Joe Taylor
13b6900373
Add plog to the parameters written to q65_decodes.dat.
2021-03-12 14:44:47 -05:00
Joe Taylor
41ce20101f
Q65 sync curves linear up to 10, then logarithmic. AutoClrAvg only for decodes at RxFreq, and never for "lagain" decode attempts.
2021-03-12 14:27:58 -05:00
Steven Franke
1d590b81f5
Prevent a crash when widegraph lower limit is 0 Hz.
2021-03-10 13:10:47 -06:00
Joe Taylor
2048b3fec3
Tweaks to the way orance/red (==> single/avg) sync curves are displayed.
2021-03-09 14:41:36 -05:00
Joe Taylor
dda3c9d0cc
First cut at displaying a Q65 sync curve for both current sequence and accumulated average. May not be quite right, yet...
2021-03-07 11:41:56 -05:00
Joe Taylor
ce839e1d2e
Trying to isolate the cause of bad data appearing in red.dat.
2021-03-05 14:57:26 -05:00
Joe Taylor
3f5705ac74
Fix for possible out-of-bounds nutc.
2021-03-05 13:28:14 -05:00
Charlie Suckling
7defc8846d
Adds Single Tone capability to q65sim
2021-03-04 11:15:54 +00:00
Bill Somerville
22f1ba6a6d
Merge branch 'support-2.3.1' into release-2.4.0
2021-03-03 23:58:39 +00:00
Joe Taylor
0e6f536d3e
Remove a few more vestiges of ISCAT mode.
2021-03-03 11:59:03 -05:00
Joe Taylor
4573c78acd
Remove iscat Fortran routines.
2021-03-03 11:52:36 -05:00
Joe Taylor
333c4da0b4
Re-enable "Save Decoded" for Q65.
2021-02-27 11:50:13 -05:00
Joe Taylor
94b273edc1
Allow blank MyCall when jt9 run from command line.
2021-02-26 11:28:14 -05:00
Joe Taylor
b4723d3186
Use Decode = Fast unless file 'ndepth.dat' is present in CWD.
2021-02-25 18:43:44 -05:00
Joe Taylor
7ad8816170
Kludge to allow specifying blank "hiscall" when jt9 is executed from command line.
2021-02-25 15:19:44 -05:00
Joe Taylor
19512c00f1
More tweaks to the Fast?normal/Deep settings in Q65 mode.
2021-02-25 12:45:07 -05:00
Bill Somerville
01dff71070
Re-enable EU VHF Contest mode messages in MSK144 mode
...
Also bring message checking utilities up to date with the latest EU
VHF Contest mode source encodings.
2021-02-24 02:21:31 +00:00
Joe Taylor
94c31572d2
More tweaks to the Fast/Normal/Deep parameters.
2021-02-23 16:13:46 -05:00
Joe Taylor
0765a1cc06
Working on tweaks to the Fast/Normal/Deep decoding options.
2021-02-23 11:32:38 -05:00
Joe Taylor
a8200fdfdd
Rempove remaining QRA64 code and direcories.
2021-02-23 09:20:46 -05:00
k9an
4b1077f897
Fix a mis-spelled warning message.
2021-02-20 08:39:53 -06:00
Joe Taylor
7192f53e68
Code cleanup.
2021-02-19 09:47:30 -05:00
Joe Taylor
b156ecd3a1
New method for measuring SNR of decoded Q65 signals.
2021-02-19 09:44:03 -05:00
Steven Franke
b194cc1a14
FST4: Do not bail out of blanker loop after 1st decode.
2021-02-18 14:26:56 -06:00
Joe Taylor
23eb287449
Correct a typo.
2021-02-16 12:55:59 -05:00
Joe Taylor
10e08b0e94
Much better algorithm for detecting and removing birdies in Q65.
2021-02-12 13:26:22 -05:00
Joe Taylor
1aad2fdbda
Q65: Supppress birdies and don't display decode lines with blank message.
2021-02-11 11:30:35 -05:00
Joe Taylor
3962a1eeba
Merge branch 'release-2.4.0' of bitbucket.org:k1jt/wsjtx into release-2.4.0
2021-02-10 13:56:56 -05:00
Joe Taylor
6395087e6f
Tweak the averaging scheme: now straight avg up to N=4, then expenential with ntc=4.
