Commit Graph

3140 Commits

Author SHA1 Message Date
Joe Taylor
f30311f324 I throw in the towel. Prompt to log QSO when *either* RRR or 73 is sent.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7431 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-30 19:04:51 +00:00
Joe Taylor
f98aa4e6f4 Options (via Ctrl+M) to minimize size of Main Window and Wide Graph; add separate Start/End times to logging information. Thanks to W9MDB!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7430 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-30 15:45:31 +00:00
Joe Taylor
b7309f1d36 1. No 2 kHz frequency offset for JT9 on 60m band.
2. Don't update the "Last Tx" message until current transmission is complete.
These suggestions from W9MDB.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7429 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-29 18:08:32 +00:00
Steven Franke
9c3b30d927 Fix a bug in analytic.f90 and enable amplitude flattening. This version is not intended for general use on MSK144 as it uses hardwired coefficients derived for use with a specific radio.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7428 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-29 01:52:55 +00:00
Steven Franke
5ba225f0af Decrease number of frames that must be averaged for valid dynamic equalization.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7427 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-27 14:30:00 +00:00
Joe Taylor
d2fb561f10 Add "Clear reference spectrum" to the File menu.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7426 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-24 20:05:28 +00:00
Joe Taylor
a45a4d710b Make the Tx# buttons narrower.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7425 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-23 18:59:37 +00:00
Joe Taylor
df35f519df 1. As a test, zap any data at start if id2() that appears to be a T/R transient.
2. Send emedelay (now 0 or 2.5) to QRA64 decoder.
3. Tweaks to sync64, making it better for QRA64A.
4. Mainwindow MessageBox if it attempts to open a file with wrong format.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7424 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-22 20:51:27 +00:00
Steven Franke
873d481458 Add -r (Rx Equalize) option to command-line MSK144 decoder.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7423 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-22 18:17:23 +00:00
Steven Franke
353c2bb4c3 Tweaks.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7422 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-22 17:36:03 +00:00
Steven Franke
02a4cb95a4 Add an option on advanced time to enable MSK144 Rx filter equalizer. Other changes necessary to accommodate coexistence of static (Rx Filter) and dynamic (QSO partner-dependent) phase corrections.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7421 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-22 17:21:23 +00:00
Joe Taylor
80e594d7b8 Back out the temporary changes for WSPR-15 in r7418 and 7419.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7420 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-22 14:24:56 +00:00
Joe Taylor
9e97dcf942 Allow WPR-15 Tx audio freq up to 1625 Hz.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7419 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-21 20:31:30 +00:00
Joe Taylor
b0e738b1f2 Test code: starting to implement WSPR-15. Not for general use!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7418 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-21 20:26:49 +00:00
Joe Taylor
a92f9c3cc1 Add code to make wsprcode functional. (NB: most of these routines are otherwise
obsolete; they come from WSPR 2.0, etc.)


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7417 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-21 18:50:18 +00:00
Steven Franke
4c7fd5d5c0 Define a default mygrid in the command line MSK144 decoder.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7416 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-21 16:04:08 +00:00
Joe Taylor
344936a315 No need to truncate the decoded text line going to ALL.TXT.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7415 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-20 21:35:16 +00:00
Joe Taylor
ec7e099cf8 Further adjustments to sync64; extend QRA64 data length to 54 s; some code cleanup.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7414 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-20 21:27:23 +00:00
Joe Taylor
c3b52ab787 Remove the QRA64 test on sync2 -- it was not helpful.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7413 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-20 14:09:45 +00:00
Steven Franke
e4c5811ac3 Changes needed to accommodate channel equalization implemented in the new msk144signalquality.f90. Warning - msk144signalquality writes to the executable directory.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7412 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-20 03:01:43 +00:00
Steven Franke
f9e6c89847 Calculates # of bit errors and eye-opening on every call, estimates channel phase on startup and whenever DX Call changes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7411 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-20 02:53:57 +00:00
Steven Franke
c1a0fe3d27 Make the command-line MSK144 decoder work again.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7410 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-20 02:49:22 +00:00
Joe Taylor
d9f120c967 I was too strict on the sync2 and width limits. This is much better for QRA64E!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7407 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-19 20:14:31 +00:00
Bill Somerville
7dbcc1ba4a Main line returns to development status
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7406 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-19 20:12:27 +00:00
Bill Somerville
8189c437a0 Adjust splash screen for GA release
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7403 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-19 03:18:38 +00:00
Bill Somerville
e690f453f8 Prep for v1.7.0 GA
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7401 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-19 02:54:43 +00:00
Bill Somerville
9905a58f74 Make the user guide images path absolute
The current  Linux asciidoctor-fopub seems  to use relative  paths for
the imagesdir  asciidoctor attribute incorrectly when  generating PDFs
so this makes it based on the docdir attribute which is absolute.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7400 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-19 01:20:11 +00:00
Bill Somerville
b6006dacca Correctly extract grid from reply to tailender in MSK144 contest exchange
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7399 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-18 22:20:07 +00:00
Joe Taylor
2b5dc480f9 Update the Tool Tip for Contest Mode checkbox.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7398 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-18 20:12:19 +00:00
Joe Taylor
d98253f3c8 Enable Sh (for Tx4 and Tx5 only) in MSK144 Contest Mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7397 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-18 18:31:48 +00:00
Joe Taylor
3220578bc4 In MSK144, if a received grid is not in one's own hemisphere display it
as "R grid2", where grids2 is the antipodes -- even if the receiver is
not in Contest mode.  This seems safe enough...


