Commit Graph

258 Commits

Author SHA1 Message Date
Joe Taylor
6d3ca346e0 Further progress toward a usable "FreqCal" (Frequency Calibration) mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7448 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-04 19:07:35 +00:00
Joe Taylor
dbeb21b050 Some possibly temporary ideas, playing around with a "FreqCal" mode to do simple frequency calibrations.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7446 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-03 21:37:38 +00:00
Joe Taylor
a7bc259319 Clarify a Tool Tip.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7444 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2017-01-03 13:21:14 +00:00
Joe Taylor
33628fd9f4 1. Starting to add SWL feature for MSK144 Sh messages.
2. Add (part of) a geometry patch from W9MDB.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7433 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-30 21:46:29 +00:00
Joe Taylor
f98aa4e6f4 Options (via Ctrl+M) to minimize size of Main Window and Wide Graph; add separate Start/End times to logging information. Thanks to W9MDB!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7430 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-30 15:45:31 +00:00
Joe Taylor
d2fb561f10 Add "Clear reference spectrum" to the File menu.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7426 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-24 20:05:28 +00:00
Joe Taylor
a45a4d710b Make the Tx# buttons narrower.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7425 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-23 18:59:37 +00:00
Joe Taylor
80e594d7b8 Back out the temporary changes for WSPR-15 in r7418 and 7419.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7420 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-22 14:24:56 +00:00
Joe Taylor
9e97dcf942 Allow WPR-15 Tx audio freq up to 1625 Hz.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7419 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-21 20:31:30 +00:00
Joe Taylor
b0e738b1f2 Test code: starting to implement WSPR-15. Not for general use!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7418 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-21 20:26:49 +00:00
Bill Somerville
dc6c7f959b Remove unnecessary main window size constraints
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7377 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-11 21:19:16 +00:00
Joe Taylor
cea0e4db41 Better label on Help menu for list of Type 1 prefixes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7354 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-02 20:20:22 +00:00
Joe Taylor
4838d97370 New parameters for AP decoding in QRA64. Do not use this revision on the air!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7340 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-27 15:50:47 +00:00
Bill Somerville
840163ab97 Change the "CQ nnn ..." logic to specify the calling frequency...
... rather than the working frequency.

Users set their working frequency and specify a calling frequency as a
kHz offset  into the  current Rx  MHz with the  main window  spin box.
Calling CQ on  the specified calling frequency is  enabled by checking
the associated option.

Also enhanced  the auto  sequencing to handle  short code  73 messages
correctly.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7339 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-11-27 01:34:43 +00:00
Bill Somerville
3324da9c01 Remove outer main window window sizes for better cross platform behaviour
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7254 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-28 14:34:37 +00:00
Joe Taylor
aa09a55ec0 Clean up a few more Tool Tips.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7249 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-27 17:04:34 +00:00
Joe Taylor
fd7514c6fc Cleanup of Tool Tips and Tab Order.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7246 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-26 20:22:26 +00:00
Joe Taylor
c2d2ec8dd7 Remove vestigial references to WSPR_2. Update wsjtx.pro. Add samples for all modes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7208 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-20 15:43:03 +00:00
Joe Taylor
efaa814ef6 Make CQ nnn widger wider; enable CQ nnn checkbox only if Split is active; make CQ nnn available to all users.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7185 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-15 13:23:40 +00:00
Joe Taylor
2a745023d4 Set pbTxMode button enabled by default.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7180 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-14 13:44:29 +00:00
Joe Taylor
f670825d84 1. Display "best of N" rather than "average of N" in Wide Graph waterfall.
2. More fixes of widget visibilities.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7175 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-13 19:20:24 +00:00
Joe Taylor
a3410b1e02 Display Hot A/B and El in MSK144 mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7173 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-13 18:02:44 +00:00
Joe Taylor
b42c096e63 Resize the "CQ nnn" spinner.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7172 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-13 16:50:22 +00:00
Joe Taylor
1cc278cce6 1. Enable CW ID for fast modes.
2. Correct several more flaws in making GUI controls visible or invisible.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7170 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-13 16:19:24 +00:00
Joe Taylor
823b018592 Trying to make position and status of the central GUI controls correct and logical for VHF and non-VHF usage.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7165 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-12 16:33:18 +00:00
Joe Taylor
8ee9316537 Re-arrange positions of some center-of-mainwindow GUI controls.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7164 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-11 20:54:37 +00:00
Joe Taylor
13ffbb20eb Remove JTMSK mode and all related routines. Beware of possible unintended side effects!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7079 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-13 17:52:45 +00:00
Bill Somerville
9fb5422fbb Tidy up the settings advanced tab layout and remove unnecessary elements
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7074 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-11 01:09:40 +00:00
Joe Taylor
cbc4ef1b49 Change cbEME to cbAutoSeq (always). Protect against frequency jump in MSK144.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7057 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-06 15:36:17 +00:00
Bill Somerville
bdc8dd881c Now 6 digit locators are possible again add option to prefer type 1 WSPR messages
This  option, on  by  default, maintains  backwards compatibility  for
non-compound  callsign  holders.   If   switched  off  and  they  have
specified a 6 digit  grid then it will be sent in  the type 2 protocol
using two messages and a hashed callsign.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7053 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-03 23:33:13 +00:00
Bill Somerville
afed56d008 Proper splash screen and release notes help menu link
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7007 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-06 13:52:14 +00:00
Joe Taylor
9993760bac Re-enable MSK144 click-to-decode, top panel only.
Fix the improper display of "Fast" checkbox.
Disable "CQ nnn" checkbox if MyCall is not K1JT or K9AN.
Use AppDir as path to execute the LDPC encode program.
Don't display submodes in mode label for JTMSK, MSK144.
Make Rx Freq spinner invisible in MSK144 mode.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7001 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-04 19:30:27 +00:00
Joe Taylor
dc7826d5ea Startup messge box for Alpha Release. New sigma limit in detectmsk40. Minor tweaks to GUI.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6994 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-08-04 15:20:16 +00:00
Steven Franke
dfffa7ada3 Synchorizing --> Synchronizing
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6924 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-16 01:01:06 +00:00
Joe Taylor
3016ccee01 Many renames: QRA65 --> QRA64, QRA02 --> QRA64.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6848 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-02 12:15:41 +00:00
Bill Somerville
cca1a17607 First attempt at a time based Tx watchdog
The watchdog configuration is now a spin box of minutes with a special
first value of disabled. WSJT-X counts  down minutes on the minute, if
the countdown  reaches zero  any attempt to  transmit is  aborted. The
countdown is  reset by any mouse  press or key press  event inside the
main window or if the Tx message changes (auto sequencing).

