MBO ies sent in tail buffer of beacon params
structure are not sent in beacon template to
firmware.
Fix is to add MBO ies in beacon template sent to fw
Change-Id: I3987bd431f9a21218650499afa16eac2b59e6486
CRs-Fixed: 2087752
In STA+AP concurrency case, driver fails to receive PNO STOP
indication from the upperlayer and thereby driver fails to send
same indication to FW, leading to a FW crash.
To mitigate this issue, during STA session close, issue PNO
stop indication to FW, if PNO is in progress.
Change-Id: If30e631fc5e8151cd5ecc66ff1d48627123a0a1e
CRs-Fixed: 2059793
Add support for indicating the new unified roam event
"cfg80211_roamed" which takes a structure to give roam information
to cfg80211.
Change-Id: I71769666e2112e0f443cb36d7db03cb7bdbaf1f2
CRs-Fixed: 2084891
The default value for the ini gdbs_scan_selection is set
with 2 DBS and 2 non-DBS Scan for Module id WLAN_MODULE_
ROAM (5) and WLAN_MODULE_HOST (16). Thus, the scan policy
for full scan is kept getting change for DBS scan and
legacy scan.
This change is to make the default value for the ini
gdbs_scan_selection as NULL, thus disabling the DBS scan
duty cycle feature by default.
Change-Id: I8dd304628b729e11a63aaa2b6dea972cff1798d7
CRs-Fixed: 2062420
Explicitly convert nl80211_chan_width to phy_ch_width in function
__wlan_hdd_cfg80211_set_mon_ch.
Change-Id: I3a35a417b1155db430d6f06444b42664365b02db
CRs-Fixed: 2071677
Replace sme_tspec_dir_type and sme_QosWmmDirType with sme_qos_wmm_dir_type
to avoid implicit conversion warnings/errors and to conform with linux coding
guidelines.
Change-Id: I1567ebbe7ec8adab3344d96f0d2aa93367975926
CRs-Fixed: 2071677
Fix implicit conversion from enumeration type 'tSirResultCodes' (aka
'enum eSirResultCodes') to different enumeration type 'QDF_STATUS'
[-Wenum-conversioni]
Change-Id: I72cbfb99d22d4747890b14d474a36b3c36d1c655
CRs-Fixed: 2071677
hdd_ipa_uc_loaded_uc_cb() allocates a msg buffer and passes it to
workqueue handler. Both hdd_ipa_uc_loaded_uc_cb() and workqueue
handler free the msg buffer, which leads to wrong memory dereference.
Fix is to return directly in hdd_ipa_uc_loaded_uc_cb() and let workqueue
handler free the msg buffer.
Change-Id: I842700e7fe94dc9a77fba966d918a054bc79f36a
CRs-Fixed: 2069189
sme_config is used as local variables with struct tSmeConfigParams
in multiple places causing stack frame size to increase. This is
causing build issues with 32 bit systems where the stack frame
size is limited to 1024 bytes for each frame.
Move multiple sme_config local variables to dynamic allocations to
reduce stack frame size.
Change-Id: I86a93546adf40bbbc19438c3b1e3a7ec0d38f39f
CRs-Fixed: 2074224
warning: implicit conversion from enumeration type 'tDriverType'
to different enumeration type 'enum driver_type' [-Wenum-conversion].
Move enum driver_type to QDF.
Change-Id: Ic89e4ee512a2d70c27324446257286aaafd49839
CRs-Fixed: 2055487
Due to the Change-Id: I3ad995636127a5fda0635549551a24cc5b1bd2c5
PARAM_A_BAND_PELT_THLD was incorrectly replaced with
PARAM_A_BAND_BOOST_THLD.
Fix this and bring back the attribute PARAM_A_BAND_PELT_THLD.
Change-Id: I83d21c2b4662c82d2f26f3bcd10a549889f6df1e
CRs-Fixed: 2055487
Split __wlan_hdd_cfg80211_set_ext_roam_params() into
multiple functions to improve readability of the code and
fix clang warning (-Wframe-larger-than).
Change-Id: I3ad995636127a5fda0635549551a24cc5b1bd2c5
CRs-Fixed: 2055487
Because of obsolete macros FEATURE_WLAN_LFR and WLAN_FEATURE_ROAM_SCAN_OFFLOAD
roaming capability is not properly set in get_supported_features.
Fix this by using the proper macros.
