Move power stats from the debugs to sysfs. Also previously
power stats was maintained per vdev but the data received
from the firmware is per pdev. Hence move the power stats
implementation from vdev to pdev.
Change-Id: I10df003fe8f79d35d0758b56d971f4973d27750b
CRs-Fixed: 2345097
The primary data structure used within the protocol stack is currently
named sAniSirGlobal. This naming is problematic for two reasons.
First, the "Ani" and "Sir" are archaic references that should be
replaced throughout the driver. Second, camelCase is frowned upon by
the Linux coding style. In order to address these issues, rename
sAniSirGlobal to mac_context.
Change-Id: Ibaaeb5296e42a24c66d4adf4f720d32a9ae41888
CRs-Fixed: 2345128
QCA_CONFIG_SMP defined to support some thread scheduling features on
SMP target, while some variants defined only for SMP purpose are
referred out of this MACRO, like is_ol_rx_thread_suspended,
ol_rx_event_flag and ol_suspend_rx_event.
Defines separate functions for SMP/UP target to avoid it.
Change-Id: I01884644b7b77e55514cf00426609643386480e8
CRs-Fixed: 2344683
Currently pointer of the vdev object is sent to the callback
hdd_wmm_is_acm_allowed to get the adapter. But this can't
be used to get the adapter. Instead pass the vdev id to get the
adapter.
Change-Id: I3cb2f58d09a263c77a3696a36e863cc4137c7821
CRs-Fixed: 2341804
Enable the scatter-gather feature for wlan interface, if the wlan
interface is binding to the bridge, which might enable SG & TSO feature
for the bridge and improve the TCP TX throughput much better.
Change-Id: I26101756266878f9f41c5dc2d0b5dad189b44ee1
CRs-Fixed: 2246512
__wlan_hdd_cfg80211_change_iface will clear "concurrency_mode"
at the beginning, but in certain case it would be failed in middle of
create new mode adapter, then the "concurrency_mode" is not restored
to original one.
When supplicant trys again to call __wlan_hdd_cfg80211_change_iface,
the no_of_open_sessions will be "255".
That causes the "no_of_open_sessions" messed up.
Fix by restore "concurrency_mode" in error case.
Change-Id: Iac702dfb8204621e93456e2a0c0dbba5adeed838
CRs-Fixed: 2343478
In LFR2 roaming disassociation with old AP happens
immediately after preauth success. But policy_mgr
decrement this entry in association completion handler.
This results in policy_mgr assuming an extra connection
while checking hw mode. policy_mgr session for the
disassociated AP should be removed in disassoc success
response handler.
CRs-Fixed: 2316508
Change-Id: I41db1f5a365d3a510e27d10adcec2a7d765616d5
This fixes below build error.
format '%lu' expects argument of type 'long unsigned int',
but argument 6 has type 'unsigned int' [-Werror=format=]
Change-Id: I54b2e171ab5c7799af3e23a5d1fd8d4cb3034983
CRs-Fixed: 2344741
When override sap channel, call wlan_reg_set_channel_params
to update ch_params.
Change-Id: I4086ec8fea0d68547a1080b0ef455a0e9f64c0b7
CRs-Fixed: 2333666
Add the following HT Caps related INI/CFG items to MLME component.
gShortPreamble, CFG_HT_AMPDU_PARAMS, CFG_EXT_HT_CAP_INFO,
CFG_HT_INFO_FIELD, gEnableAMPDUPS and gMaxAmsduNum.
Change-Id: I019961016a2f0e39c7c62066c04788d3bd3d37e7
CRs-Fixed: 2318579
In STA mode, deauth frame is sent to AP due to disconnect
triggered as part of hdd_stop. Host did not receive deauth
tx complete event and FW_DOWN uevent is received after this.
As part of pe shutdown notifier cb, lim timers are deactivated.
This will result in cleanup failure and disconnect timeout.
Fix is to post SIR_LIM_DEAUTH_ACK_TIMEOUT message to lim
before deactivating the timer.
Change-Id: I75d8a8c861e89bb34526a0af92c446139a5bec1c
CRs-Fixed: 2344575
When scan cannot be cancelled timely after pre-auth response is received,
Then a second attempt of pre-auth request could be sent, which might be
referencing a wrong session and cause NULL pointer access.
Skip to send pre-auth request for such case.
Change-Id: Icb81830ef08cffc172b327e3a8ae170aea1ec58c
CRs-Fixed: 2272022
Add the following WMM BE VO ini configs to MLME cfg:
1. CFG_QOS_WMM_INFRA_DIR_AC_BK_NAME
2. CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_BK_NAME
3. CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_BK_NAME
4. CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_BK_NAME
5. CFG_QOS_WMM_INFRA_SBA_AC_BK_NAME
6. CFG_QOS_WMM_INFRA_UAPSD_BK_SRV_INTV_NAME
7. CFG_QOS_WMM_INFRA_UAPSD_BK_SUS_INTV_NAME
Introduce the basic infra APIs related to these configs
from mlme.
