Commit Graph

204 Commits

Author SHA1 Message Date
Joe Taylor
94645ac24c Fix problem with "Tune" at startup. status
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3174 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-15 23:42:42 +00:00
Joe Taylor
3ed5f2ec35 Backed out the changes from r3171 to r3172 -- too buggy at present.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3173 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-15 21:13:31 +00:00
Joe Taylor
b02d298518 1. CAT control now working with calls to hamlib functions.
Needs testing!!!
2. Added "Test CAT Control" and "Test PTT" buttons on 
   Setup | Configuration screen.  (Must fix flaky behavior of calls to ptt().)


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3172 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-15 20:20:06 +00:00
Joe Taylor
7bc09300eb Add instructional labels to Tab 2.
Reset m_repeatMsg=0 on Tx Halt, etc.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3171 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-15 16:06:22 +00:00
Joe Taylor
57d8bb4fd9 Starting to implement direct calls to hamlib functions, rather than
using rigctl in a separate process.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3170 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-15 00:28:27 +00:00
Joe Taylor
f88c0aad81 One more try at getting the decoded line lengths right. Should be
OK in Linux, too -- CHECK THIS -- and keeps the message string at 
length 22, as required for JT65.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3160 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-12 14:20:05 +00:00
Joe Taylor
fc65d318dd Max size of several widgets made larger to accommodate people who set
system fonts larger than the default.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3152 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-10 18:00:33 +00:00
Joe Taylor
d2d0583e5a 1. Fix end-of-transmission logic so that CW ID works again.
2. Much better logic for choosing frequencies at which to attempt decodes.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3143 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-09 20:59:53 +00:00
Joe Taylor
cd15a5e4d6 1. Click on spectrum sets Rx freq; double-click also invokes narrow-band
decoder at the new frequency.  CTRL-click (or CTRL-double-click) sets both 
Rx and Tx freqs.
2. Amplitude at end of transmission is ramped down to prevent a "key click".


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3139 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-09 15:16:34 +00:00
Joe Taylor
9ded5bf6af 1. Decode button does only the "quick decode" at QSO frequency.
2. Correct a logic error in new Tx-message-selection code.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3136 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-08 21:01:30 +00:00
Joe Taylor
574c2511f5 1. New controls for selecting Tx messages now functioning correctly?
2. Double-click on decoded message sets Tx Enable.
3. Implemented a runaway Tx watchdog.
4. Added a spinbox for S/N report.
5. Implemented correct message formats for compound callsigns.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3135 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-08 18:31:21 +00:00
Joe Taylor
7f8f9ed528 "Clear call and grid after logging" is now optional.
Option to display distance in miles.
Remove (or reduce?) negative red spikes at start of Rx period.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3128 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-03 21:32:21 +00:00
Joe Taylor
a4f82521bd Correct a flaw in decoder(); do some code cleanup.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3127 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-03 20:42:12 +00:00
Joe Taylor
c23fd176b8 Implemented the "nqd=1,0,-1" logic for decoding.
Plot scale now marks the decoding range in blue, Rx freq range in green, 
and Tx frew range in red.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3126 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-03 20:21:00 +00:00
Joe Taylor
7f72925679 First try at changing Tol to fMin and fMax. More work still to be done!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3125 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-03 16:44:31 +00:00
Joe Taylor
461fdd79aa 1. Blank lines between decoding periods now optional.
2. "CQ DX" is now treated properly when the decoded line is double.clicked.
3. Displayed sync values reduced by 1/2.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3124 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-03 15:35:11 +00:00
Joe Taylor
e956a01e95 Fix pack/unpack bugs reported by VE5VA.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3121 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-02 16:37:10 +00:00
Joe Taylor
a36155e316 Write all decodes to file 'decoded.txt'. Unlike ALL.TXT, this file is not
cumulative; each invocation of the decoder starts the file anew.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3118 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-02 13:49:52 +00:00
Joe Taylor
4544824f30 Another adjustment to the trade-off between decoding time and sensitivity.
If CTRL is held down when double-clicking on a decode, the QSO freq (
both Rx and Tx) will be reset even if the first decoded callsign is MyCall.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3109 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-03-26 15:59:23 +00:00
Edson W. R. Pereira
a1083d17b3 1. Fixed issue with jt9 process not sleeping under Linux.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3103 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-03-26 14:00:51 +00:00
Edson W. R. Pereira
fea674de12 1. Added comport list as per OS type
2. Adjusted layout od devsetup dialog


