Commit Graph

916 Commits

Author SHA1 Message Date
Joe Taylor
54c9ebec74 Update Tx frequency to the WSPR value after change to WSPR mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5772 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-08-10 14:18:57 +00:00
Bill Somerville
1937612685 Remove Tab 1/2 differences from UDP interface
The UDP "Free  text" message comamnd should  not expose implementation
differences between tab one and tab two. The "send next" capability is
not available on  tab two so use  of it has been removed  from the UDP
interface.

The ability  to trigger  the immediate  (or in next  Tx period  if the
current period  is Rx) sending  of the  current free text  message has
been added to the UDP interface. This is done by sending a "Free text"
UDP message containing an empty text message with the "Send" flag set.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5725 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-07-27 11:34:11 +00:00
Bill Somerville
76eed0ecc4 Start dealing with thread related object lifetime issues
There are  several object  lifetime issues that  can cause  crashes on
application close down.  This change  is the first phase of addressing
these issues.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5719 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-07-13 11:00:55 +00:00
Bill Somerville
5e3ec0e891 Move pseudo RNG seeding to start of application
Also switched  to qrand() in place  of rand() where possible  as it is
thread safe.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5716 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-07-12 10:28:28 +00:00
Bill Somerville
0a7bf935bc Fix regression in CAT sequencing from r5700
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5714 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-07-11 22:50:05 +00:00
Bill Somerville
ca5a1ed348 Make WSPR band hopping tuneup Tx dependent on Enable Tx button state
Tuneup is  now only  possible with  Tx Enable  checked, if  no message
transmission is required with  tuneup transmissions then Tx percentage
zero must be selected along with Enable Tx.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5713 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-07-11 22:49:56 +00:00
Bill Somerville
1c8d8f749c Ensure that the WSPR Tx percentage is correctly initialized
Also tidied some code up.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5700 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-07-07 19:02:25 +00:00
Bill Somerville
e0d4a2b2fb Update decodes widgets when entering and leaving WSPR modes
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5674 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-07-03 17:33:20 +00:00
Bill Somerville
2c3a258800 Manage .c2 files in the same way as .wav files.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5673 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-07-03 17:33:13 +00:00
Bill Somerville
45623b60b9 Only delete last .wav file on exit if it is not to be saved
Also enhanced  delete .wav  files menu  entry to  delete .c2  files as
well.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5672 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-07-03 17:33:05 +00:00
Joe Taylor
5250e0765a Only one text window in WSPR and Echo modes, even if "Show DXCC" is enabled.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5651 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-07-01 17:38:18 +00:00
Bill Somerville
3dd824ad6b Make the main window more portable and font change capable
The Rx meter  is now a better  Qt citizen and can be  resized. Added a
more obvious peak signal indicator. It  is now a custom widget derived
from QFrame and is now directly added via promotion in Designer.

Added a custom  widget to act as  a letter spin box, this  is used for
sub mode control.  Switched the frequency tolerance widget  to a combo
box with preset  values so that it is more  uniform across systems and
font sizes.

Added container widgets  for group control of various  UI widgets such
as  QSO controls,  DX call  controls and  WSPR controls.  Introduced a
stacked widget to allow the WSPR controls to be swapped in in place of
the "QSO" controls. The "QSO" controls  are are the Rx, Tx and related
controls along with  the main tab widget with the  message buttons and
fields. This means  that the WSPR version of the  main window (and EME
Echo mode) are now much cleaner.

Increased the  size of the  rig control  widget and styled  its colour
using a dynamic property so that it  can be defined in the Designer UI
definition. Reinstated it  as a push button to do  a rig control reset
and retry after an error.

Reset most UI widgets to default properties, particularly removing any
fixed sizes so that they can resize freely when fonts are changed. The
overall layout is now controlled almost exclusively by stretch factors
on some of the rows and columns of the various grid layout managers.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5630 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-25 22:41:13 +00:00
Steven Franke
7210d1d41d Added logic so that saving of c2 files will turn on/off with None/Save All. This did not fix Save Decoded, which has no effect in WSPR mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5626 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-21 23:08:47 +00:00
Bill Somerville
46032112ca Clear generated messages when clearing DX after logging
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5623 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-18 22:18:05 +00:00
Bill Somerville
4840e9e21d Ensure that he .WAV file read flag gets cleared when returning to monitoring
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5618 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-15 22:49:31 +00:00
Bill Somerville
8dbcf403aa Improved WSPR band hopping band selection
When  band hopping,  coordinated  slots that  are  unavailable may  be
substituted  by  non-coordinated  bands or  non-scheduled  coordinated
bands.