Change-Id: I4dec8c32c71fde01b663e11e60f1da171adee3e4
CRs-Fixed: 2067126
This is a qcacld-2.0 to qcacld-3.0 propagation.
Enable feature bits WIFI_FEATURE_CONTROL_ROAMING,
WIFI_FEATURE_IE_WHITELIST and WIFI_FEATURE_SCAN_RAND.
Change-Id: Ia0f136e038e7da040faae04eaa11bcf56bb72443
CRs-Fixed: 1102187
This is a qcacld-2.0 to qcacld-3.0 propagation
'wrqu->data.length' holds the total number of IE data buffer.
Add a check to make sure the number of remaining data to be read is
greater than or equal to IE length.
Also, advance the buffer pointer to point to the next element only
if next element is present.
Change-Id: Ic60f3e0650f365955dab4099eb8740e9789e00cc
CRs-Fixed: 1100132
Dump the last few (100) DPTRACE records when a cfg80211 disconnect is
received from the userspace with reason code WLAN_REASON_DEAUTH_LEAVING.
Change-Id: Ib370f8d8b71f20364e0da73a1aee5673c0fc4ca4
CRs-Fixed: 2029713
Unify hdd_register_interface() and hdd_register_hostapd(). Update
failure log with error status and device name in case of
register_netdevice(), register_netdev() or dev_alloc_name() failures.
Change-Id: I428c73d473de6dc2e61567129e9f2a7996631729
CRs-Fixed: 2085098
hdd_ipa->sta_connected in WLAN_CLIENT_DISCONNECT case is not under lock
protection and is prone to race conditions.
Fix is to release event_lock after checking sta_connected so as to avoid
possible race conditions.
Change-Id: I6206d5d0cc2cf5df02ab4caf0de810961da21006
CRs-Fixed: 2082525
propagation from qcacld-2.0 to qcacld-3.0.
While processing setpno ioctl, there is an out of bound memory
issue when Host is copying ioctl arguments to a local buffer.
While copying ioctl arguments, make sure valid indices are used.
Change-Id: I03078df7135f5f1daf1d9bead7d4410e58fb848a
CRs-Fixed: 1112355
Currently, auto powersave timers are deferrable. This means any pending
auto powersave timers will not fire while the device is supended, which
can have a negative impact on wlan power usage. Instead, flush any
pending auto powersave timers during the suspend process, to ensure
powersave is enabled while the device is suspended.
Change-Id: I5911ee30eaf770909b728af73958ba1bbaa8457f
CRs-Fixed: 2080812
Currently when IPA RX WDI pipe connect fails during start modules
host does not clean up the TX pipe which is allocated before the
RX pipe. As part of proper clean up from host in this change
disconnect the TX pipe handle when RX pipe connect returns failure.
Change-Id: Ic037dd2415ab5be497a0617d8151d63219868fd1
CRs-Fixed: 2040146
Setting gForce1x1Exception=1 in ini forces DUT to associate to
buggy AP's which are identified via OUI. Enable this feature by
default on all platforms by setting CFG_FORCE_1X1_DEFAULT=1.
Change-Id: Ic459d821f4aedba966beab8ca8ca977b7b639e34
CRs-Fixed: 2084927
qcacld-2.0 to qcacld-3.0 Propagation.
Operation classes supported can be controlled by user, which can
be sent greater than the max supported operations. This results
in stack overflow in change station command.
Add check to validate operations supported param given by user
and if it exceeds max supported value, set it to max supported
value.
CRs-Fixed: 2002052
Change-Id: Idd3a35e38b091546a17d7ec6329f19429e5c289c
qcacld-2.0 to qcacld-3.0 propagation.
In hdd_set_rx_filter API multicastAddr array being accessed beyond
its size.
Add boundary check for multicastAddr.
CRs-Fixed: 1104565
Change-Id: I8e1543a8f42ac40c04d2c6a17e69718d13cbd706
qcacld-2.0 to qcacld-3.0 propagation.
In __wlan_hdd_cfg80211_testmode API no checks are in place that
ensure that buflen is smaller or equal the size of the stack
variable hb_params. Hence, the vos_mem_copy() call can overflow
stack memory.
Add buf len check to avoid stack overflow
CRs-Fixed: 1105085
Change-Id: I6af6a74cc38ebce3337120adcf7e9595f22d3d8c
NS Offload is not supported in IBSS mode. Configuring it while
in IBSS mode causes crash in firmware.