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3100 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-03-25 20:42:25 +00:00
Joe Taylor
0516a86dd8 1. Tweak the DialFreq label; remove similar label from Wide Graph window.
2. Add a tab for Default Frequencies on Setup window.
3. Update Makefile.MinGW
4. Bump version number to 0.8.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3097 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-03-25 19:13:49 +00:00
Joe Taylor
7515725c63 Added the source code for morse().
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3093 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-03-25 12:17:21 +00:00
Joe Taylor
12523c42a4 Implemented CW ID.
Signal reports 0 dB and above now displayed as "+03", "+16", etc.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3089 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-03-25 01:24:47 +00:00
Joe Taylor
5a5cc2d51d Update Linux Makefile
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3076 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-03-23 15:43:39 +00:00
Joe Taylor
62648d2e70 Display Az and Dist when "hisGrid" is known and valid.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3075 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-03-23 15:41:31 +00:00
Edson W. R. Pereira
eefb14473a Adjusted the code to make it compile and run under Linux.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3074 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-03-23 15:35:32 +00:00
Joe Taylor
377339a185 Increase values of "limit" in decoder.f90.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3073 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-03-23 13:31:33 +00:00
Joe Taylor
71ca3fc1c0 LogQSO now has a confirmation step where you can edit the log entries.
Tx macros are now enabled.
Bug in decoder fixed.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3068 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-03-21 22:58:16 +00:00
Joe Taylor
58ca11109c Update Makefile.linux
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3065 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-03-21 14:44:22 +00:00
Joe Taylor
250623517b Import Edson's Linux setup code for audio devices from WSPR-X.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3064 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-03-21 14:14:26 +00:00
Joe Taylor
53c6c15937 Fix minor bug in decoder.f90: should always try i==ipk!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3063 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-03-20 14:31:02 +00:00
Joe Taylor
f23a3ceab1 Big improvement in decoding speed.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3059 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-03-19 17:26:45 +00:00
Joe Taylor
a360a64275 Combining wsjtx_rx.log and wsjtx_tx.log into ALL.TXT.
Implementing ADIF log.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3050 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-03-18 16:14:18 +00:00
Joe Taylor
45dcb4a4aa Uploads to PSKReporter are now working.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3044 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-03-11 19:43:06 +00:00
Joe Taylor
4b719a985d Implementing uploads to PSK Reporter. (Not yet finished.)
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3043 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-03-11 15:51:44 +00:00
Joe Taylor
0b8f2592a9 Update Makefile.linux.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3039 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-03-06 20:42:30 +00:00
Joe Taylor
e9e319da1e Message averaging and DS now fully integrated in wsjt24d.
Code cleanup and optimization still to be done!


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2970 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-01-23 19:54:54 +00:00
Joe Taylor
da63d02038 Code for JT4 deep search now working well. (Needs some fine tuning, though.)
Message averaging has been tested, works well also.
Next: need to integrate these features and back-port into WSJT9.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2969 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-01-23 16:25:07 +00:00
Joe Taylor
6119090bdc More cleanup of JT4 stuff.
Improvement of message averaging, by correcting a flaw.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2968 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-01-22 21:04:47 +00:00
Joe Taylor
025dd59fff Some cleanup of source-code comments.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2967 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-01-22 20:14:35 +00:00
Joe Taylor
3fae9c607c Starting to implement the JT4 modes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2966 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-01-22 19:19:00 +00:00
Joe Taylor
dd70cf8e8e Update Makefile.linux
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2959 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-01-18 16:08:53 +00:00
Joe Taylor
aeb9cf2618 Implemented "CQ DX " by disguising it as callsign "CQ9DX ".
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2791 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-12-11 18:50:07 +00:00
Joe Taylor
adc5a55962 Fixed the "DF6NM 73 K" bug in message packing.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2787 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-29 19:01:48 +00:00
Joe Taylor
292a15d9c3 Permit starting jt9.exe from a directory with embedded spaces.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2785 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-28 21:08:35 +00:00
Joe Taylor
c51a3333d9 Change the displayed "drift" to FFT bins per transmission length.
Re-activate "killbyname" on program startup.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2782 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-28 15:09:50 +00:00
Joe Taylor
e4577af5da Signal reports from -01 to -30 formatted as always; new formatting
for -50 to -31 and 0 to +49.
Change DialFreq to MHz.
Fix info saved to wsjt.log.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2781 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-28 14:33:18 +00:00
Joe Taylor
2e19f512ae Bring the "stand-alone" part of JT9 up to date.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2780 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-28 12:47:42 +00:00
Joe Taylor
807f673290 Permit signal reports in the range -50 to +49 dB
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2779 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-28 01:57:45 +00:00
Joe Taylor
d183afd95a Tweak to minimize spurious sync values (from QRN ??).
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2778 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-27 20:49:33 +00:00
Joe Taylor
faa6b9d7af Omitted a sqrt() by mistake.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2777 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-27 17:10:28 +00:00
Joe Taylor
f7c12d8390 Better way of estimating noise level for S/N measurements.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2776 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-27 16:48:50 +00:00
Joe Taylor
a7ea2745f2 Refactor the test9 routine into downsam9, peakdt9, symspec2, ...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2775 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-27 15:38:03 +00:00
Joe Taylor
7fe6ef1f61 Many changes: all-new JT9 decoder, supposedly faster and better.
Needs thorough testing, especially for drifting signals!