2021-02-10 11:14:46 -05:00
Charlie Suckling
b58ce90a9f
Now generates a filename for 15s periods that works with averaging
2021-02-09 13:47:40 +00:00
Charlie Suckling
d91404bbb1
Modification to make filenames compatible with Q65 averaging
2021-02-09 13:47:33 +00:00
Joe Taylor
a6779ecda3
Use exponential message averaging (ntc=3) rather than simple sums in Q65.
2021-02-08 11:10:02 -05:00
Joe Taylor
3ccf949691
Save nrc (number of q[0124] iterations) to q65_decodes.dat.
2021-02-08 09:24:16 -05:00
Joe Taylor
f9a771b422
Q65 parameter ibwa should not be larger in Normal/Deep than in Fast. Corrected.
2021-02-06 09:43:14 -05:00
Joe Taylor
ade40fabf5
Be sure that Q65 nsps cannot remain undefined, and can't stop jt9[.exe].
2021-02-05 14:14:22 -05:00
Joe Taylor
7180c40754
Fix the source of a bounds error in JT4 decoder. (Why was this not a problem in v2.3?)
2021-02-05 14:03:18 -05:00
Joe Taylor
ebd41fabcc
Don't use CWD writes such as 'fort.33' in production versions!
2021-02-03 15:20:37 -05:00
Joe Taylor
9ca57f9a5c
Protect against a possible bounds error.
2021-02-02 11:39:29 -05:00
Joe Taylor
14d18306e6
Use single_decode and lagain as intended in Q65.
2021-02-02 09:58:04 -05:00
Joe Taylor
5850317de0
Speed improvements for Q65 multi-decode.
2021-02-02 09:27:40 -05:00
Joe Taylor
7d069c5617
Don't get too close to the Wide Graps frequency limits.
2021-02-01 15:52:25 -05:00
Joe Taylor
34cb4c502d
Eliminate some redundant candidates.
2021-02-01 14:23:49 -05:00
Joe Taylor
72a4158898
First working multi-decode procedure for Q65.
2021-02-01 13:28:59 -05:00
Joe Taylor
86ada8c9d4
Working toward multi-decode capability.
2021-02-01 10:54:04 -05:00
Joe Taylor
6519c07a71
Working toward a good multi-decode solution ...
2021-01-31 15:10:50 -05:00
Joe Taylor
f7cde117fe
Extens orange sync surve to the full displayed frequency range.
2021-01-31 13:41:32 -05:00
Joe Taylor
cae3095174
Allocate and use 2d CCF only within q65_ccf_85().
2021-01-31 11:39:04 -05:00
Joe Taylor
ec6fe749f9
Update the Q65 test program.
2021-01-31 09:06:20 -05:00
Joe Taylor
b8ea4c1c2c
Zero the red curve in we're not trying for q3 decodes.
2021-01-30 15:23:30 -05:00
Joe Taylor
9e822d1806
Clean up possible cases where rms evaluates to 0.0.
2021-01-30 15:10:05 -05:00
Joe Taylor
2f5c368aad
Remove a diagnostic write.
2021-01-30 14:59:55 -05:00
Joe Taylor
14c4164651
Remove the if(snr1.lt.2.8) test, for now.
2021-01-30 14:52:53 -05:00
Joe Taylor
7bd1249452
Code cleanup involving ccf1, ccf2, and plotting thereof.
2021-01-30 14:12:02 -05:00
Joe Taylor
1e7c53e0e4
Fix several comments.
2021-01-30 11:49:08 -05:00
Joe Taylor
791b39fce5
Estimate rms of ccf2 without using the 2-dimensional ccf().
2021-01-30 11:36:43 -05:00
Joe Taylor
316f41996e
Correct a flaw in setting ipk. Better loop ordering in ccf_22.
2021-01-30 10:59:46 -05:00
Joe Taylor
330ff03079
Move writing the red/orange sync curves into a subroutine.
