| .. |
|
afsquelch.cpp
|
Adapt to Qt Android #1
|
2016-02-28 10:53:37 +01:00 |
|
afsquelch.h
|
Reorganized sdrbase library code
|
2016-03-08 04:54:12 +01:00 |
|
agc.cpp
|
NFM demod: channel power calculation and squelch corrections
|
2016-12-05 03:46:42 +01:00 |
|
agc.h
|
Reorganized sdrbase library code
|
2016-03-08 04:54:12 +01:00 |
|
bandpass.h
|
Reorganized sdrbase library code
|
2016-03-08 04:54:12 +01:00 |
|
basebandsamplesink.cpp
|
RxTx semantic move: renamed SampleSink to BasebandSampleSink
|
2016-10-02 22:29:04 +02:00 |
|
basebandsamplesink.h
|
Modulators: changed single Tx channel samples feed handling
|
2016-12-22 23:39:06 +01:00 |
|
basebandsamplesource.cpp
|
Multiple modulators support: works with two modulators
|
2016-12-26 12:11:51 +01:00 |
|
basebandsamplesource.h
|
Multiple modulators support: works with two modulators
|
2016-12-26 12:11:51 +01:00 |
|
channelmarker.cpp
|
Replaced direct output to console for debug messages with qDebug
|
2015-08-09 10:33:04 +02:00 |
|
channelmarker.h
|
Reorganized sdrbase library code
|
2016-03-08 04:54:12 +01:00 |
|
complex.h
|
Reorganized sdrbase library code
|
2016-03-08 04:54:12 +01:00 |
|
ctcssdetector.cpp
|
Adapt to Qt Android #1
|
2016-02-28 10:53:37 +01:00 |
|
ctcssdetector.h
|
Reorganized sdrbase library code
|
2016-03-08 04:54:12 +01:00 |
|
cwkeyer.cpp
|
CW smoother: set default ramp time to 4ms and set the modulators ramp time at the same value
|
2016-12-16 00:02:37 +01:00 |
|
cwkeyer.h
|
WFM modulator: do not go below 96 kHz for the channelizer sample rate. Attempt to fix CW problem
|
2017-01-05 11:37:57 +01:00 |
|
decimators.h
|
SDRplay plugin: adjust documentation. Corrections and re-organization of the main readme.md file
|
2016-11-21 18:07:58 +01:00 |
|
devicesamplesink.cpp
|
Modulators: changed single Tx channel samples feed handling
|
2016-12-22 23:39:06 +01:00 |
|
devicesamplesink.h
|
TX ph.1: Baseband sample sources and Device sample sinks (1)
|
2016-10-14 18:47:19 +02:00 |
|
devicesamplesource.cpp
|
RxTx semantic move: created DeviceSampleSource class
|
2016-10-02 23:21:53 +02:00 |
|
devicesamplesource.h
|
RxTx semantic move: renamed SampleFifo to SampleSinkFifo
|
2016-10-06 19:18:02 +02:00 |
|
downchannelizer.cpp
|
Allow SSE 4.1 optimization on the down channelizer
|
2016-11-07 18:51:32 +01:00 |
|
downchannelizer.h
|
Allow SSE 4.1 optimization on the down channelizer
|
2016-11-07 18:51:32 +01:00 |
|
dspcommands.cpp
|
Tx ph.1: Sample source FIFO read with signal. Use a specific spectrum sink (vis) reference in Device sink engine for main spectrum rendering
|
2016-10-24 18:06:44 +02:00 |
|
dspcommands.h
|
Tx ph.1: Sample source FIFO read with signal. Use a specific spectrum sink (vis) reference in Device sink engine for main spectrum rendering
|
2016-10-24 18:06:44 +02:00 |
|
dspdevicesinkengine.cpp
|
Multiple modulators support: optimization: comment out code that is useless when processing sample by sample
|
2016-12-26 14:52:59 +01:00 |
|
dspdevicesinkengine.h
|
Multiple transmission channels warning when adding more than one channel
|
2016-12-26 15:26:25 +01:00 |
|
dspdevicesourceengine.cpp
|
Device source engine: initialize sample rate and center frequency in the sink when adding a threaded sample sink
|
2017-02-14 21:46:35 +01:00 |
|
dspdevicesourceengine.h
|
Removed useless dependency
|
2016-10-06 15:36:54 +02:00 |
|
dspengine.cpp
|
New audio devices dialog and handling: use selected audio devices
|
2017-01-06 16:04:32 +01:00 |
|
dspengine.h
|
New audio devices dialog and handling: use selected audio devices
|
2017-01-06 16:04:32 +01:00 |
|
dsptypes.h
|
Tx ph.1: Added the DSPDeviceSinkEngine class
|
2016-10-17 18:15:08 +02:00 |
|
dvserialengine.cpp
|
DV Serial: fall back multi slot support
|
2016-10-28 08:37:27 +02:00 |
|
dvserialengine.h
|
DSD demod plugin: fixed DV Serial concurrent support
|
2016-09-11 03:57:35 +02:00 |
|
dvserialworker.cpp
|
DV serial: removed useless parameter
|
2016-10-28 09:09:19 +02:00 |
|
dvserialworker.h
|
DV serial: removed useless parameter
