte boundary by
chance, but with the current git, it's not.

This patch removes overrun_buf static array and use kzalloc.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11 10:20:53 -06:00
Sam Ravnborg
a3eadd7cb0 scsi: fix makefile for aic7(3*x)
Fix bug introduced by my latest fix to the aic7xxx Makefile.
Test build on x86 32 and 64 bit.
Without and with -j (parallel build)
Building firmaware is br0ken with O=... but this
is unrelated to this bug-fix.

Tested-by: Adrian Bunk <bunk@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-02-09 10:43:58 +01:00
Nick Piggin
a13ff0bb3f Convert SG from nopage to fault.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Douglas Gilbert <dougg@torque.net>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 19:09:22 -08:00
Salyzyn, Mark
8e31e607ea [SCSI] aacraid: do not set valid bit in sense information
Luben Tuikov [mailto:ltuikov@yahoo.com] sez:
> Just as in your case and Tony's case, which I presume
> uses the same RAID firmware vendor, it would've
> probably been better if the RAID firmware vendor
> fixed the firmware to not set the VALID bit if the
> INFORMATION field is not valid.

Point taken regarding the aacraid driver. Dropped the VALID bit, and
then did some cleanup/simplification of the set_sense procedure and
the associated parameters. Mike did some preliminary tests when the
VALID bit was dropped before the 'Re: [PATCH] [SCSI] sd: make error
handling more robust' patches came on the scene. The change in the
SCSI subsystem does make this enclosed aacraid patch unnecessary, so
this aacraid patch is merely post battle ground cleanup. If the
simplification is an issue, repugnant, too much for a back-port to the
stable trees or clouds the point, this patch could be happily
distilled down to:

diff -ru a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
--- a/drivers/scsi/aacraid/aachba.c     2008-02-06 16:26:45.834938955 -0500
+++ b/drivers/scsi/aacraid/aachba.c     2008-02-06 16:32:01.109035329 -0500
@@ -865,7 +865,7 @@
                         u32 residue)
 {
-        sense_buf[0] = 0xF0;    /* Sense data valid, err code 70h (current error) */
+        sense_buf[0] = 0x70;    /* Sense data invalid, err code 70h (current error) */
         sense_buf[1] = 0;       /* Segment number, always zero */

         if (incorrect_length) {

Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:31:51 -06:00
James Bottomley
9927c68864 [SCSI] ses: add new Enclosure ULD
This adds support to SCSI for enclosure services devices. It also makes
use of the enclosure services added in an earlier patch to display the
enclosure topology in sysfs.

At the moment, the enclosures are SAS specific, but if anyone actually
has a non-SAS enclosure that follows the SES-2 standard, we can add that
as well.

On my Vitesse based system, the enclosures show up like this:

sparkweed:~# ls -l /sys/class/enclosure/0\:0\:1\:0/
total 0
-r--r--r-- 1 root root 4096 2008-02-03 15:44 components
lrwxrwxrwx 1 root root    0 2008-02-03 15:44 device -> ../../../devices/pci0000:01/0000:01:02.0/host0/port-0:0/expander-0:0/port-0:0:12/end_device-0:0:12/target0:0:1/0:0:1:0
drwxr-xr-x 2 root root    0 2008-02-03 15:44 SLOT 000
drwxr-xr-x 2 root root    0 2008-02-03 15:44 SLOT 001
drwxr-xr-x 2 root root    0 2008-02-03 15:44 SLOT 002
drwxr-xr-x 2 root root    0 2008-02-03 15:44 SLOT 003
drwxr-xr-x 2 root root    0 2008-02-03 15:44 SLOT 004
drwxr-xr-x 2 root root    0 2008-02-03 15:44 SLOT 005
lrwxrwxrwx 1 root root    0 2008-02-03 15:44 subsystem -> ../../enclosure
--w------- 1 root root 4096 2008-02-03 15:44 uevent

And the individual occupied slots like this:

sparkweed:~# ls -l /sys/class/enclosure/0\:0\:1\:0/SLOT\ 001/
total 0
-rw-r--r-- 1 root root 4096 2008-02-03 15:45 active
lrwxrwxrwx 1 root root    0 2008-02-03 15:45 device -> ../../../../devices/pci0000:01/0000:01:02.0/host0/port-0:0/expander-0:0/port-0:0:11/end_device-0:0:11/target0:0:0/0:0:0:0
-rw-r--r-- 1 root root 4096 2008-02-03 15:45 fault
-rw-r--r-- 1 root root 4096 2008-02-03 15:45 locate
-rw-r--r-- 1 root root 4096 2008-02-03 15:45 status
lrwxrwxrwx 1 root root    0 2008-02-03 15:45 subsystem -> ../../../enclosure_component
-r--r--r-- 1 root root 4096 2008-02-03 15:45 type
--w------- 1 root root 4096 2008-02-03 15:45 uevent

You can flash the various blinky lights by echoing to the fault and locate files.

>From the device's point of view, you can see it has an enclosure like this:

sparkweed:~# ls /sys/class/scsi_disk/0\:0\:0\:0/device/
block:sda                     generic        queue_depth          state
bsg:0:0:0:0                   iocounterbits  queue_type           subsystem
bus                           iodone_cnt     rescan               timeout
delete                        ioerr_cnt      rev                  type
device_blocked                iorequest_cnt  scsi_device:0:0:0:0  uevent
driver                        modalias       scsi_disk:0:0:0:0    vendor
enclosure_component:SLOT 001  model          scsi_generic:sg0
evt_media_change              power          scsi_level

Note the enclosure_component:SLOT 001 which shows where in the enclosure
this device fits.

The astute will notice that I'm using SCSI VPD Inquiries to identify the
devices.  This, unfortunately, won't work for SATA devices unless we do
some really nasty hacking about on the SAT because the only think that
knows the SAS addresses for SATA devices is libsas, not libata where the
SAT resides.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:04:10 -06:00
James Bottomley
38582a62ec [SCSI] sr: fix test unit ready responses
Commit 210ba1d172 updated sr.c to use
the scsi_test_unit_ready() function.  Unfortunately, this has the
wrong characteristic of eating NOT_READY returns which sr.c relies on
for tray status.

Fix by rolling an internal sr_test_unit_ready() that doesn't do this.

Tested-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:44 -06:00
Roel Kluin
d6a451dd4d [SCSI] u14-34f: fix data direction bug
Direction of data transfer 'DMA_FROM_DEVICE' was tested twice. DTD_OUT
means  transfer from host to device. This should occur when the
direction of data transfer (sc_data_direction) is 'DMA_TO_DEVICE'.

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:44 -06:00
Salyzyn, Mark
62e9f5c467 [SCSI] aacraid: pci_set_dma_max_seg_size opened up for late model controllers
This patch ensures that the modern adapters get a maximum sg segment
size on par with the maximum transfer size. Added some localized
janitor fixes to the discussion patch I used with Fujita.

FUJITA Tomonori [mailto:fujita.tomonori@lab.ntt.co.jp] sez:
> I think that setting the proper maximum segment size for the late
> model cards (as you did above) makes sense.

Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:44 -06:00
Tony Battersby
4d2de3a50c [SCSI] fix BUG when sum(scatterlist) > bufflen
When sending a SCSI command to a tape drive via the SCSI Generic (sg)
driver, if the command has a data transfer length more than
scatter_elem_sz (32 KB default) and not a multiple of 512, then I either
hit BUG_ON(!valid_dma_direction(direction)) in dma_unmap_sg() or else
the command never completes (depending on the LLDD).

When constructing scatterlists, the sg driver rounds up the scatterlist
element sizes to be a multiple of 512.  This can result in
sum(scatterlist lengths) > bufflen.  In this case, scsi_req_map_sg()
incorrectly sets bio->bi_size to sum(scatterlist lengths) rather than to
bufflen.  When the command completes, req_bio_endio() detects that
bio->bi_size != 0, and so it doesn't call bio_endio().  This causes the
command to be resubmitted, resulting in BUG_ON or the command never
completing.

