In DBS mode 2x2 VHT40 2G and 1x1 VHT 40 5G, the MAC 1 (5G)
doesn't support VHT80. Update the ch_width to max of 40Mhz
in beacon OMN ie when switch to DBS2.
Change-Id: If5cf65bca815d1e8df67a1515b2fb3edcba52a8e
CRs-Fixed: 2520719
Support wlan ipa clk voting for kona. Host should provide
bandiwdth levels to IPA driver for which IPA uc monitors
the levels. Once the threshold is reached IPA uc interrupts
the IPA driver and IPA driver informs host driver via callback
registered.
Change-Id: I9fd805d69858a413f20b9e55a9c02a82054c646b
CRs-Fixed: 2526300
Move to the common psoc object and retrieve the cfg ini
information from the legacy implementation.
Change-Id: I38147c748796550f2adede44b681559a4f329fbf
CRs-Fixed: 2547536
Due to channel number ambiguity with introduction of 6GHZ support
update NAN component APIs and data structures to use frequency
values instead of channel number.
Change-Id: I982fe8da0320c878f9473a62c86b80b220e2892e
CRs-fixed: 2551927
At the time of starting / stopping 2nd or 3rd connection,
Host sends WMI_PDEV_SET_HW_CMDID command to FW to change
HW mode to DBS / Single-Mac based on concurrency rule.
FW upon receiving this command turns off TXRX chainmask
which means that radar pulses might get missed for
20ms - 50ms during CAC period. To fix this, Host should
block new connection when existing SAP is performing CAC
on DFS channel.
Change-Id: I51eb117afa763a6ef54211808875419026c9075b
CRs-Fixed: 2533717
In the current implementation, NAN enable and disable request are
processed asynchronously, because of which some race conditions
are seen.
Example: If NDI is having multiple NDPs and without terminating
NDPs if NAN disable and NDI delete are issued back to back then,
NDP_END sequence is not initiated and causing deviation from
NAN spec. Root-cause is firmware deleting NDP peer as a part of
NDI delete before initiating NDP end sequence.
To fix this, process NAN enable and disable requests synchronously.
Change-Id: I467419370187b0dc8d879e1806347c9f21ebb23a
CRs-Fixed: 2528599
Fill the pfm info of the TDLS peer before sending the peer assoc
command to FW.
Change-Id: I4e336c345c0fb8f063157b3e3a780efa777f1a74
CRs-Fixed: 2535832
Disable 3 port in DBS 1x1 and No-DBS PCL tables
as DBS 1x1+1x1 or NON DBS solutions does not
support 3 port as of now.
Change-Id: I16d9d0b6f09ad599e94c776821e68f1e0fcc362e
CRs-Fixed: 2551510
When doing IPA initialization, WLAN driver registers a
notification callback for IPA uC ready. In the callback,
we directly set uc_loaded to true before scheduling a work
task to connect WLAN IPA pipes. However issue is that in
the work handler, uc_loaded is checked and if it is true,
we return without connecting WLAN IPA pipes.
Therefore properly set uc_loaded to true so that WLAN IPA
pipes can be connected correctly.
Change-Id: I27a14e627a1a75836f08dc5dec8c8b1d09725e10
CRs-Fixed: 2537625
Presently upon interface up a message is posted to the scheduler
to create the vdev, which sends the vdev create to the firmware,
for the vdev create there is no response from the firmware host
internally posts a fake message internally for the vdev create
response.
Dont post the vdev create to the scheduler thread but directly
send the vdev create to the firmware in the caller context.
Change-Id: Iafb186b13d948e421d152c3142cb8614fdbbffa6
CRs-Fixed: 2549530
For 6GHz support and to remove channel number ambiguity use policy
manager APIs updated for frequency in other modules. This change
covers following APIs:
policy_mgr_get_pcl
policy_mgr_update_with_safe_channel_list
policy_mgr_get_valid_chans_from_range
policy_mgr_get_valid_chans
policy_mgr_set_sap_mandatory_channels
policy_mgr_get_pcl_for_existing_conn
policy_mgr_get_mode_specific_conn_info
Change-Id: Ia21829345be2746cd3fc1f2337cfc90abf0c53f4
CRs-fixed: 2550092
For 6GHz support and to remove channel number ambiguity use policy
manager APIs updated for frequency in other modules. This change
covers following APIs:
policy_mgr_get_chan_by_session_id
policy_mgr_get_mcc_operating_channel
policy_mgr_check_and_set_hw_mode_for_channel_switch
policy_mgr_is_chan_ok_for_dnbs
policy_mgr_is_safe_channel
policy_mgr_valid_sap_conc_channel_check
policy_mgr_disallow_mcc
policy_mgr_add_sap_mandatory_chan
policy_mgr_remove_sap_mandatory_chan
policy_mgr_is_hwmode_set_for_given_chnl
policy_mgr_is_valid_for_channel_switch
policy_mgr_update_user_config_sap_chan
policy_mgr_is_sap_restart_required_after_sta_disconnect
policy_mgr_is_sta_sap_scc
policy_mgr_nan_sap_scc_on_unsafe_ch_chk
Change-Id: I682f8380d9dc41fc015d73f06b6e055d1d04ef97
CRs-fixed: 2545110
For 6GHz support and to remove channel number ambiguity use policy
manager APIs updated for frequency in other modules. This change
covers following APIs:
policy_mgr_allow_concurrency
policy_mgr_nan_sap_pre_enable_conc_check
policy_mgr_allow_concurrency_csa
policy_mgr_current_connections_update
policy_mgr_incr_connection_count_utfw
policy_mgr_update_connection_info_utfw
policy_mgr_get_channel_from_scan_result
policy_mgr_update_and_wait_for_connection_update
policy_mgr_get_sap_mandatory_channel
policy_mgr_checkn_update_hw_mode_single_mac_mode
Change-Id: I162c2b90a58539194907c5ecd6915eafecc635cc
CRs-fixed: 2545099
For 6GHz support and to remove channel number ambiguity use policy
manager APIs updated for frequency in other modules. This change
covers following APIs:
policy_mgr_is_chnl_in_diff_band
policy_mgr_check_for_session_conc
policy_mgr_handle_conc_multiport
policy_mgr_change_sap_channel_with_csa
policy_mgr_get_channel
policy_mgr_get_nondfs_preferred_channel
Change-Id: I4a6673db3a02b6e8d7fa94ae452338db618e3883
CRs-fixed: 2545099
Remove sta index references in TDLS structures and APIs
and mac address would be used instead to refer the peer.
