Joe Taylor
4b55c85c4b
Warning message in labDXped if contest mode is enabled in Q65 mode.
2021-03-11 15:48:19 -05:00
Joe Taylor
8717a4892f
Another try at getting "Save Decoded" right for all modes.
2021-03-10 16:09:53 -05:00
Joe Taylor
4d4ecfbcda
Don't kill Tx on closing Settings. Warn if TxFreq should be 700 Hz, instead of forcing changes to 700 or 1000 Hz.
2021-03-10 15:08:52 -05:00
Joe Taylor
5ca8e10c41
Fix "Save Decoded". Seems it has been broken for a while, in all modes.
2021-03-09 11:43:28 -05:00
Bill Somerville
2decf7473a
Disable nag message
2021-03-05 12:14:50 +00:00
Bill Somerville
ff87cefc5d
Merge branch 'release-2.4.0'
2021-03-04 18:13:18 +00:00
Bill Somerville
b7b4ebdb89
Proposed RC2 expiry date
2021-03-04 11:56:34 +00:00
Bill Somerville
22f1ba6a6d
Merge branch 'support-2.3.1' into release-2.4.0
2021-03-03 23:58:39 +00:00
Bill Somerville
6f01f72621
Log entries should not generated by replying to repeated final messages
2021-03-03 21:58:49 +00:00
Joe Taylor
314a506d51
Remove ISCAT mode.
2021-03-03 11:50:34 -05:00
Bill Somerville
6c2cc22524
Remove unnecessary variable
2021-03-03 14:34:42 +00:00
Bill Somerville
811cdc07b9
Pop up contest log window in MSK144 contest modes
2021-03-03 14:33:55 +00:00
Bill Somerville
a555236b9e
Ensure appended AP information does not affect QSO sequencing
2021-03-03 11:51:22 +00:00
Bill Somerville
2e1ed58129
Ensure double-click of repeated final message sends correct response
2021-03-02 19:23:17 +00:00
Bill Somerville
5542540e75
Ensure double-click of repeated final message responds correctly
2021-03-01 22:20:30 +00:00
Bill Somerville
01dff71070
Re-enable EU VHF Contest mode messages in MSK144 mode
...
Also bring message checking utilities up to date with the latest EU
VHF Contest mode source encodings.
2021-02-24 02:21:31 +00:00
Bill Somerville
c44bcb1f44
Repair v2.3.0 regressions in sequencing
...
Handle RRR messages correctly in contest modes and fix failures to
sequence some messages.
2021-02-24 02:19:11 +00:00
Bill Somerville
9f6cf3444e
Merge branch 'charlies-txfreq' into release-2.4.0
2021-02-11 18:22:16 +00:00
Charlie Suckling
6868556036
Set-default-Tx-Frequencies-for-Q65-and-limit-mode-selection
2021-02-11 18:00:14 +00:00
Charlie Suckling
399aac84d1
Set default Tx Frequencies for Q65
2021-02-11 18:00:10 +00:00
Joe Taylor
25a5b780c4
Reinstate and enable the "Call 1st" box for Q65.
2021-02-07 08:48:41 -05:00
Joe Taylor
1c038ef979
Remove the "Call 1st" checkbox from the Q65 GUI. It's not used.
2021-02-06 13:07:01 -05:00
Joe Taylor
b1c41932b1
Another try at keeping signal report constant within a QSO.
2021-02-06 13:01:28 -05:00
Joe Taylor
2f4cf2f406
Revert "Tentative fix to keep the transmitted signal report constant during a QSO. Please test!"
...
This reverts commit 70f460355b
2021-02-06 12:12:20 -05:00
Joe Taylor
9782b0f98d
Revert "Better way of updating m_lastQSOProgress, when signal report is first sent."
...
This reverts commit d4f4057751
2021-02-06 12:12:06 -05:00
Joe Taylor
d4f4057751
Better way of updating m_lastQSOProgress, when signal report is first sent.
2021-02-05 16:49:56 -05:00
Joe Taylor
70f460355b
Tentative fix to keep the transmitted signal report constant during a QSO. Please test!
2021-02-05 16:16:53 -05:00
Bill Somerville
767f53e79e
RC nag message and expiry
2021-02-03 11:38:52 +00:00
Bill Somerville
d7232c017e
Merge branch 'develop' into feat-fst280
2021-02-02 17:15:47 +00:00
Joe Taylor
48713f0f38
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280
2021-01-28 07:43:14 -05:00
Bill Somerville
86efe9ec22
Merge branch 'release-2.3.0' into develop
2021-01-28 11:17:51 +00:00
Bill Somerville
3629a4e071
Qt <5.8 compatibility
2021-01-27 21:14:11 +00:00
Bill Somerville
c631f24a3f
Bump expiry
2021-01-25 00:46:23 +00:00
Bill Somerville
86572dbc6e
Extend expiry
2021-01-25 00:28:30 +00:00
Joe Taylor
e7061abc7c
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280
2021-01-23 10:47:42 -05:00
Joe Taylor
74a43a658c
Clear the numbers in ndecodes_label when Clear Avg is clicked.