This patch makes scsi_req_map_sg() set bio->bi_size to bufflen rather
than to sum(scatterlist lengths), which fixes the problem.

Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Acked-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:44 -06:00
Nick Cheng
76d78300a6 [SCSI] arcmsr: updates (1.20.00.15)
- add arcmsr_enable_eoi_mode()and readl(reg->iop2drv_doorbell_reg) in
  arcmsr_handle_hbb_isr() on adapter Type B in case of the doorbell
  interrupt clearance is cached

- add conditional declaration for arcmsr_pci_error_detected() and
  arcmsr_pci_slot_reset

- check if the sg list member number exceeds arcmsr default limit in
  arcmsr_build_ccb()

- change the returned value type of arcmsr_build_ccb()from "void" to
  "int" returns FAILED in arcmsr_queue_command()

- modify arcmsr_drain_donequeue() to ignore unknown command and let
  kernel process command timeout.  This could handle IO request violating
  maximum segments, i.e.  Linux XFS over DM-CRYPT.  Thanks to Milan Broz's
  comments <mbroz@redhat.com>

- fix the release of dma memory for type B in arcmsr_free_ccb_pool()

- fix the arcmsr_polling_hbb_ccbdone()

Signed-off-by: Nick Cheng <nick.cheng@areca.com.tw>
Cc: Milan Broz <mbroz@redhat.com>
Cc: <thenzl@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:44 -06:00
Adrian Bunk
63adcc5862 [SCSI] advansys: make 3 functions static
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:43 -06:00
Andrew Morton
8144f2137b [SCSI] dc395x: fix uninitialized var warning
drivers/scsi/dc395x.c: In function 'dc395x_init_one':
drivers/scsi/dc395x.c:4270: warning: 'ptr' may be used uninitialized in this function

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:43 -06:00
James Bottomley
a2c6ef7136 [SCSI] NCR53C9x: remove driver
Acked-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:43 -06:00
James Bottomley
642978beb4 [SCSI] remove m68k NCR53C9x based drivers
These drivers depend on the deprecated NCR53C9X core and need to be converted
to the esp_scsi core.

Acked-by: Boaz Harrosh <bharrosh@panasas.com>
Cc: Linux/m68k <linux-m68k@vger.kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:42 -06:00
James Bottomley
da19d2f532 [SCSI] dec_esp: Remove driver
This driver depends on the deprecated NCR53C9X core and needs to be converted
to the esp_scsi core.

Acked-by: Boaz Harrosh <bharrosh@panasas.com>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:42 -06:00
Randy Dunlap
14f501a4b7 [SCSI] kernel-doc: fix scsi docbook
Add missing function parameter descriptions.
Make function short description fit on one line as required.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:42 -06:00
James Bottomley
366c246de9 [SCSI] sd: handle bad lba in sense information
Some devices report medium error locations incorrectly.  Add guards to
make sure the reported bad lba is actually in the request that caused
it.  Additionally remove the large case statment for sector sizes and
replace it with the proper u64 divisions.

Tested-by: Mike Snitzer <snitzer@gmail.com>
Cc: Stable Tree <stable@kernel.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:41 -06:00
Andrew Vasquez
d7402cd910 [SCSI] qla2xxx: Update version number to 8.02.00-k8.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:40 -06:00
Andrew Vasquez
e6e074f175 [SCSI] qla2xxx: Correct issue where incorrect init-fw mailbox command was used on non-NPIV capable ISPs.
BIT_2 of the firmware attributes is only valid on FW-interface-2
type HBAs.  Code in commit
c48339decc would cause the
incorrect initialize-firmware mailbox command to be issued for
non-NPIV capable ISPs.  Correct this by reverting to previously
used (and correct) pre-condition 'if' check.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:40 -06:00
Seokmann Ju
da4541b63b [SCSI] qla2xxx: Access the proper 'physical' port in FC-transport callbacks.
For following fc_host specific attributes, vports rely on the pport.
 So, this patch changed way to access the data for those attributes so that
 they can access pport's.
 - get_host_speed (speed)
 - get_host_port_state (port_state)
 - get_host_port_type (port_type)
 - get_fc_host_stats

Also, added PORT_SPEED_8GB case in the speed attribute for 8Gb HBAs.

Signed-Off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:40 -06:00
Seokmann Ju
99363ef81c [SCSI] qla2xxx: Correct issue where vport-state was not updated during an ISP_ABORT_NEEDED requst.
While running IO simultaneously through physical port and virtual
port, if user changes Data Rate (from scli utility), IO through
virtual port fails.  It failed because the vport had not received
the ISP_ABORT_NEEDED notification.

Signed-Off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:39 -06:00
Andrew Vasquez
963b0fdd3a [SCSI] qla2xxx: Move RISC-interrupt-register modifications to qla2x00_request_irqs().
There's no functional change involved with this update, instead
it simply migrates the "set cleared interrupt state" codes to a
more approprate method, qla2x00_request_irqs(), and cleans-up the
driver's probe() logic.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:39 -06:00
Andrew Vasquez
3db0652ef9 [SCSI] qla2xxx: Consolidate RISC-parity enablement codes.
Collapse duplicate codes called during probe() and RISC-reset
into qla2x00_setup_chip().

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:39 -06:00
Andrew Vasquez
e87110852d [SCSI] qla2xxx: Cleanse memory allocation logic during probe.
- Drop loop-till-allocated structure of code within
  qla2x00_mem_alloc().
- Properly unwind deallcations of memory during failures.
- Drop qla2x00_allocate_sp_pool() and qla2x00_free_sp_pool()
  functions as their implementations can easily be collapsed into
  the callers.
- Defer DMA pool allocation of SFP data until requested.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:39 -06:00
Andrew Vasquez
0afb467b47 [SCSI] qla2xxx: Clear EFT buffer before firmware reinitialization.
To insure that there is no stale data present during EFT
re-registration.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:39 -06:00
Andrew Vasquez
df4bf0bb5b [SCSI] qla2xxx: Cleanup any outstanding SRB resources during shutdown.
Refactor SRB-failure completion codes in the process.  Also,
signal the DPC routine to complete sooner as backend processing
at shutdown-time is superflous.

[jejb: resolve conflicts with pci_enable_device_bars removal]

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:38 -06:00
Andrew Vasquez
61623fc34f [SCSI] qla2xxx: Add MODULE_FIRMWARE hint for ISP25XX firmware.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:38 -06:00
Andrew Vasquez
948882f6b7 [SCSI] qla2xxx: Correct resource_size_t usages.
Hmm, it looks like the conversion to resource_size_t usage
(3776541d8a) requires some additional
fixups to cleanup the structure-pointer castings used during IO mapped
accesses to the chip.

There's only a small number of locations, where the driver uses IO
mapped accesses to the hardware, the patch below should take care of
it without introducing to many structural changes to code flow.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:38 -06:00
Mike Christie
4c85187931 [SCSI] iscsi: bump version to 2.0-868
Set iscsi version to 2.0-868

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:38 -06:00
Mike Christie
8b1d03434e [SCSI] libiscsi: fix session age rollover and remove cid encoding
The session age mask is only 4 bits, but session->age is 32. When
it gets larger then 15 and we try to or the bits some bits get
dropped and the check for session age in iscsi_verify_itt is useless.

The ISCSI_CID_MASK related bits are also useless since cid is always
one.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:37 -06:00
Mike Christie
322d739da8 [SCSI] iscsi: fix up iscsi printk prefix
Some iscsi class messages have the dev_printk prefix and some libiscsi
and iscsi_tcp messages have "iscsi" or the module name as a prefix which
is normally pretty useless when trying to figure out which session
or connection the message is attached to. This patch adds iscsi lib
and class dev_printks so all messages have a common prefix that
can be used to figure out which object printed it.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:37 -06:00
Mike Christie
c238c3bba9 [SCSI] iscsi class: fix iscsi conn attr counter
There are 13 iscsi conn attrs, but since the IF/OF markers were not being
used we did not notice that we forgot to increment the ISCSI_CONN_ATTRS
counter.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:37 -06:00
Mike Christie
ad294e9cd1 [SCSI] libiscsi: fix setting of nop timer
If we rollover then we could get a next_timeout of zero, so we need
to set the new timer to that value.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:37 -06:00
Mike Christie
921601b703 [SCSI] qla4xxx: add async scan support
qla4xxx has the old school startup/probe where it finds presetup sessions
in its flash and then attempts to log into them before returning from the
probe. This however, makes it very simple to add a iscsi class scan finished
helper which the driver can use.

