mirror of
https://github.com/saitohirga/WSJT-X.git
synced 2024-11-22 12:23:37 -05:00
065483e283
14 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Bill Somerville
|
4a32b0bef6 |
Add facility to disallow CAT commands while transmitting.
Some rigs either do not honour some CAT commands while transmitting or interpret them incorrectly. To deal with this a settings option to allow TX frequency changes while transmitting has been added with a default value of off. Any UI actions that directly or indirectly change the TX frequency are guarded according to this new option. As well as this band changes and use of the +2kHz check box are disabled and guarded respectively in transmit mode. Mode changes via the menu are now disabled while transmitting. When TX frequency changes are allowed; frequency changes are correctly implemented while in tune mode. Double clicking decodes while transmitting now correctly regenerate and change the message sent on the fly. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4349 ab8295b8-cf94-4d9e-aec4-7959e3be5d79 |
||
|
Bill Somerville
|
6689558be8 |
Make CW envelope shapng the default.
Now I have verified that the CW envelope shaping considerably reduces the bandwidth of teh CW id. I have made the it default. It can still be turned off via a CMake option if desired. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4013 ab8295b8-cf94-4d9e-aec4-7959e3be5d79 |
||
|
Bill Somerville
|
fc1713e9bf |
Simplify MainWindows to Modulator communications.
No longer any need to have a mute mechanism since the TX shutdown mechanism is sufficient. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4012 ab8295b8-cf94-4d9e-aec4-7959e3be5d79 |
||
|
Bill Somerville
|
ce0402941f |
Pass JT9W tone spacing to Modulator via a signal/slot as it is
crossing a thread boundary. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3995 ab8295b8-cf94-4d9e-aec4-7959e3be5d79 |
||
|
Bill Somerville
|
a24a05fc5a |
Clean up Modulator code to ensure that partial blocks written are sent
with the correct length. This was causng some CW identifications to be delayed and truncated occasionally. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3994 ab8295b8-cf94-4d9e-aec4-7959e3be5d79 |
||
|
Bill Somerville
|
f076c37c19 |
Made the soft keying CW wave shaper a CMake option (off by
default). Reorganized Modulator interface so that it can control the stream it writes to. Make sure only QAudioOutput::stop is called at the end of sending rather than QAudioOutput::reset which discards pending samples. Added a quick close option to the Modulator::stop slot to discard pending buffers if required. Fix issue in CW synthesizer that was causing CW to be inverted occasionally. Made global arrays of symbols volatile because compiler waa optimizing away reads in sound thread. These global variables must go eventually as they are a multi-threading hazard. Simplified TX sequencing to remove some duplicate signals. Increased range of TX attenuator from 10dB to 30dB. This is mainly for non-Windows platforms where the attenuator isn't linearized correctly. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3985 ab8295b8-cf94-4d9e-aec4-7959e3be5d79 |
||
|
Bill Somerville
|
581691befb |
Rearranged sequencing of audio streams and devices.
The code was starting streams linked to closed devices which may be causing issues on the Mac version. I have refactored to ensure that devices are always opened before related audio streams are started. Made .h C++ headers emacs friendly. Removed some code in the MainWindow contructor that read the log file but failed to check if the file exists and didn't do anything with the data anyway. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3977 ab8295b8-cf94-4d9e-aec4-7959e3be5d79 |
||
|
Bill Somerville
|
9247e10115 |
Added support for use of "Standard" locations for writable files.
This allows writable files to be located in the "correct"
location for each platform rather than in the directory of
the executable which, in general, is not recommended or
allowed in some cases.
A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to
switch be tween old and new functionality, currently it is on
by default. It can be turned off by defining it to a false
value (0) or more simply with cmake-gui setting the option
with the same name. JTAlert can only work with the old
non-standard file locations until Laurie VK3AMA chooses to
support the new file locations.
Even if the above is not enabled; the QSettings file is
written to a user specific location so it will be shared by
all instances of the program (i.e. across upgrades). See
below for multiple concurrent instance support changes.
