Added more install files and removed installation of old docs.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3846 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Note to developers: Not sure about the makefiles...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3835 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
For example the location of the Qt installation can be specified by
overriding the Makefile variable QT_DIR like:
mingw32-make -f Makefile.MinGW QT_DIR=C:\Qt\5.2.1\mingw48_32
the default uses the g95 Fortram compiler, if you have gfortran
installed and on the PATH then you can override the FC variable like:
mingw32-make -f Makefile.MinGW FC=gfortran
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3780 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
5. F7 now toggles the Setup menu item "Double-click on call sets
Tx Enable". Present state is written to Status Bar label 3.
The present commit updates the makefiles.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3673 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. Change "Appendix x" section headings to useful descriptions.
3. Add KB1ZMX and W4TI to the WSJT-X "About" screen and Acknowledgments
in the User's Guide. (Hope I didn't forget anyone -- please advise
if I did!)
4. A few more minor tweaks to User's Guide
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3672 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
bad data.
2. Fix a bug that could allow a Koetter-Vardy false decode instead of
a valid Berlekamp-Massey decode, sometimes leading to program crash.
3. Many more edits in the User's Guide, *.adoc files.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3664 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
applicable, JT65v2 otherwise. Thanks to DL9RDZ!
2. Fix a bug in flat3.f90, evident on OSX systems. Thanks to G4KLA!
3. The Makefile now copy the jt9code executable into the destination
directory for to-be-packaged executables.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3648 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Added code to flush any queued spots to PSKReporter prior to a band change. This should prevent spots being reported on a wrong band.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3647 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Add -DUNIX flag to FFLAGS in Makefile.linux.
Tweak the use of framesAfterDownsample in Detector.cpp.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3631 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Please note that I removed the option "-mno-stack-arg-probe" from CFLAGS.
Was there any good reason for it still being there?
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3582 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. Clear the "Name" field after logging a QSO.
3. Add fil4.f90, a subroutine for downsampling from 48000 Hz to 12000 Hz
sample rate. (Not yet incorporated in WSJT-X, but intended to be called
from arounf line 51 in Detector.cpp.)
4. Minor updates to User's Guide.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3570 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. Remove offending redefinition of "struct timezone" in timeval.h, it's
no longer needed. (Let me know if this breaks anyone's build procedure!!)
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3552 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
It's necessary to convey "appDir" from the GUI to jt9, so that jt9
can find the .lock and .quit files.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3551 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Audio input can be mono, left of stereo pair or, right of stereo
pair. Audio output can be mono, left of stereo pair, right of stereo
pair or, both of stereo pair (the same output goes to both channels in
both mode). Settings are remembered between sessions.
Stream channel suport is implemented mainly in the new AudioDevice
class which is now the base class of Modulator and Detector.
Audio channels are selected on the configuration screen. Only
supported channel configurations per device can be selected.
Audio output volume (actually attenuation) is now possible from the
GUI. I have added a slider control to the main window; I don't
necessarily propose this as a final release location for the widget as
I understand that changes to the main screen are sensitive. This
location is just a starting suggestion for a trial. The volume
(attenuation) setting is remembered between sessions and is not device
dependent. This addresses all issues of volume setting on *nix
versions since there is no need to use pavucontrol to set audio
levels. The volume (attenuation) action is logarithmic.
Shaped CW keying has been implemented in Modulator although it is
currently disabled as I am not 100% happy wth the implementation. If
you want to try it define the C++ preprocessor macro WSJT_SOFT_KEYING
in your build.
The Modulator instance has been moved to the same thread as the
SoundOutput instance as it should have been since the output callback
already operates in that thread. Cross thread slots are now correctly
called in a thread safe way as a result.
A number of files where in the SVN repository with DOS line endings
which I have removed. SVN users on Windows need set the config for
native line endings so that DOS line endings are automatically
stripped on checkin.
The DevSetup class now holds it's UI o the heap to reduce imapact on
build dependencies.
The application settings are now passed to objects from the main.cpp
file. Management of settings are moved to the responsible classes (top
level windows). This has involved a few settings moving groups so
users will see some settings reverting to default values on the first
run of an update.
Persistance of top level windows geometry and position is now handled
in the recommened manner (constructor for load, closeEvent for store
in modal windows and, hideEvent for store in modeless dialogs).
The MainWindow class now holds its children as members rather than
global variables.
The LogQSO class now hides its implementation and takes responsibility
for its own settings and widows rendering parameters. A new settings
file group is implemented to persist the LogQSO class settings.
The WideGraph class now hides its implementation and manages its own
settings and window rendering parameters.
--This line, and those below, will be ignored--
M Modulator.cpp
M rigclass.cpp
M widegraph.cpp
M signalmeter.cpp
M soundin.cpp
M soundout.cpp
M mainwindow.h
M main.cpp
M meterwidget.h
M devsetup.cpp
M mainwindow.ui
M Detector.cpp
M logqso.h
M rigclass.h
M mainwindow.cpp
M meterwidget.cpp
M soundin.h
M devsetup.ui
M wsjtx.pro
M devsetup.h
M logqso.cpp
M Modulator.hpp
M psk_reporter.cpp
M killbyname.cpp
M Detector.hpp
M signalmeter.h
M widegraph.h
M psk_reporter.h
M soundout.h
M PSKReporter.h
M lib/afc65b.f90
M lib/gran.c
M lib/usleep.c
M lib/afc9.f90
M lib/wrapkarn.c
A AudioDevice.hpp
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3542 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. Fix jt9 so that decoding starts at fStart (which now may be non-zero).