The  status  bar  now  shows  the  Tx  watchdog  countdown  if  it  is
active. This  information is shown  to the  right of the  progress bar
text.

The warning message boxes triggered  within the GUI update routine now
no longer block the GUI updates.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6840 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-07-01 11:36:59 +00:00
Joe Taylor
100c3d3121 More changes for QRA01 --> QRA02.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6825 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-29 19:12:46 +00:00
Bill Somerville
4c4b182b72 Allow for empty decode message in UDP reply message
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6812 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-28 15:53:50 +00:00
Joe Taylor
9c19ff3eea Making progress on what will become QRA65 mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6794 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-22 20:26:41 +00:00
Bill Somerville
e93673e975 Remove non-portable UI geometry values from MainWindow
Qt does its best job  laying out widgets consistently across platforms
if all unecessary constraints are  removed. Widget layout policies can
almost always be used to achieve the required layout without reverting
to hard coded pixel values.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6759 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-11 14:27:17 +00:00
Joe Taylor
143736129b Starting to implement the hooks for interfacing to QRA mode.
Pass file path for peg-128 files to fast_decode().  (Inelegant, but it works.)


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6741 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-08 21:20:58 +00:00
Joe Taylor
9845494276 Install MSK144 as a new mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6721 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-06-03 15:45:54 +00:00
Bill Somerville
ed6b37a87a Fix minor typo and remove potentially non-portable UI size constraints
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6632 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-23 11:22:48 +00:00
Bill Somerville
4cebdddfe5 Add multiple configurations navigation and management
Multiple configurations  are accessed and  maintained from a  new main
window menu bar  pop up menu "Configurations". The  prior settings are
the  "Default"  entry. New  configurations  may  be added  by  cloning
existing ones.  Maintenance  and navigation is via sub  menus for each
configuration.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6623 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-17 23:39:12 +00:00
Joe Taylor
da098e4a76 Starting to implement accumulation of reference spectrum.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6598 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-07 20:02:32 +00:00
Bill Somerville
2cfbb15b4f Rig control overhaul to implement generic Doppler shift tracking
The  concept of  a nominal  receive  and transmit  frequency has  been
introduced. This is  used as a base frequency  for Doppler correction,
frequency setting  and reporting. The  start up frequency is  now zero
which is  updated by the first  rig control status report.  This needs
more  work to  accommodate  calling frequency  plus working  frequency
operation as is used for random MS operation etc..

The  main  window  frequency  display  now  shows  the  transmit  dial
frequency while transmitting.

The mode changing logic sequence has been changed such that the rig is
correctly put  into and  taken out  of split mode  as required  by the
target mode.  This also  avoids the "other"  VFO having  its frequency
changed when  entering a mode that  does not use split  operating like
WSPR.

The main window  band combo box edit  may now be used to  input an kHz
offset  from the  current MHz  dial  frequency. This  is intended  for
setting  a sked  or working  frequency on  the VHF  and up  bands. For
example the working frequency for 23cms  might be set to 1296MHz and a
working  frequency of  1296.3MHz would  be selected  by selecting  the
23cms band  with the combo box  drop down list and  then entering 300k
into the band combo box edit widget.

When using JT4 modes a CTRL+Click on the waterfall adjusts the nominal
frequency such  that the frequency  clicked on  becomes the Tx  and Rx
frequency using  the fixed 1000Hz  DF that  JT4 modes use.   This will
probably be extended to all QSO modes when used in VHF & up mode. This
assumes that 1000Hz is an optimal DF  for both Tx and Rx and therefore
one  can "net"  to an  off frequency,  but visible  on the  waterfall,
caller with one click.

Improvements to OmniRig  rig control including use of  the serial port
control lines RTS or DTR, on the  CAT serial port used by OmniRig, for
PTT control.

Incrementing transaction sequence numbers added to messages to and from
the rig control  thread. This enables round trip status  to be tracked
and associated with a request. For  example a command that might cause
several  asynchronous  status  updates  can  now  be  tracked  in  the
originating thread such  that it is clear which updates  are caused by
executing the  request. This in turn  allows updates to be  held until
the request is complete i.e. the  state is consistent with the results
of the request.

Messages  to the  rig control  thread are  now posted  as a  new state
(Transceiver::TransceiverState) object. The  rig control thread tracks
requests and  actions any differences  between the prior  requests and
the new state.

The rig  control thread is now  stored on the  heap so that it  can be
closed down  and released as needed.  Along with this the  rig control
close  down  semantics  are  better defined  avoiding  some  potential
deadlock situations.