Rather than  randomly choosing a substitute  band, random permutations
of available receive-only and transmit allowed bands are generated and
consumed  one at  a time  when a  substitute band  is required.   This
ensures that  all available  bands get  an airing  on a  regular basis
while selections remain randomized as much as possible within the user
defined constraints of  coordinated bands, transmit ratio  and Rx only
bands.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5616 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-15 12:04:09 +00:00
Joe Taylor
df873479d0 Add UTC to WSPR Tx dividing line; add WSPR Rx dividing line when no decodes;
increase ranges of Gaiz/Zero sliders on Echo Graph.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5605 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-13 14:24:54 +00:00
Joe Taylor
7dda2c22ef Fix erroneous use of a potentially NULL pointer.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5604 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-13 12:08:32 +00:00
Joe Taylor
55cdeea079 Oops! Bad Rx frequencies were being recorded in WSPR_history.txt. Fixed.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5603 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-12 21:46:54 +00:00
Bill Somerville
3df86ef17e Initialize m_tuneup to ensure halt Tx button behaves
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5601 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-12 19:03:37 +00:00
Joe Taylor
0044f9a8c7 Remove a diagnostic write.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5600 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-12 17:30:08 +00:00
Joe Taylor
f3a0cee87c WSPR mode appends Date Time Freq T/R N to file WSPR_history.txt.
For possible statistical analysis.  N is the number of decoded signals.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5599 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-12 17:29:12 +00:00
Joe Taylor
38b79810d8 Remove a diagnostic write.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5598 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-12 14:10:54 +00:00
Joe Taylor
fee9f658c7 Echo mode is *not* a Simplex mode.
Code that sets Echo mode calls "WSPR_config(true)" to make a bunch
of irrelevant GUI controls invisible, thus simplifying the user
interface.  However, Echo mode should NOT be set as a simplex mode.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5597 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-12 14:09:40 +00:00
Bill Somerville
588c037ae9 Do not make unneeded rig adjustments when Doppler tracking disabled
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5595 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-12 00:26:44 +00:00
Bill Somerville
98f84a5902 Move >=50MHz check for Doppler tracking back to the main window
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5594 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-12 00:26:36 +00:00
Bill Somerville
724d5703c4 Add a flag for a mode to enforce simplex i.e. WSPR
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5593 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-11 22:42:41 +00:00
Joe Taylor
e38c71af1e Clear Message Averaging window when ClrAvg is clicked. Remove some
obsolete code.  Tweak a label.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5588 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-11 17:18:07 +00:00
Bill Somerville
640c0c00fe Finally getting the hang of UIs that work on Mac and elsewhere
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5587 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-11 17:01:12 +00:00
Joe Taylor
25d4388081 Fix logical flaw in Echo mode sequencing.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5585 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-11 15:48:00 +00:00
Joe Taylor
289b4c70f8 Correct the bounds error test in avecho. Ensure proper GUI controls
visible in Echo mode. Reset nsum=0 when Tx Enable is toggled ON in Echo mode.
Don't restart Monitor after finishing a sequence of Echo transmissions.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5584 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-11 15:32:55 +00:00
Joe Taylor
5968277cd7 Correct a logic flaw that occurred after *Tune* was used.
Remove some disused diagnostics.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5581 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-11 13:52:55 +00:00
Bill Somerville
aa561deed2 Refactor astro functionality into Astro class
Improved astronomical data and Doppler tracking control window widgets
and layout  management to make  it more platform independent  and font
change tolerant.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5580 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-11 13:36:13 +00:00
Joe Taylor
c3d227b410 Always display AstroData in Echo mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5575 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-10 17:55:08 +00:00
Joe Taylor
325449fe27 One click of Erase clears the text area in Echo mode. Fix calibration of
the "pwr" slider, relative to what actually happens.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5574 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-10 16:09:08 +00:00
Joe Taylor
f04a81dca0 Senc correct Tx tone after switching from JT4 to Echo mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5573 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-10 14:58:55 +00:00
Bill Somerville
ab718e2d7f Escape '<' and '>' in WSPR decodes window callsign field
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5572 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-10 14:48:35 +00:00
Joe Taylor
7137098869 Results of Echo mode to text window. (Not yet calibrated!)
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5567 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-09 19:04:21 +00:00
Joe Taylor
d69d3b4ca0 User-configurable directory for file azel.dat.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5566 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-09 17:39:59 +00:00
Bill Somerville
fd5c76e9b3 Exclude Rx only bands from WSPR band hopping random selections
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5564 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-09 16:56:49 +00:00
Joe Taylor
cb18d6c32e Further progress for Echo mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5561 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-09 14:42:53 +00:00
Bill Somerville
28b4c31dee Various WSPR fixes
Make WSPRnet.org spot uploads tolerant  of network issues, spots still
get  discarded for  any period  that  has problems  but now  uploading
resumes on the next period.

Ensure that  decoded text starts  with correct  font by not  using the
base class append method directly.

Fixed a major  memory leak in the WSPRNet class  which was not freeing
processed request reply objects.

Added some helpful debug prints in WSPRnet.org spot processing.

Also  tidied  up a  number  of  class  implementations that  were  not
including he MOC generated code.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5560 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-09 14:30:23 +00:00
Joe Taylor
4b1c3c319f Echo spectrum appears OK; must test Doppler corrections in both modes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5559 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-09 00:43:07 +00:00
Joe Taylor
fa96482008 Basic functionality of Echo spectrum is in place.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5557 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-08 19:42:20 +00:00
Bill Somerville
300365bad3 Allow rich text in help text files
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5556 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-08 17:45:19 +00:00
Bill Somerville
982b4edcd0 Refactored help windows into a helpful class
Also  used it  to implement  the  prefixes, shortcuts  and mouse  help
windows.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5554 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-08 16:05:01 +00:00
Bill Somerville
05a060c740 Make addon prefixes & suffixes help window platform independent
Also use a style  sheet to set the font as  widget level font settings
are overriden when the global default font is changed in settings.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5553 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-08 14:30:31 +00:00
Joe Taylor
a524b90f88 Don't switch Tx modes after a JT4 decode! Continued work on Echo mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5552 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-08 14:20:30 +00:00
Joe Taylor
83c5cf132a Format list of "Type 1" prefixes in columns -- thanks to Sandro, IW3RAB.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5551 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-08 13:08:21 +00:00
Joe Taylor
01dfb567f5 Don't allow a partial transmission in Echo mode. Fix RA, Dec, and Tsky
returned by astro().  