Change-Id: I861f7ce068f3f545598129b9f3955b84b2a6fbce
CRs-Fixed: 2524512
Remove sta index in few prints and replace it
with MAC address as part of sta_index cleanup.
Change-Id: I689ede9dc345667f1a054f76bf3d08b236131c13
CRs-Fixed: 2524505
Update policy manager to use regulatory module API to get valid
channel list instead of MLME config item.
Change-Id: I2fa24c73892746de68ece00e50fd55d6135b7753
CRs-fixed: 2545120
Update policy manager data structures and APIs to use frequency
instead of channels. This is done to address channel number
ambiguity with introduction of 6GHZ band. Fix all references of
channel and add temporary internal functions for frequency
usage as replacement for public APIs using channels. Also modify
the channel list handling to frequency list in associated modules.
Change-Id: I11dff14a5fbe6d49cf411f8fce6863994ffccd75
CRs-fixed: 2540000
Implement metering stats quota to support ipa offload sta plus
sap wifi sharing use cases.
Change-Id: Ic9d5ad817ffb4d671a43f3f3aebb2d8cce293873
CRs-Fixed: 2517696
Currently the function ucfg_nan_get_ndi_state is not defined for the
case WLAN_FEATURE_NAN is not defined. As this is a public function
defined in dispatcher/inc/ and can be used externally, there would be a
compilation failure on such cases.
Resolve the failure by declaring ucfg_nan_get_ndi_state as static in the
case WLAN_FEATURE_NAN is not enabled.
Change-Id: I30297e8a3781f9a529c40a1423a9d2613c286f4e
CRs-Fixed: 2548223
Currently the value of force 1x1 exception is 2
which can lead to STA connection to a OUI AP in 1x1.
In a DBS configuration when AS is disabled, STA came
up in Single Mac mode in 2x2, and when a SAP came up
in DBS, then it sent out a SMPS to AP which lead to AP
crash. But very few APs have this behaviour, so it is
better to have a higher throughput than limit the
connection to 1x1.
Change-Id: I0ebd1ed2b764c3280151ca55117545349e474cbb
CRs-Fixed: 2538438
As a part of 802.11ax amendment, 6GHz band operation is added.
Since the 6 GHz channel numbers are overlapping with existing 2.4GHz
and 5GHz channel numbers, use frequency to identify unique channel
operation instead of channel number. Channel frequency is unique across
bands.
As part of above requirement add logic to process rx mgmt
packets based on the frequencies instead of channel numbers.
Change-Id: Ib063070738ecdb4f83379eafe50629778a490aae
CRs-fixed: 2522693
In WPA3 roam hybrid model, the SAE exchange/4-way handshake is
offloaded to the wpa_supplicant. After roam candidate selection,
firmware will send WMI_ROAM_PREAUTH_START_EVENTID to send SAE
authentication frame with the selected candidate. If the host
is in suspended state, then SAE preauthentication could fail.
So wakeup the host when WMI_ROAM_PREAUTH_START_EVENTID event is
received to carry out the SAE authentication with the provided
candidate
Change-Id: I7a89234e90e7fccef58ec3822dc0cda3740bad20
CRs-Fixed: 2512871
Currently if there are 3 connections in MCC on same
MAC, FW asserts.
If there are several bssid for same ssid and channel id from wpa
supplicant is 0, driver will sort candidate AP and try one by
one, vdev start channel isn't decided until candidate is
selected, need do concurrency allow check at that time, or lead
to 3 connections on the same MAC.
STA+STA MCC on same MAC has no benefit, total throughput is even
lower than single STA for channel switch frequently on same MAC.
so add check to disallow STA+STA MCC.