Do not allow ns offload in IBSS mode.
Change-Id: I1f6cf7b6c65238a9335f828321487ea784a4512b
CRs-Fixed: 2035449
Currently if only one address is provided in wlan_mac.bin, it is updated
for interface wlan0. It will be copied to interface p2p0 if a specific
configuration is present. softap0 retains its mac address either generated
from serial number or given through Firmware ready event. This doesn't
guarentee a unique mac address to both these interfaces.
Regardless of configuration Both softap0 and p2p0 should have a unique
mac address with locally administered bit set.
Change-Id: I64299f5c2e2376c8dbdb26ea34ba0187d5d1f28d
CRs-Fixed: 2066086
Currently during IPA pipes connect host is passing size of each TX
completion ring size as 4 bytes instead of 8 bytes which is expected
by IPA driver. Reason is host passes size of each ring as size of
dma_addr_t which is 4 bytes for 32 bit host architecture where as
bus addresses are of 8 bytes on MAC and IPA. Fix this by passing the
size which is correct and expected by the IPA driver.
Change-Id: Ib081a3819d3a5e4f7ac61606d5ecb9aa5f3242c8
CRs-Fixed: 2037661
Propagation from qcacld-2.0 to qcacld-3.0.
There is a possibility to read uninitialized memory within api
__wlan_hdd_cfg80211_testmode.
To resolve this issue, initilaize buffer hb_params with zero.
Change-Id: Ia8061610a8c35aa7290177c0dcd2c5c36d9fcb35
CRs-Fixed: 2075796
The vendor command QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_GET_VALID_CHANNELS
coming in netdev down state resulting in crash.
Add WIPHY_VENDOR_CMD_NEED_RUNNING flag to reject the vendor command
QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_GET_VALID_CHANNELS if netdev is down.
CRs-Fixed: 1109145
Change-Id: I007341a51ccdd1b5cf5b6e2319c8b71d4f26f9ce
Currently sending qpower to FW in softap mode causes device to crash as
qpower config is not supported.
Enable QPOWER config in STA and P2P-CLI modes.
Change-Id: Idb8b3ac79e6c93533b752ac42d6ab57bb0c86579
CRs-Fixed: 2003839
Currently while registering wiphy, supported Beamformee STS Capability
and Number of Sounding Dimensions are not updated in the vhtcap field.
This results in hostapd failing to start if above two configurations
are enabled in the conf file.
Update missing vht capabilities in wiphy before registering.
Change-Id: I8db376fe1f14fd5b722e67a5889addf4c2fb7f28
CRs-Fixed: 2062520
In packet log header, element type_specific_data used uninitialised.
Initialise type_specific_data.
CRs-Fixed: 2015997
Change-Id: Ifa2bdc4c10528c8e9781249058e1767d64bec60e
In packet logs currently HB failure, HO failure and No scan results
are marked as Non Fatal and because of that, these failures are not captured
in packet logs.
Fix this by making these events as FATAL.
Change-Id: I6db2f3cd843b7f84081332f2385fbfb0a2992078
CRs-Fixed: 2061842
In certain cases HDD fails to receive callbacks for the scan requests
queued to SME. Kernel may free up these scan requests due to timeout.
During driver shutdown and exit if scan done is performed on these
stale scan requests, kernel crash may occur.
Set a timer of 60 seconds on queued scan requests, after expiry BUG_ON
for debugging purposes.
Change-Id: I6db155b17a8a5ae87208ec84eaab221a53623a63
CRs-Fixed: 2070594
If registration of callback 'hdd_send_action_cnf_cb' fails with PE due
to some error case, then PE is not going give the ack confirmation
for action frames which can lead to in p2p connection failure.
CRs-Fixed: 2075708
Change-Id: Ia7b670f186975f5139e37e79230de56bc8ab868b
During wlan disconnect before disabling tx queues, observed continuous
logs in ndo_start_xmit, because of invalid station ID, leading to WD bark.
Move log level to info from error, if driver fails to find valid station
ID while processing ndo_start_xmit.
CRs-Fixed: 2022473
Change-Id: I122219d22e2e19ddb3ca6aa60c38177f2a95ac43
Add support for 5Ghz network RSSI boost/penalty preference
based on ini values.
Change-Id: Ia3ae5dcc35b9a85fde5a609f8f27ff8b4bc35cec
CRs-fixed: 1085554