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5548 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-06 18:02:39 +00:00
Bill Somerville
db731fefb9 Improved function name
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5547 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-06 13:40:10 +00:00
Bill Somerville
a0f9aa367e User the hopping WSPR Tx schedule even when not hopping
The  Tx  schedule  used  in  band  hopping  is  tailored  to  minimize
consecutive transmit  periods while maintaining roughly  the requested
Tx/Rx ratio rather than being truly random.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5546 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-06 13:28:20 +00:00
Bill Somerville
8250901942 Revert unintended change in r5542
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5544 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-06 10:11:29 +00:00
Bill Somerville
92bd1700e6 WSPR band hopping improvements
Any  band can  be  added to  the  schedule  for a  day  phase, when  a
coordinated band  slot is not available  a random band will  be chosen
from all the bands enabled for the current phase (Day, Night, etc.).

Fine tuned the size of the hopping schedule table widget.

Coloured the coordinated band columns in the schedule table widget.

Due to the  full range of bands now being  supported, the settings key
for the band hopping schedule has been changed forcing current testers
to redefine their schedultes.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5543 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-06 00:06:46 +00:00
Joe Taylor
1b0ba09639 More changes related to EME Echo mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5542 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-06 00:02:02 +00:00
Steven Franke
7cb711779e Move call to tx scheduler per Bill's instructions.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5539 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-05 15:36:29 +00:00
Joe Taylor
fa720014c9 Make the WSPR-mode Tx Freq spinner track the red Tx Freq marker on Waterfall.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5537 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-05 13:42:45 +00:00
Steven Franke
4bf2788cc8 Force tx schedule update when pctx changes
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5534 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-05 00:41:12 +00:00
Steven Franke
7e3c93553f Enable new TX scheduler for WSPR mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5533 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-04 22:25:27 +00:00
Joe Taylor
9e73483b87 Fix the broken call to a "user_hardware" script.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5530 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-04 20:55:22 +00:00
Joe Taylor
b70a02cfcf Further progress toward Echo mode ...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5529 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-04 20:06:04 +00:00
Joe Taylor
d72b85d6c9 Progressing toward activation of EME Echo mode. Not there yet!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5528 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-04 19:46:12 +00:00
Joe Taylor
e8fd6bb3ab Save/restore Echo Graph configuration in wsjtx.ini rather than emecho.ini.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5525 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-04 18:17:13 +00:00
Joe Taylor
4ed7464051 Add some default Echo frequencies.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5524 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-04 17:53:38 +00:00
Joe Taylor
d3b6ac4ba2 Some cleanup of interaction between GUI and Echo mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5523 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-04 17:16:55 +00:00
Joe Taylor
437c8c5c3f Starting to add EME Echo mode. (Not yet functional!)
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5522 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-04 16:42:38 +00:00
Bill Somerville
aad2ec6950 Only show WSPR transmitting message when configured to show Tx messages
Also changed  the default for the  "Tx messages to Rx  window" setting
true.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5521 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-04 11:32:25 +00:00
Bill Somerville
260f1b4013 WSPR band hopping improvements
Added a per band Rx only flag.
Added Tx 100% as special case.
Only do  tune up if  not an Rx  only band and  if not scheduled  to Tx
already.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5520 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-04 10:58:36 +00:00
Bill Somerville
f3930eb5c8 Polish the UI for WSPR and WSPR band hopping
Provide  a  dialog for  band  hopping  scheduling which  replaces  tab
four. Ensure that split mode is  not used for WSPR. Select the correct
tab  for WSPR  operation.  Shift WSPR  band hopping  code  out of  the
MainWindow class.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5517 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-04 01:45:40 +00:00
Joe Taylor
9e2cc3f9d1 Fix the displayed tone-range markers on transition from WSPR to JT65.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5515 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-03 20:21:34 +00:00
Steven Franke
7c8f315e29 Fix a typo. Transmiting->Transmitting.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5504 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-02 23:40:54 +00:00
Joe Taylor
adebd2420a Pass absolute file path for JPLEPH to astrosub_().
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5494 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-02 15:59:52 +00:00
Joe Taylor
9f2f759b86 Back out the r5491 changes to where Doppler is applied. They were wrong!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5493 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-02 14:06:26 +00:00
Joe Taylor
9e409bd380 Reinstall code to mark WSPR transmissionsa yellow dividing line.
Re-order several lines of code so that Doppler frequency updates
occur before PTT is asserted.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5491 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-02 00:23:17 +00:00
Bill Somerville
fd878869a1 UDP free text message clicks the tx5 next radio button
This change allows a server to change the free text message and cue it
for transmission in  teh next period when  using tab 1. For  tab 2 the
behaviour is unchanged  and this message simply changes  the free text
message text.  The action if  the send option  is set on  this message
remains unchanged in that  it clicks the tx5 send now  button im tab 1
or the free text message radio button on tab 2 i.e. send ASAP.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5483 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-06-01 11:34:50 +00:00
Bill Somerville
98842e9a21 Fix band hopping regression
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5478 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-31 13:39:28 +00:00
Joe Taylor
307ead0434 Strip trailing "m" from command sent to "user_hardware" script.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5477 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-31 12:56:50 +00:00
Bill Somerville
ddbfd4801d Allow nummeric only band names in band hopping setup
This change allows the old and new format to coexist.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5476 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-31 12:47:15 +00:00
Bill Somerville
4a445b0779 Add FrequencyList methods to retrieve band name sets
Start to rationalize the new WSPR code with the data models.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5475 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-31 11:51:40 +00:00
Bill Somerville
fd06da1432 Improvements to models and delegates
Trying to  find the  sweet spot  for completeness,  usefulness, safety
and,  performance  from  the  various  custom  item  models  and  item
delegates.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5474 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-31 11:51:31 +00:00
Steven Franke
be3f84da2f Try letting hopping.f90 determine TX intervals
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5472 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-30 23:45:22 +00:00
Joe Taylor
be27ccbf72 Test, with no changes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5471 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-30 23:23:04 +00:00
Joe Taylor
7390bf21ce WSPR-mode behavior changes.
Forbid consecutive Tx sequences.
Mark Tx sequences with horizontal yellow line in waterfall.
Reduce the wait time in msleep() command (mainwindow.cpp line 4342).