2021-01-23 10:36:07 -05:00
Bill Somerville
10f574a1ec
Qt 5.15 compatibility
2021-01-22 22:59:38 +00:00
Bill Somerville
899a7fd895
Merge branch 'develop' into feat-fst280
2021-01-22 22:27:34 +00:00
Joe Taylor
e222e66302
Write the full Q65 submode name into ALL.TXT.
2021-01-22 15:32:47 -05:00
Joe Taylor
8a436b63dd
Separate message averaging for Odd and Even sequences.
2021-01-19 16:06:10 -05:00
Bill Somerville
afee4d9a28
Merge branch 'release-2.3.0' into develop
2021-01-16 23:37:14 +00:00
Bill Somerville
2d4256d593
Add time stamp to rig control error messages details
2021-01-16 23:35:53 +00:00
Joe Taylor
397c31a62d
Extend red/orange sync curves to full width. Display navg on status bar.
2021-01-16 12:21:13 -05:00
Joe Taylor
1f9eeb52cc
Add user option for Auto_Clear_Avg after a decode.
2021-01-15 14:12:52 -05:00
Joe Taylor
f55ac6741b
Post single-transmission Q65 decodes to the left panel.
2021-01-10 16:28:52 -05:00
Joe Taylor
08ef142cb9
Trim the Tx message sent to the right panel.
2021-01-07 11:46:36 -05:00
Bill Somerville
40cf752fe6
Fix missed merge conflict
2021-01-04 23:01:04 +00:00
Bill Somerville
e3de5480e2
Merge branch 'master' into develop
2021-01-04 22:57:31 +00:00
Bill Somerville
c9fb6510a0
Update expiry and nag message
2021-01-04 22:50:02 +00:00
Bill Somerville
fd8c993b7b
Update copyright years
2021-01-04 21:55:15 +00:00
Bill Somerville
f2e9c1d91d
Merge branch 'develop' into feat-fst280
2021-01-04 15:53:21 +00:00
Bill Somerville
94977df845
Merge branch 'release-2.3.0' into develop
2021-01-04 15:38:06 +00:00
Steven Franke
66ddeff25e
Do not save c2 files in FST4W mode.
2021-01-04 15:00:02 +00:00
Joe Taylor
6b351165f2
Re-introduce Q65 timer calls. Extend red sync baseline to minimum +/- 100 Hz.
2021-01-01 10:47:22 -05:00
Joe Taylor
8a4b5b6a40
Various tweaks to the Q65 decoder; new numbering of the end-of-line decoding flags.
2020-12-31 15:52:06 -05:00
Bill Somerville
1583eb34ce
Merge branch 'release-2.3.0' into develop
2020-12-30 21:47:24 +00:00
Bill Somerville
a38ec853a4
Don't pick up reports to other stations as ours
2020-12-30 21:45:57 +00:00
Joe Taylor
5d7b5f83e2
Fix several more flaws in the way Q65 decodes are presented.
2020-12-30 15:05:02 -05:00
Joe Taylor
412422db17
Add 'q' to the Q65 end-of-line flags; label right text window for "Average decodes".
2020-12-30 10:42:27 -05:00
Joe Taylor
171e466389
More work on Q65 message averaging.
2020-12-24 09:51:02 -05:00
Joe Taylor
1eb0d0471d
Tweak the "m_hsymStop" stop times for optimum EME performance.
2020-12-22 09:56:15 -05:00
Bill Somerville
938d96fecc
Save sub-mode details to .WAV file metadata for Q65 mode
2020-12-22 03:48:35 +00:00
Joe Taylor
044aa80dc4
Remove all vestiges of the QRA64 mode. It has been replaced by Q65.
2020-12-21 15:07:53 -05:00
Bill Somerville
dd631699da
Add the Tx message to the UDP Status(1) message
...
Thanks to Morgan (sri no other attribution given) for the initial
contribution this change is based on.
2020-12-21 01:31:57 +00:00
Joe Taylor
7005ac3c50
Control "Call 1st" visibility with AutoSeq status in Q65 mode.
2020-12-19 09:10:34 -05:00
Joe Taylor
67b82c7666
Remove the klunky 2D sync plot. The red sync curve is better.
2020-12-18 16:00:33 -05:00
Bill Somerville
e7c8eba2a5
Initialize member variable in correct place
2020-12-18 19:59:25 +00:00
Joe Taylor
b3769bb6c8
For Q65, plot a red "Sync curve" in the Wide Graph.
2020-12-18 13:31:14 -05:00
Joe Taylor
8507a42655
Quasi-graphical display of the sync ccf(f0,DT).
2020-12-17 17:02:28 -05:00
Joe Taylor
7051dc7ee6
Remove more vestiges of the obsolete "JT9+JT65" mode.
2020-12-15 14:48:27 -05:00
Joe Taylor
c4dbfbbdca
Must call wspr_config(false) when entering Q65 mode.
2020-12-09 13:55:47 -05:00
Joe Taylor
5b59633b2f
Re-enable transmission in Q65 submodes B and higher.
