VE7UWU/sdrangel
1
0
Fork 0
mirror of https://github.com/f4exb/sdrangel.git synced 2025-11-29 19:33:26 -05:00
Code Issues Projects Releases Wiki Activity
sdrangel/sdrbase/dsp
History
f4exb 44e764f492 New scope: interim state (7)
2017-02-05 04:41:32 +01:00
..
afsquelch.cpp
…
afsquelch.h
…
agc.cpp
NFM demod: channel power calculation and squelch corrections
2016-12-05 03:46:42 +01:00
agc.h
…
bandpass.h
…
basebandsamplesink.cpp
…
basebandsamplesink.h
Modulators: changed single Tx channel samples feed handling
2016-12-22 23:39:06 +01:00
basebandsamplesource.cpp
Multiple modulators support: works with two modulators
2016-12-26 12:11:51 +01:00
basebandsamplesource.h
Multiple modulators support: works with two modulators
2016-12-26 12:11:51 +01:00
channelmarker.cpp
…
channelmarker.h
…
complex.h
…
ctcssdetector.cpp
…
ctcssdetector.h
…
cwkeyer.cpp
CW smoother: set default ramp time to 4ms and set the modulators ramp time at the same value
2016-12-16 00:02:37 +01:00
cwkeyer.h
WFM modulator: do not go below 96 kHz for the channelizer sample rate. Attempt to fix CW problem
2017-01-05 11:37:57 +01:00
decimators.h
SDRplay plugin: adjust documentation. Corrections and re-organization of the main readme.md file
2016-11-21 18:07:58 +01:00
devicesamplesink.cpp
Modulators: changed single Tx channel samples feed handling
2016-12-22 23:39:06 +01:00
devicesamplesink.h
…
devicesamplesource.cpp
…
devicesamplesource.h
…
downchannelizer.cpp
Allow SSE 4.1 optimization on the down channelizer
2016-11-07 18:51:32 +01:00
downchannelizer.h
Allow SSE 4.1 optimization on the down channelizer
2016-11-07 18:51:32 +01:00
dspcommands.cpp
Tx ph.1: Sample source FIFO read with signal. Use a specific spectrum sink (vis) reference in Device sink engine for main spectrum rendering
2016-10-24 18:06:44 +02:00
dspcommands.h
Tx ph.1: Sample source FIFO read with signal. Use a specific spectrum sink (vis) reference in Device sink engine for main spectrum rendering
2016-10-24 18:06:44 +02:00
dspdevicesinkengine.cpp
Multiple modulators support: optimization: comment out code that is useless when processing sample by sample
2016-12-26 14:52:59 +01:00
dspdevicesinkengine.h
Multiple transmission channels warning when adding more than one channel
2016-12-26 15:26:25 +01:00
dspdevicesourceengine.cpp
SDRPlay plugin: now working with open source libmirisdr
2016-11-16 02:38:21 +01:00
dspdevicesourceengine.h
…
dspengine.cpp
New audio devices dialog and handling: use selected audio devices
2017-01-06 16:04:32 +01:00
dspengine.h
New audio devices dialog and handling: use selected audio devices
2017-01-06 16:04:32 +01:00
dsptypes.h
Tx ph.1: Added the DSPDeviceSinkEngine class
2016-10-17 18:15:08 +02:00
dvserialengine.cpp
DV Serial: fall back multi slot support
2016-10-28 08:37:27 +02:00
dvserialengine.h
…
dvserialworker.cpp
DV serial: removed useless parameter
2016-10-28 09:09:19 +02:00
dvserialworker.h
DV serial: removed useless parameter
2016-10-28 09:09:19 +02:00
fftengine.cpp
…
fftengine.h
…
fftfilt.cxx
…
fftfilt.h
…
fftwengine.cpp
…
fftwengine.h
…
fftwindow.cpp
…
fftwindow.h
…
filerecord.cpp
…
filerecord.h
…
filtermbe.cpp
…
filtermbe.h
…
filterrc.cpp
…
filterrc.h
…
gfft.h
…
hbfiltertraits.cpp
Tx support: optimize final interpolator stages
2017-01-03 23:25:20 +01:00
hbfiltertraits.h
Tx support: optimize final interpolator stages
2017-01-03 23:25:20 +01:00
highpass.h
…
interpolator.cpp
Tx ph.2: Interpolator polyphase filter: add possibility to specify the number of taps per phase