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5470 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-30 16:08:20 +00:00
Bill Somerville
94fc6fe63c Convert character strings to QString where necessary
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5469 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-30 01:04:15 +00:00
Steven Franke
c0fc6ef382 Commit wspr tone frequency patch and fix GrayLineDuration typo
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5465 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-29 19:23:54 +00:00
Joe Taylor
ba617f2eee Simplify installation section of User Guide and make the Windows,
Linux, and OS X sub-sections similar in appearance.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5457 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-29 14:20:06 +00:00
Bill Somerville
b7841adb29 Fix WSPR band hopping defect
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5456 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-29 13:44:04 +00:00
Bill Somerville
c41e9bb976 Fix access to underlying data of the frequency list
A better approach to this area will follow.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5455 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-29 09:29:54 +00:00
Bill Somerville
f200506571 Add mode dependent working frequencies
Working frequencies are mode dependent  and a reset to defaults button
has been added.

Also re-factored much of the model  and item delegate code to simplify
several  of the  model  implementations. Introduced  a single  routine
called from main to register the custom types with Qt.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5453 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-28 23:22:17 +00:00
Joe Taylor
e674ac4cb0 Better logic for WSPR scheduling. Don't overwrite a grid6 with grid4
obtained by double-clicking on a decode.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5452 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-28 22:58:24 +00:00
Bill Somerville
4bf1471d2b Made the UDP message to change the free text message optionally send ASAP
This  message now  has  the ability  to simply  change  the free  text
message or to change the message and send it ASAP.

The message_aggregator reference UDP server application exercises this
feature by sending a new free  text message on any edit and requesting
it be sent  by WSJT-X when editing is finished  i,e, RETURN pressed or
focus moved away.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5445 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-28 17:33:39 +00:00
Bill Somerville
0f7708a98a Respond to clicks on Gen/Free radio buttons even if checked
The generated and free text radio buttons now refresh the sent message
even if teh clicked radio button is already checked.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5444 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-28 15:44:03 +00:00
Joe Taylor
13c59296dc Temporary diagnostics.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5436 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-28 00:26:48 +00:00
Bill Somerville
34f8924cfc Reintegrate the wsjtx_exp branch into the trunk
This  merge brings  the WSPR  feature development  into the  main line
ready for release in a future v1.6 release.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5424 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-27 13:08:28 +00:00
Bill Somerville
2e08443d08 Added flag to halt Tx UDP reply
The  reply  can now  be  used  to  turn off  auto  Tx  or to  halt  Tx
immediately. Also enforced the accept UDP requests setting for halt Tx
and set free text message replies.

Merged from the wsjtx-1.5 branch.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5336 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-06 22:25:56 +00:00
Bill Somerville
3b3ef37848 Added UDP replies to halt Tx and set free text message
Also added Tx status to status UDP message.

Added   the    above   features   to   the    reference   UDP   server
message_aggregator.

Merged from the wsjtx-1.5 branch.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5334 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-06 20:30:29 +00:00
Bill Somerville
a84b7cdfd3 ------------------------------------------------------------------------
r5297 | bsomervi | 2015-04-26 17:26:54 +0100 (Sun, 26 Apr 2015) | 49 lines

Various defect repairs and ambigous behaviour clarifications

A regression introduced in v1.5.0-rc1 where PTT on an alternate serial
port when using no CAT control is resolved.

A regression introduced  in v1.5.0-rc1 where the  network server field
was not being restored in the settings dialog has been resolved.

In settings the "Test PTT" button is now styled  by checked state.

The  "Test PTT"  button is  enabled without  needing click  "Test CAT"
first when no CAT rig control is selected.

Various parts of the settings dialog  are now disabled when no CAT rig
control is selected. These are the "Mode" group, the "Split Operation"
group and the "Monitor returns to last used frequency" check box. None
of  these have  any  visible impact  nor make  sense  without CAT  rig
control.

Initialization and teardown of rig  control internals has been revised
to avoid several problems related to timing and when switching between
different  CAT  settings. This  includes  improvements  in having  the
operating frequency restored  between sessions when not  using CAT rig
control.

The  initialization   of  OmniRig   connections  has   been  improved,
unfortunately it is  still possible to get an  exception when clicking
the  "Test  CAT" button  where  just  clicking  "OK" and  leaving  the
settings dialog will probably work.

Some unnecessary  CAT commands output  during direct rig  control have
been elided to reduce the level of traffic a little.