Added a command line parser module for Fortran.
Added 'lib/options.f90' to facilitate more complex argument
passing to jt9 to cover explicit file locations.
Changed the way multiple concurrent instances are handled.
This is to allow the program to be run multiple times from
the same installation directory.
A new wsjtx command line optional argument is available "-r"
or "--rig" which enables multiple concurrent instance
support. The parameter of the new option is a unique name
signifying a rig or equivalent. The name is used as the
shared memory segment key and in window titles. The name is
also used to access unique settings files and writable data
files like ALL.TXT and log files. No attempt has been made
to share these files between concurrent instances.
If "-r" or "--rig" is used without a parameter it still
enables multiple concurrent instance support for that
instance. All instances must use a unique parameter, one of
which may be empty.
The rig name is appended the
QCoreApplication::applicationName() for convenient usage like
window titles.
Set non Qt locale to "C".
This ensures that C library functions give consistent results
whatever the system locale is set to. QApplication follows
the system locale as before. Thus using QApplication and its
descendants like widgets and QString for all user visible
formating will give correct l10n and using C/C++ library will
give consistent formatting across locales.
Added top level C++ exception handling to main.cpp.
Because the new transceiver framework uses exceptions
internally, the main function now handles any exceptions that
aren't caught.
Retired devsetup, replaced with Configuration.
Configuration is a class that encapsulates most of the
configuration behavior. Because rig configuration is so
closely coupled with rig operation, Configuration serves as a
proxy for access to the rig control functions. See
Configuration.hpp for more details of the Configuration
interface.
Menu changes.
Various checkable menu actions moved from main menu to the
Configuration dialog. The whole settings menu has been
retired with the single "Settings..." action moved to the
file menu for consistency on Mac where it appears as
"Preferences" in line with Mac guidelines.
New data models for data used by the application.
ADIF amateur band parameters, free text message macros, spot
working frequencies and, station information (station
descriptions and transverter offsets per band) each implement
the QAbstractItemModel interface allowing them to be used
directly with Qt view widgets (Bands.hpp, FrequencyList.hpp
and, StationList.hpp). Configuration manages maintenance of
an instance of all but the former of the above models. The
ADIF band model is owned by Configuration but requires no
user maintenance as it is immutable.
Band combo box gets more functionality.
This widget is now an editable QComboBox with some extra
input capabilities.
The popup list is still the list of spot working frequencies,
now showing the actual frequency decorated with the band
name. This allows multiple spot frequencies on a band if
required.
The line edit allows direct frequency entry in mega-Hertz
with a completer built in to suggest the available spot
working frequencies. It also allows band name entry where
the first available spot working frequency is selected.
Recognized band names are those that are defined by the ADIF
specification and can be found in in the implementation of
the ADIF bands model (Bands.cpp).
If an out of band frequency is chosen, the line edit shows a
warning red background and the text "OOB". Out of band is
only defined by the ADIF band limits which in general are
wider than any entities regulations.
Qt 5.2 now supports default audio i/p and o/p devices.
These devices are placeholders for whatever the user defines
as the default device. Because of this they need special
treatment as the actual device used is chosen at open time
behind the scenes.
Close-down behavior is simplified.
The close-down semantics were broken such that some objects
were not being shut down cleanly, this required amendments to
facilitate correct close down of threads.
User font selection added to Configuration UI.
Buttons to set the application font and the font for the band
and Rx frequency activity widgets have been added to the
Configuration UI to replace the file based font size control.
Free text macros now selected directly.
The free text line edit widgets are now editable combo boxes
that have the current free text macro definitions as their
popup list. The old context menu to do this has been
retired.
Astronomical data window dynamically formatted and has font a chooser.
This window is now autonomous, has its own font chooser and,
dynamically resizes to cover the contents.
Double click to Tx enabled now has its own widget in the status bar.
QDir used for portable path and file name handling throughout.
The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now
checkable.
Being checkable allows these buttons control their own state
and rendering.