|
2016-10-28 09:09:19 +02:00 |
|
fftengine.cpp
|
git clone git://git.osmocom.org/sdrangelove.git
|
2014-05-18 16:52:39 +01:00 |
|
fftengine.h
|
Reorganized sdrbase library code
|
2016-03-08 04:54:12 +01:00 |
|
fftfilt.cxx
|
Started implementation of a Channel Analyzer plugin. Works basically
|
2015-06-21 12:46:47 +02:00 |
|
fftfilt.h
|
Reorganized sdrbase library code
|
2016-03-08 04:54:12 +01:00 |
|
fftwengine.cpp
|
git clone git://git.osmocom.org/sdrangelove.git
|
2014-05-18 16:52:39 +01:00 |
|
fftwengine.h
|
Reorganized sdrbase library code
|
2016-03-08 04:54:12 +01:00 |
|
fftwindow.cpp
|
git clone git://git.osmocom.org/sdrangelove.git
|
2014-05-18 16:52:39 +01:00 |
|
fftwindow.h
|
Reorganized sdrbase library code
|
2016-03-08 04:54:12 +01:00 |
|
filerecord.cpp
|
RxTx semantic move: updated debug message and displayed class names
|
2016-10-08 10:35:07 +02:00 |
|
filerecord.h
|
RxTx semantic move: renamed SampleSink to BasebandSampleSink
|
2016-10-02 22:29:04 +02:00 |
|
filtermbe.cpp
|
DSD demod plugin: DV serial: fix filter, timeout value and volume control
|
2016-09-11 17:02:49 +02:00 |
|
filtermbe.h
|
DSD demod plugin: lowpass filter for DV serial upsample
|
2016-09-10 20:03:06 +02:00 |
|
filterrc.cpp
|
BFM demod: apply de-emphasis
|
2015-12-08 02:00:30 +01:00 |
|
filterrc.h
|
Reorganized sdrbase library code
|
2016-03-08 04:54:12 +01:00 |
|
gfft.h
|
Reorganized sdrbase library code
|
2016-03-08 04:54:12 +01:00 |
|
hbfiltertraits.cpp
|
Tx support: optimize final interpolator stages
|
2017-01-03 23:25:20 +01:00 |
|
hbfiltertraits.h
|
Tx support: optimize final interpolator stages
|
2017-01-03 23:25:20 +01:00 |
|
highpass.h
|
Reorganized sdrbase library code
|
2016-03-08 04:54:12 +01:00 |
|
interpolator.cpp
|
Tx ph.2: Interpolator polyphase filter: add possibility to specify the number of taps per phase
|
2016-10-31 23:40:46 +01:00 |
|
interpolator.h
|
Use more precise SIMD flags and detect actual x86_64 SIMD features
|
2016-11-07 00:42:57 +01:00 |
|
interpolators.h
|
Tx support: optimize final interpolator stages
|
2017-01-03 23:25:20 +01:00 |
|
inthalfbandfilter.h
|
added 'my' interpolation methods
|
2016-12-31 04:23:59 +01:00 |
|
inthalfbandfilterdb.h
|
added 'my' interpolation methods
|
2016-12-31 04:23:59 +01:00 |
|
inthalfbandfiltereo1.h
|
added 'my' interpolation methods
|
2016-12-31 04:23:59 +01:00 |
|
inthalfbandfiltereo1i.h
|
IntHalfbandFilterEO1: simplification for SSE 4.1 only and fix
|
2016-11-07 18:23:59 +01:00 |
|
inthalfbandfilterst.h
|
added 'my' interpolation methods
|
2016-12-31 04:23:59 +01:00 |
|
inthalfbandfiltersti.h
|
Improve int halfband filter even/odd I/Q stride variant
|
2016-11-10 02:56:49 +01:00 |
|
kissengine.cpp
|
git clone git://git.osmocom.org/sdrangelove.git
|
2014-05-18 16:52:39 +01:00 |
|
kissengine.h
|
Reorganized sdrbase library code
|
2016-03-08 04:54:12 +01:00 |
|
kissfft.h
|
Reorganized sdrbase library code
|
2016-03-08 04:54:12 +01:00 |
|
lowpass.cpp
|
git clone git://git.osmocom.org/sdrangelove.git
|
2014-05-18 16:52:39 +01:00 |
|
lowpass.h
|
Reorganized sdrbase library code
|
2016-03-08 04:54:12 +01:00 |
|
misc.h
|
Reorganized sdrbase library code
|
2016-03-08 04:54:12 +01:00 |
|
movingaverage.h
|
Moving average fixes
|
2017-01-15 11:26:11 +01:00 |
|
nco.cpp
|
SSB Modulator: Interim state (4)
|
2016-12-13 19:57:07 +01:00 |
|
nco.h
|
SSB Modulator: Interim state (4)
|
2016-12-13 19:57:07 +01:00 |
|
ncof.cpp
|
NCO: standardized debug message
|
2017-02-25 11:32:18 +01:00 |
|
ncof.h
|
Added a NCO with floating point phase calculation before conversion to int for table indexing. This increases frequency precision and is mandatory for CTCSS tone generator
|
2016-12-19 02:41:31 +01:00 |
|
nullsink.cpp
|
Deep redesign: phase #2
|
2015-08-14 05:00:28 +02:00 |
|
nullsink.h
|
RxTx semantic move: renamed SampleSink to BasebandSampleSink
|
2016-10-02 22:29:04 +02:00 |
|
phasediscri.h
|
NFM demod: new discriminator
|
2017-01-30 23:28:06 +01:00 |
|
phaselock.cpp
|
Updated CMake files for QTEditor cmake style.
