Commit Graph

79 Commits

Author SHA1 Message Date
Joe Taylor
926395561e Further optimizations of the decoders, and some code cleanup.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3492 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-07-17 19:13:36 +00:00
Joe Taylor
e26c53e253 1. Allow waterfall window to have smaller height.
2. Speed improvement in JT9 decoder.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3488 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-07-16 18:17:20 +00:00
Joe Taylor
e5f777b5ee Warning: these changes have not yet been thoroughly tested!
1. Correct the TxMode label on program startup.
2. Insert TxMode (not RxMode) into the "Transmitting..." lines in ALL.TXT.
3. Put TxMode in wsjtx_status.txt.
4. F4 clears Az, Dist, and all Tx messages as well as DxCall and DxGrid.
5. Make it possible to decode JT9 in the "JT65 region", and vice-versa, with
   directed double-click on signal in waterfall.
6. Improved logic for enabling/disabling TestPTT button on setup screen.
7. Do not call getFreq() when TestPTT is activated under CAT control.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3463 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-07-08 19:57:01 +00:00
Joe Taylor
8fb483a200 Merging code for v1.1 back into the main wsjtx branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3462 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-07-08 13:17:22 +00:00
Joe Taylor
1ada32a81e 1. De-activate submodes JT9-5, JT9-10, and JT9-30. (This makes the shared
memory region smaller by some 150 MB.)
2. Some code cleanup (removing unused lstrong, etc.)...


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3283 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-20 14:09:02 +00:00
Joe Taylor
083d85cb8a Preparing for more tests of JT9 decoder.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3282 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-17 19:35:29 +00:00
Joe Taylor
033795c6bc Removed red3, was not useful.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3280 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-17 15:16:29 +00:00
Joe Taylor
88ae46eb3a Diasble diagnostic writes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3278 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-17 01:35:36 +00:00
Joe Taylor
3cdf283c55 Reduce ntol.
Add "red3" (but not yet using it).


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3275 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-16 19:01:16 +00:00
Joe Taylor
6339dc4b7e Many changes to the procedures for selecting decodable candidate JT9 signals.
This code may be the new benchmark?


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3274 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-16 16:02:00 +00:00
Joe Taylor
25a6d337fe Remove diagnostic prints.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3272 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-15 19:13:31 +00:00
Joe Taylor
286a10b75f Another try at optimizing choices for decoding. Not done yet!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3271 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-15 19:03:49 +00:00
Joe Taylor
07edcb67e0 Added routine "chkss2" to test sync vector for sanity before attenpting
Fano decode.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3270 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-15 15:17:36 +00:00
Joe Taylor
8277e6ec7f More (temporary) adjustments to decode parameters.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3269 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-15 11:37:25 +00:00
Joe Taylor
fcd068b7c4 Move Tune button to right of "Halt Tx".
Tweak decoding parameters in sync9.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3268 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-14 22:47:32 +00:00
Joe Taylor
a0eb456a4f 1. Minor corrections to plotter.cpop and widegraph.cpp.
2. New algorithm for 'sync9'.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3267 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-14 17:42:25 +00:00
Joe Taylor
9ba06408b2 Temporary code, to aid with a series of tests of the JT9 decoder.
This commit will serve as a benchmark for comparison with new code to
be written.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3266 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-14 14:29:01 +00:00
Joe Taylor
8e2b9fbd5a Fix freq readout for JT9-2.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3258 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-05-07 12:29:22 +00:00
Joe Taylor
e6102f9ef2 Further code cleanup.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3199 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-22 15:43:02 +00:00
Joe Taylor
695ce7b83e General code clean-up to eliminate compiler warnings.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3198 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-22 15:08:20 +00:00
Joe Taylor
8feedd22a2 Removed the bi-directional CAT control: an unsuccessful experiment.
Removed an unhelpful change to decoder().


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3193 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-17 14:53:58 +00:00
Joe Taylor
d50ca6a077 Fine-tuning work on decoder.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3181 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-16 18:33:38 +00:00
Joe Taylor
dc4fb1f954 Bring standalone behavior of jt9(.exe) closer to that of its
behavior when using WSJT-X shared memory.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3176 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-16 16:25:14 +00:00
Joe Taylor
94645ac24c Fix problem with "Tune" at startup. status
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3174 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-15 23:42:42 +00:00
Joe Taylor
7bc09300eb Add instructional labels to Tab 2.
Reset m_repeatMsg=0 on Tx Halt, etc.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3171 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-15 16:06:22 +00:00
Joe Taylor
f88c0aad81 One more try at getting the decoded line lengths right. Should be
OK in Linux, too -- CHECK THIS -- and keeps the message string at 
length 22, as required for JT65.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3160 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-12 14:20:05 +00:00
Joe Taylor
fc65d318dd Max size of several widgets made larger to accommodate people who set
system fonts larger than the default.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3152 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-10 18:00:33 +00:00
Joe Taylor
d2d0583e5a 1. Fix end-of-transmission logic so that CW ID works again.
2. Much better logic for choosing frequencies at which to attempt decodes.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3143 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-09 20:59:53 +00:00
Joe Taylor
cd15a5e4d6 1. Click on spectrum sets Rx freq; double-click also invokes narrow-band
decoder at the new frequency.  CTRL-click (or CTRL-double-click) sets both 
Rx and Tx freqs.
2. Amplitude at end of transmission is ramped down to prevent a "key click".