If the rig  is placed into split  mode it will be  reverted to simplex
mode when the rig connection is closed.

When  using direct  rig control  via Hamlib,  rigs that  have A/B  VFO
arrangements and  no method to query  the current VFO like  many Icoms
and  the Yaesu  FT-817/857/897(D)  series now  have smarted  frequency
updating requiring no  VFO changes when changing  the frequency.  This
is particularly  important when doing  Tx Doppler correction  to avoid
glitches.

The implementation  of emulated  split operating  mode ("Fake  It") is
simplified and improved.

A dummy  Hamlib transceiver for PTT  control on a separate  port is no
long instantiated if CAT or VOX PTT control is selected.

The resolution and  any rounding of the rig CAT  frequency set and get
commands is determined automatically  upon opening the rig connection.
This is needed to determine the  rate of frequency updates for Doppler
tracking. It also allows the rig to be more accurately controlled.

Frequency  calibration is  calculated separately  for the  receive and
transmit frequencies.

Whether  the  rig  modulation  mode  should be  controlled  is  now  a
constructor  argument rather  than  being passed  with individual  rig
control requests.

Doppler  shift  correction  is   considerably  enhanced  with  simpler
controls and much  better rig control.  A new mode  of tracking called
"receive only" is introduced for those with rigs that cannot be QSY:ed
via  CAT  when transmitting.   Such  rigs  have a  Doppler  correction
calculated  for the  middle of  the next  transmit period  just before
transmission starts. While  using Doppler tracking it  is now possible
to adjust the  sked frequency either using the new  kHz offset feature
of the main  window band combo box  or by directly tuning  the rig VFO
knob while holding down the CTRL key.

The astronomical data window that includes Doppler tracking control is
now opened  and closed using a  checkable menu item to  avoid it being
accidentally closed.

Debug  configuration  rig  control  diagnostic  messages  now  have  a
facility argument for clearer and more standardized trace messages.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6590 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-04-06 17:11:58 +00:00
Joe Taylor
de9ba371ac Improve two widget labels.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6560 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-03-25 20:56:29 +00:00
Joe Taylor
846ddf9039 1. Clean up GUI features releted to message averaging and deep search.
2. Make averaging and DS separately selecteble.
3. Clear nftt and avemsg on Clear Avg.
4. Allow fer65 to handle message averaging.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6543 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-03-21 16:03:11 +00:00
Bill Somerville
924e20efa8 Add a sample download dialog and upload sub-system
Samples are  downloaded from a  web server, currently the  SF download
server.   The samples  are  stored in  the  source controlled  samples
directory and the CMake script  there builds a suitable directory tree
for upload to the web  server under samples/web containing the samples
hierarchy and the  generated JSON contents database  file. The samples
CMake script also  defines an 'upload-samples' target  that uses rsync
to efficiently upload  the samples and the  accompanying contents JSON
database file.

Any directory structure under the samples directory may be created, to
add a new sample file simply add  the file to source control and amend
the list of sample files (SAMPLE_FILES) in samples/CMakeLists.txt.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6308 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-12-24 11:41:05 +00:00
Bill Somerville
1a23757b26 Reintegrate merge from wsjtx_exp branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6122 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-18 01:28:12 +00:00
Joe Taylor
caa51f4999 Display default_frequency (14.076 MHz) at startup, rather than
18446744073709551615 Hz.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6069 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-10 18:39:37 +00:00
Joe Taylor
4a38e03020 Add mw/W/kW values to the WSPR control for setting Tx power.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6068 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-10 18:11:06 +00:00
Joe Taylor
581577c421 Add Tool Tips for WSPR controls.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6066 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-10 14:19:22 +00:00
Joe Taylor
a7e2168532 Remove code associated with the unimplemented JT9W mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6061 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-11-09 17:19:48 +00:00
Bill Somerville
7ec4d1a109 Qt 5.5 compliance
The  header QMetaType  must now  be  included explicitly  if no  other
header includes QObject.

Adjust band  combo box  layout settings  to ensure  it is  rendered at
minimum content size otherwise it  stretches the signal meter width to
an ugly extent.

Also retired the "frequencies" settings  file key so that upgrades and
downgrades  between  1.5 and  1.6  no  longer require  rebuilding  the
working frequencies list.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5727 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-07-27 18:11:06 +00:00
Bill Somerville
1c8d8f749c Ensure that the WSPR Tx percentage is correctly initialized
Also tidied some code up.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5700 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-07-07 19:02:25 +00:00
Bill Somerville
45623b60b9 Only delete last .wav file on exit if it is not to be saved
Also enhanced  delete .wav  files menu  entry to  delete .c2  files as
well.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5672 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-07-03 17:33:05 +00:00
Bill Somerville
3dd824ad6b Make the main window more portable and font change capable
The Rx meter  is now a better  Qt citizen and can be  resized. Added a
more obvious peak signal indicator. It  is now a custom widget derived
from QFrame and is now directly added via promotion in Designer.

Added a custom  widget to act as  a letter spin box, this  is used for
sub mode control.  Switched the frequency tolerance widget  to a combo
box with preset  values so that it is more  uniform across systems and
font sizes.

Added container widgets  for group control of various  UI widgets such
as  QSO controls,  DX call  controls and  WSPR controls.  Introduced a
stacked widget to allow the WSPR controls to be swapped in in place of
the "QSO" controls. The "QSO" controls  are are the Rx, Tx and related
controls along with  the main tab widget with the  message buttons and
fields. This means  that the WSPR version of the  main window (and EME
Echo mode) are now much cleaner.