2016-10-31 23:40:46 +01:00
interpolator.h
Use more precise SIMD flags and detect actual x86_64 SIMD features
2016-11-07 00:42:57 +01:00
interpolators.h
Tx support: optimize final interpolator stages
2017-01-03 23:25:20 +01:00
inthalfbandfilter.h
added 'my' interpolation methods
2016-12-31 04:23:59 +01:00
inthalfbandfilterdb.h
added 'my' interpolation methods
2016-12-31 04:23:59 +01:00
inthalfbandfiltereo1.h
added 'my' interpolation methods
2016-12-31 04:23:59 +01:00
inthalfbandfiltereo1i.h
IntHalfbandFilterEO1: simplification for SSE 4.1 only and fix
2016-11-07 18:23:59 +01:00
inthalfbandfilterst.h
added 'my' interpolation methods
2016-12-31 04:23:59 +01:00
inthalfbandfiltersti.h
Improve int halfband filter even/odd I/Q stride variant
2016-11-10 02:56:49 +01:00
kissengine.cpp
…
kissengine.h
…
kissfft.h
…
lowpass.cpp
…
lowpass.h
…
misc.h
…
movingaverage.h
Moving average fixes
2017-01-15 11:26:11 +01:00
nco.cpp
SSB Modulator: Interim state (4)
2016-12-13 19:57:07 +01:00
nco.h
SSB Modulator: Interim state (4)
2016-12-13 19:57:07 +01:00
ncof.cpp
Added a NCO with floating point phase calculation before conversion to int for table indexing. This increases frequency precision and is mandatory for CTCSS tone generator
2016-12-19 02:41:31 +01:00
ncof.h
Added a NCO with floating point phase calculation before conversion to int for table indexing. This increases frequency precision and is mandatory for CTCSS tone generator
2016-12-19 02:41:31 +01:00
nullsink.cpp
…
nullsink.h
…
phasediscri.h
NFM demod: new discriminator
2017-01-30 23:28:06 +01:00
phaselock.cpp
…
phaselock.h
…
pidcontroller.cpp
…
pidcontroller.h
…
samplesinkfifo.cpp
…
samplesinkfifo.h
…
samplesinkfifodecimator.h
Tx ph.2: Templatized IntHalfbandFilter and improved coefficients. Changed to order 80 for upsamplers and 48 for downsamplers
2016-10-29 17:01:02 +02:00
samplesinkfifodoublebuffered.cpp
Added a double buffered sample sink FIFO class
2016-10-06 15:39:18 +02:00
samplesinkfifodoublebuffered.h
…
samplesourcefifo.cpp
Sample source FIFO: write ahead the exact same amount of samples that were read. This smoothes out the process and avoids hickups
2017-01-09 02:13:27 +01:00
samplesourcefifo.h
Multiple modulators support: works with two modulators
2016-12-26 12:11:51 +01:00
scopevis.cpp
…
scopevis.h
…
scopevisng.cpp
New scope: interim state (7)
2017-02-05 04:41:32 +01:00
scopevisng.h
New scope: interim state (7)
2017-02-05 04:41:32 +01:00
spectrumscopecombovis.cpp
…
spectrumscopecombovis.h
…
spectrumscopengcombovis.cpp
New scope: interim state (1)
2017-01-29 19:51:45 +01:00
spectrumscopengcombovis.h
New scope: interim state (1)
2017-01-29 19:51:45 +01:00
spectrumvis.cpp
…
spectrumvis.h
…
threadedbasebandsamplesink.cpp
TX ph.1: Baseband sample sources and Device sample sinks (1)
2016-10-14 18:47:19 +02:00
threadedbasebandsamplesink.h
TX ph.1: Baseband sample sources and Device sample sinks (1)
2016-10-14 18:47:19 +02:00
threadedbasebandsamplesource.cpp
Modulators: changed single Tx channel samples feed handling
2016-12-22 23:39:06 +01:00
threadedbasebandsamplesource.h
Multiple modulators support: works with two modulators
2016-12-26 12:11:51 +01:00
upchannelizer.cpp
Modulators: changed single Tx channel samples feed handling. Pure virtual function is useless
2016-12-22 23:45:56 +01:00
upchannelizer.h
All modulators: use buffer for input audio that is always in use while generation is running. This fixes lockup problem reported in issue #11
2016-12-26 01:39:34 +01:00