Joe Taylor
013c06b6ca
Fix a probmel with decoding FT4 from .wav files.
2019-04-03 09:25:32 -04:00
Joe Taylor
c8dae29425
Synchronized FT4 auto-sequencing now works.
2019-04-02 13:27:55 -04:00
Joe Taylor
181e5c7b9d
Remove unused code left over from asynchronous FT4 mode.
2019-04-02 13:16:06 -04:00
Joe Taylor
d579e5973e
Correct the size of saved FT4 .wav files.
2019-04-02 13:04:40 -04:00
Joe Taylor
d1c5bbecfe
Add the new ft4_decode file.
2019-04-02 12:21:03 -04:00
Joe Taylor
fd239d9c07
Clean up some timing issues with time-synchronized FT4.
2019-04-02 11:39:28 -04:00
Joe Taylor
888b5fee28
Make "Tx 1st/Even" visible in FT4 mode.
2019-04-01 14:40:16 -04:00
Joe Taylor
e0d4c94cc1
Some very basic functionality for time-synchronized FT4.
2019-04-01 14:23:10 -04:00
Bill Somerville
90afae422b
UDP message client accepts any sender id on incoming datagrams
...
This is a defect repair as it was intended that the message id is the
sender identification but the erroneous implementation enforced it to
be the receiver identification as sent with previous outgoing
messages.
2019-04-01 11:05:53 +01:00
Steve Franke
c7ec9b1927
Fix indenting. No functional changes.
2019-03-30 16:40:24 -05:00
Steve Franke
68f82c95de
FT4: Only do the big FFT once for each candidate. Duh.
2019-03-30 15:55:05 -05:00
Steve Franke
68308e23aa
FT8: Tx waveform will now change (after a short delay) if Tx message is changed after a transmission has started.
2019-03-29 15:30:50 -05:00
Bill Somerville
9e75b5c2b5
Log buttons
2019-03-29 02:54:30 +00:00
Steve Franke
73efc09392
Speed up sync.
2019-03-28 14:34:03 -05:00
Steve Franke
5e1637a5db
Fix a bug and remove a redundant sanity check.
2019-03-28 14:01:30 -05:00
Joe Taylor
67b9f327a5
Merge branch 'release-2.1.0' of bitbucket.org:k1jt/wsjtx into release-2.1.0
2019-03-28 13:21:02 -04:00
Joe Taylor
e3d4a1c3a6
FT4: double-click on a yellow Tx mesage causes re-sending that message.
2019-03-28 13:08:43 -04:00
Joe Taylor
54cd97f918
Protect against bad inferred candidate frequencies f0 in FT4 mode.
2019-03-28 13:07:37 -04:00
Steve Franke
fe8aa87401
Add some sanity checks to getcandidates4.f90
2019-03-28 11:13:26 -05:00
Steve Franke
3490c0d1e3
Merge branch 'release-2.1.0' of bitbucket.org:k1jt/wsjtx into release-2.1.0
2019-03-28 11:02:20 -05:00
Steve Franke
23c54540e7
Increase maximum wav file length to 20s.
2019-03-28 10:59:20 -05:00
Joe Taylor
e4ebddcf13
When Tx1 entry is disabled, Tx1 button should also be disabled.
2019-03-28 10:41:56 -04:00
Joe Taylor
6f00ec79a2
Merge branch 'release-2.1.0' of bitbucket.org:k1jt/wsjtx into release-2.1.0
2019-03-28 09:47:50 -04:00
Joe Taylor
1da4809e1b
Do not disable double-clicking when m_inQSOwith is populated. (Correct???)
2019-03-28 09:41:38 -04:00
Joe Taylor
e571349c69
In FT4 mode, let the Tx# buttons start a transmission.
2019-03-28 09:30:26 -04:00
Joe Taylor
cfb36395e0
Add some better usage examples for ft4sim.
2019-03-28 09:22:29 -04:00
Joe Taylor
580fce8320
Allow oddball file names for input to ft4d.
2019-03-28 09:21:01 -04:00
Steven Franke
4fdbf93e40
Merge branch 'release-2.1.0' of bitbucket.org:k1jt/wsjtx into release-2.1.0
2019-03-27 20:55:39 -05:00
Steven Franke
a605ff4050
For now, limit noise level estimation to [300,2500] Hz.
2019-03-27 20:55:15 -05:00
Joe Taylor
43c38de884
Minor tweaks for FT4 debugging and possible tuning.
2019-03-26 14:00:32 -04:00
Bill Somerville
303ff7da5f
Improved CMake script for 64-bit builds on MS Windows
2019-03-25 18:02:50 +00:00
Bill Somerville
40e710d7f8
Bump release candidate number
2019-03-23 01:24:10 +00:00
Bill Somerville
0d42ad5b3e
Revert RC number and fix CMake build script
2019-03-23 01:21:42 +00:00
Bill Somerville
d0c6c28796
Bump RC number for v2.1.0
2019-03-22 23:14:30 +00:00
Bill Somerville
92a4d343de
Prep for v2.1.0-rc1 release
2019-03-22 22:37:41 +00:00
Bill Somerville
d6eff44b54
Updated AD1C CTY.DAT file (19th March 2019 Big CTY.DAT version)
2019-03-22 22:30:42 +00:00
Bill Somerville
158f929249
Merge branch 'feat-ft2' into develop
2019-03-22 22:23:25 +00:00
Bill Somerville
74ff96c607
Add new FT4 sample WAV file to CMake script
2019-03-22 22:19:51 +00:00
Bill Somerville
d862449dc8
Merge branch 'develop' into feat-ft2
2019-03-22 20:51:42 +00:00
Bill Somerville
080ab02223
Merge branch 'hotfix-2.0.2' into develop
2019-03-22 20:50:53 +00:00
Joe Taylor
68ee0a6bca
Add a sample file for FT4.
2019-03-22 16:16:05 -04:00
Joe Taylor
665dbd0f78
With Alternate F1-F5 checked, let Ctrl+F1 send the message in Tx1.
2019-03-22 13:52:06 -04:00
Joe Taylor
e38091705b
In FT4 mode, let F11 and F12 move Tx freq by +/- 120 Hz.
2019-03-22 10:57:09 -04:00
Joe Taylor
974cf50e16
Red label (ui->labDXped) should disappear in FT4 modeif we leave all contest modes.
2019-03-22 09:24:52 -04:00
Joe Taylor
2f0ff14134
Enable NA_VHF contest messages in FT4 mode.
2019-03-22 08:49:22 -04:00
Joe Taylor
e2db793b5d
Don't save .wav files in FT4 mode unless SaveAll is checked.
2019-03-22 08:20:19 -04:00
Steve Franke
0fef707118
Widen candidate frequency offset window to f0=[10,4990] Hz.
2019-03-21 13:27:10 -05:00
Joe Taylor
212e4a3c07
Add a timeout message for what will become v2.1.0-rc1.
2019-03-21 12:36:38 -04:00
Joe Taylor
ffb6d3624f
In FT4 mode, display only "for us" and Tx messages in right window.
2019-03-21 09:33:37 -04:00
Bill Somerville
0dc43a0693
Add FAQ item explaining how to fix configurations on KDE Linux desktops
2019-03-15 17:43:13 +00:00