Increased the  size of the  rig control  widget and styled  its colour
using a dynamic property so that it  can be defined in the Designer UI
definition. Reinstated it  as a push button to do  a rig control reset
and retry after an error.

Reset most UI widgets to default properties, particularly removing any
fixed sizes so that they can resize freely when fonts are changed. The
overall layout is now controlled almost exclusively by stretch factors
on some of the rows and columns of the various grid layout managers.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5630 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-25 22:41:13 +00:00
Joe Taylor
0f4fe612d1 Increase tick interval on Pwr slider from 1 to 5 dB.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5586 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-11 15:56:14 +00:00
Bill Somerville
e1728a9674 Changed Tx Pwr attenator range to 45dB
This  is now  half way  between  the recent  change to  30dB when  the
formula was corrected  to voltage attenuation from power  and prior to
that.

Also corrected  formula for  the SoundOutput::attenuation  property to
use the correct voltage attenuation calculation.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5579 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-11 00:30:02 +00:00
Joe Taylor
a1329208c1 Code cleanups related to Echo mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5527 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-04 19:11:54 +00:00
Joe Taylor
437c8c5c3f Starting to add EME Echo mode. (Not yet functional!)
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5522 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-04 16:42:38 +00:00
Bill Somerville
f3930eb5c8 Polish the UI for WSPR and WSPR band hopping
Provide  a  dialog for  band  hopping  scheduling which  replaces  tab
four. Ensure that split mode is  not used for WSPR. Select the correct
tab  for WSPR  operation.  Shift WSPR  band hopping  code  out of  the
MainWindow class.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5517 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-04 01:45:40 +00:00
Bill Somerville
f200506571 Add mode dependent working frequencies
Working frequencies are mode dependent  and a reset to defaults button
has been added.

Also re-factored much of the model  and item delegate code to simplify
several  of the  model  implementations. Introduced  a single  routine
called from main to register the custom types with Qt.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5453 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-28 23:22:17 +00:00
Joe Taylor
e674ac4cb0 Better logic for WSPR scheduling. Don't overwrite a grid6 with grid4
obtained by double-clicking on a decode.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5452 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-28 22:58:24 +00:00
Bill Somerville
34f8924cfc Reintegrate the wsjtx_exp branch into the trunk
This  merge brings  the WSPR  feature development  into the  main line
ready for release in a future v1.6 release.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5424 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-27 13:08:28 +00:00
Bill Somerville
a51c5c4251 Reintegrate Joe's experimental VHF & up features
As at ^/branches/wsjtx_exp@5271



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5272 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-04-22 17:48:03 +00:00
Bill Somerville
2474f73b7b Improved next and current Tx message widget short cuts
Short cut  keys implemented via a  special key press event  handler do
not  fully  integrate  with  the UI  and  standard  UI  implementation
guidelines,  also they  introduce an  alternative code  path that  can
diverge from the intended behaviour.

Short  cuts   to  set  the  next   Tx  message  have  been   added  as
Ctrl+<number>.  Alt+<number>  short cuts  now do  as the  help implies
i.e. change  the current Tx message  even if there is  another message
being transmitted.

The log QSO  window should only be  triggered by a 73  Tx message when
transmitting.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4992 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-27 13:34:18 +00:00
Bill Somerville
7172533282 Make cursor an arrow pointer in activity widgets
The change  to use  QTextEdit in  read only mode  cause the  cursor to
become an I-beam type, this changes  it to the arrow pointer type that
the previous QTextBrowser used by default.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4959 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-13 15:38:46 +00:00
Bill Somerville
127c633a97 Bring colour settings into line with general configuration strategy
Colours behave  like other  configuration items  and changes  are only
applied when the Settings UI is dismissed via the "OK" button.

Simplified font settings and use  style sheets consistently to set the
application and decoded  text fonts. This is necessary  because any UI
widget that  has a style  sheet applied does not  honor a font  set by
QWidget::setFont()  even if  there is  no  font setting  in the  style
sheet, this is broken behaviour IMHO  but that is the way Qt currently
works.

Use a  style sheet to style  the frequency display and  clock. This is
necessary to  allow fonts to  be cascaded through parent  style sheets
and still be overridden on these widgets.

Simplify  the decoded  text  widgets,  there is  no  need  to use  the
QTextBrowser  as a  super class  since  the simpler  QTextEdit set  as
read-only is sufficient. Also removed  colour setting via a background
brush  as it  doesn't  work  and the  HTML  'bgcolor' attribute  works
correctly.

Change  to  UI  properties  of  the  decoded  text  widgets  to  allow
horizontal scrolling if required, this  allows larger fonts to be used
without truncating decoded messages.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4957 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-13 08:53:02 +00:00
Bill Somerville
c40cec50de Menu action to open the log directory
Since the log files have moved to  a hidden directory a menu action to
open the logs directory in a suitable system applicaiton is needed.

Added "Open log directory" to File manu bar pop up menu.

Merged from wsjtx-1.4 branch.




git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4471 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-10-04 11:47:03 +00:00
Bill Somerville
272aa2caae Revert "Gen msg" line edit to read/write status.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4415 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-30 20:59:21 +00:00
Bill Somerville
d4e55a093d Add local HTML help file to help menu.
So that a manual can be viewed without an Internet connection a second
manual action has been added to  the WSJT_X help menu. This shells out
to the default web browser with a local file target.