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7396 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-18 02:54:23 +00:00
Joe Taylor
1fe6c4e375 Make Contest Mode messages properly readable by anyone in the sender's
hemisphere.  Add Contest Mode info to User Guide.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7395 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-18 02:46:04 +00:00
Joe Taylor
a125657803 If status of Contest Mode is changed, re-generate the standard MSK144 messages.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7394 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-17 21:48:14 +00:00
Joe Taylor
33af88a41b Complete the implementation of MSK144 contest mode. Needs testing!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7393 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-17 21:18:47 +00:00
Joe Taylor
e23ebc48ad Don't freeze the Tx5 message if use has double-clicked on a decode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7392 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-17 15:19:48 +00:00
Steven Franke
794e6ada00 Fix a wsprd bug that was introduced in r7090, which attempted to fix encoding of callsigns like 5N/6O0O.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7391 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-17 06:41:07 +00:00
Bill Somerville
74bfc17ebd Fix WSPR c2 file writing
Inverted error check skipped writing of the contents.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7390 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-17 00:06:22 +00:00
Bill Somerville
336eb0c858 Add fast mode support to UDP messages and update example apllications
Sub mode and  fast mode flag are  added to the UDP  Status message and
Status messages  after appropriate UI changes.  MSK144 decodes produce
UDP Decode messages. Fast JT9 messages are treated similarly.

Currently ISCAT decodes are not posted  as UDP Decode messages as they
do not fit well with the model.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7389 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-16 19:36:21 +00:00
Joe Taylor
f7935361b3 Install G3WDG changes to make jt4sim use the same fast fading model as qra64sim.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7388 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-16 18:51:53 +00:00
Joe Taylor
1de0689d4b Another tweak to User Guide. Disable Deep Search and Averaging if VHF features is turned off.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7387 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-16 17:14:00 +00:00
Joe Taylor
556ef6dce3 Additions and corrections to User Guide in preparation for v1.7 GA release.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7386 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-16 16:26:01 +00:00
Joe Taylor
3b1e9c1e6c Extend the Rx period in QRA64 mode to 53.5 s; an improved label on Settings -> General tab.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7385 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-16 16:25:07 +00:00
Joe Taylor
54a15db832 Minor tweaks to User Guide.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7384 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-15 20:09:06 +00:00
Joe Taylor
8ff9cb01b2 Remove JT9/JT65 decoding statistics from timer.out. Remove the auto_tx_label, it's not really needed.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7383 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-15 18:58:17 +00:00
Joe Taylor
4a132c59ee Remove diagnostic write to LU 83.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7382 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-15 18:46:30 +00:00
Joe Taylor
d3ee8af01b Many adjustments to QRA64 decoder. Best performance yet on the 114 benchmark files.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7381 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-15 18:42:33 +00:00
Bill Somerville
17436a7b43 Fix Qt version compatibility compile issue
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7380 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-12 18:26:06 +00:00
Bill Somerville
440559f0c3 Fix various sample downloader issues especially server redirect handling
Thanks to Mike W9MDB for the concept  of forcing to HTTP if OpenSSL is
not installed or if the user requires it for other reasons.

The sample  downloader should  now be usable  with or  without OpenSSL
libraries being  installed, so long  as SourceForge continue  to serve
identical  content from  both HTTP  and  HTTPS schemes  on their  file
servers and mirrors.

For users with baulked  OpenSSL installations, incorrect or incomplete
CA  certificate  stores,  either  the improved  capability  to  ignore
SSL/TLS errors for  the duration of a session at  their discretion or,
as a last resort a new option to force an HTTP URL scheme is provided.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7379 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-11 21:19:31 +00:00
Bill Somerville
9af1379576 Fix handling of SSL/TLS exceptions allowing errors to be ignored for a session
Not persistent  but I'm not  sure they need to  be as sites  we access
should have valid certificates and  chains of trust. This should allow
users  with  baulked SSL  installations  or  incomplete CA  stores  to
proceed with network accesses at their discretion.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7378 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-11 21:19:23 +00:00
Bill Somerville
dc6c7f959b Remove unnecessary main window size constraints
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7377 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2016-12-11 21:19:16 +00:00