Commit Graph

913 Commits

Author SHA1 Message Date
Steven Franke
ee05f5fed5 Make CPlotter::draw bail out if it sees bad data in red.dat. 2021-03-05 13:00:28 -06:00
Bill Somerville
2decf7473a
Disable nag message 2021-03-05 12:14:50 +00:00
Bill Somerville
ff87cefc5d
Merge branch 'release-2.4.0' 2021-03-04 18:13:18 +00:00
Bill Somerville
b7b4ebdb89
Proposed RC2 expiry date 2021-03-04 11:56:34 +00:00
Bill Somerville
22f1ba6a6d
Merge branch 'support-2.3.1' into release-2.4.0 2021-03-03 23:58:39 +00:00
Bill Somerville
6f01f72621
Log entries should not generated by replying to repeated final messages 2021-03-03 21:58:49 +00:00
Joe Taylor
314a506d51 Remove ISCAT mode. 2021-03-03 11:50:34 -05:00
Bill Somerville
6c2cc22524
Remove unnecessary variable 2021-03-03 14:34:42 +00:00
Bill Somerville
811cdc07b9
Pop up contest log window in MSK144 contest modes 2021-03-03 14:33:55 +00:00
Bill Somerville
a555236b9e
Ensure appended AP information does not affect QSO sequencing 2021-03-03 11:51:22 +00:00
Bill Somerville
2e1ed58129
Ensure double-click of repeated final message sends correct response 2021-03-02 19:23:17 +00:00
Bill Somerville
5542540e75
Ensure double-click of repeated final message responds correctly 2021-03-01 22:20:30 +00:00
Bill Somerville
7768b9d30f
Change default button to Cancel on contest log delete confirmation 2021-03-01 22:19:08 +00:00
Bill Somerville
01dff71070
Re-enable EU VHF Contest mode messages in MSK144 mode
Also bring  message checking utilities up  to date with the  latest EU
VHF Contest mode source encodings.
2021-02-24 02:21:31 +00:00
Bill Somerville
c44bcb1f44
Repair v2.3.0 regressions in sequencing
Handle RRR  messages correctly  in contest modes  and fix  failures to
sequence some messages.
2021-02-24 02:19:11 +00:00
Bill Somerville
ddbf37cbd2
Update splash screen 2021-02-18 12:18:43 +00:00
Bill Somerville
9f6cf3444e
Merge branch 'charlies-txfreq' into release-2.4.0 2021-02-11 18:22:16 +00:00
Charlie Suckling
6868556036
Set-default-Tx-Frequencies-for-Q65-and-limit-mode-selection 2021-02-11 18:00:14 +00:00
Charlie Suckling
399aac84d1
Set default Tx Frequencies for Q65 2021-02-11 18:00:10 +00:00
Joe Taylor
3962a1eeba Merge branch 'release-2.4.0' of bitbucket.org:k1jt/wsjtx into release-2.4.0 2021-02-10 13:56:56 -05:00
Bill Somerville
93dd5a92e5
Update splash screen 2021-02-09 10:46:56 +00:00
Joe Taylor
25a5b780c4 Reinstate and enable the "Call 1st" box for Q65. 2021-02-07 08:48:41 -05:00
Joe Taylor
1c038ef979 Remove the "Call 1st" checkbox from the Q65 GUI. It's not used. 2021-02-06 13:07:01 -05:00
Joe Taylor
b1c41932b1 Another try at keeping signal report constant within a QSO. 2021-02-06 13:01:28 -05:00
Joe Taylor
2f4cf2f406 Revert "Tentative fix to keep the transmitted signal report constant during a QSO. Please test!"
This reverts commit 70f460355b.
2021-02-06 12:12:20 -05:00
Joe Taylor
9782b0f98d Revert "Better way of updating m_lastQSOProgress, when signal report is first sent."
This reverts commit d4f4057751.