|
2016-06-29 10:10:24 +02:00 |
|
phaselock.h
|
Reorganized sdrbase library code
|
2016-03-08 04:54:12 +01:00 |
|
pidcontroller.cpp
|
git clone git://git.osmocom.org/sdrangelove.git
|
2014-05-18 16:52:39 +01:00 |
|
pidcontroller.h
|
git clone git://git.osmocom.org/sdrangelove.git
|
2014-05-18 16:52:39 +01:00 |
|
samplesinkfifo.cpp
|
RxTx semantic move: updated debug message and displayed class names
|
2016-10-08 10:35:07 +02:00 |
|
samplesinkfifo.h
|
RxTx semantic move: renamed SampleFifo to SampleSinkFifo
|
2016-10-06 19:18:02 +02:00 |
|
samplesinkfifodecimator.h
|
Tx ph.2: Templatized IntHalfbandFilter and improved coefficients. Changed to order 80 for upsamplers and 48 for downsamplers
|
2016-10-29 17:01:02 +02:00 |
|
samplesinkfifodoublebuffered.cpp
|
Added a double buffered sample sink FIFO class
|
2016-10-06 15:39:18 +02:00 |
|
samplesinkfifodoublebuffered.h
|
Added a double buffered sample sink FIFO class
|
2016-10-06 15:39:18 +02:00 |
|
samplesourcefifo.cpp
|
Sample source FIFO: write ahead the exact same amount of samples that were read. This smoothes out the process and avoids hickups
|
2017-01-09 02:13:27 +01:00 |
|
samplesourcefifo.h
|
Multiple modulators support: works with two modulators
|
2016-12-26 12:11:51 +01:00 |
|
scopevis.cpp
|
Scope: block incoming traces (trigger) while in trace memory
|
2016-04-01 04:42:47 +02:00 |
|
scopevis.h
|
RxTx semantic move: renamed SampleSink to BasebandSampleSink
|
2016-10-02 22:29:04 +02:00 |
|
scopevisng.cpp
|
New scope: pass time base to ScopeVis
|
2017-02-26 04:55:15 +01:00 |
|
scopevisng.h
|
New scope: pass time base to ScopeVis
|
2017-02-26 04:55:15 +01:00 |
|
spectrumscopecombovis.cpp
|
Deep redesign: use references for the iterator parameters of the sample sinks feed method
|
2015-08-25 08:24:23 +02:00 |
|
spectrumscopecombovis.h
|
RxTx semantic move: renamed SampleSink to BasebandSampleSink
|
2016-10-02 22:29:04 +02:00 |
|
spectrumscopengcombovis.cpp
|
New scope: interim state (1)
|
2017-01-29 19:51:45 +01:00 |
|
spectrumscopengcombovis.h
|
New scope: interim state (1)
|
2017-01-29 19:51:45 +01:00 |
|
spectrumvis.cpp
|
RxTx semantic move: renamed SampleSink to BasebandSampleSink
|
2016-10-02 22:29:04 +02:00 |
|
spectrumvis.h
|
RxTx semantic move: renamed SampleSink to BasebandSampleSink
|
2016-10-02 22:29:04 +02:00 |
|
threadedbasebandsamplesink.cpp
|
TX ph.1: Baseband sample sources and Device sample sinks (1)
|
2016-10-14 18:47:19 +02:00 |
|
threadedbasebandsamplesink.h
|
TX ph.1: Baseband sample sources and Device sample sinks (1)
|
2016-10-14 18:47:19 +02:00 |
|
threadedbasebandsamplesource.cpp
|
Modulators: changed single Tx channel samples feed handling
|
2016-12-22 23:39:06 +01:00 |
|
threadedbasebandsamplesource.h
|
Multiple modulators support: works with two modulators
|
2016-12-26 12:11:51 +01:00 |
|
upchannelizer.cpp
|
Modulators: changed single Tx channel samples feed handling. Pure virtual function is useless
|
2016-12-22 23:45:56 +01:00 |
|
upchannelizer.h
|
All modulators: use buffer for input audio that is always in use while generation is running. This fixes lockup problem reported in issue #11
|
2016-12-26 01:39:34 +01:00 |
