Steven Franke
1b9f043087
Make frequency search more efficient in msk144 realtime decoder.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7111 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-25 20:37:30 +00:00
Steven Franke
c05cf2438d
Make msk144spd properly track the RxFreq spinbox.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7110 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-25 12:53:07 +00:00
Steven Franke
68951558d4
MSK144:
...
1. Clean up mskrtd to remove unused variables.
2. Re-instate Rx frequency spinbox in MSK144 mode to allow decoding of off-frequency signals with small FTol. Make changes needed to pass Rx Freq in to fortran routines.
3. Enable realtime decoder for testing. Auto sequence does not yet work when realtime decoding is enabled. There are probably other bugs as well.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7109 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-25 00:16:29 +00:00
Steven Franke
5b5915a024
New short ping decoding algorithm for msk144 realtime decoder. Not yet enabled.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7108 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-23 22:28:11 +00:00
Steven Franke
665b8dc85a
More work on real-time decoder for msk144.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7107 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-22 19:42:05 +00:00
Steven Franke
ed6620f424
Add new routines associated with msk144 real-time decoder.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7106 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-22 00:04:43 +00:00
Steven Franke
97ff11f635
More work on real time decoder.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7105 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-22 00:03:44 +00:00
Steven Franke
07ceefb8a4
Fix what I broke.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7104 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-20 22:51:06 +00:00
Steven Franke
4684df897c
Remove diagnostic write.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7103 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-20 20:47:29 +00:00
Steven Franke
7979794933
Add new routines to CMakeLists.txt.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7102 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-20 20:24:03 +00:00
Steven Franke
940df9d3a7
Add command-line routine to test real time msk144 decoding.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7101 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-20 20:22:48 +00:00
Steven Franke
3ceeb73fd6
Move decoding of synced frame into a subroutine.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7100 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-20 20:21:24 +00:00
Joe Taylor
e3f1eb82f6
Temporarily disable the cbRealTime checkbox.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7099 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-20 16:37:39 +00:00
Joe Taylor
caf9e18409
Add real-time decode routine.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7098 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-20 16:35:00 +00:00
Joe Taylor
fe98777cfe
Implement real-time decoding in MSK144 mode, for testing.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7097 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-20 16:25:25 +00:00
Joe Taylor
8d38566225
Too much spectral smoothing? Omit call to smo121.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7096 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-18 15:34:15 +00:00
Steven Franke
46902eb42a
Decrease execution time of the most time-consuming loop in opdetmsk144.f90.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7095 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-17 22:59:21 +00:00
Steven Franke
8becb1defc
More work on opdetmsk144.f90 - clean up, generalize it a bit, and fix printed time estimate.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7094 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-17 21:22:00 +00:00
Joe Taylor
869b3df04a
Reconfigure mainwindow GUI properly after MSK144 -> WSPR -> MSK144.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7093 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-17 15:32:01 +00:00
Joe Taylor
7b144f2800
1. Display proper UTC on Fast Graph for files read from disk.
...