The handling of  some automatically generated free  text messages used
when the station is a type 2  compound callsign or is working a type 2
compound callsign has  been improved. This is related to  how a double
click  on  a  message  of  the   form  "DE  TI4/N0URE  73"  is  double
clicked. The  new behaviour depends  on whether the current  "DX Call"
matches the  call in the message.   This resolves the ambiguity  as to
whether this message  is a sign off  at the end of a  QSO with current
operator (a 73  message is generated) or a tail  end opportunity where
the message should be treated the same  as a CQ or QRZ message (WSJT-X
QSYs  to the  frequency, generates  messages and  selects message  one
ready to call).  This still  leaves some potential ambiguous behaviors
in  this complex  area but  selecting "Clear  DX call  and grid  after
logging" should resolve most of them.

Rig  control trace  messages have  been cleaned  up and  are now  more
helpful, less verbose and, tidier in the source code.
------------------------------------------------------------------------

Merged from the wsjtx-1.5 branch.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5298 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-04-26 16:41:12 +00:00
Bill Somerville
a51c5c4251 Reintegrate Joe's experimental VHF & up features
As at ^/branches/wsjtx_exp@5271



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5272 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-04-22 17:48:03 +00:00
Bill Somerville
d9f14cbed8 Reduced FFTW patience to 1 for debug builds for fastest startup
Don't make  proper Windows  applications in  debug builds.  This means
that  the  debug output  now  goes  to  the  console and  the  program
(wsjtx.exe) no longer detaches from the console.

If you  require a proper Windows  executable, for instance if  you are
getting  the  debug  output  via  the normal  method  of  attaching  a
debugger,  you can  still do  so  by setting  the CMake  configuration
option WSJT_CREATE_WINMAIN to ON for your debug build configuration on
Windows.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5249 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-04-20 15:20:38 +00:00
Bill Somerville
fcfca1b1fc Send a status update after a replay decodes as UDP messgaes action
This allows any new UDP client to know the WSJT-X status automatically
after  they have  requested  an  initial replay  of  all decodes  upon
discovering a WSJT-X instance.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5245 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-04-19 22:21:45 +00:00
Bill Somerville
3f75b4144a Send status information to UDP server
To  facilitate interaction  with other  applications WSJT-X  now sends
status  updates  to  a  predefined   UDP  server  or  multicast  group
address. The  status updates include the  information currently posted
to  the  decodes.txt and  wsjtx_status.txt  files.   An optional  back
communications  channel is  also implemented  allowing the  UDP server
application to control some basic actions in WSJT-X.

A reference implementaion of a typical UDP server written in C++ using
Qt is  provided to demonstrate  these facilities. This  application is
not intended  as a user  tool but  only as an  example of how  a third
party application may interact with WSJT-X.

The  UDP messages  Use QDataStream  based serialization.  Messages are
documented in  NetworkMessage.hpp along with some  helper classes that
simplify the building and decoding of messages.

Two  message  handling  classes   are  introduced,  MessageClient  and
MessageServer.  WSJT-X uses the MessageClient class to manage outgoing
and  incoming  UDP  messages   that  allow  communication  with  other
applications.   The MessageServer  class implements  the kind  of code
that a  potential cooperating  application might use.   Although these
classes  use  Qt serialization  facilities,  the  message formats  are
easily  read and  written  by  applications that  do  not  use the  Qt
framework.

MessageAggregator   is   a   demonstration   application   that   uses
MessageServer and  presents a GUI  that displays messages from  one or
more  WSJT-X instances  and  allows sending  back a  CQ  or QRZ  reply
invocation  by double  clicking  a decode.   This  application is  not
intended as  a user facing tool  but rather as a  demonstration of the
WSJT-X UDP messaging facility. It  also demonstrates being a multicast
UDP server by allowing multiple instances to run concurrently. This is
enabled by using an appropriate  multicast group address as the server
address.  Cooperating   applications  need  not   implement  multicast
techniques but  it is recomended  otherwise only a  single appliaction
can act as a broadcast message (from WSJT-X) recipient.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5225 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-04-15 16:40:49 +00:00
Bill Somerville
ae29261978 Remove compiler warning and avoid a potential issue with IB
Subtracting unsigned types  is tricky, made sure result  does not wrap
to avoid potentially implementation defined behaviour.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5211 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-04-11 15:29:37 +00:00
Bill Somerville
b6216c713d Band activity & Rx frequency widget enhancements
Ensure that  these windows have  their viewport scrolled fully  to the
left after deocdes and font changes.

Add the band to the separator line but only if we are certain that the
decodes below it are on that band.

Thanks to  Ton PA0TBR for the  implementation and testing of  the core
features of this change.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5207 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-04-10 20:25:14 +00:00
Bill Somerville
ed2f4ee226 Fix font setting
Several issues  mainly related  to the  rather complex  interaction of
style sheets and widget properties with respect to fonts.

Font setting  on the  astro window  should now  be consistent  and not
overridden by application style sheet driven font settings.