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3139 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-09 15:16:34 +00:00
Joe Taylor
9ded5bf6af 1. Decode button does only the "quick decode" at QSO frequency.
2. Correct a logic error in new Tx-message-selection code.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3136 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-08 21:01:30 +00:00
Joe Taylor
a4f82521bd Correct a flaw in decoder(); do some code cleanup.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3127 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-03 20:42:12 +00:00
Joe Taylor
c23fd176b8 Implemented the "nqd=1,0,-1" logic for decoding.
Plot scale now marks the decoding range in blue, Rx freq range in green, 
and Tx frew range in red.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3126 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-03 20:21:00 +00:00
Joe Taylor
7f72925679 First try at changing Tol to fMin and fMax. More work still to be done!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3125 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-03 16:44:31 +00:00
Joe Taylor
461fdd79aa 1. Blank lines between decoding periods now optional.
2. "CQ DX" is now treated properly when the decoded line is double.clicked.
3. Displayed sync values reduced by 1/2.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3124 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-03 15:35:11 +00:00
Joe Taylor
a36155e316 Write all decodes to file 'decoded.txt'. Unlike ALL.TXT, this file is not
cumulative; each invocation of the decoder starts the file anew.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3118 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-02 13:49:52 +00:00
Joe Taylor
4544824f30 Another adjustment to the trade-off between decoding time and sensitivity.
If CTRL is held down when double-clicking on a decode, the QSO freq (
both Rx and Tx) will be reset even if the first decoded callsign is MyCall.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3109 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-03-26 15:59:23 +00:00
Joe Taylor
377339a185 Increase values of "limit" in decoder.f90.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3073 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-03-23 13:31:33 +00:00
Joe Taylor
71ca3fc1c0 LogQSO now has a confirmation step where you can edit the log entries.
Tx macros are now enabled.
Bug in decoder fixed.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3068 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-03-21 22:58:16 +00:00
Joe Taylor
53c6c15937 Fix minor bug in decoder.f90: should always try i==ipk!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3063 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-03-20 14:31:02 +00:00
Joe Taylor
f23a3ceab1 Big improvement in decoding speed.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3059 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-03-19 17:26:45 +00:00
Joe Taylor
a360a64275 Combining wsjtx_rx.log and wsjtx_tx.log into ALL.TXT.
Implementing ADIF log.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3050 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-03-18 16:14:18 +00:00
Joe Taylor
c51a3333d9 Change the displayed "drift" to FFT bins per transmission length.
Re-activate "killbyname" on program startup.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2782 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-28 15:09:50 +00:00
Joe Taylor
d183afd95a Tweak to minimize spurious sync values (from QRN ??).
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2778 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-27 20:49:33 +00:00
Joe Taylor
a7ea2745f2 Refactor the test9 routine into downsam9, peakdt9, symspec2, ...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2775 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-27 15:38:03 +00:00
Joe Taylor
7fe6ef1f61 Many changes: all-new JT9 decoder, supposedly faster and better.
Needs thorough testing, especially for drifting signals!


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2774 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-26 21:06:41 +00:00
Joe Taylor
725c6bcbc0 Enable "Save synced" and "Save Decoded".
Clean up handling of DialFreq.
Put Date into wsjtx_rx.log.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2768 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-24 15:18:17 +00:00
Joe Taylor
696fc34512 Save all files, then possibly remove after decoding finishes.
Some code cleanup; remove unused code.
Add sub-mode number to wsjtx_rx.log.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2767 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-24 14:36:45 +00:00
Joe Taylor
f715ea6347 Now working with decoding done in a separate process, jt9.exe.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2756 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-21 17:42:53 +00:00
Joe Taylor
a2f60d92dd Get rid of multiple decodes of same signal.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2754 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-20 00:48:41 +00:00
Joe Taylor
7f0ff9e46d Code cleanup.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2752 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-19 18:49:21 +00:00