In future patches Dave or I will rip apart the driver to make it more
like qla2xxx, but for now this is a very simple two line patch which
fixes the problem of trying to figure out when the initial sessions
are done being scanned.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: David Somayajulu <david.somayajulu@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:35 -06:00
Mike Christie
8aae18adb2 [SCSI] iscsi class: add async scan helper
In qla4xxx's probe it will call the iscsi session setup functions
for session that got setup on the initial start. This then makes
it easy for the iscsi class to export a helper which indicates
when those scans are done.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:35 -06:00
Mike Christie
568d303b5b [SCSI] qla4xxx: fix recovery timer and session unblock race
If qla4xxx is resetting up a session and the recovery timer
fires we do not want to just set it to dead, because
the dpc thread could have just set it to online and is in the
middle of resetting it up.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: David Somayajulu <david.somayajulu@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:35 -06:00
Mike Christie
bd976f62cd [SCSI] iscsi class: add session scanning
This just adds iscsi session scanning which works like fc rport scanning.
The future patches will hook the drivers into Mathew Wilcox's async
scanning infrastructure, so userspace does not have to special case
iscsi and so userspace does not have to make a extra special case for
hardware iscsi root scanning.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:35 -06:00
Mike Christie
7fb1921b07 [SCSI] qla4xxx: use iscsi class session state check ready
This has qla4xxx use the iscsi class's check ready function
in the queue command function, so all iscsi drivers return the
same error value for common problems.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: David Somayajulu <david.somayajulu@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:35 -06:00
Mike Christie
b635930de9 [SCSI] qla4xxx: directly call iscsi recovery functions
Qla4xxx can just call the iscsi recovery functions directly.
There is no need for userspace to do this for qla4xxx, because
we do not use the mutex to iterate over devices anymore and iscsi_block
/unblock_session can be called from interrupt context or the dpc thread.
And having userspace do this just creates uneeded headaches for qla4xxx root
situations where the session may experience problems. For example
during the kernel shutdown the scsi layer wants to send sync caches, but at
this time userspace is not up (iscsid is not running), so we cannot
recover from the problem.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: David Somayajulu <david.somayajulu@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:34 -06:00
Mike Christie
6eabafbe66 [SCSI] iscsi class, libiscsi: add iscsi sysfs session state file
This adds a iscsi session state file which exports the session
state for both software and hardware iscsi. It also hooks libiscsi
in.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:34 -06:00
Boaz Harrosh
84ac86ca8c [SCSI] arm: convert to accessors and !use_sg cleanup
- convert to accessors and !use_sg cleanup

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Tested-by: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:34 -06:00
James Bottomley
c9e86b8b1d [SCSI] mca_53c9x: remove driver
This driver depends on the deprecated NCR53C9X core and needs to be converted
to the esp_scsi core.

Acked-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:34 -06:00
Tony Battersby
3dfcb701e1 [SCSI] sym53c8xx: fix resid calculation
This patch fixes the calculation of the data transfer residual for the
case of a command that is supposed to transfer an odd number of bytes on
a wide bus but transfers nothing instead.

Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:34 -06:00
Aegis Lin
51883b5e60 [SCSI] ps3rom: sector size should be 512 bytes
It should be desired that 64 KiB is available for ATAPI transferrring.
(Historically) in SCSI/block layer sector size is defined as 512 during
sector-byte calculation.
Originally in ps3rom.c CD_FRAMESIZE (2048) was used, which limited
/sys/block/sr0/queue/max_sectors_kb to 16 KiB (32 sectors).

Signed-off-by: Aegis Lin <aegislin@gmail.com>
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:33 -06:00
Thomas Bogendoerfer
0bb67f1818 [SCSI] sun3x_esp: convert to esp_scsi
Converted sun3x_esp driver to use esp_scsi.c

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:33 -06:00
Adrian Bunk
f8d9d654fc [SCSI] libiscsi: make __iscsi_complete_pdu() static
__iscsi_complete_pdu() can now become static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:33 -06:00
Salyzyn, Mark
5234e25c35 [SCSI] aacraid: fib context lock for management ioctls (take 2)
The first patch (a119ee8ee3) was a bit
too aggressive and nested the locks (!) unit testing was in
error. This patch was reverted by
203a512f09.

This new patch should fix the locks correctly.

Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:33 -06:00
Daniel Walker
8f1bfa4c5c scsi: megaraid: trivial drop duplicate mutex.h include
Signed-off-by: Daniel Walker <dwalker@mvista.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 11:15:41 -08:00
Adrian Bunk
7b892806b0 cleanup after APUS removal
After the APUS removal, some code can be removed.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Karsten Keil <kkeil@suse.de>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 10:41:01 -08:00
Jeff Garzik
15aafa2f9d Remove pointless casts from void pointers
Mostly in and around irq handlers.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: "Luck Tony" <tony.luck@intel.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Cc: Karsten Keil <kkeil@suse.de>
Acked-by: "John W. Linville" <linville@tuxdriver.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 10:41:01 -08:00
Bartlomiej Zolnierkiewicz
c47137a99c ide: add ide_read_[alt]status() inline helpers
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-06 02:57:51 +01:00
FUJITA Tomonori
99c84dbdc7 iommu sg merging: call dma_set_seg_boundary in __scsi_alloc_queue()
This is a one-line patch to add the following to __scsi_alloc_queue():

dma_set_seg_boundary(dev, shost->dma_boundary);

This is the simplest approach but the result looks odd,
__scsi_alloc_queue() does:

blk_queue_segment_boundary(q, shost->dma_boundary);
dma_set_seg_boundary(dev, shost->dma_boundary);
blk_queue_max_segment_size(q, dma_get_max_seg_size(dev));

I think that it would be better to set up segment boundary in the same
way as we did for the maximum segment size. That is, removing
shost->dma_boundary and LLDs call pci_set_dma_seg_boundary (or its
friends).

Then __scsi_alloc_queue() can set up both limits in the same way:

blk_queue_segment_boundary(q, dma_get_seg_boundary(dev));
blk_queue_max_segment_size(q, dma_get_max_seg_size(dev));

killing dma_boundary in scsi_host_template needs a large patch for
libata (dma_boundary is used by only libata and sym53c8xx). I'll send
a patch to do that if it is acceptable. James and Jeff?

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Greg KH <greg@kroah.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:12 -08:00
FUJITA Tomonori
0c95fdc596 iommu sg merging: aacraid: use pci_set_dma_max_seg_size
This sets the segment size limit properly via pci_set_dma_max_seg_size
and remove blk_queue_max_segment_size because scsi-ml calls it.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:11 -08:00
FUJITA Tomonori
860ac568e8 iommu sg merging: call blk_queue_segment_boundary in __scsi_alloc_queue
request_queue and device struct must have the same value of a segment
size limit. This patch adds blk_queue_segment_boundary in
__scsi_alloc_queue so LLDs don't need to call both
blk_queue_segment_boundary and set_dma_max_seg_size. A LLD can change
the default value (64KB) can call device_dma_parameters accessors like
pci_set_dma_max_seg_size when allocating scsi_host.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Jeff Garzik <jeff@garzik.org>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:11 -08:00
Olof Johansson
ecb8a8472f pcmcia: convert some internal-only ioaddr_t to unsigned int
Convert the io_req_t members to unsigned int, to allow use on machines with
more than 16 bits worth of IO ports (i.e.  secondary busses on ppc64, etc).

There was only a couple of places in drivers where a change was needed.  I
left printk formats alone (there are lots of %04x-style formats in there),
mostly to not change the format on the platforms that only have 16-bit io
addresses, but also because the padding doesn't really add all that much value
most of the time.