Decoded text font setting should now be consistent and not revert back
to Courier 10 on the next decode after a font change.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5179 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-04-07 12:08:55 +00:00
Bill Somerville
868ce60f7e Sort out decoded text font and font changes
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5159 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-04-05 12:22:01 +00:00
Bill Somerville
6ca5c61c32 Ensure Tx and Rx cursor are initialized from settings
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5072 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-03-18 16:28:49 +00:00
Bill Somerville
5566022c01 Ensure main frequency display gets initialized with Rig=None
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5068 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-03-17 17:35:39 +00:00
Bill Somerville
083416e8ba Refine the special treatment of 73 messages
The  feature to  set the  next message  to be  sent to  auto generated
message number 6 (CQ) is now only trggered when a transmission of a 73
message is made for the first time in a QSO. If a second 73 message is
required, for example when a QSO  partner repeats an RRR message after
your 73 message, simply double  clicking the RRR message will initiate
another 73 message without triggering a  log QSO dialog or setting the
next message to CQ.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5065 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-03-17 14:59:19 +00:00
Bill Somerville
ef75677e54 Don't attempt to lookup empty calls in CALL3.TXT
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5057 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-03-15 13:16:41 +00:00
Bill Somerville
2b781d1685 Improved automatic message handling
More consistent and accurate processing of compund callsigns including
recognizing the  user's call  in both base  and fully  qualified form,
extracting reports  from special type  one and type two  compound call
messages.  Ensure that  "CQ DX"  message prefixes  are recognized  and
processd correctly.

The  cycle of  double  clicking through  a QSO  has  been enhanced  to
recognoize the  standard messages correctly  and use the  correct next
message. The automatic  transmission button "Enable Tx"  now does what
it says and does not double as a stop transmit button. This allows the
current transmission  to complete  even if the  automatic transmission
feature is  disabled. In line with  this the "stop sending  after a 73
message is sent"  feature turns off the  automatic transmission enable
at the start of the sending of  a 73 message and also the next message
is now set up as the CQ  message automatically in this scenario.  A 73
message is now  either a standard message containing the  word "73" or
any free text  message containing "73" (not necessarily  as a distinct
word").

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5055 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-03-14 19:13:18 +00:00
Bill Somerville
6bd4602662 QtCreator/QtDesigner don't understand their own classes
Wrapping the  Ui:: UI  class in a  QScopedPointer, a  perfectly proper
thing to do, causes QtDesigner to fail to grok the code.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5019 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-03-08 00:06:43 +00:00
Bill Somerville
21bf2b6b31 Better handling of compound callsigns
Option  to control  standard message  generation for  type 2  compound
callsign holders.

Process decoded  messages based  on either base  or full  callsign for
both DE and DX callsigns.

Change CW id when callsign changed in settings.

Merged from wsjtx-1.4 branch.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5000 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-03-04 12:22:33 +00:00
Bill Somerville
a249ce4c29 Add option for returning to last monitored frequency on monitor enable
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4995 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-27 18:59:08 +00:00
Bill Somerville
2474f73b7b Improved next and current Tx message widget short cuts
Short cut  keys implemented via a  special key press event  handler do
not  fully  integrate  with  the UI  and  standard  UI  implementation
guidelines,  also they  introduce an  alternative code  path that  can
diverge from the intended behaviour.

Short  cuts   to  set  the  next   Tx  message  have  been   added  as
Ctrl+<number>.  Alt+<number>  short cuts  now do  as the  help implies
i.e. change  the current Tx message  even if there is  another message
being transmitted.

The log QSO  window should only be  triggered by a 73  Tx message when
transmitting.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4992 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-27 13:34:18 +00:00
Bill Somerville
4933a30546 Clean up program identification to pskreporter and other places
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4987 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-23 15:19:41 +00:00
Bill Somerville
0f72c3fd9b Abandon getting changeset revision number from svn keyword expansion
Subversion keyword expansion of $Rev:$ in  a file is hopeless as it is
impossible to  coordinate with  a release. Revert  to an  empty string
when it can't be discovered with svn info etc..

Further changes to the way verion and revision numbers are generated

Local builds from  source tar balls or the  two phase wsjtx-superbuild
no longer specify  any revision, just the version  number. Since these
sort  of builds  are  expected  to be  release  candidates or  release
versions the revision (svn changeset  number) is implicit from the svn
tag of the version.

Merged from wsjtx-1.4 branch.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4986 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-22 00:20:42 +00:00
Bill Somerville
b79456ed1b Look in the right place for temporary files
decoded.txt was not being deleted after a full activity window erase.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4982 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-21 20:13:28 +00:00
Bill Somerville
9a8521d2d4 Add a progress dialog to show that FFT optimization is doing something
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4965 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-15 00:48:38 +00:00
Bill Somerville
8956b53453 Use the OpenMp parallel decoding jt9 in WSJT-X
The temporary  development version  of jt9 called  jt9_omp is  now the
default jt9. This means that parallel  decoding of JT65 and JT9 is the
default on platforms that support  OpenMP.

If parallel decoding is not required or desired, it can be constrained
by setting the environment  variable OMP_THREAD_LIMIT=1.  In dual mode
operating this will deliver all decodes of the current mode before any
decodes of the  other with the potential impact of  taking up to twice
as long to finish decoding.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4960 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-13 16:55:47 +00:00
Bill Somerville
127c633a97 Bring colour settings into line with general configuration strategy
Colours behave  like other  configuration items  and changes  are only
applied when the Settings UI is dismissed via the "OK" button.

Simplified font settings and use  style sheets consistently to set the
application and decoded  text fonts. This is necessary  because any UI
widget that  has a style  sheet applied does not  honor a font  set by
QWidget::setFont()  even if  there is  no  font setting  in the  style
sheet, this is broken behaviour IMHO  but that is the way Qt currently
works.

Use a  style sheet to style  the frequency display and  clock. This is
necessary to  allow fonts to  be cascaded through parent  style sheets
and still be overridden on these widgets.