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2774 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-26 21:06:41 +00:00
Joe Taylor
4835dc0abc Subroutine test9() now does effective solution for DT.
Next: expand this into an afc65b-like loop solution for DT f0 f1 f2 (phi0?)


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2773 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-26 02:45:28 +00:00
Joe Taylor
c15a98004e Working on a better way to get DT, f0, f1, f2, ...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2772 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-25 20:34:41 +00:00
Joe Taylor
dc303a2d65 Free-text messages get trimmed to 13 chars and have pink background.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2771 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-24 17:03:54 +00:00
Joe Taylor
725c6bcbc0 Enable "Save synced" and "Save Decoded".
Clean up handling of DialFreq.
Put Date into wsjtx_rx.log.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2768 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-24 15:18:17 +00:00
Joe Taylor
696fc34512 Save all files, then possibly remove after decoding finishes.
Some code cleanup; remove unused code.
Add sub-mode number to wsjtx_rx.log.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2767 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-24 14:36:45 +00:00
Joe Taylor
b544efb9e5 Implement "nagain", etc.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2761 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-21 21:08:17 +00:00
Joe Taylor
6eb1a1f542 Add jt9test. in case I want to use it. Remove old decode() function from
mainwondow.cpp.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2760 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-21 19:41:33 +00:00
Joe Taylor
3faa9cb525 Some tweaks to jt9 in standalone mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2759 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-21 18:27:49 +00:00
Joe Taylor
03a1715525 Update the Makefile
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2757 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-21 17:48:17 +00:00
Joe Taylor
f715ea6347 Now working with decoding done in a separate process, jt9.exe.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2756 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-21 17:42:53 +00:00
Joe Taylor
a2f60d92dd Get rid of multiple decodes of same signal.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2754 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-20 00:48:41 +00:00
Joe Taylor
ce0b04cb08 Use a dB scale for red(i).
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2753 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-19 23:46:44 +00:00
Joe Taylor
7f0ff9e46d Code cleanup.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2752 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-19 18:49:21 +00:00
Joe Taylor
d29eccaada Introduce nzhsym, the number of computed half-symbol spectra.
Correct the logic for computing lag range in sync9.f90.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2751 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-19 18:23:39 +00:00
Joe Taylor
545b2b2813 Correct the frequency-selection logic in decoder.f90.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2750 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-19 17:16:31 +00:00
Joe Taylor
91302a3575 Make ptt() consistent with the one in WSPR.
Correct a gray-coding flaw in spec9.f90.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2748 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-19 16:45:42 +00:00
Joe Taylor
16f6428e68 Minor tweaks to decoder.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2746 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-16 19:38:39 +00:00
Joe Taylor
71e7772607 Fix a bug in handling message lengths.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2745 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-16 18:25:27 +00:00
Joe Taylor
6c8d513e32 Update the Linux Makefile.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2740 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-16 15:50:47 +00:00
Joe Taylor
16310339da Fix compiler warning message.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2739 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-16 15:49:09 +00:00
Joe Taylor
fc24f7b63f Include required header files.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2738 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-16 15:48:31 +00:00
Joe Taylor
78610586fc Add nlim to decoded text lines in wsjtx_rx.log.
Increase amplitude of red curve.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2736 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-15 23:40:57 +00:00
Joe Taylor
b0c0af3a87 Don't let index exceed array bounds.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2735 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-15 16:43:42 +00:00
Joe Taylor
d24842271b Put nlim ar end of lines in wsjtx_rx.log.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2734 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-15 16:39:41 +00:00
Joe Taylor
b1da27a080 Tweaks to jt9code.
Fix reports generated by double-click on callsign.
Collapse consecutive spaces in message to a single space.
Look at best element in ccfred first; then zap nearby ones; then repeat.
Display sqrt(red(i)) in waterfall.
Step by 4 (or 2) in peakdt9, then zero in on the peak.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2733 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-15 16:34:14 +00:00
Joe Taylor
b6758df910 Add timer.f90
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2732 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-15 13:37:40 +00:00
Joe Taylor
eeb9a38fbd Another try at scaling gthe red curve.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2731 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-14 18:19:36 +00:00
Joe Taylor
c657ffdf41 Tweaking the scaling of red curve.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2730 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-14 17:17:02 +00:00
Joe Taylor
6012a0c7a0 Clean up compiler warnings.
Better definition of "red()" for waterfall plot.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2729 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-14 17:02:54 +00:00
Joe Taylor
3285497494 Save the new Makefile, with Fortran flag -O0.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2728 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-14 15:31:21 +00:00
Joe Taylor
05322bb4f2 Correct UTC on waterfall for slow modes.
Tweak some GUI widget placements.
Send stderr to file wsjtx.log.
Fix formatting of std message with "R -7", etc., to "R-7".
Introduce calls to "timer".
Remove console.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2727 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-14 15:30:21 +00:00
Joe Taylor
26bba5d24d Remove "save" statements. They were not needed, and (possibly) led to
program crashes.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2725 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-14 01:19:13 +00:00
Joe Taylor
667631106f Increase height of status-bar labels.
Compute samfac values; put them into "lab5" (for K1JT only).
Ransomize the rand() seed on SoundOutThread startup.
Increase the DT search range.  (This still needs optimization.)