I found only one sprintf of an address, and upsized the string accordingly (I
doubt anyone will have anywhere near INT_MAX as irq value, but at least
there's room for it now).

Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:08 -08:00
Linus Torvalds
f5bb3a5e9d Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (79 commits)
  Jesper Juhl is the new trivial patches maintainer
  Documentation: mention email-clients.txt in SubmittingPatches
  fs/binfmt_elf.c: spello fix
  do_invalidatepage() comment typo fix
  Documentation/filesystems/porting fixes
  typo fixes in net/core/net_namespace.c
  typo fix in net/rfkill/rfkill.c
  typo fixes in net/sctp/sm_statefuns.c
  lib/: Spelling fixes
  kernel/: Spelling fixes
  include/scsi/: Spelling fixes
  include/linux/: Spelling fixes
  include/asm-m68knommu/: Spelling fixes
  include/asm-frv/: Spelling fixes
  fs/: Spelling fixes
  drivers/watchdog/: Spelling fixes
  drivers/video/: Spelling fixes
  drivers/ssb/: Spelling fixes
  drivers/serial/: Spelling fixes
  drivers/scsi/: Spelling fixes
  ...
2008-02-04 07:58:52 -08:00
Linus Torvalds
519cb68807 Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild:
  scsi: fix dependency bug in aic7 Makefile
  kbuild: add svn revision information to setlocalversion
  kbuild: do not warn about __*init/__*exit symbols being exported
  Move Kconfig.instrumentation to arch/Kconfig and init/Kconfig
  Add HAVE_KPROBES
  Add HAVE_OPROFILE
  Create arch/Kconfig
  Fix ARM to play nicely with generic Instrumentation menu
  kconfig: ignore select of unknown symbol
  kconfig: mark config as changed when loading an alternate config
  kbuild: Spelling/grammar fixes for config DEBUG_SECTION_MISMATCH
  Remove __INIT_REFOK and __INITDATA_REFOK
  kbuild: print only total number of section mismatces found
2008-02-04 07:56:17 -08:00
Linus Torvalds
7cf7669143 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6:
  PCI: fix 4x section mismatch warnings
  PCI: fix section mismatch warnings referring to pci_do_scan_bus
  pci: pci_enable_device_bars() fix for lpfc driver
  Revert "PCI: PCIE ASPM support"
2008-02-04 07:42:16 -08:00
Sam Ravnborg
8891fec65a scsi: fix dependency bug in aic7 Makefile
Building the aic7xxx driver includes the copy
of an .h file from a _shipped file.

In a highly parallel build Ingo saw that the
build sometimes failed (included distcc usage).
It was tracked down to a missing dependency from the .c
source file to the generated .h file.
We started to build the .c file before the
copy (cat) operation of the .h file completed
and we then only got half of the definitions
from the copied .h file.

Add an explicit dependency from the .c files to the
generated .h files so make knows all dependencies and
finsih the build of the .h files before it starts
building the .o files.

Ingo tested this fix and reported:
good news: hundreds of successful kernel builds and no failures
overnight.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-03 21:55:49 +01:00
Joe Perches
b1c118121a drivers/scsi/: Spelling fixes
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Acked-by: James Smart <james.smart@emulex.com>
Acked-by: Darrick J. Wong <djwong@us.ibm.com>
Acked-by: David Somayajulu <david.somayajulu@qlogic.com>
Acked-by: Mark Salyzyn <mark_salyzyn@adaptec.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-02-03 17:28:22 +02:00
Joe Perches
726a645913 MAINTAINERS: remove Adam Fritzler, remove his email address in other sources
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-02-03 16:36:24 +02:00
Greg Kroah-Hartman
d5f78fb0c8 pci: pci_enable_device_bars() fix for lpfc driver
Based on a patch from Ingo Molnar <mingo@elte.hu> as he pointed out that
I wrongly missed this.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-02 12:04:28 -08:00
Bartlomiej Zolnierkiewicz
98d2a7aad1 ide-scsi: remove needless SELECT_DRIVE() call
SELECT_DRIVE() is called by IDE core code in start_request() before device
driver's ->do_request method.  In ide-scsi case ->do_request is implemented
by idescsi_do_request() which is also the only user of idescsi_issue_pc().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02 19:56:46 +01:00
Bartlomiej Zolnierkiewicz
2d6027f087 ide-scsi: use ide_execute_command()
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02 19:56:44 +01:00
Linus Torvalds
215e871aaa Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6: (64 commits)
  PCI: make pci_bus a struct device
  PCI: fix codingstyle issues in include/linux/pci.h
  PCI: fix codingstyle issues in drivers/pci/pci.h
  PCI: PCIE ASPM support
  PCI: Fix fakephp deadlock
  PCI: modify SB700 SATA MSI quirk
  PCI: Run ACPI _OSC method on root bridges only
  PCI ACPI: AER driver should only register PCIe devices with _OSC
  PCI ACPI: Added a function to register _OSC with only PCIe devices.
  PCI: constify function pointer tables
  PCI: Convert drivers/pci/proc.c to use unlocked_ioctl
  pciehp: block new requests from the device before power off
  pciehp: workaround against Bad DLLP during power off
  pciehp: wait for 1000ms before LED operation after power off
  PCI: Remove pci_enable_device_bars() from documentation
  PCI: Remove pci_enable_device_bars()
  PCI: Remove users of pci_enable_device_bars()
  PCI: Add pci_enable_device_{io,mem} intefaces
  PCI: avoid save the same type of cap multiple times
  PCI: correctly initialize a structure for pcie_save_pcix_state()
  ...
2008-02-02 14:29:33 +11:00
Benjamin Herrenschmidt
0948391641 PCI: Remove users of pci_enable_device_bars()
This patch converts users of pci_enable_device_bars() to the new
pci_enable_device_{io,mem} interface.

The new API fits nicely, except maybe for the QLA case where a bit of
code re-organization might be a good idea but I prefer sticking to the
simple patch as I don't have hardware to test on.

I'll also need some feedback on the cs5520 change.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:27 -08:00
Bartlomiej Zolnierkiewicz
59bca8cc99 ide: update/add my Copyrights
The last years stuff and a trip down memory lane...

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01 23:09:33 +01:00
Bartlomiej Zolnierkiewicz
58f189fccc ide: delete filenames/versions from comments
Delete filenames/versions from comments.

I'm leaving decisions about adding DRV_VERSION defines and MODULE_VERSION()-s
to maintainers of the respective drivers.

While at it:

* Remove unused VERSION define from ide.c.

* Remove unused/stale DRV_VERSION define from au1xxx-ide.c.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01 23:09:33 +01:00
James Bottomley
203a512f09 [SCSI] Revert "[SCSI] aacraid: fib context lock for management ioctls"
This reverts commit a119ee8ee3.

Adaptec found this was causing system lockups.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-30 13:14:26 -06:00
FUJITA Tomonori
3d9dd6eef8 [SCSI] handle scsi_init_queue failure properly
scsi_init_queue is expected to clean up allocated things when it
fails.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-30 13:14:25 -06:00
FUJITA Tomonori
b172b6e99e [SCSI] destroy scsi_bidi_sdb_cache in scsi_exit_queue
Needs to call kmem_cache_destroy for scsi_bidi_sdb_cache in
scsi_exit_queue.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-30 13:14:25 -06:00
FUJITA Tomonori
c639d14e2f [SCSI] scsi_debug: add XDWRITEREAD_10 support
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Douglas Gilbert <dougg@torque.net>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-30 13:14:25 -06:00
FUJITA Tomonori
072d0bb3ce [SCSI] scsi_debug: add bidi data transfer support
This enables fill_from_dev_buffer and fetch_to_dev_buffer to handle
bidi commands.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Douglas Gilbert <dougg@torque.net>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-30 13:14:24 -06:00
FUJITA Tomonori
3de9f94479 [SCSI] scsi_debug: add get_data_transfer_info helper function
This adds get_data_transfer_info helper function that get lha and
sectors for READ_* and WRITE_* commands (and XDWRITEREAD_10 later).