Simplify  the decoded  text  widgets,  there is  no  need  to use  the
QTextBrowser  as a  super class  since  the simpler  QTextEdit set  as
read-only is sufficient. Also removed  colour setting via a background
brush  as it  doesn't  work  and the  HTML  'bgcolor' attribute  works
correctly.

Change  to  UI  properties  of  the  decoded  text  widgets  to  allow
horizontal scrolling if required, this  allows larger fonts to be used
without truncating decoded messages.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4957 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-13 08:53:02 +00:00
Joe Taylor
a93e55fef0 Improved, simplified sort routine; faster and better "flatten"
procedure; better window functions for some FFTs, resulting in
better decoder performance; User-selectable colors for backgrounds
of decoded messages.  NB: more testing is desirable!



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4951 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-02-11 00:50:35 +00:00
Joe Taylor
3a8232b113 Made a start at implementing an option to use multi-threaded FFTs.
New command-line option for jt9: [-m nthreads].  Default is nthreads=1.
Also refactored a loop in filbig.f90 that was taking far too much
time.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4916 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-01-30 21:28:10 +00:00
Bill Somerville
418e0f804a The +2kHz check box should not adjust the frequency when starting up
Since the  last monitored dial  frequency is stored and  restored from
the settings the +2kHz setting should  only set the state of the check
box when initializing and not attempt to adjust the dial frequency.

Merged from the wsjtx-1.4 branch.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4903 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-01-22 00:45:11 +00:00
Bill Somerville
498d4af7a9 Rig polling not detecting changes against cached values correctly
The  PollingTransceiver class  was not  dealing with  frequency change
commands correctly when the mode was not specified.

Improved some diagnostic messages.

Only leave transmit mode when PTT is seen to drop.

Merged from wsjtx-1.4 branch.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4886 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-01-08 23:51:56 +00:00
Bill Somerville
a9957c3193 Added device error message to file open error messages
Thanks to  Mike W9MDB for contributing  this as a patch.  Also added a
few more in elsewhere.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4883 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-01-06 19:00:46 +00:00
Bill Somerville
6a6e56b712 Set split mode before and after setting Tx frequency
Also cleaned up duplicate trace output.

Using the  DX Lab  Suite Commander  CAT interface  with rigs  like the
TS-2000  requires  that  split  mode  be set  after  changing  the  Tx
frequency. This  is because  setting teh  Tx frequency  disables split
mode.

With some Icom rigs  the rig must be in split  mode before setting the
Tx frequency otherwise the Tx frequency change will not be honoured.

To fix  this the sequence set-split,  set-tx-frequency, set-split must
always be used to change the Tx frequency.

Support for new DX Lab Suite Commander TCP/IP commands

Dave AA6YQ has added two new commands to the Commander server to allow
more reliable control.

Requires DX Lab Suite Commander 11.1.4 or later.

Ensure split Tx frequency agrees with UI before transmitting

Ensure split works on Yaesu via Hamlib without breaking others

Also improved class HamlibTransceiver debug trace messages.

Merged r4776-r4779 from wsjtx-1.4 branch.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4780 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-12-06 20:23:29 +00:00
Bill Somerville
f37ed4cd78 Take advantage of the new KVASD v1.12
Pass the  temporary directory to  jt9 and use  it to give  the correct
paths  to  temporary files.  Also  jt9  passes  the absolute  path  to
kvasd.dat in the temporary directory to kvasd.

Clear out all the annoying cruft that has accumulated due to having to
run with $CWD as the temporary directory.

Use QStandardPaths  to find the  writable data directory  where needed
rather than passing it around  between objects. This now works because
the $CWD hasn't been changed.

Do away with the CMake option WSJT_STANDARD_FILE_LOCATIONS as it is no
longer needed.

Fix astro status file azel.dat formatting.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4732 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-12-03 00:06:54 +00:00
Bill Somerville
f8e51d4e62 Keep UI in line with messages when clicking F4
When tab 2 is  current the action of F4 is to set  the next message to
transmit the standard

Merged  from branch wsjtx-1.4.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4693 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-11-29 20:35:58 +00:00
Joe Taylor
8ceeb501b4 Fix a longstanding bug in "on_addButton_clicked()".
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4647 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-11-25 14:39:15 +00:00
Joe Taylor
ac7e565f18 Silence compiler warning.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4623 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-11-21 22:10:25 +00:00
Joe Taylor
021f677687 Add wisdom for the FFTs done by symspec_(), wsjtx[.exe].
Also complete the wrapper code in wisdom.c.
TBD: should be possible to use fftw3f.f03 instead of the ad hoc wisdom.c.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4617 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-11-21 15:17:22 +00:00
Joe Taylor
c5d053dfa7 Should have been included in previous commit.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4611 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-11-20 19:01:52 +00:00
Bill Somerville
3b43a18362 Fix various fake split mode issues
Merged from wsjtx-1.4 branch.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4573 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-10-30 22:03:04 +00:00
Joe Taylor
0e96882d8b Improve the way messages with compound calls are automatically generated.
Routine packmsg now tries the shortlist (Type 1 prefix or suffix) first.
Then it tries to to make a valid message using a Type 2 prefix or suffix.
If both fail, it packs the first 13 characters as a free-text message.