2. Move cursor DT readout to lower left of top panel.
3. More work on pick-decodes... but it's not yet fully working.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7092 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-17 13:34:40 +00:00
Steven Franke
d24eecf10a
Open up the range of record sizes that opdetmsk144 will accept.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7091 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-16 22:00:29 +00:00
Steven Franke
7b6f5475b7
Fix a bug in wspr callsign packing that affected wsprsim and signal subtraction for a subset of callsigns.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7090 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-16 19:38:18 +00:00
Joe Taylor
7a30d9f807
when TRperiod < 30 s, expand the Fast Graph scale so full width is 15 s.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7089 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-16 14:18:40 +00:00
Joe Taylor
3fc79f7f7a
Two decimal places in readout of cursor time.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7088 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-15 20:25:22 +00:00
Joe Taylor
9e105064a2
Temporarily (?) re-activate MSK144 click-to-decode from lower panel of Fast Graph.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7087 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-15 19:23:30 +00:00
Joe Taylor
f3ff1daf20
Display cursor location (in seconds) on the Fast Graph.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7086 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-15 18:37:44 +00:00
Joe Taylor
04ebbcf6b6
Remove a diagnostic print.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7085 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-15 17:09:00 +00:00
Joe Taylor
a850804fc1
Increase range of report spinbox in MSK144 to -8 --> +24 dB. Limit the yellow click-to-decode bar to max at TRperiod.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7084 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-15 17:06:49 +00:00
Steven Franke
b7b5518276
Limit frequency search to plus/minus ntol.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7083 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-14 22:29:15 +00:00
Steven Franke
a64cbc22e7
Enhance click-to-decode performance in MSK144.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7082 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-14 22:18:58 +00:00
Joe Taylor
231d9ce05c
More cleanup of spurious identifications of DXCC entities fron non-callsigns.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7081 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-14 16:19:21 +00:00
Joe Taylor
4a6b839434
Spinners fopr Rx Freq and Tx Freq should not have been made visible in MSK144 mode; they are ignored in this mode, as present.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7080 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-13 21:20:16 +00:00
Joe Taylor
b0511bacbd
Remove JTMSK mode and all related routines. Beware of possible unintended side effects!
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7079 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-13 17:52:45 +00:00
Joe Taylor
3a40e1ac77
Make Rx Freq and Tx Freq spinners visible in MSK144 mode. (Tx Freq is disabled.)
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7078 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-13 17:11:27 +00:00
Joe Taylor
6f2e800b61
Remove the arbitrary "-5 dB" from signal-meter readings.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7077 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-13 12:51:34 +00:00
Bill Somerville
b1b0f26026
Work around a compiler error message - hopefully
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7076 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-11 12:27:35 +00:00
Bill Somerville
698dee5e32
Add a configurations button to the rig error message box
...
This button pops up the same context menu as the configurations button
on the main window menu bar. This allows the operator to easily escape
from an incorrectly configured configuration without changing it.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7075 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-11 01:09:50 +00:00
Bill Somerville
ed60f43917
Tidy up the settings advanced tab layout and remove unnecessary elements
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7074 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-11 01:09:40 +00:00
Bill Somerville
cf705954a1
Make the splash screen less annoying with a permanent disable check box
...
The change also includes a new MultiSettings feature that allows
settings keys common to all configurations. The splash screen disable
is the first of those to be used.
The MultiSettings class has been made safer to use by ensuring it
saves and re-enables the current QSettings group when doing multi
settings actions. This allows access to common, across configuration,
items while within a normal settings group without breaking the
MultiSettings internal implementation.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7073 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-11 01:09:28 +00:00
Joe Taylor
f535f31310
Oops! Should always default to General tab.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7072 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-09 18:46:10 +00:00
Joe Taylor
fd148562d4
Correfct typo; add tool tip.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7071 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-09 18:41:52 +00:00
Joe Taylor
488a53d991
Add MSK144 "Contest mode" option to skip Tx2 and Tx3. Needs checking!
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7070 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-09 18:37:00 +00:00
Joe Taylor
a0ff0049c1
Fix a bug intruduced in r7060 that prevented reading .wav files in fast modes.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7069 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-09 17:46:09 +00:00
Joe Taylor
814f602f68
Fix the DXCC entity logic so that "CQ CT K1ABC" isn't flagged as "Portugal".
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7068 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-09 15:33:21 +00:00
Joe Taylor
baacbb3459
More tweaks to user Guide.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7067 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-08 20:30:12 +00:00
Joe Taylor
cfffe1dcbe
Update the CMakeLists.txt for User Guide.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7066 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-08 19:15:17 +00:00
Joe Taylor
1dc6db5f57
Minor tweaks to user Guide.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7065 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-08 19:03:29 +00:00
Joe Taylor
515eafb6a2
More updated to v1.7 User Guide.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7064 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-08 18:53:48 +00:00
Joe Taylor
f17a3f1d7f
Starting to update the WSJT-X User Guide for version 1.7. More to come!
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7063 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-08 17:04:18 +00:00
Joe Taylor
abdc8c9ec3
Don't show the Auto Seq checkbox when it's not relevant.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7062 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-08 12:54:09 +00:00