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2724 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-13 20:23:03 +00:00
Joe Taylor
68aec4f22d Working on decoding issues...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2723 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-13 15:55:03 +00:00
Joe Taylor
db583457b7 Remove unnecessary test on ja.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2721 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-12 21:09:32 +00:00
Joe Taylor
64c02c432c Believe I've fixed the "ihsym-3" bug. Needs thorough testing!!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2720 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-12 21:06:31 +00:00
Joe Taylor
335536b6ec Go back to old version of pctile, using a full sort.
Better calc of snrdb, especially for strong signals.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2719 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-12 18:28:28 +00:00
Joe Taylor
0348b93a5e Much code cleanup: remove unised variables and code.
Include # channels in audio device offerings.
Start implementing "msgsent" correctly.  (Not finished!)
Include Date in UTC display.
Use the properly computer snrdb.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2718 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-12 16:33:45 +00:00
Joe Taylor
520f74bdc0 Add a decent calculation of snrdb for a synced signal.
Bring jt9.f90 up to date.
Bump version number to 0.3.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2717 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-06 21:28:59 +00:00
Joe Taylor
d597a77260 Metric bias now needs to be put back where it should be.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2716 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-06 20:27:08 +00:00
Joe Taylor
821bd120ca Correct a scaling error in spec9. Should improve decoding significantly!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2715 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-06 19:49:19 +00:00
Joe Taylor
a84c3a8c5d Updates to Users Guide.
Double-click on waterfall sets Tol to a reduced (mode-dependent) value.
Tol is saved/restored on program restart.
Added digital gain slider for setting input level.
Garbage decode "15P6715P67WCV" is rejected.
Arrays ss and c0 are copied and saved when newdat=1.  Further processing is
done on the copies.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2712 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-11-01 19:54:40 +00:00
Joe Taylor
38867d68fb Remove diagnostic print.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2711 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-10-31 19:23:10 +00:00
Joe Taylor
38b1f4df20 Oops! Fix def'n of contingent xmed in sync9.f90.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2710 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-10-31 19:21:46 +00:00
Joe Taylor
15edace930 Add control of decoding "depth".
Improve the way pctile gets an estimate of array median.
Put info for mettab() into a data statement.
Attempt decoding near all freqs that give sync >= 1.0
Remove killbyname


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2707 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2012-10-31 18:33:56 +00:00