The GUI now generates the most useful messages with compound callsigns
of all valid types.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4533 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-10-19 00:56:41 +00:00
Joe Taylor
6a8f7cbd91 Correct the "Grid" message on Tab 2 for Type 1 compound callsigns.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4486 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-10-07 17:43:30 +00:00
Joe Taylor
3a3645b5de Correct the "dB" message on Tab 2 when MyCall is a compound callsign.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4485 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-10-07 16:44:29 +00:00
Bill Somerville
024c0eb616 Do one automatic retry on CAT errors
To allow for intermittant CAT failures  one retry before bringing up a
message box should allow many setups to be more reliable.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4473 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-10-04 14:45:09 +00:00
Bill Somerville
c40cec50de Menu action to open the log directory
Since the log files have moved to  a hidden directory a menu action to
open the logs directory in a suitable system applicaiton is needed.

Added "Open log directory" to File manu bar pop up menu.

Merged from wsjtx-1.4 branch.




git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4471 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-10-04 11:47:03 +00:00
Bill Somerville
8d3c86c399 Disallow multiple instances without a unique rig name
Because of confilicts using the  shared memory to communicate with jt9
only one instance of WSJT-X may run with each unique key (rig name).

Added a QLockFile for each unique  key in the temp directory and logic
to deal with stale locks and retries.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4465 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-10-03 16:07:43 +00:00
Bill Somerville
cb93d8f3d1 Moving WSJT-X "trunk" on to v1.5.
If built with  qmake the version string will now  be "Not for Release"
since some  many features essential  to making a complete  package are
currently only build when using CMake.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4372 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-25 19:17:19 +00:00
Bill Somerville
e2c8634f54 Get local user manual working on Linux systems.
The  location  of  documentation   files  on  Linux  distributions  is
controlled  to a  certain extent.  Using the  QStandardPaths::locate()
method helps us with this.

Work round the  misbehaviour of QCoreApplication::applicationDirPath()
when  the  CWD has  been  changed  by  working out  the  documentation
location before changing  the CWD to a temporary  directory. This path
is now provided by the Configuration settings class which also manages
other run time paths.

Updated  Debian packaging  to move  a little  nearer a  conforming DEB
file.

Added a basic manpage for rigctld-wsjtx.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4364 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-25 14:45:36 +00:00
Bill Somerville
dc289f04f1 Removed temporary debugging print.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4363 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-25 12:53:46 +00:00
Bill Somerville
248f78d780 Add validation to message entry fields.
All message  entry fields on the  mainscreen and in the  macro editing
facilities are now restricted to valid characters in the JT65/JT9 free
text message alphabet.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4362 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-25 11:36:01 +00:00
Bill Somerville
960601b8fe Fix several issues with shortcut keys.
Do not drop  through shortcut key handling so  that spurious responses
are avoided.

The keyPressEvent handlers must call the super class implementation if
the event os not handled.

Correct a typo in the shortcut help display.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4361 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-25 11:35:50 +00:00
Bill Somerville
835cd0f89b Fix online manual URL.
Fix manpage destination.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4360 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-25 00:06:07 +00:00
Bill Somerville
d4e55a093d Add local HTML help file to help menu.
So that a manual can be viewed without an Internet connection a second
manual action has been added to  the WSJT_X help menu. This shells out
to the default web browser with a local file target.

The build has been enhanced to install and package the current version
of the  HTML user manual  as downloaded from  the project web  site at
build time

The package  file locations have  been adjusted to be  compatible with
the QStandardPaths  class so that  its locate()  method can be  used to
portably access resources like this local help file

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4359 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-24 23:46:32 +00:00
Bill Somerville
226f44936a Disallow mode changes from decode dbl-clicks when transmitting.
The message generation code doen't allow  for a mode change on the fly
so this has been disabled.

Also and  decode double click  that would  change a message  or change
mode or  change a frquency  that gets  disallowed is ignored  i.e. the
outgoing message is not changed either.

Remove a  duplicate Tx  message in  decode window that  crept in  in a
prior change.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4353 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-24 17:26:03 +00:00
Bill Somerville
6d570cda87 Ensure Plus 2kHz Check Box is disabled in Transmit when required.
The Plus 2 kHz check box should  not be enabled during transmit if the
"Allow Tx Frequency Changes While Transmitting" is not checked.

Also fixed a  defect that caused the disabled during  Tx state of some
widgets to not clear due to transmit or tune period being shorter than
a poll interval.   Fixed by ensuring PTT changes  are always signalled
rather than waiting for the next poll.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4352 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-24 17:25:55 +00:00
Bill Somerville
30b50ff9e2 Do not set split Tx frequency when rig changes frequency.
WSJT-X was attempting to set the split Tx frequency when a dial change
from the rig is detected. Because of the way some rigs and rig servers
report the Tx frequency  while the rig is in Tx  mode this was causing
the rig  to "walk" along the  band. Setting of split  Tx frequency has
been limited to WSJT-X initiated instances only.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4350 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-24 17:25:28 +00:00
Bill Somerville
4a32b0bef6 Add facility to disallow CAT commands while transmitting.
Some rigs either do not honour some CAT commands while transmitting or
interpret them  incorrectly. To  deal with this  a settings  option to
allow TX  frequency changes while  transmitting has been added  with a
default value of off.

Any UI actions that directly or indirectly change the TX frequency are
guarded according to this new option. As well as this band changes and
use of  the +2kHz check box  are disabled and guarded  respectively in
transmit mode.

Mode changes via the menu are now disabled while transmitting.

When TX frequency changes are allowed; frequency changes are correctly
implemented while in tune mode.

Double clicking  decodes while  transmitting now  correctly regenerate
and change the message sent on the fly.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4349 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-24 17:25:19 +00:00