Calls to PSK Reporter interface simplified.
In mainwindow.cpp the calls to this interface are
rationalized to just 3 locations.
Manipulation of ALL.TXT simplified.
Moved, where possible, to common functions.
Elevated frequency types to be Qt types.
Frequency and FrequencyDelta defined as Qt types in their
meta-type system (Radio.hpp). They are integral types for
maximum accuracy.
Re-factored rig control calls in mainwindow.cpp.
The new Configuration proxy access to rig control required
many changes (mostly simplifications) to the MainWindow rig
control code. Some common code has been gathered in member
functions like qsy(), monitor(), band_changed() and
auto_tx_mode().
Rig control enhancements.
The rig control for clients interface is declared as an
abstract interface (See Transceiver.hpp). Concrete
implementations of this interface are provided for the Hamlib
rig control library, DX Lab Suite Commander via a TCP/IP
command channel, Ham Radio Deluxe also via a TCP/IP command
channel and, OmniRig via its Windows COM server interface.
Concrete Transceiver implementations are expected to be moved
to a separate thread after construction since many operations
are blocking and not suitable for running in a GUI thread.
To facilitate this all instantiation of concrete Transceiver
instances are handled by Configuration using a factory class
(TransceiverFactory) for configuration parameter based
instantiation.
Various common functionality shared by different rig
interface implementations are factored out into helper base
classes that implement or delegate parts of the Transceiver
interface. They are TransceiverBase which caches state to
minimize expensive rig commands, it also maps the Transceiver
interface into a more convenient form for implementation
(template methods). PollingTransceiver that provides a state
polling mechanism that only reports actual changes.
EmulateSplitTransceiver that provides split operation by
QSYing on PTT state changes.
EmulateSplitTransceiver can be used with any implementation
as it follows the GoF Decorator pattern and can wrap any
Transceiver implementation.
OmniRigTransceiver is derived directly from TransceiverBase
since it doesn't require polling due to its asynchronous
nature. OmniRigTransceiver is only built on Windows as it is
a COM server client. To build it you must first install the
OmniRig client on the development machine
(http://www.dxatlas.com/omnirig/).
DXLabSuiteCommanderTransceiver derives from
PollingTransceiver since it is a synchronous communications
channel. No third party library is required for this
interface.
HRDTransceiver also derives from PollingTransceiver. The HRD
interface library has been reverse engineered to provide
functionality with all available versions of HRD. No third
party libraries are required.
HamlibTransceiver likewise derives from PollingTransceiver
since the Hamlib asynchronous interface is non-functional.
Although this class will interface with the release version
of Hamlib (1.2.15.3); for correct operation on most rigs it
needs to run with the latest master branch code of Hamlib.
During development many changes to Hamlib have been submitted
and accepted, hence this requirement. Hamlib source can be
obtained from git://git.code.sf.net/p/hamlib/code and at the
time of writing he master branch was at SHA 6e4432.
The Hamlib interface directly calls the "C" interface and the
modified rigclass.{h,cpp} files have been retired.
There is a rig type selection of "None" which may be used for
non-CAT rigs, this is actually a connection to the dummy
Hamlib device.
PollingTransvceiver derives from TransceiverBase and
TransceiverBase derives from the Transceiver interface.
Each interface implementation offers some possibility of PTT
control via a different serial port than the CAT port. We
also support PTT control directly via a second serial port.
This is done by delegating to a dummy Hamlib instance which
is only used for PTT control. This means that
DXLabSuiteCommanderTransceiver, HRDTransceiver and
OmniRigTransceiver always wrap a dummy HamlibTransceiver
instance. The factory class TransceiverFactory manages all
these constructional complexities.
Serial port selection combo boxes are now editable with a
manually entered value being saved to the settings file.
This allows a non-standard port device to be used without
having to edit the settings file manually.
For TCP/IP network CAT interfaces; the network address and
port may be specified allowing the target device to be
located on a different machine from the one running wsjtx if
required. The default used when the address field is left
blank is the correct one for normal usage on the local host.