2021-01-29 14:43:06 -05:00
Joe Taylor
f056fc99ec
Write parameters for successful decodes to file q65_decodes.dat.
2021-01-28 13:01:52 -05:00
Joe Taylor
48713f0f38
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280
2021-01-28 07:43:14 -05:00
Joe Taylor
4e27b009f0
Code cleanup, looking toward possible implementation of -120F and -300F submodes.
2021-01-27 13:19:39 -05:00
Joe Taylor
29a2737cf7
Clean up spec64, now that QRA64 mode is gone.
2021-01-27 11:12:57 -05:00
Bill Somerville
332ecfebf8
Leave global FFTW3 clean up to main programs
2021-01-26 21:35:13 +00:00
Bill Somerville
bd02e367f2
Leave global FFTW3 clean up to main programs
2021-01-26 21:34:10 +00:00
Steven Franke
2335575436
FST4/W: Disable envelope shaping at start and end of transmission when environment variable FST4_NOSHAPING=1. Works for fst4sim too.
2021-01-25 15:52:07 +00:00
Joe Taylor
fb13265f37
Make ibwb larger by 1.
2021-01-23 14:14:17 -05:00
Joe Taylor
1489513803
Decodes without "newdat" should not add s1 into s1a again.
2021-01-23 10:58:28 -05:00
Bill Somerville
899a7fd895
Merge branch 'develop' into feat-fst280
2021-01-22 22:27:34 +00:00
Joe Taylor
b64520591f
Don't smooth at all if nsmo = 1: i.e., set it to nsmo=0.
2021-01-22 15:16:21 -05:00
Joe Taylor
8a436b63dd
Separate message averaging for Odd and Even sequences.
2021-01-19 16:06:10 -05:00
Joe Taylor
0cc67bbc59
Separate accumulations of odd/even sequences in s1a. Still need to fix navg ==> navg(0:1).
2021-01-19 15:30:17 -05:00
Joe Taylor
39024253d2
Fix the oddball values of DT and f0 sometimes being displayed.
2021-01-19 14:11:21 -05:00
Joe Taylor
d815eb7592
Replace the 'nsmo' smoothing: it is indeed useful, sometimes. (Can we have it both ways?)
2021-01-19 09:24:30 -05:00
Steven Franke
86b0affc56
FST4/W: Disable envelope shaping at start and end of transmission when environment variable FST4_NOSHAPING=1. Works for fst4sim too.
2021-01-18 13:47:54 -06:00
Joe Taylor
baa029f4ba
Add some descriptive documentation to the q65.f90 module.
2021-01-18 10:18:38 -05:00
Joe Taylor
6d220d46d2
Do not attempt decoding after TRp is increased and Decode button clicked.
2021-01-18 09:25:58 -05:00
Joe Taylor
a9bce0dbd3
Don't allow a decode attempt with previous data if TRperiod has increased.
2021-01-17 19:50:58 -05:00
Joe Taylor
2aee8d9d62
Resize s1a when required.
2021-01-17 14:31:56 -05:00
Joe Taylor
a53b3dc697
Computing 2d ccf over all freqs takes too long and too much memory. There's a better way! Remove the 'nsmo' smoothing: it's not helpful.
2021-01-16 14:18:15 -05:00
Joe Taylor
20aa3a8e23
Fix ia2 definition.
2021-01-16 12:24:42 -05:00
Joe Taylor
397c31a62d
Extend red/orange sync curves to full width. Display navg on status bar.
2021-01-16 12:21:13 -05:00
Joe Taylor
b343deb8cd
Correct a problem with reporting DT and f0 for Q65 'q3' decodes.
2021-01-16 10:21:34 -05:00
Bill Somerville
455ec12e44
Merge branch 'develop' into feat-fst280
2021-01-15 22:14:36 +00:00
Bill Somerville
63851911b5
Merge branch 'release-2.3.0' into develop
2021-01-15 21:54:14 +00:00
Joe Taylor
1f9eeb52cc
Add user option for Auto_Clear_Avg after a decode.
2021-01-15 14:12:52 -05:00
Joe Taylor
ada5a60124
All types of Q65 message averaging are now implemented and functional.