2021-02-06 12:12:06 -05:00
Joe Taylor
d4f4057751 Better way of updating m_lastQSOProgress, when signal report is first sent. 2021-02-05 16:49:56 -05:00
Joe Taylor
70f460355b Tentative fix to keep the transmitted signal report constant during a QSO. Please test! 2021-02-05 16:16:53 -05:00
Bill Somerville
767f53e79e
RC nag message and expiry 2021-02-03 11:38:52 +00:00
Bill Somerville
d7232c017e
Merge branch 'develop' into feat-fst280 2021-02-02 17:15:47 +00:00
Joe Taylor
558b426944 Remove Q65_MultiSync as a separate option. We always show both red and orange sync curves. 2021-02-01 15:28:22 -05:00
Joe Taylor
6519c07a71 Working toward a good multi-decode solution ... 2021-01-31 15:10:50 -05:00
Joe Taylor
e711aa23da Don't display red sync curve where it's equal to 0.0. 2021-01-31 14:44:06 -05:00
Joe Taylor
f7cde117fe Extens orange sync surve to the full displayed frequency range. 2021-01-31 13:41:32 -05:00
Joe Taylor
77d8f7ab9c Display both red and orange sync curves. (?? Temporary ??) 2021-01-29 14:42:00 -05:00
Joe Taylor
48713f0f38 Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2021-01-28 07:43:14 -05:00
Bill Somerville
86efe9ec22
Merge branch 'release-2.3.0' into develop 2021-01-28 11:17:51 +00:00
Bill Somerville
3629a4e071
Qt <5.8 compatibility 2021-01-27 21:14:11 +00:00
Bill Somerville
c631f24a3f
Bump expiry 2021-01-25 00:46:23 +00:00
Bill Somerville
86572dbc6e
Extend expiry 2021-01-25 00:28:30 +00:00
Joe Taylor
e7061abc7c Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2021-01-23 10:47:42 -05:00
Joe Taylor
74a43a658c Clear the numbers in ndecodes_label when Clear Avg is clicked. 2021-01-23 10:36:07 -05:00
Bill Somerville
10f574a1ec
Qt 5.15 compatibility 2021-01-22 22:59:38 +00:00
Bill Somerville
899a7fd895
Merge branch 'develop' into feat-fst280 2021-01-22 22:27:34 +00:00
Joe Taylor
e222e66302 Write the full Q65 submode name into ALL.TXT. 2021-01-22 15:32:47 -05:00
Joe Taylor
8a436b63dd Separate message averaging for Odd and Even sequences. 2021-01-19 16:06:10 -05:00
Bill Somerville
afee4d9a28
Merge branch 'release-2.3.0' into develop 2021-01-16 23:37:14 +00:00
Bill Somerville
2d4256d593
Add time stamp to rig control error messages details 2021-01-16 23:35:53 +00:00
Joe Taylor
397c31a62d Extend red/orange sync curves to full width. Display navg on status bar. 2021-01-16 12:21:13 -05:00
Bill Somerville
455ec12e44
Merge branch 'develop' into feat-fst280 2021-01-15 22:14:36 +00:00
Joe Taylor
1f9eeb52cc Add user option for Auto_Clear_Avg after a decode. 2021-01-15 14:12:52 -05:00
Joe Taylor
f55ac6741b Post single-transmission Q65 decodes to the left panel. 2021-01-10 16:28:52 -05:00
Joe Taylor
f5d2c5cd90 Erase old T M R 73 when RxFreq has changed. 2021-01-07 15:51:52 -05:00
Joe Taylor
08ef142cb9 Trim the Tx message sent to the right panel. 2021-01-07 11:46:36 -05:00
Bill Somerville
9cd6edbeca
Merge branch 'release-2.3.0' into develop 2021-01-07 11:38:08 +00:00
Bill Somerville
77c3562d00