The build has been enhanced to install and package the current version
of the  HTML user manual  as downloaded from  the project web  site at
build time

The package  file locations have  been adjusted to be  compatible with
the QStandardPaths  class so that  its locate()  method can be  used to
portably access resources like this local help file

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4359 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-24 23:46:32 +00:00
Joe Taylor
966a433bea Back to "Settings...", etc., following discussion with G4WJS.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4214 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-07-24 16:58:58 +00:00
Joe Taylor
8b92cbb287 Replace the ellipses (...) on certain control labels.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4213 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-07-24 12:31:19 +00:00
Joe Taylor
1efa6e063e Minor tweaks to GUI appearance, etc.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4210 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-07-23 17:16:35 +00:00
Joe Taylor
cc482f260d Testing the UI mods suggested by W7DLG. Margin widths are reduced
to minimum in several places so that window contents extend to the
edges and widgets are packed more tightly.  Arguably this makes
better use of available screen space.

Comments will be appreciated!  If people don't like these changes,
they can be reverted.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4138 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-05-14 15:07:51 +00:00
Bill Somerville
2e8c4c4ec0 Improved free text macro functionality.
The macro edit  page in the settings dialog  now allows multiple items
to be selected in an extended selection.

The macro items can be rearranged  by drag and drop of single items or
whole selections.

The  delete button  and  context menu  item  will now  delete all  the
selected items.

The  free text  macro drop  down combo  boxes on  the main  screen now
automatically insert new  macros into the macros list  (at the end) if
the ENTER key is pressed while the combobox has focus.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4038 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-04-16 23:10:45 +00:00
Bill Somerville
f076c37c19 Made the soft keying CW wave shaper a CMake option (off by
default).

Reorganized Modulator interface so that it can control the stream
it writes to.

Make sure only QAudioOutput::stop is called at the end of sending
rather than QAudioOutput::reset which discards pending samples.

Added a quick close option to the Modulator::stop slot to discard
pending buffers if required.

Fix issue in CW synthesizer that was causing CW to be inverted
occasionally.

Made global arrays of symbols volatile because compiler waa
optimizing away reads in sound thread. These global variables
must go eventually as they are a multi-threading hazard.

Simplified TX sequencing to remove some duplicate signals.

Increased range of TX attenuator from 10dB to 30dB. This is mainly for
non-Windows platforms where the attenuator isn't linearized correctly.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3985 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-04-06 21:58:11 +00:00
Bill Somerville
9247e10115 Added support for use of "Standard" locations for writable files.
This allows  writable files  to be  located in  the "correct"
         location for  each platform rather  than in the  directory of
         the  executable  which, in  general,  is  not recommended  or
         allowed in some cases.

         A preprocessor macro  WSJT_STANDARD_FILE_LOCATIONS is used to
         switch be tween old and new functionality, currently it is on
         by default.  It  can be turned off by defining  it to a false
         value (0)  or more simply  with cmake-gui setting  the option
         with  the same  name.  JTAlert  can  only work  with the  old
         non-standard file  locations until  Laurie VK3AMA  chooses to
         support the new file locations.

         Even  if the  above is  not  enabled; the  QSettings file  is
         written to a  user specific location so it will  be shared by
         all instances  of the  program (i.e.  across  upgrades).  See
         below for multiple concurrent instance support changes.

Added a command line parser module for Fortran.

         Added 'lib/options.f90'  to facilitate more  complex argument
         passing to jt9 to cover explicit file locations.

Changed the way multiple concurrent instances are handled.

         This is  to allow the program  to be run multiple  times from
         the same installation directory.

         A new wsjtx command line  optional argument is available "-r"
         or  "--rig"   which  enables  multiple   concurrent  instance
         support.  The  parameter of the  new option is a  unique name
         signifying  a rig  or equivalent.   The name  is used  as the
         shared memory segment key and  in window titles.  The name is
         also used to  access unique settings files  and writable data
         files like ALL.TXT  and log files.  No attempt  has been made
         to share these files between concurrent instances.

         If  "-r" or  "--rig" is  used  without a  parameter it  still
         enables  multiple   concurrent  instance  support   for  that
         instance.  All instances must use  a unique parameter, one of
         which may be empty.

         The        rig       name        is       appended        the
         QCoreApplication::applicationName() for convenient usage like
         window titles.

Set non Qt locale to "C".

         This ensures that C library functions give consistent results
         whatever the  system locale is set  to.  QApplication follows
         the system locale as before.  Thus using QApplication and its
         descendants  like widgets  and QString  for all  user visible
         formating will give correct l10n and using C/C++ library will
         give consistent formatting across locales.

Added top level C++ exception handling to main.cpp.

         Because  the   new  transceiver  framework   uses  exceptions
         internally, the main function now handles any exceptions that
         aren't caught.

Retired devsetup, replaced with Configuration.

         Configuration  is  a  class  that encapsulates  most  of  the
         configuration  behavior.   Because  rig configuration  is  so
         closely coupled with rig operation, Configuration serves as a
         proxy  for   access  to  the  rig   control  functions.   See
         Configuration.hpp  for  more  details  of  the  Configuration
         interface.

Menu changes.

         Various checkable  menu actions moved  from main menu  to the
         Configuration  dialog.   The  whole settings  menu  has  been
         retired with  the single  "Settings..."  action moved  to the
         file  menu  for  consistency  on  Mac  where  it  appears  as
         "Preferences" in line with Mac guidelines.

New data models for data used by the application.

         ADIF amateur band parameters,  free text message macros, spot
         working   frequencies  and,   station  information   (station
         descriptions and transverter offsets per band) each implement
         the  QAbstractItemModel interface  allowing them  to be  used
         directly with  Qt view widgets  (Bands.hpp, FrequencyList.hpp
         and, StationList.hpp).  Configuration  manages maintenance of
         an instance of  all but the former of the  above models.  The
         ADIF band  model is  owned by  Configuration but  requires no
         user maintenance as it is immutable.

