Srinivas Dasari b6cf30725e qcacld-3.0: Provide SNR value as SIGNAL_INFO to userspace for SAP ... Currently, userspace is expecting SNR value through NL80211_STA_INFO_SIGNAL for a disconnected client of SAP. But the driver sends RSSI value by doing noise floor to the SNR value received from firmware. Convert this back to SNR and provide to userspace as per the definition of NL80211_STA_INFO_SIGNAL and to be in sync with the existing implementation of userspace. Change-Id: Ia360424a9d44e48fae5a85cf0d2c577e92cd93be CRs-Fixed: 2552542		2019-11-22 02:21:44 -08:00
..
hdd_config.h	qcacld-3.0: Set 5G band capability bit in gActionOUIConnect1x1 ini	2019-11-18 02:29:15 -08:00
hdd_dp_cfg.h	qcacld-3.0: Fix CFG_RX_MODE_DEFAULT redefined error	2019-10-15 05:16:12 -07:00
qc_sap_ioctl.h	qcacld-3.0: Move sta_info from array based to hash based	2019-10-15 00:48:54 -07:00
wlan_hdd_apf.h	qcacld-3.0: Remove WLAN_WAIT_TIME_APF_GET_CAPS	2019-01-07 08:46:41 -08:00
wlan_hdd_assoc.h	qcacld-3.0: Fix failure of NDP peer save	2019-11-15 21:00:09 -08:00
wlan_hdd_bcn_recv.h	qcacld-3.0: Handle BEACON_REPORTING_DO_NOT_RESUME vendor attribute	2019-06-18 07:51:15 -07:00
wlan_hdd_cfg.h	qcacld-3.0: Add operating frequency in hdd_config	2019-09-20 23:36:02 -07:00
wlan_hdd_conc_ut.h
wlan_hdd_data_stall_detection.h
wlan_hdd_debugfs_coex.h	qcacld-3.0: Add support to improve coex logging	2019-03-29 00:47:53 -07:00
wlan_hdd_debugfs_csr.h	qcacld-3.0: Fix markings	2019-02-22 21:23:30 -08:00
wlan_hdd_debugfs_llstat.h
wlan_hdd_debugfs.h
wlan_hdd_driver_ops.h	qcacld-3.0: Wait for PM freeze when turning wifi on	2019-09-04 22:23:52 -07:00
wlan_hdd_ether.h
wlan_hdd_ftm.h
wlan_hdd_fw_state.h	qcacld-3.0: Support firmware state check through cfg80211 vendor cmd	2019-03-01 09:23:49 -08:00
wlan_hdd_he.h	qcacld-3.0: Cleanup He cap INI items	2019-01-14 17:32:29 -08:00
wlan_hdd_host_offload.h	qcacld-3.0: Replace multiple IPv4/v6 address len macros with QDF macro	2019-04-16 19:57:47 -07:00
wlan_hdd_includes.h
wlan_hdd_ipa.h	qcacld-3.0: abstract Linux identifiers from IPA component	2019-05-31 02:29:49 -07:00
wlan_hdd_lro.h	qcacld-3.0: Remove obsolete hdd_lro_init() stub	2018-12-06 23:09:57 -08:00
wlan_hdd_main.h	qcacld-3.0: Provide SNR value as SIGNAL_INFO to userspace for SAP	2019-11-22 02:21:44 -08:00
wlan_hdd_misc.h	qcacld-3.0: add build flag DYNAMIC_SINGLE_CHIP	2019-04-30 22:27:24 -07:00
wlan_hdd_mpta_helper.h	qcacld-3.0: Add MPTA helper support	2019-03-15 07:46:59 -07:00
wlan_hdd_nan.h	qcacld-3.0: Remove unused wlan_hdd_cfg80211_nan_*() stubs	2019-03-07 22:22:42 -08:00
wlan_hdd_napi.h
wlan_hdd_oemdata.h	qcacld-3.0: Convert legacy chan ID usage to chan freq	2019-11-12 02:35:14 -08:00
wlan_hdd_p2p.h	qcacld-3.0: Process rx_mgmt_pkt based on frequency	2019-10-18 02:55:17 -07:00
wlan_hdd_packet_filter_api.h	qcacld-3.0: Use vdev_id in wlan_hdd_set_filter()	2019-02-27 09:55:42 -08:00
wlan_hdd_packet_filter_rules.h
wlan_hdd_power.h
wlan_hdd_regulatory.h	qcacld-3.0: Update regulatory configs before use	2019-11-21 04:41:29 -08:00
wlan_hdd_softap_tx_rx.h	qcacld-3.0: Move sta_info from array based to hash based	2019-10-15 00:48:54 -07:00
wlan_hdd_spectralscan.h	qcacld-3.0: Set rx chainmask before start spectral scan	2019-09-14 21:25:56 -07:00
wlan_hdd_sysfs.h	qcacld-3.0: Add Host Driver support for Beacon reception stats	2018-12-11 12:27:05 -08:00
wlan_hdd_tdls.h	qcacld-3.0: Cleanup sta_index in TDLS structures and APIs	2019-10-22 09:05:33 -07:00
wlan_hdd_trace.h
wlan_hdd_tsf.h	qcacld-3.0: Add support for gpio based strobe to capture tsf	2019-08-21 00:06:01 -07:00
wlan_hdd_twt.h	qcacld-3.0: Re-enable TWT before host TWT trigger mode	2019-10-09 16:16:43 -07:00
wlan_hdd_tx_rx.h	qcacld-3.0: Add support to flush rx packets for a vdev	2019-11-01 00:17:18 -07:00
wlan_hdd_wext.h	qcacld-3.0: Add support to configure HE SGI for SAP	2019-09-25 04:58:53 -07:00
wlan_hdd_wmm.h	qcacld-3.0: Rename HDD identifier wmmPrevTrafficCnt	2019-03-13 09:31:53 -07:00
wlan_hdd_wowl.h