Merge branch 'feat-fst280' into develop 2021-01-06 16:09:54 +00:00
Bill Somerville
3e32631560
Add tool tip for "Rx All Freq" and update l10n files 2021-01-06 00:22:57 +00:00
Bill Somerville
c75dcde65e
Remove unnecessary main window initial size constraints 2021-01-05 23:36:46 +00:00
Bill Somerville
652ccf4ce3
Merge branch 'release-2.3.0' into develop 2021-01-05 23:35:57 +00:00
Bill Somerville
633990a616
Define reasonably logical widget navigation orderings 2021-01-05 23:28:40 +00:00
Joe Taylor
f78b6710f4 Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2021-01-05 12:02:11 -05:00
Joe Taylor
ea1510d837 Don't display DT on waterfall when orange sync curve is used. 2021-01-05 12:01:20 -05:00
Bill Somerville
11603b435f
Merge branch 'develop' into feat-fst280 2021-01-05 16:43:18 +00:00
Joe Taylor
b8bd745816 Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2021-01-05 09:53:54 -05:00
Bill Somerville
40cf752fe6
Fix missed merge conflict 2021-01-04 23:01:04 +00:00
Bill Somerville
e3de5480e2
Merge branch 'master' into develop 2021-01-04 22:57:31 +00:00
Bill Somerville
c9fb6510a0
Update expiry and nag message 2021-01-04 22:50:02 +00:00
Bill Somerville
fd8c993b7b
Update copyright years 2021-01-04 21:55:15 +00:00
Joe Taylor
ea271152b8 Implement "orange sync curve", useful for multi-signal situation. 2021-01-04 14:38:02 -05:00
Bill Somerville
f2e9c1d91d
Merge branch 'develop' into feat-fst280 2021-01-04 15:53:21 +00:00
Bill Somerville
94977df845
Merge branch 'release-2.3.0' into develop 2021-01-04 15:38:06 +00:00
Steven Franke
66ddeff25e
Do not save c2 files in FST4W mode. 2021-01-04 15:00:02 +00:00
Bill Somerville
5fee4796b1
Merge branch 'release-2.3.0' into develop 2021-01-02 21:13:47 +00:00
Bill Somerville
e4a7591a83
Make the colour highlighting scheme immune to style sheet overrides 2021-01-02 18:02:09 +00:00
Joe Taylor
6b351165f2 Re-introduce Q65 timer calls. Extend red sync baseline to minimum +/- 100 Hz. 2021-01-01 10:47:22 -05:00
Joe Taylor
8a4b5b6a40 Various tweaks to the Q65 decoder; new numbering of the end-of-line decoding flags. 2020-12-31 15:52:06 -05:00
Bill Somerville
1583eb34ce
Merge branch 'release-2.3.0' into develop 2020-12-30 21:47:24 +00:00
Bill Somerville
a38ec853a4
Don't pick up reports to other stations as ours 2020-12-30 21:45:57 +00:00
Joe Taylor
70e9df38cb Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-12-30 15:05:50 -05:00
Joe Taylor
5d7b5f83e2 Fix several more flaws in the way Q65 decodes are presented. 2020-12-30 15:05:02 -05:00
Bill Somerville
74f899677c
Fix up regexp detecting trailing Q65 decode quality information 2020-12-30 19:40:44 +00:00
Joe Taylor
197fd6a5ba Mofe the Q65 end-of-line flags so they're not so far to the right. 2020-12-30 13:06:33 -05:00
Joe Taylor
412422db17 Add 'q' to the Q65 end-of-line flags; label right text window for "Average decodes". 2020-12-30 10:42:27 -05:00
Joe Taylor
171e466389 More work on Q65 message averaging. 2020-12-24 09:51:02 -05:00
Joe Taylor