Band combo box gets more functionality.

         This  widget is  now an  editable QComboBox  with some  extra
         input capabilities.

         The popup list is still the list of spot working frequencies,
         now  showing the  actual  frequency decorated  with the  band
         name.  This  allows multiple  spot frequencies  on a  band if
         required.

         The  line edit  allows direct  frequency entry  in mega-Hertz
         with  a completer  built  in to  suggest  the available  spot
         working frequencies.   It also  allows band name  entry where
         the  first  available  spot working  frequency  is  selected.
         Recognized band names are those  that are defined by the ADIF
         specification and  can be found  in in the  implementation of
         the ADIF bands model (Bands.cpp).

         If an out of band frequency  is chosen, the line edit shows a
         warning red  background and the  text "OOB".  Out of  band is
         only defined  by the  ADIF band limits  which in  general are
         wider than any entities regulations.

Qt 5.2 now supports default audio i/p and o/p devices.

         These devices are placeholders  for whatever the user defines
         as the  default device.   Because of  this they  need special
         treatment as  the actual device  used is chosen at  open time
         behind the scenes.

Close-down behavior is simplified.

         The close-down  semantics were broken such  that some objects
         were not being shut down cleanly, this required amendments to
         facilitate correct close down of threads.

User font selection added to Configuration UI.

         Buttons to set the application font and the font for the band
         and  Rx frequency  activity widgets  have been  added to  the
         Configuration UI to replace the file based font size control.

Free text macros now selected directly.

         The free text line edit  widgets are now editable combo boxes
         that have  the current free  text macro definitions  as their
         popup  list.   The old  context  menu  to  do this  has  been
         retired.

Astronomical data window dynamically formatted and has font a chooser.

         This window is now autonomous,  has its own font chooser and,
         dynamically resizes to cover the contents.

Double click to Tx enabled now has its own widget in the status bar.

QDir used for portable path and file name handling throughout.

The  "Monitor", "Decode",  "Enable  Tx" and,  "Tune"  buttons are  now
checkable.

         Being checkable allows these  buttons control their own state
         and rendering.

Calls to PSK Reporter interface simplified.

         In   mainwindow.cpp  the   calls   to   this  interface   are
         rationalized to just 3 locations.

Manipulation of ALL.TXT simplified.

         Moved, where possible, to common functions.

Elevated frequency types to be Qt types.

         Frequency  and FrequencyDelta  defined as  Qt types  in their
         meta-type system  (Radio.hpp).  They  are integral  types for
         maximum accuracy.

Re-factored rig control calls in mainwindow.cpp.

         The new  Configuration proxy  access to rig  control required
         many changes  (mostly simplifications) to the  MainWindow rig
         control code.  Some  common code has been  gathered in member
         functions   like   qsy(),   monitor(),   band_changed()   and
         auto_tx_mode().

Rig control enhancements.

         The  rig control  for  clients interface  is  declared as  an
         abstract    interface   (See    Transceiver.hpp).    Concrete
         implementations of this interface are provided for the Hamlib
         rig  control library,  DX Lab  Suite Commander  via a  TCP/IP
         command channel, Ham  Radio Deluxe also via  a TCP/IP command
         channel and, OmniRig via its Windows COM server interface.

         Concrete Transceiver implementations are expected to be moved
         to a separate thread after construction since many operations
         are blocking  and not suitable  for running in a  GUI thread.
         To facilitate this all  instantiation of concrete Transceiver
         instances are handled by  Configuration using a factory class
         (TransceiverFactory)   for   configuration  parameter   based
         instantiation.

         Various   common  functionality   shared  by   different  rig
         interface implementations  are factored out into  helper base
         classes that  implement or delegate parts  of the Transceiver
         interface.  They  are TransceiverBase  which caches  state to
         minimize expensive rig commands, it also maps the Transceiver
         interface  into a  more  convenient  form for  implementation
         (template methods).  PollingTransceiver that provides a state
         polling   mechanism  that   only   reports  actual   changes.
         EmulateSplitTransceiver  that  provides  split  operation  by
         QSYing on PTT state changes.

         EmulateSplitTransceiver can  be used with  any implementation
         as  it follows  the GoF  Decorator pattern  and can  wrap any
         Transceiver implementation.

         OmniRigTransceiver is  derived directly  from TransceiverBase
         since  it doesn't  require  polling due  to its  asynchronous
         nature.  OmniRigTransceiver is only built on Windows as it is
         a COM server client.  To build  it you must first install the
         OmniRig     client     on     the     development     machine
         (http://www.dxatlas.com/omnirig/).

         DXLabSuiteCommanderTransceiver          derives          from
         PollingTransceiver since  it is a  synchronous communications
         channel.   No  third  party  library  is  required  for  this
         interface.

         HRDTransceiver also derives from PollingTransceiver.  The HRD
         interface  library has  been  reverse  engineered to  provide
         functionality with  all available versions of  HRD.  No third
         party libraries are required.

         HamlibTransceiver  likewise  derives from  PollingTransceiver
         since  the Hamlib  asynchronous interface  is non-functional.
         Although this  class will interface with  the release version
         of Hamlib (1.2.15.3);  for correct operation on  most rigs it
         needs to  run with the  latest master branch code  of Hamlib.
         During development many changes to Hamlib have been submitted
         and accepted,  hence this requirement.  Hamlib  source can be
         obtained from git://git.code.sf.net/p/hamlib/code  and at the
         time of writing he master branch was at SHA 6e4432.

         The Hamlib interface directly calls the "C" interface and the
         modified rigclass.{h,cpp} files have been retired.

