d899d844a6
MSK144 should auto sequence only when the box is checked.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7142 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-03 01:20:15 +00:00
7cc9720462
Don't send decodes from disk data to PSKreporter.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7141 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-02 23:41:41 +00:00
5c6874db58
MSK144 mode: minimum Ftol=20; report received copied to Log screen; spots sent to PSKreporter.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7140 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-02 23:16:47 +00:00
4fac7306dd
First steps toward realtime short ping decoder for MSK40.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7139 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-02 01:43:31 +00:00
eeb01707b9
Make RxFreq step size 10 Hz in MSK144 mode.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7138 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-02 01:14:35 +00:00
07b44e42d8
1. Initialize m_msg[0][0] to stop garbage decode right after startup. 2. Decouple RxFreq spinbox from printed/decoded frequency. 3. Limit RxFreq to 25 Hz steps in the range [1400,1600] when in MSK144 mode.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7137 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-02 00:23:09 +00:00
c4310adac5
Back out some changes that were broken. PSK reporter not yet functional for MSK144.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7136 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-01 20:10:46 +00:00
ddc8eb8c4c
Oops! Committed wrong versions. This code is not ready for use!
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7135 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-01 19:40:26 +00:00
58078d261c
1. Allow Ftol down to 20 Hz in MSK144 mode.
...
2. Do not adjust Rx Freq automatically after an MSK144 decode.
3. Insert the Rcvd report in log window.
4. Send MSK144 decodes to PSK Reporter.
NB: not all these are fully tested, yet.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7134 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-01 19:32:16 +00:00
206e43d2fd
Try to squash double-decodes and gibberish prints.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7133 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-01 18:13:39 +00:00
a5dec684d9
Storage for cdat2 must be on a "per thread" basis.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7132 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-01 01:30:41 +00:00
98fb552e08
Delete unused nav(6) array in mskrtd. Minor fix to command-line tool msk144d2.f90.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7131 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-10-01 00:05:20 +00:00
e6e81fbeb3
Fix a crash which appears to be a stack size limitation
...
This issue was probably triggered by OpenMP forcing some large arrays
onto the stack where Fortran might normally make them static. The
change that seemed to make the difference was putting cdat2 in
msk144_freq_search into static storage. I am not convinced that the
problem is really solved but it works for now.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7130 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-30 23:32:01 +00:00
6710c2f4ca
Update msk144d2 to work with recent changes in genmsk144.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7129 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-30 21:09:28 +00:00
986b479172
Make new OpenMP code compile without OpenMP support
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7128 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-30 16:59:18 +00:00
f98fc81bf1
Simplify the multi-threading code in msk144sync().
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7127 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-30 16:52:16 +00:00
5b5d4ecb7c
Multi-threaded real-time MSK144 decoder. Needs further testing!
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7126 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-30 15:56:55 +00:00
7a2ce1e29a
This should have been committed with r7121.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7125 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-30 15:55:53 +00:00
621c3a69f7
Fix broken non-Windows builds.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7124 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-30 14:47:25 +00:00
508236a31a
Disable OpenMP in msk144sync. As initially coded it's no improvement.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7123 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-29 23:44:24 +00:00
e7b77214f9
Enable OpenMP for everything except on Macs
...
Also increase Windows stack size from 1Mbyte to 8Mbyte due to the
impact of Fortran arrays not being automatically moved to static
storage above a certain size. This needs attention by setting the SAVE
attribute on large arrays that do not need to be on the stack i.e. do
no need to be duplicated across OpenMP thread teams.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7122 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-29 22:45:58 +00:00
cca0a83771
Implement "R FN20", etc., in contest-mode MSK144 messages. (Tx only, so far!)
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7121 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-29 20:24:45 +00:00
8e4dc78561
Correct two constants used in msk144sync.f90.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7120 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-29 17:37:03 +00:00
cc7224d361
Minor cleanup; add some !$OMP stuff to msk144sync.f90, but it's not yet functional.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7119 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-29 16:39:14 +00:00
ad68032b36
Revise some comments. No code changes.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7118 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-29 15:35:45 +00:00
4e94fcdc4a
Minor code cleanup.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7117 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-29 14:46:12 +00:00
7758d4cbd7
Add a performance monitor for real-time MSK144 decoding.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7116 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-29 13:29:20 +00:00
01de82fc03
Drop Fast and Normal decoding depths down one notch.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7115 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-29 03:01:32 +00:00
5fbe144008
Wire up Fast/Normal/Deep decoding options for MSK144.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7114 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-28 22:13:07 +00:00
ec550ecc43
Send ndepth (value = 1, 2, or 3) to hspec(). MSK144 click-to-decode now calls
...
the old fast_decode(); probably it should call hspec() instead?
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7113 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-28 20:41:41 +00:00
36ae5865a5
Progress toward full implementation of real-time decoding of MSK144.
...
I believe file saving and auto-sequencing nor work. Not sure about posting
to PSK reporter: please check.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7112 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-28 19:08:19 +00:00
1b9f043087
Make frequency search more efficient in msk144 realtime decoder.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7111 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-25 20:37:30 +00:00
c05cf2438d
Make msk144spd properly track the RxFreq spinbox.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7110 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-25 12:53:07 +00:00
68951558d4
MSK144:
...
1. Clean up mskrtd to remove unused variables.
2. Re-instate Rx frequency spinbox in MSK144 mode to allow decoding of off-frequency signals with small FTol. Make changes needed to pass Rx Freq in to fortran routines.
3. Enable realtime decoder for testing. Auto sequence does not yet work when realtime decoding is enabled. There are probably other bugs as well.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7109 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-25 00:16:29 +00:00
5b5915a024
New short ping decoding algorithm for msk144 realtime decoder. Not yet enabled.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7108 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-23 22:28:11 +00:00
665b8dc85a
More work on real-time decoder for msk144.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7107 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-22 19:42:05 +00:00
ed6620f424
Add new routines associated with msk144 real-time decoder.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7106 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-22 00:04:43 +00:00
97ff11f635
More work on real time decoder.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7105 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-22 00:03:44 +00:00
07ceefb8a4
Fix what I broke.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7104 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-20 22:51:06 +00:00
4684df897c
Remove diagnostic write.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7103 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-20 20:47:29 +00:00
7979794933
Add new routines to CMakeLists.txt.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7102 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-20 20:24:03 +00:00
940df9d3a7
Add command-line routine to test real time msk144 decoding.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7101 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-20 20:22:48 +00:00
3ceeb73fd6
Move decoding of synced frame into a subroutine.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7100 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-20 20:21:24 +00:00
e3f1eb82f6
Temporarily disable the cbRealTime checkbox.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7099 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-20 16:37:39 +00:00
caf9e18409
Add real-time decode routine.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7098 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-20 16:35:00 +00:00
fe98777cfe
Implement real-time decoding in MSK144 mode, for testing.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7097 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-20 16:25:25 +00:00
8d38566225
Too much spectral smoothing? Omit call to smo121.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7096 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-18 15:34:15 +00:00
46902eb42a
Decrease execution time of the most time-consuming loop in opdetmsk144.f90.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7095 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-17 22:59:21 +00:00
8becb1defc
More work on opdetmsk144.f90 - clean up, generalize it a bit, and fix printed time estimate.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7094 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-17 21:22:00 +00:00
869b3df04a
Reconfigure mainwindow GUI properly after MSK144 -> WSPR -> MSK144.
...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7093 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-09-17 15:32:01 +00:00
Steven Franke
Joe Taylor
Bill Somerville