2021-01-15 12:40:38 -05:00
Joe Taylor
b64c1faba4
Prepare for doing AP=012 decodes from s1a.
2021-01-14 15:52:51 -05:00
Joe Taylor
70a3481a4f
Improved organization for obtaining 'q3n' decodes.
2021-01-14 15:39:48 -05:00
Joe Taylor
cbb939453f
Code cleanup.
2021-01-14 15:19:33 -05:00
Joe Taylor
921831119c
Message averaging now working for 'q3n' decodes.
2021-01-14 14:56:37 -05:00
Joe Taylor
02d410d4f7
Send both idec and navg to the q65 callback routine.
2021-01-14 13:23:09 -05:00
Joe Taylor
fca6d482f7
Radionalize the reporting of idec values.
2021-01-14 13:13:40 -05:00
Joe Taylor
0abdff0216
Clean up the usage of q65_dec_q3, q65_ccf_85, and q65_ccf_22.
2021-01-14 10:58:11 -05:00
Joe Taylor
e0d6e362e8
Make separate sync subroutines q65_ccf_85() (all 85 symbols) and q65_ccf_22() (sync symbols only).
2021-01-14 10:43:50 -05:00
Joe Taylor
32a9f0bc31
Move more variables into public q65 module space.
2021-01-14 10:25:35 -05:00
Joe Taylor
121fd2c3dd
Fix a logical test on idec.
2021-01-13 15:29:57 -05:00
Joe Taylor
f0808942e5
Move q65_dec0 into q65 module.
2021-01-13 14:50:07 -05:00
Joe Taylor
bfca40aa1c
Rename q65_sync to q65_dec0.
2021-01-13 14:34:20 -05:00
Joe Taylor
0922a6ca6e
Fix several undefined variables.
2021-01-13 14:23:50 -05:00
Joe Taylor
80a7b8c8af
More into q65 module.
2021-01-13 11:44:29 -05:00
Joe Taylor
f05654e19d
More into q65 module.
2021-01-13 11:38:49 -05:00
Joe Taylor
a5a1eed681
More into q65 module.
2021-01-13 11:29:33 -05:00
Joe Taylor
18100fd259
More into q65 module.
2021-01-13 11:21:59 -05:00
Joe Taylor
df8ad7a8d9
More into q65 module.
2021-01-13 11:07:20 -05:00
Joe Taylor
201004a47d
Move more into q65 module.
2021-01-13 10:55:01 -05:00
Joe Taylor
dc4c3e87eb
Move more things into q65 module.
2021-01-13 10:44:19 -05:00
Joe Taylor
71385aa20a
Move some variables into the q65 module.
2021-01-13 10:23:38 -05:00
Joe Taylor
daed54db2d
Remove unused routines q65_avg() and q65_avg2().
2021-01-13 09:52:00 -05:00
Joe Taylor
304ca4a55d
Move some routines into the module q65.f90.
2021-01-13 09:46:14 -05:00
Joe Taylor
98a52accbb
More refactoring of Q65 decoder.
2021-01-12 15:42:24 -05:00
Joe Taylor
c9ce452500
Code cleanup.
2021-01-12 14:42:00 -05:00
Joe Taylor
60a053aa94
Working toward some new, separate, Q65 subroutines.
2021-01-12 14:34:41 -05:00
Joe Taylor
a75037d053
Accumulate the symbol spectra s1() in array s1a().
2021-01-12 13:41:39 -05:00
Joe Taylor
63beab393b
Compute s1() in a separate subroutine, q65_symspec.f90.
2021-01-12 11:39:26 -05:00
Joe Taylor
d25e188dca
Code cleanup.
2021-01-12 11:28:46 -05:00
Joe Taylor
ef478717ea
Don't forget to do something about nsmo = ??.
2021-01-12 08:18:17 -05:00
Bill Somerville
b741eb761e
Implement the promised wsprd default data directory if accessible
2021-01-12 01:04:15 +00:00
Joe Taylor
cc2ca0f7e7
Fix an "off by one" times mode_q65 error, and some code cleanup.
2021-01-11 15:09:47 -05:00
Joe Taylor
fe1aefe93a
More code cleanup for module q65.f90.