         There is a rig type selection of "None" which may be used for
         non-CAT  rigs, this  is actually  a connection  to the  dummy
         Hamlib device.

         PollingTransvceiver   derives    from   TransceiverBase   and
         TransceiverBase derives from the Transceiver interface.

         Each interface implementation offers  some possibility of PTT
         control via  a different serial  port than the CAT  port.  We
         also support PTT  control directly via a  second serial port.
         This is done  by delegating to a dummy  Hamlib instance which
         is   only   used   for   PTT  control.    This   means   that
         DXLabSuiteCommanderTransceiver,       HRDTransceiver      and
         OmniRigTransceiver  always  wrap  a  dummy  HamlibTransceiver
         instance.  The  factory class TransceiverFactory  manages all
         these constructional complexities.

         Serial port  selection combo  boxes are  now editable  with a
         manually  entered value  being  saved to  the settings  file.
         This allows  a non-standard  port device  to be  used without
         having to edit the settings file manually.

         For TCP/IP  network CAT  interfaces; the network  address and
         port  may  be specified  allowing  the  target device  to  be
         located on a different machine  from the one running wsjtx if
         required.  The  default used when  the address field  is left
         blank is the correct one for normal usage on the local host.

         Selecting a polling  interval of zero is  no longer possible,
         this  is because  the rig  control capability  can no  longer
         support one way connection.  This  is in line with most other
         CAT control software.

         In the Configuration dialog there are options to select split
         mode  control  by  the  software  and  mode  control  by  the
         software.  For  the former  "None", "Rig"  and "Fake  it" are
         available,  for  the latter  "None",  "USB"  and, "Data"  are
         available.  Because  tone generation is implicitly  linked to
         split mode  operation; it is  no longer possible to  have the
         software in split  mode and the rig not or  vice versa.  This
         may mean some rigs cannot be used in split mode and therefore
         not in dual JT65+JT9 until  issues with CAT control with that
         rig are  resolved.  Single  mode with VOX  keying and  no CAT
         control are still possible so even the most basic transceiver
         setup is supported as before.

         Configuration now  supports a  frequency offset  suitable for
         transverter   operation.     The   station    details   model
         (StationList.hpp) includes  a column  to store an  offset for
         each band if required.

CMake build script improvements.

         The CMakeLists.txt from the  'lib' directory has been retired
         with its  contents merged into the  top level CMakeLists.txt.
         Install  target support  has been  greatly improved  with the
         Release build  configuration now building a  fully standalone
         installation  on Mac  and Windows.   The Debug  configuration
         still   builds   an   installation   that   has   environment
         dependencies for  external libraries, which is  desirable for
         testing and debugging.

         Package target  support is largely complete  for Mac, Windows
         and, Linux, it should be possible to build release installers
         directly from CMake/CPack.

         Cmake FindXXXX.cmake  modules have been added  to improve the
         location of fftw-3 and Hamlib packages.

         Version numbers are now stored in Versions.cmake and work in
         concert with automatic svn revision lookup during build.  The
         version string becomes 'rlocal'± if there are any uncommitted
         changes in the build source tree.

Moved resource like files to Qt resources.

      	 Because location of resource files  (when they cannot go into
      	 the  installation directory  because of  packaging rules)  is
      	 hard to standardize.  I have used the Qt  resource system for
      	 all ancillary data files. Some  like kvasd.dat are dumped out
      	 to the temp (working directory)  because they are accessed by
      	 an external program, others like the audio samples are copied
      	 out so  they appear in  the data directory under  the default
      	 save directory.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-26 13:21:00 +00:00
Joe Taylor
86591544f0 Merge changes from branches/wsjtx_w back into branches/wsjtx.
Note to developers: Not sure about the makefiles...


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3835 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-03-05 18:20:40 +00:00
Joe Taylor
9fe39ee2ba Tweak labels Tx=Rx, Rx=Tx to Tx<Rx, Rx<Tx.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3782 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-02-20 13:56:46 +00:00
Joe Taylor
39effefb2f Reposition several controls on main window.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3777 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-02-19 01:32:05 +00:00
Joe Taylor
f7e39a2009 1. Add "Utility Programs" section to User's Guide.
2. Change "Appendix x" section headings to useful descriptions.
3. Add KB1ZMX and W4TI to the WSJT-X "About" screen and Acknowledgments 
   in the User's Guide.  (Hope I didn't forget anyone -- please advise 
   if I did!)
4. A few more minor tweaks to User's Guide



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3672 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-30 18:03:21 +00:00
Joe Taylor
784e246557 1. Fix a bug that could cause decoder to hang when presented with
bad data.

2. Fix a bug that could allow a Koetter-Vardy false decode instead of
a valid Berlekamp-Massey decode, sometimes leading to program crash.

3. Many more edits in the User's Guide, *.adoc files.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3664 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-27 21:28:54 +00:00
Murray Curtis
13dba2b1ba 1. Decoded text should now remain left justified even if the font is too large for the window
2. The main window can be expanded wider to allow those with large screens to use larger fonts
3. New class DecodedText handles the formatted text from decoder.f90.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3564 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-08-25 01:48:45 +00:00
Joe Taylor
4e0032ca8e Oops! It seems that I mistakenly inverted the gain slider control for
audio input.  It's fixed now.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3547 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-08-12 13:43:45 +00:00
Joe Taylor
d06f0d88af Remove PSKReporter.h, it's no longer used.
Make the two sliders on main window have similar appearance.
Remove unused #ifdef block.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3546 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-08-11 13:31:51 +00:00
Bill Somerville
4f4c535c4e Added audio channel support.
Audio input can be mono, left of stereo pair or, right of stereo
pair. Audio output can be mono, left of stereo pair, right of stereo
pair or, both of stereo pair (the same output goes to both channels in
both mode). Settings are remembered between sessions.