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Douglas Gilbert <dougg@torque.net>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-30 13:14:24 -06:00
James Bottomley
d3f46f39b7 [SCSI] remove use_sg_chaining
With the sg table code, every SCSI driver is now either chain capable
or broken (or has sg_tablesize set so chaining is never activated), so
there's no need to have a check in the host template.

Also tidy up the code by moving the scatterlist size defines into the
SCSI includes and permit the last entry of the scatterlist pools not
to be a power of two.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-30 13:14:02 -06:00
Kiyoshi Ueda
b8de163184 [SCSI] bidirectional: fix up for the new blk_end_request code
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-30 13:03:41 -06:00
Boaz Harrosh
6f9a35e2da [SCSI] bidirectional command support
At the block level bidi request uses req->next_rq pointer for a second
bidi_read request.
At Scsi-midlayer a second scsi_data_buffer structure is used for the
bidi_read part. This bidi scsi_data_buffer is put on
request->next_rq->special. Struct scsi_cmnd is not changed.

- Define scsi_bidi_cmnd() to return true if it is a bidi request and a
  second sgtable was allocated.

- Define scsi_in()/scsi_out() to return the in or out scsi_data_buffer
  from this command This API is to isolate users from the mechanics of
  bidi.

- Define scsi_end_bidi_request() to do what scsi_end_request() does but
  for a bidi request. This is necessary because bidi commands are a bit
  tricky here. (See comments in body)

- scsi_release_buffers() will also release the bidi_read scsi_data_buffer

- scsi_io_completion() on bidi commands will now call
  scsi_end_bidi_request() and return.

- The previous work done in scsi_init_io() is now done in a new
  scsi_init_sgtable() (which is 99% identical to old scsi_init_io())
  The new scsi_init_io() will call the above twice if needed also for
  the bidi_read command. Only at this point is a command bidi.

- In scsi_error.c at scsi_eh_prep/restore_cmnd() make sure bidi-lld is not
  confused by a get-sense command that looks like bidi. This is done
  by puting NULL at request->next_rq, and restoring.

[jejb: update to sg_table and resolve conflicts
also update to blk-end-request and resolve conflicts]

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-30 13:03:41 -06:00
Boaz Harrosh
30b0c37b27 [SCSI] implement scsi_data_buffer
In preparation for bidi we abstract all IO members of scsi_cmnd,
that will need to duplicate, into a substructure.

- Group all IO members of scsi_cmnd into a scsi_data_buffer
  structure.
- Adjust accessors to new members.
- scsi_{alloc,free}_sgtable receive a scsi_data_buffer instead of
  scsi_cmnd. And work on it.
- Adjust scsi_init_io() and  scsi_release_buffers() for above
  change.
- Fix other parts of scsi_lib/scsi.c to members migration. Use
  accessors where appropriate.

- fix Documentation about scsi_cmnd in scsi_host.h

- scsi_error.c
  * Changed needed members of struct scsi_eh_save.
  * Careful considerations in scsi_eh_prep/restore_cmnd.

- sd.c and sr.c
  * sd and sr would adjust IO size to align on device's block
    size so code needs to change once we move to scsi_data_buff
    implementation.
  * Convert code to use scsi_for_each_sg
  * Use data accessors where appropriate.

- tgt: convert libsrp to use scsi_data_buffer

- isd200: This driver still bangs on scsi_cmnd IO members,
  so need changing

[jejb: rebased on top of sg_table patches fixed up conflicts
and used the synergy to eliminate use_sg and sg_count]

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-30 13:03:40 -06:00
Boaz Harrosh
bb52d82f45 [SCSI] tgt: use scsi_init_io instead of scsi_alloc_sgtable
If we export scsi_init_io()/scsi_release_buffers() instead of
scsi_{alloc,free}_sgtable() from scsi_lib than tgt code is much more
insulated from scsi_lib changes. As a bonus it will also gain bidi
capability when it comes.

[jejb: rebase on to sg_table and fix up rejections]

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-30 13:03:40 -06:00
FUJITA Tomonori
03e7925d07 [SCSI] aic7xxx: fix warnings with CONFIG_PM disabled
CC [M]  drivers/scsi/aic7xxx/aic7xxx_osm_pci.o
drivers/scsi/aic7xxx/aic7xxx_osm_pci.c:148: warning: 'ahc_linux_pci_dev_suspend' defined but not used
drivers/scsi/aic7xxx/aic7xxx_osm_pci.c:166: warning: 'ahc_linux_pci_dev_resume' defined but not used

This moves aic7xxx_pci_driver struct, removes some forward declarations,
and adds some ifdef CONFIG_PM.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-30 13:03:40 -06:00
FUJITA Tomonori
67eb63364e [SCSI] aic79xx: fix warnings with CONFIG_PM disabled
CC [M]  drivers/scsi/aic7xxx/aic79xx_osm_pci.o
drivers/scsi/aic7xxx/aic79xx_osm_pci.c:101: warning: 'ahd_linux_pci_dev_suspend' defined but not used
drivers/scsi/aic7xxx/aic79xx_osm_pci.c:121: warning: 'ahd_linux_pci_dev_resume' defined but not used

This moves aic79xx_pci_driver struct, removes some forward
declarations, and adds some ifdef CONFIG_PM.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-30 13:03:40 -06:00
David Milburn
969ceffb66 [SCSI] aic7xxx: fix ahc_done check SCB_ACTIVE for tagged transactions
The driver only needs to check the SCB_ACTIVE flag if the SCB is not
in the untagged queue.

If the driver is in error recovery, you may end panic'ing on a TUR
that is in the untagged queue.

Attempting to queue an ABORT message
CDB: 0x0 0x0 0x0 0x0 0x0 0x0
SCB 3 done'd twice

This patch is included in Adaptec's 6.3.11 driver on their website.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-30 13:03:39 -06:00
Thomas Bogendoerfer
2adbfa333a [SCSI] sgiwd93: use cached memory access to make driver work on IP28
SGI IP28 machines would need special treatment (enable adding addtional
wait states) when accessing memory uncached. To avoid this pain I
changed the driver to use only cached access to memory.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-30 13:03:39 -06:00
FUJITA Tomonori
149d6bafc4 [SCSI] ncr53c8xx: fix sense_buffer access bug
The commit de25deb180 changed
scsi_cmnd.sense_buffer from a static array to a dynamically allocated
buffer. We can't access to sense_buffer in '&cmd->sense_buffer' way.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-30 13:03:39 -06:00
FUJITA Tomonori
c1c9ce52c8 [SCSI] aic79xx: fix sense_buffer access bug
The commit de25deb180 changed
scsi_cmnd.sense_buffer from a static array to a dynamically allocated
buffer. We can't access to sense_buffer in '&cmd->sense_buffer' way.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-30 13:03:39 -06:00
FUJITA Tomonori
c372f4a82f [SCSI] hptiop: fix sense_buffer access bug
&cmnd->sense_buffer now zeroes the wrong thing.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-30 13:03:38 -06:00
Nathan Lynch
de15c2017c [SCSI] sym53c8xx: fix bad memset argument in sym_set_cam_result_error
On a big powerpc box I got the following oops with 2.6.24-git2:

sym0: <1010-66> rev 0x1 at pci 0000:d0:01.0 irq 215
sym0: No NVRAM, ID 7, Fast-80, LVD, parity checking
sym0: SCSI BUS has been reset.
scsi0 : sym-2.2.3
 target0:0:8: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31)
scsi 0:0:8:0: Direct-Access     IBM      ST318305LC       C509 PQ: 0
ANSI: 3
 target0:0:8: tagged command queuing enabled, command queue depth 16.
 target0:0:8: Beginning Domain Validation
 target0:0:8: asynchronous
 target0:0:8: wide asynchronous
 target0:0:8: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
 target0:0:8: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
Unable to handle kernel paging request for data at address 0x00000000
Faulting instruction address: 0xc000000000038460
cpu 0x25: Vector: 300 (Data Access) at [c00000000f567840]
    pc: c000000000038460: .memcpy+0x60/0x280
    lr: d000000000050280: .sym_set_cam_result_error+0xfc/0x1e0 [sym53c8xx]
    sp: c00000000f567ac0
   msr: 8000000000009032
   dar: 0
 dsisr: 42000000
  current = 0xc000006d1e0af0a0
  paca    = 0xc0000000004afc00
    pid   = 0, comm = swapper
enter ? for help
[link register   ] d000000000050280
.sym_set_cam_result_error+0xfc/0x1e0 [sym53c8xx]
[c00000000f567ac0] c00000000f567b80 (unreliable)
[c00000000f567b80] d0000000000552b8 .sym_complete_error+0x12c/0x1bc [sym53c8xx]
[c00000000f567c20] d0000000000561a4 .sym_int_sir+0xaa4/0x1718 [sym53c8xx]
[c00000000f567d00] d000000000057e8c .sym_interrupt+0x4e4/0x6ec [sym53c8xx]
[c00000000f567dc0] d00000000004fdf4 .sym53c8xx_intr+0x6c/0xdc [sym53c8xx]
[c00000000f567e50] c0000000000a83e0 .handle_IRQ_event+0x7c/0xec
[c00000000f567ef0] c0000000000aa344 .handle_fasteoi_irq+0x130/0x1f0
[c00000000f567f90] c00000000002a538 .call_handle_irq+0x1c/0x2c
[c000004d5e0b3a90] c00000000000c320 .do_IRQ+0x108/0x1d0
[c000004d5e0b3b20] c000000000004790 hardware_interrupt_entry+0x18/0x1c

The memset() in sym_set_cam_result_error() would appear to be trashing
the scsi_cmnd struct instead of clearing sense_buffer.

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-30 13:03:38 -06:00
Denis V. Lunev
b7c6ba6eb1 [NETNS]: Consolidate kernel netlink socket destruction.
Create a specific helper for netlink kernel socket disposal. This just
let the code look better and provides a ground for proper disposal
inside a namespace.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Tested-by: Alexey Dobriyan <adobriyan@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:08:07 -08:00
Michael Chan
7ffc49a6ee [ETH]: Combine format_addr() with print_mac().
print_mac() used many most net drivers and format_addr() used by
net-sysfs.c are very similar and they can be intergrated.

format_addr() is also identically redefined in the qla4xxx iscsi
driver.

Export a new function sysfs_format_mac() to be used by net-sysfs,
qla4xxx and others in the future.  Both print_mac() and
sysfs_format_mac() call _format_mac_addr() to do the formatting.

Changed print_mac() to use unsigned char * to be consistent with
net_device struct's dev_addr.  Added buffer length overrun checking
as suggested by Joe Perches.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:00:05 -08:00
Linus Torvalds
8d01eddf29 Merge branch 'for-2.6.25' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.25' of git://git.kernel.dk/linux-2.6-block:
  block: implement drain buffers
  __bio_clone: don't calculate hw/phys segment counts
  block: allow queue dma_alignment of zero
  blktrace: Add blktrace ioctls to SCSI generic devices
2008-01-29 08:51:56 +11:00
Linus Torvalds
f0f0052069 Merge branch 'blk-end-request' of git://git.kernel.dk/linux-2.6-block
* 'blk-end-request' of git://git.kernel.dk/linux-2.6-block: (30 commits)
  blk_end_request: changing xsysace (take 4)
  blk_end_request: changing ub (take 4)
  blk_end_request: cleanup of request completion (take 4)
  blk_end_request: cleanup 'uptodate' related code (take 4)
  blk_end_request: remove/unexport end_that_request_* (take 4)
  blk_end_request: changing scsi (take 4)
  blk_end_request: add bidi completion interface (take 4)
  blk_end_request: changing ide-cd (take 4)
  blk_end_request: add callback feature (take 4)
  blk_end_request: changing ide normal caller (take 4)
  blk_end_request: changing cpqarray (take 4)
  blk_end_request: changing cciss (take 4)
  blk_end_request: changing ide-scsi (take 4)
  blk_end_request: changing s390 (take 4)
  blk_end_request: changing mmc (take 4)
  blk_end_request: changing i2o_block (take 4)
  blk_end_request: changing viocd (take 4)
  blk_end_request: changing xen-blkfront (take 4)
  blk_end_request: changing viodasd (take 4)
  blk_end_request: changing sx8 (take 4)
  ...
2008-01-29 08:51:32 +11:00
James Bottomley
7cedb1f17f SG: work with the SCSI fixed maximum allocations.
SCSI sg table allocation has a maximum size (of SCSI_MAX_SG_SEGMENTS,
currently 128) and this will cause a BUG_ON() in SCSI if something
tries an allocation over it.  This patch adds a size limit to the
chaining allocator to allow the specification of the maximum
allocation size for chaining, so we always chain in units of the
maximum SCSI allocation size.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-28 10:54:49 +01:00
Kiyoshi Ueda
610d8b0c97 blk_end_request: changing scsi (take 4)
This patch converts scsi mid-layer to use blk_end_request interfaces.
Related 'uptodate' arguments are converted to 'error'.

As a result, the interface of internal function, scsi_end_request(),
is changed.

Cc: James Bottomley <James.Bottomley@SteelEye.com>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-28 10:37:09 +01:00
Kiyoshi Ueda
5a330e39b1 blk_end_request: changing ide-scsi (take 4)
This patch converts ide-scsi to use blk_end_request interfaces.
Related 'uptodate' arguments are converted to 'error'.

Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-28 10:36:56 +01:00
Jens Axboe
5ed7959ede SG: Convert SCSI to use scatterlist helpers for sg chaining
Also change scsi_alloc_sgtable() to just return 0/failure, since it
maps to the command passed in. ->request_buffer is now no longer needed,
once drivers are adapted to use scsi_sglist() it can be killed.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-28 10:05:27 +01:00
Christof Schmitt
6da127ad09 blktrace: Add blktrace ioctls to SCSI generic devices
Since the SCSI layer uses the request queues from the block layer, blktrace can
also be used to trace the requests to all SCSI devices (like SCSI tape drives),
not only disks. The only missing part is the ioctl interface to start and stop
tracing.

This patch adds the SETUP, START, STOP and TEARDOWN ioctls from blktrace to the
sg device files. With this change, blktrace can be used for SCSI devices like
for disks, e.g.: blktrace -d /dev/sg1 -o - | blkparse -i -

Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-28 10:04:46 +01:00
Linus Torvalds
9b73e76f3c Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (200 commits)
  [SCSI] usbstorage: use last_sector_bug flag universally
  [SCSI] libsas: abstract STP task status into a function
  [SCSI] ultrastor: clean up inline asm warnings
  [SCSI] aic7xxx: fix firmware build
  [SCSI] aacraid: fib context lock for management ioctls
  [SCSI] ch: remove forward declarations
  [SCSI] ch: fix device minor number management bug
  [SCSI] ch: handle class_device_create failure properly
  [SCSI] NCR5380: fix section mismatch
  [SCSI] sg: fix /proc/scsi/sg/devices when no SCSI devices
  [SCSI] IB/iSER: add logical unit reset support
  [SCSI] don't use __GFP_DMA for sense buffers if not required
  [SCSI] use dynamically allocated sense buffer
  [SCSI] scsi.h: add macro for enclosure bit of inquiry data
  [SCSI] sd: add fix for devices with last sector access problems
  [SCSI] fix pcmcia compile problem
  [SCSI] aacraid: add Voodoo Lite class of cards.
  [SCSI] aacraid: add new driver features flags
  [SCSI] qla2xxx: Update version number to 8.02.00-k7.
  [SCSI] qla2xxx: Issue correct MBC_INITIALIZE_FIRMWARE command.
  ...
2008-01-25 17:19:08 -08:00
Linus Torvalds
2ba14a017a Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (67 commits)
  fix drivers/ata/sata_fsl.c double-decl
  [libata] Prefer SCSI_SENSE_BUFFERSIZE to sizeof()
  pata_legacy: Merge winbond support
  ata_generic: Cenatek support
  pata_winbond: error return
  pata_serverworks: Fix cable types and cosmetics
  pata_mpc52xx: remove un-needed assignment
  libata: fix off-by-one in error categorization
  ahci: factor out AHCI enabling and enable AHCI before reading CAP
  ata_piix: implement SIDPR SCR access
  ata_piix: convert to prepare - activate initialization
  libata: factor out ata_pci_activate_sff_host() from ata_pci_one()
  [libata] Prefer SCSI_SENSE_BUFFERSIZE to sizeof()
  pata_legacy: resychronize with upstream changes and resubmit
  [libata] pata_legacy: typo fix
  [libata] pata_winbond: update for new ->data_xfer hook
  pata_pcmcia: convert to new data_xfer prototype
  libata annotations and fixes
  libata: use dev_driver_string() instead of "libata" in libata-sff.c
  ata_piix: kill unused constants and flags
  ...
2008-01-25 17:08:28 -08:00
Bartlomiej Zolnierkiewicz
2fc5738819 ide: add ide_pktcmd_tf_load() helper
Add ide_pktcmd_tf_load() helper and convert ATAPI device drivers to use it.