2021-01-10 16:30:07 -05:00
Joe Taylor
e8ba69099a
Re-organize module q65.f90. Can still be improved!
2021-01-09 19:58:34 -05:00
Joe Taylor
c3010f1d14
Revert "Revert "Improve the trace behavior of timer().""
...
This reverts commit 7f4876cee0
2021-01-09 18:41:41 -05:00
Joe Taylor
7f4876cee0
Revert "Improve the trace behavior of timer()."
...
This reverts commit d60a97634b
2021-01-09 16:35:04 -05:00
Joe Taylor
d60a97634b
Improve the trace behavior of timer().
2021-01-09 15:03:41 -05:00
Joe Taylor
146ca19b97
Add some additional calls to timer().
2021-01-09 11:02:54 -05:00
Joe Taylor
57b6b2dca1
Set the "b90" search range once (in q65_decocd.f90) and share valies through q65.mod.
2021-01-08 09:42:07 -05:00
Joe Taylor
3b54196206
Remove two disused lines of code.
2021-01-07 13:37:12 -05:00
k9an
b21477b3ba
Fix a compiler warning.
2021-01-07 11:38:59 -06:00
Joe Taylor
f003ae653c
Silence compiler warning.
2021-01-07 12:00:11 -05:00
Steven Franke
353edc4718
Fix one more compiler warning.
2021-01-07 10:18:38 -06:00
Joe Taylor
5b0975bf45
Correct several flaws in message averaging. Still may want to handle MAXAVE better?
2021-01-07 11:13:43 -05:00
Steven Franke
b9d33bc998
Address compiler warnings in fst4/w code.
2021-01-07 10:05:53 -06:00
Joe Taylor
2194f3096a
Don't count lines with blank message in "ndecoded".
2021-01-06 21:44:49 -05:00
Joe Taylor
bc8d134135
Silence several compiler warnings.
2021-01-06 12:44:49 -05:00
Joe Taylor
aee0a1e851
Silence a compiler warning.
2021-01-06 10:58:25 -05:00
Bill Somerville
c7f2be4ba7
Initialize a variable
2021-01-06 15:49:51 +00:00
Bill Somerville
c407bc00f9
Revert "Mostly(?) temporary diagnostic tests."
...
This reverts commit fb6fcdf35e
2021-01-06 15:48:21 +00:00
Bill Somerville
9b35eeaead
Revert "Add s1 to the diagnostic output."
...
This reverts commit 5fe0bd3508
2021-01-06 15:48:07 +00:00
Joe Taylor
5fe0bd3508
Add s1 to the diagnostic output.
2021-01-06 10:30:05 -05:00
Joe Taylor
fb6fcdf35e
Mostly(?) temporary diagnostic tests.
2021-01-06 10:24:08 -05:00
Joe Taylor
47c8286db8
Disallow Q65 decodes with sum(dat4)=0: all 78 bita are zero.
2021-01-05 19:45:00 -05:00
Joe Taylor
4fb90e336e
Better orange sync curve. Clear message averaging after a successful decode.
2021-01-05 11:30:22 -05:00
Joe Taylor
f82356e199
q65sim: nonzero step size ==> Doppler tracking; otherwise, linear drift.
2021-01-05 10:42:19 -05:00
Joe Taylor
b8bd745816
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280
2021-01-05 09:53:54 -05:00
Joe Taylor
ea271152b8
Implement "orange sync curve", useful for multi-signal situation.
2021-01-04 14:38:02 -05:00
Bill Somerville
f2e9c1d91d
Merge branch 'develop' into feat-fst280
2021-01-04 15:53:21 +00:00
Bill Somerville
94977df845
Merge branch 'release-2.3.0' into develop
2021-01-04 15:38:06 +00:00
Bill Somerville
607a346cf1
Add new function needed for FST4W decoder updates
2021-01-04 15:35:32 +00:00
Steven Franke
0013b15120
Remove some debug code.
2021-01-04 15:00:05 +00:00
Steven Franke
46222c61ed
Add rudimentary sanity checks to the values parsed from FST4W_ALSO_FST4.
