compound callsigns, as required.
TO DO: Now that the fixed "short list" of common prefixes and suffixes
is compiled into the code, would be better to remove the requirement for
file prefixes.txt.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3679 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
"Type 1" or "Type 2" messages when a compound callsign is present.
This is not yet finished!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3677 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
* Main Page
- (3.3) Changed OS x DL links to "osx_" vs "osx-" in the ref links.
- Updated main page links. I think we should consider an include::file v.s
- line item listing, as the list is getting kinda long.
- Updated quick-reference guide
* (3.4) Added a section to wsjtx-main.adoc for Linux Compile form Source. This
needs work as I basically pulled the steps from my local build script. While it
works nicely in unattended mode, in an interactive shell, it's not very tidy as
there are too many steps.
* (3.4) Install Package list should be fairly accurate, Ive' tested it on several
new installs, without iussue, once I had the kvasd deps figured out.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3674 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
5. F7 now toggles the Setup menu item "Double-click on call sets
Tx Enable". Present state is written to Status Bar label 3.
The present commit updates the makefiles.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3673 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. Change "Appendix x" section headings to useful descriptions.
3. Add KB1ZMX and W4TI to the WSJT-X "About" screen and Acknowledgments
in the User's Guide. (Hope I didn't forget anyone -- please advise
if I did!)
4. A few more minor tweaks to User's Guide
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3672 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
bad data.
2. Fix a bug that could allow a Koetter-Vardy false decode instead of
a valid Berlekamp-Massey decode, sometimes leading to program crash.
3. Many more edits in the User's Guide, *.adoc files.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3664 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
applicable, JT65v2 otherwise. Thanks to DL9RDZ!
2. Fix a bug in flat3.f90, evident on OSX systems. Thanks to G4KLA!
3. The Makefile now copy the jt9code executable into the destination
directory for to-be-packaged executables.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3648 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Added code to flush any queued spots to PSKReporter prior to a band change. This should prevent spots being reported on a wrong band.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3647 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Add -DUNIX flag to FFLAGS in Makefile.linux.
Tweak the use of framesAfterDownsample in Detector.cpp.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3631 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Windows Vista has a broken rate converter which gets invoked when an
input audio stream at 48kHz sampel rate is requested. I've no idea why
our application can't get exclusive access to the audio input device
and have a unconverted stream direct at 48kHz.
To get around this our down sampling filter for audio input from 48kHz
to 12kHz is disaabled by default on Windows Vista, instead we request
a 12kHz stream and process it directly.
This default behviour can be overriden by specifying the following
settings value:
[Tune]
Audio\DisableInputResampling=false
This settings value defaults to true on Windows Vista and false
everywhere else so normally needn't be present.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3588 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The ".quit" file that is used to communicate shutdown to the "jt9"
sub-process was not getting deleted under some obscure
circumstances. If "wsjtx" is started with the ".quit" file in place;
"jt9" starts and stops immediately rather than going into it's normal
wait state. Probably some sort of race condition between the two
processes dying and file and/or shared memory locks.
Rather than track the issue down I have added code to ensure that
".quit" is removed before starting "jt9".
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3586 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The filter used for 4 times down-sampling cannot handle sample streams
where the hardware or drivers deliver chunks of data that are not
multiples of 4 frames long. This seems to be prevalent on some Linux
platforms. Also de-interleaving of single channel audio from stereo
streams was no longer supported.
I have changed the input strategy to de-interleave the incoming
sample stream into an intermediate buffer large enough to hold all the
samples required for a single unit of processing (one basic waterfall
interval) and apply the down-sampling filter to the whole intermediate
buffer just prior dispatch to the FFT generator.
This now means that we are now using the ubiquitous 48kHz hardware
sample rate for both input and output of audio across all platforms
and decoding a single channel of a stereo stream is again
supported. The down-sampling to 12kHz is done with a high quality FIR
49-tap low pass filter specifically designed by Joe (K1JT) for
operation in a 4kHz bandwidth.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3585 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. Removed commented code left over from previous edits in MainWindow::doubleClickOnCall()
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3584 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
48kHz to 12kHz down sampler routine.
Added assert to disallow stereo processing of i/p samples
until fil4.f90 can deal with interleaved stereo streams.
Added QProcess error to jt9 error handler, not that anything
is done with the error code yet but at least it can be examined
in the debugger if required.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3583 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Please note that I removed the option "-mno-stack-arg-probe" from CFLAGS.
Was there any good reason for it still being there?
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3582 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
By adding the following section to the initialisation file the audio buffer
sizes and audio thread priority may be adjusted.
[Tune]
Audio\InputBufferFrames=1200
Audio\OutputBufferMs=1000
Audio\ThreadPriority=4
The values above are the program defaults that will be used if the
initialisation parameters are omitted.
Thread prioritis are the QThread::Priority enumumeration values.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3576 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. Clear the "Name" field after logging a QSO.
3. Add fil4.f90, a subroutine for downsampling from 48000 Hz to 12000 Hz
sample rate. (Not yet incorporated in WSJT-X, but intended to be called
from arounf line 51 in Detector.cpp.)
4. Minor updates to User's Guide.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3570 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. The main window can be expanded wider to allow those with large screens to use larger fonts
3. New class DecodedText handles the formatted text from decoder.f90.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3564 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Change source URLs in teh CMake scripts for the kvasd binaries.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3563 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