1eb0d0471d Tweak the "m_hsymStop" stop times for optimum EME performance. 2020-12-22 09:56:15 -05:00
Bill Somerville
938d96fecc
Save sub-mode details to .WAV file metadata for Q65 mode 2020-12-22 03:48:35 +00:00
Joe Taylor
c3b3dc1c61 Display T M R 73 markers for Q65 (C and higher submodes). 2020-12-21 15:38:58 -05:00
Joe Taylor
044aa80dc4 Remove all vestiges of the QRA64 mode. It has been replaced by Q65. 2020-12-21 15:07:53 -05:00
Bill Somerville
dd631699da
Add the Tx message to the UDP Status(1) message
Thanks to Morgan (sri no other attribution given) for the initial
contribution this change is based on.
2020-12-21 01:31:57 +00:00
Bill Somerville
b8c8477664
Fix a close down crash due to destruction ordering
Static QString variables are unwise as QApplication translators may
get destroyed before them.
2020-12-19 19:53:21 +00:00
Bill Somerville
dc771cdd88
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-12-19 16:34:38 +00:00
Joe Taylor
31189265b9 Erase the yellow "T M R 73" single-tone markers after a mode change. 2020-12-19 11:33:23 -05:00
Bill Somerville
c70fc7b583
Fix a close down crash due to destruction ordering
Static QString variables are unwise as QApplication translators may
get destroyed before them.
2020-12-19 16:32:37 +00:00
Joe Taylor
7005ac3c50 Control "Call 1st" visibility with AutoSeq status in Q65 mode. 2020-12-19 09:10:34 -05:00
Joe Taylor
450249dd4c Add a DT label to the Q65 red sync curve. 2020-12-18 16:19:01 -05:00
Joe Taylor
67b82c7666 Remove the klunky 2D sync plot. The red sync curve is better. 2020-12-18 16:00:33 -05:00
Joe Taylor
5315bbd88a Don't erase the red sync curve too soon. 2020-12-18 15:14:17 -05:00
Bill Somerville
e7c8eba2a5
Initialize member variable in correct place 2020-12-18 19:59:25 +00:00
Joe Taylor
04b11fda14 Don't plot the green line if using Q65_Sync. 2020-12-18 14:01:10 -05:00
Joe Taylor
b3769bb6c8 For Q65, plot a red "Sync curve" in the Wide Graph. 2020-12-18 13:31:14 -05:00
Joe Taylor
8507a42655 Quasi-graphical display of the sync ccf(f0,DT). 2020-12-17 17:02:28 -05:00
Joe Taylor
7051dc7ee6 Remove more vestiges of the obsolete "JT9+JT65" mode. 2020-12-15 14:48:27 -05:00
Joe Taylor
c4dbfbbdca Must call wspr_config(false) when entering Q65 mode. 2020-12-09 13:55:47 -05:00
Bill Somerville
5b60ddada1
Merge branch 'feat-fst280' into develop 2020-12-09 15:33:58 +00:00
Joe Taylor
5b59633b2f Re-enable transmission in Q65 submodes B and higher. 2020-12-09 09:34:09 -05:00
Bill Somerville
7e1b74ecc0
Moon distance in astronomical data window, tnx Charlie, G3WDG 2020-12-08 00:01:46 +00:00
Bill Somerville
9c0fe669d6
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-12-07 20:43:49 +00:00
Bill Somerville
c9f9c1d7c8
Merge branch 'develop' into feat-fst280 2020-12-07 20:43:28 +00:00
Bill Somerville
b8f9708eac
Merge branch 'release-2.3.0' into develop 2020-12-07 20:43:03 +00:00
Bill Somerville
60792182ad
Environment variables to set audio buffer sizes and fix Windows Rx timing
The two environment variables:

    WSJT_RX_AUDIO_BUFFER_FRAMES
    WSJT_TX_AUDIO_BUFFER_FRAMES

each can  be defined to  an integer number which  will be used  as the
suggested audio  buffer size for  Rx and Tx respectively.  Not setting
the variable  or setting  it to  zero or less  will cause  the default
buffer size to be used, which should be a good choice for most, if not
all, systems.
2020-12-07 20:34:56 +00:00
Bill Somerville
0410f4718f
Merge branch 'release-2.3.0' into develop 2020-12-07 10:44:52 +00:00
Bill Somerville
cefc8e2645
Use the system localized short date format for Log QSO dialog dates
This  brings these  fields  into line  with other  QSO  start and  end
date/time fields elsewhere in the user interface. Note that time entry
and edit fields  use a fixed hh:mm:ss 24-hour  clock format consistent
with UTC usage and of suitable accuracy for logging QSOs.
2020-12-07 10:41:33 +00:00
Joe Taylor
d42363587e Swtich from a fast mode to Q65 now closes FastGraph and opens WideGraph, as it should. 2020-12-06 21:42:30 -05:00
Bill Somerville
3d9a099fce
Reinstate changes that were reverted from commit df2daf6
Changes were moved aside to simplify a big merge commit with many
conflicts.
2020-12-07 00:18:52 +00:00
Bill Somerville
2964bc6295
Merge branch 'develop' into feat-fst280 2020-12-06 22:27:07 +00:00
Bill Somerville
f290cec93b
Revert "Remove JT9+JT65 mode. Remove labNextCall. Tighten up central array of GUI controls."
This reverts commit df2daf60bd.
2020-12-06 17:51:06 +00:00
Bill Somerville
06f9800b2f
Merge branch 'release-2.3.0' into develop 2020-12-05 18:43:00 +00:00
Joe Taylor
6416777278 Set ':' as the "mode character" for Q65. 2020-12-04 15:55:03 -05:00
Joe Taylor
7500adce8b Allow "@1500", etc., single-tone transmissions in Q65 mode. 2020-12-04 14:53:45 -05:00
Bill Somerville
f3a2c653aa
Revert to default o/s or Qt Tx audio buffer sizes 2020-12-04 18:59:41 +00:00
Bill Somerville
50d0543c03
Test version with environment variable to set Tx audio buffer size
WSJT_TX_AUDIO_BUFFER_FRAMES takes the following values:

 -1          - use Qt/system default
 0           - use 200 mS (WSJT-X default)
 +ve integer - value is number of frames at 48 kHz

-1 is  likely to  be a  good choice on  Windows and  may macOS.  0 has
proven to be good on Windows. On Linux  0 may be OK but we need to try
other values.

The value is only a hint, the  actual value used along with the period
size (the  size of each chunk  of samples requested by  the system) is
printed  in an  info level  diagnostic message  at the  start of  each
transmission.
2020-12-03 01:49:21 +00:00
Bill Somerville
94f0af72e3
Command line tool prints WSJT-X version to console, tnx Dave, W3DJS 2020-12-02 01:57:32 +00:00
Bill Somerville
7f1a537e6e
Fix up versioning after merge from release branch 2020-12-01 16:06:56 +00:00
Bill Somerville
4492d8e977
Add tool-tip for "Best S+P" push-button 2020-12-01 15:47:07 +00:00
Bill Somerville
2db2884c39
Fix regression with selecting a working frequency when changing mode 2020-12-01 15:11:36 +00:00
Bill Somerville
6a44e68033
Repair regression that stopped Best S&P transmitting on a match
This change also ensures that second or subsequent matches in the same
T/R period do not trigger a QSO with a new QSO partner.
2020-11-27 12:36:24 +00:00
Bill Somerville
3663b3ea32
MultiGeometryWidget template class abstracts window geometry changes 2020-11-27 01:14:12 +00:00
Bill Somerville
0fc5639fd5
Repair a regression causing missing Rx decode timestamps in ALL.TXT 2020-11-18 02:06:30 +00:00
Joe Taylor
abe06e5dbb Access Q65 Quick-Start Guide from Help menu. 2020-11-17 10:46:20 -05:00
Bill Somerville
a1808c99f7
Fix issue with main window height growing on restart 2020-11-17 00:55:24 +00:00
Joe Taylor
eeed375baf Tell user to go back it he selects F+H in a mode other than FT8. 2020-11-16 16:28:37 -05:00
Bill Somerville
f10d6fb712
Fix regression in hiding Rx Frequency window titles & headings 2020-11-16 17:36:50 +00:00
Bill Somerville
3cd567e464
Allow decodes window splitter widget to shrink its height further 2020-11-16 17:24:10 +00:00
Joe Taylor
7f772ecc53 Don't set a global minimum height: SWL mode wants much less. 2020-11-16 11:49:01 -05:00
Joe Taylor
bbcc9419b4 Set a mainwindow minimum height. 2020-11-16 10:37:09 -05:00
Joe Taylor
df2daf60bd Remove JT9+JT65 mode. Remove labNextCall. Tighten up central array of GUI controls. 2020-11-16 10:06:10 -05:00
Bill Somerville
09a8b3f5ef
Reinstate RC nag 2020-11-15 01:12:55 +00:00
Bill Somerville
21e7560b89
Simplify logging of missing/extra audio input samples
These warnings and errors  now go to the the system  log rather than a
MessageBox.
2020-11-14 20:50:27 +00:00
Joe Taylor
dc64e46620 Restore submode on program restart. 2020-11-13 13:39:32 -05:00
Bill Somerville
9ea903b259
Merge branch 'develop' into feat-boost-log 2020-11-12 13:36:25 +00:00
Bill Somerville
dc169c3a84
Resolve some issues with sequencing of R+rprt and sign-off messages 2020-11-12 13:32:56 +00:00
Bill Somerville
c7f2fdc404
Ensure Tx1 message is used by non-standard callsign holders
The only exception is type 2 prefix/suffix calls in non-77-bit modes.
2020-11-12 13:30:48 +00:00
Joe Taylor
3068f0c61f Use genwave() to create Q65 audio signal. Send "include averaging" flag to Q65 decoder. 2020-11-11 11:14:02 -05:00
Bill Somerville
de0af5a2ed
Merge branch 'feat-outgoing-udp-interface' into develop 2020-11-10 20:09:48 +00:00
Bill Somerville
ab780a324a
Testing options
Two new environment variables to control special testing behaviour:

    * WSJT_TX_BOTH - set to "1" to force transmission on both periods.

    * WSJT_REVERSE_DOPPLER - set to "1" to transpose Tx and Rx Doppler
      corrections. Use this to test Doppler tracking on a terrestrial
      link.
2020-11-06 18:28:59 +00:00
Bill Somerville
caa23f1101
Message Client allows sending multicast UDP on multiple interfaces 2020-11-05 03:37:01 +00:00
Joe Taylor
860b0ce21e Include TRperiod in the Q65 status bar label. 2020-11-03 15:49:24 -05:00
Bill Somerville
8516a4f538
New combo box with a list of checkable items 2020-11-03 20:28:29 +00:00
Bill Somerville
430d57c1ca
Network interface selection for outgoing UDP multicast datagrams
Default  selection  is  the  loop-back interface.  Users  who  require
interoperation  between  WSJT-X   instances  cooperating  applications
running on different hosts should  select a suitable network interface
and  carefully choose  a multicast  group address,  and TTL,  that has
minimal scope covering the necessary  network(s). Using 224.0.0.1 is a
reasonable    strategy    if   all    hosts    are    on   the    same
subnet. Administratively  scoped multicast group addresses  like those
within 239.255.0.0/16  can cover larger  boundaries, but care  must be
taken if the local subnet has access to a multicast enabled router.

The  IPv4  broadcast  address  (255.255.255.255) may  be  used  as  an
alternative  to multicast  UDP, but  note that  WSJT-X will  only send
broadcast UDP datagrams  on the loop-back interface,  so all recipient
applications must be running on the same host system.

The reference UDP Message protocol  applications are being extended to
be configurable  with a list of  interfaces to join a  multicast group
address on. By default they will only join on the loop-back interface,
which is also  recommended for any applications designed  to take part
in the WSJT-X  UDP Message Protocol. This allows full  user control of
the  scope of  multicast  group membership  with  a very  conservative
default  mode  that will  work  with  all interoperating  applications
running on the same host system.
2020-11-02 15:33:44 +00:00
Joe Taylor
20b6d65c61 Allow WSJT-X to generate the new Q65 code. Loopback Q65 QSOs now work. 2020-10-28 12:04:43 -04:00