2021-01-04 15:00:05 +00:00
Steven Franke
41f587c240
Fix a conflict between noise baseline percentile level and noise blanker percentage. Both were using the npct variable. Add an option for an FST4 pass when in FST4W mode.
2021-01-04 15:00:05 +00:00
Steven Franke
0fef0cc6e6
Minor formatting change in fst4_decodes.dat.
2021-01-04 15:00:04 +00:00
Steven Franke
a38b48d13d
Minor format change for nutc in fst4_decodes.dat.
2021-01-04 15:00:04 +00:00
Steven Franke
a657ce29a7
FT8: Make nagain work.
2021-01-04 15:00:04 +00:00
Steven Franke
41297e8761
FT8: Commit the rest of the fix for the nagain crash.
2021-01-04 15:00:04 +00:00
Steven Franke
b51bda4806
FT8: Fix jt9 crash when nagain is invoked.
2021-01-04 15:00:04 +00:00
Steven Franke
4081be94e1
Avoid a possible of bounds error. Compute some more decode diagnostic data.
2021-01-04 15:00:03 +00:00
Steven Franke
fb7b751e6d
Remove hmod from command line parameters for fst4sim.
2021-01-04 15:00:03 +00:00
Steven Franke
701d517e6e
For fst4sim, use Lorentzian fading spectrum when fspread is negative.
2021-01-04 15:00:03 +00:00
Steven Franke
b087328fc1
Don't waste time on excess BP iterations when doing K=50. Decode a little deeper.
2021-01-04 15:00:03 +00:00
Steven Franke
8079d35561
Append decoder data to file fst4_decodes.dat instead of overwriting.
2021-01-04 15:00:02 +00:00
Steven Franke
89cbd177df
If file decdata is present in the data directory, then write detailed decoder data to file fst4_decodes.dat in the same directory.
2021-01-04 15:00:02 +00:00
Steven Franke
812bd29e54
FST4W: Use K=66 for first OSD decode attempt and for updating fst4w_calls.txt. Use K=50 for 2nd attempt.
2021-01-04 15:00:02 +00:00
Steven Franke
fc3e24f696
More work on K=50 decoding.
2021-01-04 15:00:01 +00:00
Steven Franke
65ff3ce05e
Remove some debug prints.
2021-01-04 15:00:01 +00:00
Steven Franke
11b7aa9429
Implements decoding of FST4W messages as (240,50) crc-less codewords.
...
By cascading the full 24-bit crc generator matrix with the (240,74) LDPC code generator, create a (240,50) generator that is used to decode with approximately 1 dB better sensitivity than the (240,64) with 14-bit CRC approach that is normally used. This approach treats the CRC bits as additional parity bits and provides no means for identifying incorrect codewords. All codewords on the list generated by the OSD algorithm have CRCs that match the CRC of the message payload. Codewords are validated by unpacking the message and comparing the unpacked message with the list of stored callsign/grid pairs stored in the fst4w_calls.txt file.
2021-01-04 14:59:56 +00:00
Joe Taylor
662a43d3dd
Corrections to the frequency-drift feature in q65sim.
2021-01-04 09:07:03 -05:00
Joe Taylor
6074e4e3af
Options for introducing frequency drift and frequency steps (e.g. 10 Hz) in Q65 simulator.
2021-01-03 11:19:39 -05:00
Joe Taylor
a02cbabb99
Fix an off-by-1 bug introduced in the previous commit.
2021-01-03 11:18:14 -05:00
Joe Taylor
04b22ce250
Preparing to add solution for frequendy drift to q65_sync.f90.
2021-01-02 14:21:14 -05:00
Joe Taylor
bc58604d42
Allow optional frequency drift of simulated Q65 signals.
2021-01-02 13:09:47 -05:00
Joe Taylor
e5a8e80c49
Minor tweaks to Q^% decoding scheme.
2021-01-01 15:28:41 -05:00
Joe Taylor
6b351165f2
Re-introduce Q65 timer calls. Extend red sync baseline to minimum +/- 100 Hz.