Selecting a polling interval of zero is no longer possible,
this is because the rig control capability can no longer
support one way connection. This is in line with most other
CAT control software.
In the Configuration dialog there are options to select split
mode control by the software and mode control by the
software. For the former "None", "Rig" and "Fake it" are
available, for the latter "None", "USB" and, "Data" are
available. Because tone generation is implicitly linked to
split mode operation; it is no longer possible to have the
software in split mode and the rig not or vice versa. This
may mean some rigs cannot be used in split mode and therefore
not in dual JT65+JT9 until issues with CAT control with that
rig are resolved. Single mode with VOX keying and no CAT
control are still possible so even the most basic transceiver
setup is supported as before.
Configuration now supports a frequency offset suitable for
transverter operation. The station details model
(StationList.hpp) includes a column to store an offset for
each band if required.
CMake build script improvements.
The CMakeLists.txt from the 'lib' directory has been retired
with its contents merged into the top level CMakeLists.txt.
Install target support has been greatly improved with the
Release build configuration now building a fully standalone
installation on Mac and Windows. The Debug configuration
still builds an installation that has environment
dependencies for external libraries, which is desirable for
testing and debugging.
Package target support is largely complete for Mac, Windows
and, Linux, it should be possible to build release installers
directly from CMake/CPack.
Cmake FindXXXX.cmake modules have been added to improve the
location of fftw-3 and Hamlib packages.
Version numbers are now stored in Versions.cmake and work in
concert with automatic svn revision lookup during build. The
version string becomes 'rlocal'± if there are any uncommitted
changes in the build source tree.
Moved resource like files to Qt resources.
Because location of resource files (when they cannot go into
the installation directory because of packaging rules) is
hard to standardize. I have used the Qt resource system for
all ancillary data files. Some like kvasd.dat are dumped out
to the temp (working directory) because they are accessed by
an external program, others like the audio samples are copied
out so they appear in the data directory under the default
save directory.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
|
||
Joe Taylor
|
86591544f0 |
Merge changes from branches/wsjtx_w back into branches/wsjtx.
Note to developers: Not sure about the makefiles... git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3835 ab8295b8-cf94-4d9e-aec4-7959e3be5d79 |
||
|
Joe Taylor
|
aec23086dc |
Attempting to trace the occasional crashes seen by a few users.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3620 ab8295b8-cf94-4d9e-aec4-7959e3be5d79 |
||
|
Bill Somerville
|
4f4c535c4e |
Added audio channel support.
Audio input can be mono, left of stereo pair or, right of stereo pair. Audio output can be mono, left of stereo pair, right of stereo pair or, both of stereo pair (the same output goes to both channels in both mode). Settings are remembered between sessions. Stream channel suport is implemented mainly in the new AudioDevice class which is now the base class of Modulator and Detector. Audio channels are selected on the configuration screen. Only supported channel configurations per device can be selected. Audio output volume (actually attenuation) is now possible from the GUI. I have added a slider control to the main window; I don't necessarily propose this as a final release location for the widget as I understand that changes to the main screen are sensitive. This location is just a starting suggestion for a trial. The volume (attenuation) setting is remembered between sessions and is not device dependent. This addresses all issues of volume setting on *nix versions since there is no need to use pavucontrol to set audio levels. The volume (attenuation) action is logarithmic. Shaped CW keying has been implemented in Modulator although it is currently disabled as I am not 100% happy wth the implementation. If you want to try it define the C++ preprocessor macro WSJT_SOFT_KEYING in your build. The Modulator instance has been moved to the same thread as the SoundOutput instance as it should have been since the output callback already operates in that thread. Cross thread slots are now correctly called in a thread safe way as a result. A number of files where in the SVN repository with DOS line endings which I have removed. SVN users on Windows