There should be no functionality changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25 22:17:13 +01:00
Bartlomiej Zolnierkiewicz
932aead6d2 ide-{floppy,tape,scsi}: fix register loading order when issuing packet command
Load IDE_BCOUNTL_REG before IDE_BCOUNTH_REG when issuing packet command.

It shouldn't affect anything (just a usual paranoia to separate changes
which change the way in which hardware is accessed from code cleanups).

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25 22:17:13 +01:00
Bartlomiej Zolnierkiewicz
8e7657ae0f ide: remove atapi_ireason_t (take 3)
Remove atapi_ireason_t.

While at it:
* replace 'HWIF(drive)' by 'drive->hwif' (or just 'hwif' where possible)

v2:
* v1 had CD and IO bits reversed in many places.

* Use CD and IO defines from <linux/hdreg.h>.

v3:
* Fix incorrect "(ireason & IO) == test_bit()". (Noticed by Sergei)

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25 22:17:12 +01:00
Bartlomiej Zolnierkiewicz
790d123989 ide: remove ata_nsector_t, ata_data_t and atapi_bcount_t
Remove ata_nsector_t, ata_data_t (unused) and atapi_bcount_t.

While at it:
* replace 'HWIF(drive)' by 'hwif'

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25 22:17:12 +01:00
Bartlomiej Zolnierkiewicz
e5f9f5a89a ide: remove atapi_feature_t
Remove atapi_feature_t.

While at it:
* replace 'HWIF(drive)' by 'hwif'

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25 22:17:12 +01:00
Bartlomiej Zolnierkiewicz
22c525b976 ide: remove ata_status_t and atapi_status_t
Remove ata_status_t (unused) and atapi_status_t.

While at it:
* replace 'HWIF(drive)' by 'drive->hwif' (or just 'hwif' where possible)

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25 22:17:11 +01:00
James Bottomley
366ca51f30 [SCSI] libsas: abstract STP task status into a function
Break out the frame processor for STP tasks from aic94xx so they can
be shared by other SAS HBA's

Original patch from Jeff Garzik <jeff@garzik.org>

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-25 11:47:23 -06:00
Frederik Deweerdt
1292500b15 [SCSI] ultrastor: clean up inline asm warnings
To: linux-kernel@vger.kernel.org
Cc: bunk@kernel.org
Subject: [trivial patch] scsi/ultrastor: clean up inline asm warnings

Hi,

Compiling latest mainline with gcc 4.2.1 spews the following warnings:

drivers/scsi/ultrastor.c: In function 'find_and_clear_bit_16':
drivers/scsi/ultrastor.c:303: warning: matching constraint does not allow a register
drivers/scsi/ultrastor.c:302: warning: matching constraint does not allow a register
drivers/scsi/ultrastor.c: At top level:
drivers/scsi/ultrastor.c:1202: warning: matching constraint does not allow a register
drivers/scsi/ultrastor.c:1202: warning: matching constraint does not allow a register
drivers/scsi/ultrastor.c: In function 'ultrastor_queuecommand':
drivers/scsi/ultrastor.c:698: warning: matching constraint does not allow a register
drivers/scsi/ultrastor.c:698: warning: matching constraint does not allow a register
drivers/scsi/ultrastor.c:698: warning: matching constraint does not allow a register
drivers/scsi/ultrastor.c:698: warning: matching constraint does not allow a register
drivers/scsi/ultrastor.c:698: warning: matching constraint does not allow a register
drivers/scsi/ultrastor.c:698: warning: matching constraint does not allow a register
drivers/scsi/ultrastor.c:698: warning: matching constraint does not allow a register
drivers/scsi/ultrastor.c:302: warning: matching constraint does not allow a register
drivers/scsi/ultrastor.c:302: warning: matching constraint does not allow a register

The following patch fixes it by using the '+' operator on the (*field)
operand, marking it as read-write to gcc. I diffed the two resulting .s,
and gcc produced the same code. This was tested with gcc 4.2.1 and gcc 3.4.3

Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com>
Cc: Adrian Bunk <trivial@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-25 11:09:10 -06:00
Vegard Nossum
93a38fa2dd [SCSI] aic7xxx: fix firmware build
This patch adds the proper $(obj) and $(src) prefixes to dependency
rules in aic7xxx makefile. Without this patch, there is a remote
possibility that parallel make with a different output directory can
fail.

Also changed the deprecated EXTRA_CFLAGS construct to ccflags-y syntax.

Fixed up patch to survive "make drivers/scsi/ -j"
with BUILD_FIRMWARE enable. /Sam

Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-25 09:26:33 -06:00
Salyzyn, Mark
a119ee8ee3 [SCSI] aacraid: fib context lock for management ioctls
Alan noticed the lack of locking surrounding the driver's dealings
with the fib context managed by the trio of ioctls that are used by
the RAID management applications to retrieve Adapter Initiated FIBs. I
merely expanded the fib lock to include the fib context. There have
been no field reports of any issues generally because the applications
are relatively static and do not come and go often enough to stress
this area. I bloated this patch a little with some space junk.

Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-25 09:25:22 -06:00
FUJITA Tomonori
5aa22af3d0 [SCSI] ch: remove forward declarations
This moves ch_template and changer_fops structs to the end of file and
removes forward declarations.

This also removes some trailing whitespace.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-25 09:22:12 -06:00
FUJITA Tomonori
da707c54c3 [SCSI] ch: fix device minor number management bug
ch_probe uses the total number of ch devices as minor.

ch_probe:
	ch->minor = ch_devcount;
...
	ch_devcount++;

Then ch_remove decreases ch_devcount:

ch_remove:
	ch_devcount--;

If you have two ch devices, sch0 and sch1, and remove sch0,
ch_devcount is 1. Then if you add another ch device, ch_probe tries to
create sch1. So you get a warning and fail to create sch1:

Jan 24 16:01:05 nice kernel: sysfs: duplicate filename 'sch1' can not be created
Jan 24 16:01:05 nice kernel: WARNING: at fs/sysfs/dir.c:424 sysfs_add_one()
Jan 24 16:01:05 nice kernel: Pid: 2571, comm: iscsid Not tainted 2.6.24-rc7-ga3d2c2e8-dirty #1
Jan 24 16:01:05 nice kernel:
Jan 24 16:01:05 nice kernel: Call Trace:
Jan 24 16:01:05 nice kernel:  [<ffffffff802a22b8>] sysfs_add_one+0x54/0xbd
Jan 24 16:01:05 nice kernel:  [<ffffffff802a283c>] create_dir+0x4f/0x87
Jan 24 16:01:05 nice kernel:  [<ffffffff802a28a9>] sysfs_create_dir+0x35/0x4a
Jan 24 16:01:05 nice kernel:  [<ffffffff803069a1>] kobject_get+0x12/0x17
Jan 24 16:01:05 nice kernel:  [<ffffffff80306ece>] kobject_add+0xf3/0x1a6
Jan 24 16:01:05 nice kernel:  [<ffffffff8034252b>] class_device_add+0xaa/0x39d
Jan 24 16:01:05 nice kernel:  [<ffffffff803428fb>] class_device_create+0xcb/0xfa
Jan 24 16:01:05 nice kernel:  [<ffffffff80229e09>] printk+0x4e/0x56
Jan 24 16:01:05 nice kernel:  [<ffffffff802a2054>] sysfs_ilookup_test+0x0/0xf
Jan 24 16:01:05 nice kernel:  [<ffffffff88022580>] :ch:ch_probe+0xbe/0x61a

(snip)

This patch converts ch to use a standard minor number management way,
idr like sg and bsg.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-25 09:21:55 -06:00
Dave Young
9c7701088a scsi: use class iteration api
Convert to use the class iteration api.