2021-01-01 10:47:22 -05:00
Joe Taylor
8a4b5b6a40
Various tweaks to the Q65 decoder; new numbering of the end-of-line decoding flags.
2020-12-31 15:52:06 -05:00
Joe Taylor
bcbca02c08
Enforce Q65 ClrAvg action when requested. Tweak somne logic.
2020-12-30 16:12:02 -05:00
Joe Taylor
e07ba410c2
Fix a problem with access to apsym0() array.
2020-12-30 15:40:06 -05:00
Joe Taylor
5d7b5f83e2
Fix several more flaws in the way Q65 decodes are presented.
2020-12-30 15:05:02 -05:00
Joe Taylor
77a0e01b05
Allow for all AP types when averaging Q65, and for navg > 9.
2020-12-30 12:10:03 -05:00
Joe Taylor
91687c573b
Fix the reporting of SNR for Q65 average decodes.
2020-12-30 11:02:49 -05:00
Joe Taylor
412422db17
Add 'q' to the Q65 end-of-line flags; label right text window for "Average decodes".
2020-12-30 10:42:27 -05:00
Joe Taylor
d81c01d23d
Remove unneeded arguments from calls to q65_avg and q65_avg2.
2020-12-30 09:07:41 -05:00
Joe Taylor
057967a761
For Q65 nsg averaging, wrap nsave when it reaches MAXAVE.
2020-12-30 08:44:56 -05:00
Joe Taylor
b6d2002985
Q65 decoder mostly working now with all (A B C D) decoding types.
2020-12-29 16:41:48 -05:00
Joe Taylor
520a0c7cc0
Work in progress for Q65 decoder.
2020-12-28 18:53:13 -05:00
Joe Taylor
62074ab58f
Much reworking of Q65 decoder. Have temporarily enabled all types of decoding passes.
2020-12-28 15:27:10 -05:00
Joe Taylor
30ab29d9e3
Work in progress, with lots of diagnostics. Do not use on the air!
2020-12-27 15:27:26 -05:00
Joe Taylor
48297e068b
More work in ptogress ...
2020-12-27 14:14:10 -05:00
Joe Taylor
d246a23948
Work in progress on message averaging: save current status.
2020-12-27 11:35:55 -05:00
Joe Taylor
5c805dfb39
another realignment of red sync curve and convention for f0.
2020-12-27 10:35:04 -05:00
Joe Taylor
c8ace441f9
New files for Q65 message averaging.
2020-12-26 10:08:53 -05:00
Joe Taylor
3d042ee56f
Work in progress, on Q65 message averaging.
2020-12-26 10:04:17 -05:00
Joe Taylor
d5957f51f9
Insert some (commented out) diagnostics.
2020-12-24 13:07:29 -05:00
Joe Taylor
171e466389
More work on Q65 message averaging.
2020-12-24 09:51:02 -05:00
Joe Taylor
844930fe75
Correct the frequency alignment of red sync curve.
2020-12-23 11:03:09 -05:00
Joe Taylor
c5a0de6210
Partial implementation of Q65 message averaging.
2020-12-23 09:47:11 -05:00
Joe Taylor
008cb37c16
Update test_q65 for having removed the T/F sync flag from q65sim command line.
2020-12-22 13:41:40 -05:00
Joe Taylor
408ac7bd0d
Correct the reported f0 for Q65 signals. It was off by one tone spacing.
2020-12-22 13:21:31 -05:00
Joe Taylor
cac6577127
Extend the DT range for 30 s Q65 submodes to include EME delays.
2020-12-22 09:43:25 -05:00
Joe Taylor
83c917ac57
Don't allow previous values of DT, f0 to be displayed with a no-decode.
2020-12-21 15:59:33 -05:00
Joe Taylor
044aa80dc4
Remove all vestiges of the QRA64 mode. It has been replaced by Q65.
2020-12-21 15:07:53 -05:00
Joe Taylor
36a089de21
Remove the sync-test option from q65sim.f90.
2020-12-21 13:42:03 -05:00
Joe Taylor
44516dbbc1
Make the Q65 red sync curve at least 21 tone-spacings wide, even if FTol is smaller.
2020-12-21 13:33:54 -05:00