Stream channel suport is implemented mainly in the new AudioDevice
class which is now the base class of Modulator and Detector.

Audio channels are selected on the configuration screen. Only
supported channel configurations per device can be selected.

Audio output volume (actually attenuation) is now possible from the
GUI. I have added a slider control to the main window; I don't
necessarily propose this as a final release location for the widget as
I understand that changes to the main screen are sensitive. This
location is just a starting suggestion for a trial. The volume
(attenuation) setting is remembered between sessions and is not device
dependent. This addresses all issues of volume setting on *nix
versions since there is no need to use pavucontrol to set audio
levels. The volume (attenuation) action is logarithmic.

Shaped CW keying has been implemented in Modulator although it is
currently disabled as I am not 100% happy wth the implementation. If
you want to try it define the C++ preprocessor macro WSJT_SOFT_KEYING
in your build.

The Modulator instance has been moved to the same thread as the
SoundOutput instance as it should have been since the output callback
already operates in that thread. Cross thread slots are now correctly
called in a thread safe way as a result.

A number of files where in the SVN repository with DOS line endings
which I have removed. SVN users on Windows need set the config for
native line endings so that DOS line endings are automatically
stripped on checkin.

The DevSetup class now holds it's UI o the heap to reduce imapact on
build dependencies.

The application settings are now passed to objects from the main.cpp
file. Management of settings are moved to the responsible classes (top
level windows). This has involved a few settings moving groups so
users will see some settings reverting to default values on the first
run of an update.

Persistance of top level windows geometry and position is now handled
in the recommened manner (constructor for load, closeEvent for store
in modal windows and, hideEvent for store in modeless dialogs).

The MainWindow class now holds its children as members rather than
global variables.

The LogQSO class now hides its implementation and takes responsibility
for its own settings and widows rendering parameters. A new settings
file group is implemented to persist the LogQSO class settings.

The WideGraph class now hides its implementation and manages its own
settings and window rendering parameters.

  --This line, and those below, will be ignored--

M    Modulator.cpp
M    rigclass.cpp
M    widegraph.cpp
M    signalmeter.cpp
M    soundin.cpp
M    soundout.cpp
M    mainwindow.h
M    main.cpp
M    meterwidget.h
M    devsetup.cpp
M    mainwindow.ui
M    Detector.cpp
M    logqso.h
M    rigclass.h
M    mainwindow.cpp
M    meterwidget.cpp
M    soundin.h
M    devsetup.ui
M    wsjtx.pro
M    devsetup.h
M    logqso.cpp
M    Modulator.hpp
M    psk_reporter.cpp
M    killbyname.cpp
M    Detector.hpp
M    signalmeter.h
M    widegraph.h
M    psk_reporter.h
M    soundout.h
M    PSKReporter.h
M    lib/afc65b.f90
M    lib/gran.c
M    lib/usleep.c
M    lib/afc9.f90
M    lib/wrapkarn.c
A    AudioDevice.hpp


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3542 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-08-10 15:29:55 +00:00
Joe Taylor
a8acd97f42 1. Correct bug that prevented save/restore of Wide Graph geometry.
2. Fix jt9 so that decoding starts at fStart (which now may be non-zero).
3. Improved or new Tool Tips for some GUI controls.
4. Updates to User's Guide.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3540 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-08-09 17:22:08 +00:00
Murray Curtis
c0ce066408 Logbook:
-changed log to hash table for faster lookup
  -improved ADIF compatibility
mainwindow.ui
  -fixed typo in menu entry



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3538 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-08-08 23:51:53 +00:00
Joe Taylor
67be0a1032 New flexibility for defining and selecting the waterfall palette.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3528 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-08-07 14:49:45 +00:00
Joe Taylor
68bc032830 A number of minor cleanup efforts:
1. F1 accesses User's Guide for v1.2.
2. Larger font for "S" on the ui->readFreq button.
3. Finish removing the no-longer-used #ifdef's relaied to psk_reporter calls.
4. Set m_ntx=6 (Tx message #6) at program startup.
5. Remove obsolete file soundin_1.cpp.
6. Update credits displayed in the "About" window and in User's Guide.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3527 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-08-06 17:22:33 +00:00
Murray Curtis
a8491db120 First version of DXCC entity and worked B4 status
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3512 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-07-31 11:29:42 +00:00
Joe Taylor
43a4b8b150 Add another waterfall palette, "Gray1".
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3504 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-07-25 19:25:39 +00:00
Joe Taylor
3035edab05 Implement a user option to set font sizes.
Updates to User's Guide.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3501 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-07-24 19:07:57 +00:00
Murray Curtis
5d64092a1c Band settings with multiple antenna descriptions for PSK reporter
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3499 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-07-23 10:28:22 +00:00
Joe Taylor
fb7948a836 Full activation of "Multiple Instances", thanks to some code by
Josh Rovero, KK1D.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3495 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-07-19 00:23:40 +00:00
Joe Taylor
f10ef57c7d 1. Double-click on a yellow Tx message should not copy the message again,
and if CTRL is held down it should set Tx as well as Rx freq.  Fixed.
2. Improve the logic for suppressing duplicate JT65 decodes.
3. Disable the "Advanced" item on Setup menu.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3491 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-07-17 14:18:18 +00:00
Edson W. R. Pereira
d9f88d9632 Added new meter widget.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3489 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-07-16 21:16:57 +00:00