WSJT-X/qmap/libqmap/qmapa.f90

121 lines
4.4 KiB
Fortran

subroutine qmapa(dd,ss,savg,newdat,nutc,fcenter,ntol,nfa,nfb, &
mousedf,mousefqso,nagain,ntx30a,ntx30b,nfshift,max_drift,offset, &
nfcal,mycall,hiscall,hisgrid,nfsample,nBaseSubmode,ndepth, &
datetime,ndop00,fselected,bAlso30,nhsym,nCFOM)
! Processes timf2 data received from Linrad to find and decode Q65 signals.
use timer_module, only: timer
type candidate
real :: snr !Relative S/N of sync detection
real :: f !Freq of sync tone, 0 to 96000 Hz
real :: xdt !DT of matching sync pattern, -1.0 to +4.0 s
integer :: ntrperiod !60 for Q65-60x, 30 for Q65-30x
integer :: iseq !0 for first half-minute, 1 for second half
end type candidate
type good_decode
real :: f !Freq of sync tone, 0 to 96000 Hz
integer :: ntrperiod !60 for Q65-60x, 30 for Q65-30x
integer :: iseq !0 for first half-minute, 1 for second half
end type good_decode
parameter (NFFT=32768) !Size of FFTs done in symspec()
parameter (MAX_CANDIDATES=50)
parameter (MAXMSG=1000) !Size of decoded message list
parameter (NSMAX=60*96000)
real dd(2,NSMAX) !I/Q data from Linrad
real ss(400,NFFT) !Symbol spectra
real savg(NFFT) !Average spectrum
real*8 fcenter !Center RF frequency, MHz
logical*1 bAlso30,bClickDecode
character mycall*12,hiscall*12,hisgrid*6
type(candidate) :: cand(MAX_CANDIDATES)
type(good_decode) found(MAX_CANDIDATES)
character*64 result
character*20 datetime
common/decodes/ndecodes,ncand2,nQDecoderDone,nWDecoderBusy, &
nWTransmitting,kHzRequested,result(50)
save
tsec0=sec_midn()
if(nagain.ge.1) ndepth=3 !Use full depth for click-to-decode
nkhz_center=nint(1000.0*(fcenter-int(fcenter)))
mfa=nfa-nkhz_center+48
mfb=nfb-nkhz_center+48
mode_q65=nBaseSubmode
nts_q65=2**(mode_q65-1) !Q65 tone separation factor
f0_selected=fselected - nkhz_center + 48.0
if(nagain.le.1) then
call timer('get_cand',0)
! Get a list of decoding candidates
call getcand2(ss,savg,nts_q65,nagain,nhsym,ntx30a,ntx30b,ntol, &
f0_selected,bAlso30,cand,ncand2)
call timer('get_cand',1)
endif
nwrite_q65=0
df=96000.0/NFFT !df = 96000/NFFT = 2.930 Hz
ftol=0.010 !Frequency tolerance (kHz)
foffset=0.001*(1270 + nfcal) !Offset from sync tone, plus CAL
fqso=mousefqso + foffset - 0.5*(nfa+nfb) + nfshift !fqso at baseband (khz)
nqd=0
bClickDecode=(nagain.ge.1)
call timer('fftbig ',0)
call fftbig(dd,NSMAX) !Do the full-length FFT
call timer('fftbig ',1)
if(nagain.ge.2) then
ncand2=1
fqso=fselected
endif
do icand=1,ncand2 !Attempt to decode each candidate
tsec=sec_midn() - tsec0
if(ndiskdat.eq.0) then
! No more realtime decode attempts if it's nearly too late, already
if(nhsym.eq.130 .and. tsec.gt.6.0) exit
if(nhsym.eq.200 .and. tsec.gt.10.0) exit
if(nhsym.eq.330 .and. tsec.gt.6.0) exit
if(nhsym.eq.390 .and. tsec.gt.16.0) exit
endif
f0=cand(icand)%f
ntrperiod=cand(icand)%ntrperiod
iseq=cand(icand)%iseq
if(nagain.eq.0) then
! Skip this candidate if we already decoded it.
do j=1,ndecodes
if(abs(f0-found(j)%f).lt.0.005 .and. &
ntrperiod.eq.found(j)%ntrperiod .and. &
iseq.eq.found(j)%iseq) go to 10
enddo
endif
mode_q65_tmp=mode_q65
if(ntrperiod.eq.30) mode_q65_tmp=max(1,mode_q65-1)
freq=f0+nkhz_center-48.0-1.27046
ikhz=nint(freq)
idec=-1
call timer('q65b ',0)
call q65b(nutc,nqd,fcenter,nfcal,nfsample,ikhz,mousedf,ntol, &
ntrperiod,iseq,mycall,hiscall,hisgrid,mode_q65_tmp,f0,fqso, &
nkhz_center,newdat,nagain,bClickDecode,max_drift,offset, &
ndepth,datetime,nCFOM,ndop00,nhsym,idec)
call timer('q65b ',1)
if(bClickDecode .and. idec.ge.0) exit
if(idec.ge.0) then
! Save some details on good decodes, to avoid duplicated effort
found(ndecodes)%f=f0
found(ndecodes)%ntrperiod=ntrperiod
found(ndecodes)%iseq=iseq
end if
10 continue
enddo ! icand
return
end subroutine qmapa