Change-Id: Id286096ea156915432807e42983c68cc83a8b42e
CRs-Fixed: 2545411
Add action_oui ini gActionOUIDisableAggressiveEDCA to identify peers for
which aggressive EDCA configuration causes some IOT issues.
Change-Id: Ifea0c224cef2378727c9f78d8b571ea9c57bb662
CRs-Fixed: 2507191
Normalize the weights of the frequencies for ACS scan
if the user has changed them in the ini.
This is done as legacy devices wont be able to scan
the newly added 6ghz frequencies, and thus wont
be able to associate with the SAP if it starts
on 6ghz channels.
Change-Id: I2dd2f706c248f5339bde06963540d0874d08b847
CRs-Fixed: 2543007
Currently in hdd_adapter, the variable sta_info is an array of
hdd_station_info structured indexed by the sta_id. As sta_id is no
longer used this array based implementation becomes unnecessary.
Move the sta_info implementation to a hash table implementation.
Change-Id: I7d6fe04b7e0ab22615d431de9a10a4ad38ed65ba
CRs-Fixed: 2514280
Since NAN has higher priority over TDLS, disallow TDLS link
when NAN is active.
Change-Id: I7de34dbb2f808c36358ac5266c26e2729b901941
CRs-fixed: 2537158
Based on the ini "ignore_fw_reg_offload_ind" ignore regulatory
offload indicatin from fw.
Change-Id: I6e20f2100eeac8e93baa5c5d3f3d1c8b33356aed
CRs-Fixed: 2532989
Replace timer_stop with timer_stop_sync & add some debug print to
track the roc cookie.
Change-Id: I9a71d30b31da3de2bf3242e4a310bad4542b10aa
CRs-Fixed: 2537164
CFG_VENDOR_ROAM_SCORE_ALGORITHM is added to specify the
preferred roam score algorithm.
With value 1, the new V2 roam score algorithm will be used.
With this roam score Algorithm, AP score will be calculated
based on below equation:
AP Score = (RSSIfactor * rssiweight(0.65)) +
(CUfactor * cuweight(0.35))
This algorithm value will be sent to firmware over the
WMI_AP_PROFILE command.
Change-Id: I5e7857108a9623fdf3e698cb842dbc22c21f61a1
CRs-Fixed: 2513571
As a part of 802.11ax amendment, 6GHz band operation is added.
Since the 6 GHz channel numbers are overlapping with existing 2.4GHz
and 5GHz channel numbers, use frequency to identify unique channel
operation instead of channel number. Channel frequency is unique across
bands.
As a part of above requirement frequency attribute is added to the
struct sSirMacChanInfo, in driver some APIs directly copies this
structure info considering as every member of the structure as uint8_t,
as frequency is uint32_t this breaks above asumption and results into
corrupt info and gives undefined behaviour.
To address above issue, use the structure members individually and
give the information by member-by-member copy.
Change-Id: Ied6ad30d8a0800211f99371969ddd192ff40545c
CRs-Fixed: 2537975
Merge from 2517936 & 2490501.
SMMU fault is observed for WDI 1.0 MCC TX when SMMU is enabled.
Issue is that dma_addr passed from IPA driver is iova of IPA
domain. WLAN driver directly uses the iova to do transmission.
Since iova is not mapped in WLAN domain, SMMU fault occurs.
Fix is to map skb to WLAN domain for TX when SMMU is enabled.
After doing DMA map, an offset of frag_header and ipa_header
is added to the iova and skb->cb is updated with the new iova.
After TX completion, skb DMA unmap is done but with the iova
of the above offset included, which leads to unmapped iova error.
Fix is to recalculate the iova and update skb->cb with new iova,
which has frag_header and ipa_header length removed.
Change-Id: Ib0112d6a3de6dc9af43e5c48a49085c7d4f41a9b
CRs-Fixed: 2534845
Currently the bitmap of action frames that can wake up the host
during suspend is sent via the wmi command
WMI_WOW_SET_ACTION_WAKE_UP_CMDID. This bitmap doesn't include
RRM action frames so currently the host doesn't wake up for rrm
action frames when in suspend mode.
Selectively enable wake up for rrm action frames during runtime PM
alone. Don't enable host wake up during normal suspend as it will
consume more power.
Change-Id: I097596118c2888fc9ea24802e4dbe69d02c5c5f7
CRs-Fixed: 2507185
If fw is down, there is no point to dsc panic. Thus, disable dsc panic
if fw is down.
Change-Id: I1128ea3f32b879305e19fdf45a6e3588a570bd4c
CRs-Fixed: 2535312
During wlan IPA suspend, force the bandwidth voting to high
when CFG_DP_IPA_ENABLE_FORCE_VOTING is enabled.
Change-Id: I9b368081f9c0919f5fecfacf318ad1a714cc33cf
CRs-Fixed: 2521815
For 3th connection bring up, if first two connections
are SCC on same mac (STA+SAP or SAP+SAP), third connection
(STA or SAP) is not supported on same mac. Previous
commit If30cf58d2b16fc3ff4dfff4f75d7eeaa51786cad
lost the same mac check.
Change-Id: I278e94cbb1e368af57327da869bd961237e7b4b6
CRs-Fixed: 2534987
