Notes:
1. Equivalents of wisdom1.bat will be needed for *nix and OS X. (The
version now added to the source .../lib directory is an example only.)
2. Installers should offer to run the wisdom1[.bat] script at installation
time.
3. wisdom1[.bat] and fftwf-wisdom[.exe] must be installed in .../bin directory
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4607 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
To allow personal builds on Mac OS X on 10.7 where no 10.9 SDK is
available, the key options have been made CMake ached variables so
that they may be overridden at configure time.
Merged from wsjtx-1.4 branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4585 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Split mode was inadvertently disabled in a prior change to disallow
split mode on the "None" rig.
Allow OmniRig to report a rig offline status for up to 5s since short
periods of "rig not responding" seem to happen regularly for no good
reason.
Use high level OmniRig SetSimplexMode()/SetSplitMode() functions to
initialize rig.
Merged from wsjtx-1.4 branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4578 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Both decoders now have slightly better performance and faster
execution. The rare "duplicate decodes" in JT9 were eliminated.
On Windows, at least, calls to f90 routine system_clock() do not
provide correct wall time increments. Changed to using secnds()
instead.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4571 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
In order to support the WSJT-X super build in LOCAL mode the location
of the User Guide needs to be specified.
A CMake cache variable WSJT_MANUAL_DIRECTORY has been added to allow
the URI of the User Guide directory to be specified at configure time.
The default value remains as the project web site.
Merged from branch wsjtx-1.4.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4566 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
CMake v3 complains about missing dependencies so the manpages
dependency must not be added to the wsjtx target unless it exists.
Merged from wsjtx-1.4 branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4564 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The debian target was being added as a dependency to teh wsjtx target
even when it doesn't exist. This isn't allowed in CMake v3 so it no
longer added if it doesn't exist.
Merged from wsjtx-1.4 branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4562 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The minimum OS X version supported and SDK selection compiler options
were not being set for Fortran compiles on Mac.
As CMake 3.0.2 is the current release the facilities obsoleted by
CMake 3.0 have been removed. This also entails making CMake 2.8.10 the
minimum supported version.
Merged from wsjtx-1.4 branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4560 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The normal way to view console output from a Windows GUI application
(i.e. with a WinMain entry point) is to attach a debugger which will
then receive the application console output in its own console.
If it is required to build wsjtx.exe as a console application it may
be done by setting the new WSJT_CREATE_WINMAIN CMake option to
OFF. This option is only available for Debug configuration builds to
avoid accidental shipping of non-Debug configuration builds as a
console application.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4555 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The lib/Makefile.MinGW makefile has been enhanced to link to the DLL
version of fftw3 which is the normal version of the library that you
get with the Windows installer.
The library is located by passing the FFTW3_DIR variable on the make
command line. For example on my system:
$ # In a MinGW console
$ cd ~/src/wsjtx/lib
$ make QT_DIR=/c/Tools/Qt/5.2.1/mingw48_32 \
> FFTW3_DIR=/c/Tools/fftw-3.3.3-dll32-2
Similarly with the qmake project:
$ # In a Qt MinGW 32-bit console
$ cd ~/src/wsjtx
$ qmake \
> HAMLIB_DIR=c:/test-install/hamlib/mingw48_32 \
> FFTW3_DIR=c:/Tools/fftw-3.3.3-dll32-2
$ mingw32-make
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4551 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The DMG volume name must not change between versions as it invalidates
the .DS_Store file backgound image.
Merged from wsjtx-1.4 branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4548 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
DDUtil by K5FR allows multiple clients to control a FlexRadio or
similar by emulating an HRD TCP/IP server.
Merged from wsjtx-1.4 branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4542 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Routine packmsg now tries the shortlist (Type 1 prefix or suffix) first.
Then it tries to to make a valid message using a Type 2 prefix or suffix.
If both fail, it packs the first 13 characters as a free-text message.
The GUI now generates the most useful messages with compound callsigns
of all valid types.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4533 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
SYSTEM_CLOCK() did not work as well, in the Windows Release build.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4525 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
There is an outstanding issue with the FTdx3000 via HRD in that
setting the "other" VFO mode doesn't work. This appears to be
insoluable and the only current option is to set "Mode" to "None" in
WSJT-X leaving mode setting to the user. As it happens the best mode
combo on this rig is probably DATA-U on Tx and USB on Rx which would
require "Mode" as "None" anyway.
This change is quite large including several general strategy changes
in an attempt to make the HRD interface more generic and more robust.
Also cleaned up trace output removing stuff that is working and just
clutters output.
Merged from wsjtx-1.4 branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4524 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Commander sends invalid UTF-8 strings for numbers that contain group
separators, e.g. non-break space U+00A0 in French regional number
formats.
Revert to old undocumented frequency query commands that always use
'.' and ',' for number punctuation.
Merged from wsjtx-1.4 branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4519 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The justified text in the project description caused many unwanted
hard line breaks when viewed in Debian package install tools.
Merged from wsjtx-1.4 branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4512 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
On Ubuntu a2x generates invalid shadow manpages. A sed edit has been
added to teh build script to rectify this.
Merged from wsjtx-1.4 branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4510 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Debian packages are only build if dpkg-buildpackage is available and
RPM package generation is only done if rpmbuild is available.
Merged from wsjtx-1.4 branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4504 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The manpage directory build was using an invalid a2x option and was
liable to errors in parallel builds due to gzip on a wildcard having
no input files.
Merged from wsjtx-1.4 branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4500 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The kavasd binary is not open source so cannot be automatically
bundled with WSJT-X on Linux.
The CMake option WSJT_INCLUDE_KVASD has been added with a default of
OFF in Linux Release configuration builds.
Merged from wsjtx-1.4 branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4498 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
On some systems or font combinations this window starts too small for
the layout to render all the widgets on the Radio tab.
Merged from wsjtx-1.4 branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4482 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The existing trace file location created when the CMake option
WSJT_QDEBUG_TO_FILE is ON is not usable with a Linux package installed
in /usr.
Moved location to the temporary directory as <APPNAME>_trace.log
Merged from wsjtx-1.4 branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4475 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
To allow for intermittant CAT failures one retry before bringing up a
message box should allow many setups to be more reliable.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4473 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Since the log files have moved to a hidden directory a menu action to
open the logs directory in a suitable system applicaiton is needed.
Added "Open log directory" to File manu bar pop up menu.
Merged from wsjtx-1.4 branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4471 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Spaces left in the CAT network server cause incorrect servername
lookups, particularly just spaces which override the default values.
Merged from wsjtx-1.4.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4469 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Because of confilicts using the shared memory to communicate with jt9
only one instance of WSJT-X may run with each unique key (rig name).
Added a QLockFile for each unique key in the temp directory and logic
to deal with stale locks and retries.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4465 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Labels should always be multiples of the major tick interval.
When Start freq is nonzero, labels need to be moved.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4464 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The error and information output from command line parsing needs to be
graphical on Windows since the application is not a console
application.
Made the output graphical on all platforms.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4462 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