Change-Id: I1f8e6f0fa1ff15eda36a20ee06772c4a1ddd9ca8
CRs-Fixed: 2327690
Function csr_set_phy_mode() is not used. Since it is apparently
obsolete, remove it.
Change-Id: I742060a27e6501ee894348d2a915f50f550ef6da
CRs-Fixed: 2344316
Free roam_info in sme_rrm_send_scan_result for all error cases to
avoid memory leak.
Change-Id: I9a30c0c5e349d926092a881c4e2720100836e9d1
CRs-Fixed: 2344465
In function wma_send_bcn_buf_ll, bcn info is filled from
wma handle by mapping the vdev id. For valid vdev id also wma_handle
could have NULL beacon info. So, check for NULL pointer before
accessing the bcn pointer.
Change-Id: I660c8231801eb28962edc364a139e7980febb71e
CRs-Fixed: 2336946
As part of WIN BMI modularization, hif_bmi_register_callbacks
are removed from if_pci.c in qcacmn project. As a result,
MCL needs to invoke hif_bmi_register_callbacks in qcacld project.
Fix is to call bus agnostic hif_register_bmi_callbacks method
in bmi_download_firmware.
Change-Id: I72febb02150cf9c672bea4949c53f1b87fa69cdf
CRs-Fixed: 2332266
Add the following WMM BE VO ini configs to MLME cfg:
1. CFG_QOS_WMM_INFRA_DIR_AC_BE_NAME
2. CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_BE_NAME
3. CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_BE_NAME
4. CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_BE_NAME
5. CFG_QOS_WMM_INFRA_SBA_AC_BE_NAME
6. CFG_QOS_WMM_INFRA_UAPSD_BE_SRV_INTV_NAME
7. CFG_QOS_WMM_INFRA_UAPSD_BE_SUS_INTV_NAME
Introduce the basic infra APIs related to these configs
from mlme.
Change-Id: Ibaf06ba2df07a4805d31a4748809c44d143dd12e
CRs-Fixed: 2327689
Add the following WMM AC VI ini configs to MLME cfg:
1. CFG_QOS_WMM_INFRA_DIR_AC_VI_NAME
2. CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_VI_NAME
3. CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_VI_NAME
4. CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_VI_NAME
5. CFG_QOS_WMM_INFRA_SBA_AC_VI_NAME
6. CFG_QOS_WMM_INFRA_UAPSD_VI_SRV_INTV_NAME
7. CFG_QOS_WMM_INFRA_UAPSD_VI_SUS_INTV_NAME
Introduce the basic infra APIs related to these configs
from mlme
Change-Id: I320f49b216659937dc7f708fdbb7849ae415e249
CRs-Fixed: 2327687
Correct the configuration check to enable/disable the Tx SU
beamformee setting in 20MHz mode operation.
Change-Id: I958d5319acf98931187304f2c6fe2a9aff5991b7
CRs-Fixed: 2343849
Currently driver acquires wakelock for scans received from hdd.
But for RRM scan initiated from AP for beacon reports, the
wakelock is not acquired and if host goes to suspend while scan
is in progress,FW asserts.
Fix is to avoid the system suspend by taking the wakelock
before rrm scan start.
Change-Id: I02ddc9b5e6ba5f1782d00e34f044ace34c54d0b0
CRs-Fixed: 2331741
auth_failure_timeout is updated as part of
lim_check_and_announce_join_success for p2p client with NOA.
And the default value is stored in pe_session->defaultAuthFailureTimeout
After receiving the auth resp or in case of auth failure the
auth_failure_timeout is reset to default value. But there is any other
failure and pe session is deleted then the auth_failure_timeout is
not reset. And p2p cli connection will use the wrong auth timeout.
And can result in connection delay's if GO doesn't send the auth response.
Reset the auth_failure_timeout to defalut as part of pe_delete_session.
And decrease the max value to 5000ms.
Change-Id: I374bf45279f086127ef062b83a06049c895c4675
CRs-Fixed: 2343832
Currently in case of net tx timeout there is no information
which net tx queue is paused. So log the information of all
net tx queue state in case of tx timeout.
Change-Id: I0b92bd98ad68afcaba9b0f3babb135466bdfa503
CRs-Fixed: 2335572
All the changes related to Shadow register V2 are added to
defconfig build for lithium platform.
Kickstart them by enabling CONFIG_SHADOW_V2 in config.
CRs-Fixed: 2343779
Change-Id: I07c93b5d43edc5010e501ab06cc7050a6e8c9c7f
One of the HDD functions with the highest cyclomatic complexity is
__iw_setint_getnone(). In order to reduce the complexity there is a
plan to replace the existing switch with a vtable. As part of that
goal refactor the WE_SET_GTX_* ioctl handling into separate functions.
Change-Id: I8303aaaa8009e568684a9a54dbfd92ea98b3df5e
CRs-Fixed: 2343555