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:45 -08:00
Kay Sievers
af5ca3f4ec Driver core: change sysdev classes to use dynamic kobject names
All kobjects require a dynamically allocated name now. We no longer
need to keep track if the name is statically assigned, we can just
unconditionally free() all kobject names on cleanup.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:40 -08:00
Stuart Swales
e2d435ea40 [SCSI] initio: fix module hangs on loading
I've verified (on my Initio 9100 with a DAT drive) that the
2.6.24-rc8-git6 initio module still hangs on loading.

These fixes (other than the printk) are needed to get the module to load
ok (and work correctly) with my adapter & tape drive.

a) printk cosmetic fix

b) cblk->sglen needs setting for later DMA I/O routines to use

c) host->bios_addr needs setting for debug output correctness

d) semaph & semaph_lock initialisation had got lost since 2.6.22

e) since 2.6.22 the bios data address was truncated to 16 bits (needs 20
when shifted left)

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23 17:07:33 -06:00
FUJITA Tomonori
a3d2c2e8f5 [SCSI] ch: handle class_device_create failure properly
When class_device_create fails, ch_probe needs to fail too.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23 13:44:47 -06:00
Randy Dunlap
a43cf0f351 [SCSI] NCR5380: fix section mismatch
Many release() methods that are not __exit or __devexit call this
__devexit function, so remove its "__devexit" attribute.

scsi/g_NCR5380.c:
WARNING: vmlinux.o(.text+0xadaf8c): Section mismatch: reference to .exit.text:NCR5380_exit (between 'generic_NCR5380_release_resources' and 'generic_NCR5380_biosparam')
WARNING: vmlinux.o(.text+0xadd18c): Section mismatch: reference to .exit.text:NCR5380_exit (between 'generic_NCR5380_release_resources' and 'generic_NCR5380_biosparam')
scsi/pas16.c, seagate.c:
WARNING: vmlinux.o(.text+0xb29e91): Section mismatch: reference to .exit.text:NCR5380_exit (between 'pas16_release' and 'seagate_st0x_info')
t128.c:
WARNING: vmlinux.o(.text+0xb2a774): Section mismatch: reference to .exit.text:NCR5380_exit (between 't128_release' and 't128_biosparam')
dtc.c, sym2/sym_fw.c:
WARNING: vmlinux.o(.text+0xb2f215): Section mismatch: reference to .exit.text:NCR5380_exit (between 'dtc_release' and 'sym_fw1_patch')

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23 13:44:31 -06:00
Tony Battersby
53474c042c [SCSI] sg: fix /proc/scsi/sg/devices when no SCSI devices
The patch "[SCSI] sg: use idr to replace static arrays" in 2.6.24-rc1
causes a bogus line to appear in /proc/scsi/sg/devices containing
"-1 -1 -1 -1 -1 -1 -1 -1 -1" when there are no SCSI devices in the
system.  In 2.6.23, /proc/scsi/sg/devices is empty when there are no
SCSI devices in the system.  A similar problem exists with
/proc/scsi/sg/device_strs.  The following patch restores the behavior
of 2.6.23.

Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Acked-by: Douglas Gilbert <dougg@torque.net>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23 13:40:55 -06:00
James Bottomley
5b7f16804a [SCSI] don't use __GFP_DMA for sense buffers if not required
Only hosts which actually have ISA DMA requirements need sense buffers
coming out of ZONE_DMA, so only use the __GFP_DMA flag for that case
to avoid allocating this scarce resource if it's not necessary.

[tomo: fixed slab leak in failure case]
Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23 11:37:44 -06:00
FUJITA Tomonori
de25deb180 [SCSI] use dynamically allocated sense buffer
This removes static array sense_buffer in scsi_cmnd and uses
dynamically allocated sense_buffer (with GFP_DMA).

The reason for doing this is that some architectures need cacheline
aligned buffer for DMA:

http://lkml.org/lkml/2007/11/19/2

The problems are that scsi_eh_prep_cmnd puts scsi_cmnd::sense_buffer
to sglist and some LLDs directly DMA to scsi_cmnd::sense_buffer. It's
necessary to DMA to scsi_cmnd::sense_buffer safely. This patch solves
these issues.

__scsi_get_command allocates sense_buffer via kmem_cache_alloc and
attaches it to a scsi_cmnd so everything just work as before.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23 11:37:37 -06:00
Hans de Goede
a0899d4df5 [SCSI] sd: add fix for devices with last sector access problems
This patch adds a new scsi_device flag (last_sector_bug) for devices
which contain a bug where the device crashes when the last sector is
read in a larger then 1 sector read.

This is for example the case with sdcards in the HP PSC1350 printer
cardreader and in the HP PSC1610 printer cardreader.

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23 11:29:34 -06:00
James Bottomley
b523381e32 [SCSI] fix pcmcia compile problem
This patch

commit 8ae732a91d
Author: Tejun Heo <htejun@gmail.com>
Date:   Fri Dec 7 22:36:23 2007 +0900

    [SCSI] make pcmcia directory use obj-y|m instead of subdir-y|m

Moved the scsi Makefile into conformance, but also caused the pcmcia
subdirectory to get built in for the first time, leading to duplicate
symbols in an allyesconfig build.  Since evidently no-one relies on
these being built in, fix this by ensuring they can only be built as
modules.

Acked-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23 11:29:34 -06:00
Salyzyn, Mark
cb1042f285 [SCSI] aacraid: add Voodoo Lite class of cards.
The cards being added are supported in a limited sense already through
family matching, but we needed to add some functionality to the driver
to expose selectively the physical drives. These Physical drives are
specifically marked to not be part of any array and thus are declared
JBODs (Just a Bunch Of Drives) for generic SCSI access.

We report that this is the second patch in a set of two, but merely
depends on the stand-alone functionality of the first patch which adds
in that case the ability to report a driver feature flag via sysfs. We
leverage that functionality by reporting that this driver now supports
this new JBOD feature for the controller so that the array management
applications may react accordingly and guide the user as they manage
the controller.

Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23 11:29:34 -06:00
Salyzyn, Mark
2ca39c48ea [SCSI] aacraid: add new driver features flags
Feature enhancement, adding a 'flags' entry that will reside in the
host controller's tree, with a newline separated list of arbitrary
ascii named features that indicate whether the combination of driver
and controller has support for said feature. Breaking from the
one-line output typical of sysfs entries, newline was added to tailor
for grep, or simple gets line by line string match within an
application. I added one for a compiler time check for existence of
debug print output, one for an optional manifest defined enhanced
status reporting in the logs, and one for runtime reporting whether
the controller and driver supports arrays larger than 2TB. Adaptec's
storage management software uses the last flag to determine whether to
make available the creation of arrays larger than 2TB, otherwise a
warning is posted.

Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23 11:29:34 -06:00
Andrew Vasquez
0c27f5bd00 [SCSI] qla2xxx: Update version number to 8.02.00-k7.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23 11:29:33 -06:00
Seokmann Ju
c48339decc [SCSI] qla2xxx: Issue correct MBC_INITIALIZE_FIRMWARE command.
There is a case where 54xx HBA loads MID firmware as it use 24xx
firmware. In this case, the driver should issue
MBC_MID_INITIALIZE FIRMWARE even though the HBA doesn't support
NPIV.  This patch make changes in the driver so that could behave
accordingly.

Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23 11:29:33 -06:00