2020-12-09 09:34:09 -05:00
Bill Somerville
9c0fe669d6
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280
2020-12-07 20:43:49 +00:00
Bill Somerville
c9f9c1d7c8
Merge branch 'develop' into feat-fst280
2020-12-07 20:43:28 +00:00
Bill Somerville
b8f9708eac
Merge branch 'release-2.3.0' into develop
2020-12-07 20:43:03 +00:00
Bill Somerville
60792182ad
Environment variables to set audio buffer sizes and fix Windows Rx timing
...
The two environment variables:
WSJT_RX_AUDIO_BUFFER_FRAMES
WSJT_TX_AUDIO_BUFFER_FRAMES
each can be defined to an integer number which will be used as the
suggested audio buffer size for Rx and Tx respectively. Not setting
the variable or setting it to zero or less will cause the default
buffer size to be used, which should be a good choice for most, if not
all, systems.
2020-12-07 20:34:56 +00:00
Joe Taylor
d42363587e
Swtich from a fast mode to Q65 now closes FastGraph and opens WideGraph, as it should.
2020-12-06 21:42:30 -05:00
Bill Somerville
3d9a099fce
Reinstate changes that were reverted from commit df2daf6
...
Changes were moved aside to simplify a big merge commit with many
conflicts.
2020-12-07 00:18:52 +00:00
Bill Somerville
2964bc6295
Merge branch 'develop' into feat-fst280
2020-12-06 22:27:07 +00:00
Bill Somerville
f290cec93b
Revert "Remove JT9+JT65 mode. Remove labNextCall. Tighten up central array of GUI controls."
...
This reverts commit df2daf60bd
2020-12-06 17:51:06 +00:00
Bill Somerville
06f9800b2f
Merge branch 'release-2.3.0' into develop
2020-12-05 18:43:00 +00:00
Joe Taylor
6416777278
Set ':' as the "mode character" for Q65.
2020-12-04 15:55:03 -05:00
Joe Taylor
7500adce8b
Allow "@1500", etc., single-tone transmissions in Q65 mode.
2020-12-04 14:53:45 -05:00
Bill Somerville
f3a2c653aa
Revert to default o/s or Qt Tx audio buffer sizes
2020-12-04 18:59:41 +00:00
Bill Somerville
50d0543c03
Test version with environment variable to set Tx audio buffer size
...
WSJT_TX_AUDIO_BUFFER_FRAMES takes the following values:
-1 - use Qt/system default
0 - use 200 mS (WSJT-X default)
+ve integer - value is number of frames at 48 kHz
-1 is likely to be a good choice on Windows and may macOS. 0 has
proven to be good on Windows. On Linux 0 may be OK but we need to try
other values.
The value is only a hint, the actual value used along with the period
size (the size of each chunk of samples requested by the system) is
printed in an info level diagnostic message at the start of each
transmission.
2020-12-03 01:49:21 +00:00
Bill Somerville
7f1a537e6e
Fix up versioning after merge from release branch
2020-12-01 16:06:56 +00:00
Bill Somerville
2db2884c39
Fix regression with selecting a working frequency when changing mode
2020-12-01 15:11:36 +00:00
Bill Somerville
6a44e68033
Repair regression that stopped Best S&P transmitting on a match
...
This change also ensures that second or subsequent matches in the same
T/R period do not trigger a QSO with a new QSO partner.
2020-11-27 12:36:24 +00:00
Bill Somerville
3663b3ea32
MultiGeometryWidget template class abstracts window geometry changes
2020-11-27 01:14:12 +00:00
Bill Somerville
0fc5639fd5
Repair a regression causing missing Rx decode timestamps in ALL.TXT
2020-11-18 02:06:30 +00:00
Joe Taylor
abe06e5dbb
Access Q65 Quick-Start Guide from Help menu.
2020-11-17 10:46:20 -05:00
Bill Somerville
a1808c99f7
Fix issue with main window height growing on restart
2020-11-17 00:55:24 +00:00
Joe Taylor
eeed375baf
Tell user to go back it he selects F+H in a mode other than FT8.
2020-11-16 16:28:37 -05:00
Bill Somerville
f10d6fb712
Fix regression in hiding Rx Frequency window titles & headings
2020-11-16 17:36:50 +00:00
Joe Taylor
df2daf60bd
Remove JT9+JT65 mode. Remove labNextCall. Tighten up central array of GUI controls.
2020-11-16 10:06:10 -05:00
Bill Somerville
09a8b3f5ef
Reinstate RC nag
2020-11-15 01:12:55 +00:00
Bill Somerville
21e7560b89
Simplify logging of missing/extra audio input samples
...
These warnings and errors now go to the the system log rather than a
MessageBox.
2020-11-14 20:50:27 +00:00
Joe Taylor
dc64e46620
Restore submode on program restart.
2020-11-13 13:39:32 -05:00
Bill Somerville
9ea903b259
Merge branch 'develop' into feat-boost-log
2020-11-12 13:36:25 +00:00
Bill Somerville
dc169c3a84
Resolve some issues with sequencing of R+rprt and sign-off messages
2020-11-12 13:32:56 +00:00