need set the config for native line endings so that DOS line endings are automatically stripped on checkin. The DevSetup class now holds it's UI o the heap to reduce imapact on build dependencies. The application settings are now passed to objects from the main.cpp file. Management of settings are moved to the responsible classes (top level windows). This has involved a few settings moving groups so users will see some settings reverting to default values on the first run of an update. Persistance of top level windows geometry and position is now handled in the recommened manner (constructor for load, closeEvent for store in modal windows and, hideEvent for store in modeless dialogs). The MainWindow class now holds its children as members rather than global variables. The LogQSO class now hides its implementation and takes responsibility for its own settings and widows rendering parameters. A new settings file group is implemented to persist the LogQSO class settings. The WideGraph class now hides its implementation and manages its own settings and window rendering parameters. --This line, and those below, will be ignored-- M Modulator.cpp M rigclass.cpp M widegraph.cpp M signalmeter.cpp M soundin.cpp M soundout.cpp M mainwindow.h M main.cpp M meterwidget.h M devsetup.cpp M mainwindow.ui M Detector.cpp M logqso.h M rigclass.h M mainwindow.cpp M meterwidget.cpp M soundin.h M devsetup.ui M wsjtx.pro M devsetup.h M logqso.cpp M Modulator.hpp M psk_reporter.cpp M killbyname.cpp M Detector.hpp M signalmeter.h M widegraph.h M psk_reporter.h M soundout.h M PSKReporter.h M lib/afc65b.f90 M lib/gran.c M lib/usleep.c M lib/afc9.f90 M lib/wrapkarn.c A AudioDevice.hpp git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3542 ab8295b8-cf94-4d9e-aec4-7959e3be5d79 |
||
|
Joe Taylor
|
a114b8c9ea |
1. Capitalize names of palettes appropriately.
2. Remove (or comment out) most qDebug() statements. 3. Swap positions of labels 2 and 3 on status bar. 4. In "Split Tx" mode, transmit audio always between 1500 and 2000 Hz. 5. Rearrange positions of WideGraph controls. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3535 ab8295b8-cf94-4d9e-aec4-7959e3be5d79 |
||
|
Bill Somerville
|
ef586e4b58 |
Qt 5 Audio replaces PortAudio.
Currently only Qt5 or above is known to work with this code. It may be possible to backport it to Qt4 if required. Audio output goes back to a separate thread to try and minimize stutters in streaming on Windows particularly. A crash on Linux due to mishandling of stereo audio output has been fixed and both left and right channels are now correctly synthesised with identical contents. Rigs are enumerated directly from hamlib API rather than running a sub process reading output of rigctl -l. This was initially done to get rid of some GUI thread blocking in the configuration dialog, but is generally a better way of doing it anyway. Some refactoring in MainWindow to accomodate the audio streaming, modulation and detecting classes. Exit handling for application refactored to use signals rather than brute force event loop exit. This was required to get correct thread shutdown semantics. The GUI update timer is now stopped during application shutdown which is necessary to stop crashes when shutting down gracefully with signals and window close() calls. There is an outstanding issue with Linux audio streams; the QAudio Input/Output classes create a new stream name each time a stream is started. This doesn't play well with PulseAudio utilities such as pavucontrol to set stream volume as settings are lost every tx period. I have tried to keep a single stream for all output but there are problems restarting it that haven't been resolved yet. The QtCreator project file has been rearranged a little because it passes all the object files to the linker rather than using an archive library. Since the GNU linker is single pass; the object files need to be in a logical order with definitions appearing afer references to them. This was required to avoid a linking error. The lib/Makefile.linux has been enhanced to use the fortran compiler to locate the correct version of the Fortran library to use. This is necessary on the latest Linux distros because the unversioned symlink to compiler support libraries is no longer provided. This only an issue with mixed programming language links where the linker driver for one language has to link support libraraies for another language. git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3532 ab8295b8-cf94-4d9e-aec4-7959e3be5d79 |
||
|
Joe Taylor
|
324169661e |
Forgot to include four files.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3526 ab8295b8-cf94-4d9e-aec4-7959e3be5d79 |