3. Improved or new Tool Tips for some GUI controls.
4. Updates to User's Guide.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3540 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Currently only Qt5 or above is known to work with this code. It may be
possible to backport it to Qt4 if required.
Audio output goes back to a separate thread to try and minimize
stutters in streaming on Windows particularly.
A crash on Linux due to mishandling of stereo audio output has been
fixed and both left and right channels are now correctly synthesised
with identical contents.
Rigs are enumerated directly from hamlib API rather than running a sub
process reading output of rigctl -l. This was initially done to get
rid of some GUI thread blocking in the configuration dialog, but is
generally a better way of doing it anyway.
Some refactoring in MainWindow to accomodate the audio streaming,
modulation and detecting classes.
Exit handling for application refactored to use signals rather than
brute force event loop exit. This was required to get correct thread
shutdown semantics.
The GUI update timer is now stopped during application shutdown which
is necessary to stop crashes when shutting down gracefully with
signals and window close() calls.
There is an outstanding issue with Linux audio streams; the QAudio
Input/Output classes create a new stream name each time a stream is
started. This doesn't play well with PulseAudio utilities such as
pavucontrol to set stream volume as settings are lost every tx
period. I have tried to keep a single stream for all output but there
are problems restarting it that haven't been resolved yet.
The QtCreator project file has been rearranged a little because it
passes all the object files to the linker rather than using an archive
library. Since the GNU linker is single pass; the object files need to
be in a logical order with definitions appearing afer references to
them. This was required to avoid a linking error.
The lib/Makefile.linux has been enhanced to use the fortran compiler
to locate the correct version of the Fortran library to use. This is
necessary on the latest Linux distros because the unversioned symlink
to compiler support libraries is no longer provided. This only an
issue with mixed programming language links where the linker driver
for one language has to link support libraraies for another language.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3532 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Qt's built-in QAudio calls rather than PortAudio. Also includes some
refactoring of the arrangement for these calls, and more use of C++ style.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3523 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The old Makefile.MinGW has been renamed Makefile.MinGW.qt4.
Be sure to check settings in lines 13-19 of wsjtx.pro.
Soon to come: Permanent changeover from PortAudio to QAudio ?
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3521 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Running multiple instances now checked out in Linux, as well as Windows.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3496 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
and if CTRL is held down it should set Tx as well as Rx freq. Fixed.
2. Improve the logic for suppressing duplicate JT65 decodes.
3. Disable the "Advanced" item on Setup menu.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3491 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Use ptt_() function included in getfile.cpp.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3465 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
1. Correct the TxMode label on program startup.
2. Insert TxMode (not RxMode) into the "Transmitting..." lines in ALL.TXT.
3. Put TxMode in wsjtx_status.txt.
4. F4 clears Az, Dist, and all Tx messages as well as DxCall and DxGrid.
5. Make it possible to decode JT9 in the "JT65 region", and vice-versa, with
directed double-click on signal in waterfall.
6. Improved logic for enabling/disabling TestPTT button on setup screen.
7. Do not call getFreq() when TestPTT is activated under CAT control.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3463 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. Fix two more g95 compiler warnings.
3. Remove some unused code in getfile.cpp.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3305 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
jt9a.F90 in order to suppress a compiler warning.
2. Updated Makefile.linux.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3300 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
memory region smaller by some 150 MB.)
2. Some code cleanup (removing unused lstrong, etc.)...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3283 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. Re-establish the pxdb measurement for Thermo.
3. Double-click on decoded line copies it to QSO window (unless it's
already there).
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3276 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
This commit will serve as a benchmark for comparison with new code to
be written.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3266 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
UPdate Makefile.MinGW.
Much work new on User's Guide.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3251 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
is decoded.
2. Fixed minor bug in the "Test PTT" function.
3. Background of DialFrequency label goes red if frequency differs from
default for this band by mode than 10 kHz.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3208 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
OK in Linux, too -- CHECK THIS -- and keeps the message string at
length 22, as required for JT65.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3160 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. Much better logic for choosing frequencies at which to attempt decodes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3143 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
decoder at the new frequency. CTRL-click (or CTRL-double-click) sets both
Rx and Tx freqs.
2. Amplitude at end of transmission is ramped down to prevent a "key click".
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3139 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. Correct a logic error in new Tx-message-selection code.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3136 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Option to display distance in miles.
Remove (or reduce?) negative red spikes at start of Rx period.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3128 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Plot scale now marks the decoding range in blue, Rx freq range in green,
and Tx frew range in red.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3126 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. "CQ DX" is now treated properly when the decoded line is double.clicked.
3. Displayed sync values reduced by 1/2.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3124 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
cumulative; each invocation of the decoder starts the file anew.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3118 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
If CTRL is held down when double-clicking on a decode, the QSO freq (
both Rx and Tx) will be reset even if the first decoded callsign is MyCall.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3109 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. Add a tab for Default Frequencies on Setup window.
3. Update Makefile.MinGW
4. Bump version number to 0.8.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3097 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Signal reports 0 dB and above now displayed as "+03", "+16", etc.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3089 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Tx macros are now enabled.
Bug in decoder fixed.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3068 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Code cleanup and optimization still to be done!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2970 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Message averaging has been tested, works well also.
Next: need to integrate these features and back-port into WSJT9.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2969 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Improvement of message averaging, by correcting a flaw.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2968 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Re-activate "killbyname" on program startup.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2782 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
for -50 to -31 and 0 to +49.
Change DialFreq to MHz.
Fix info saved to wsjt.log.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2781 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Needs thorough testing, especially for drifting signals!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2774 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Next: expand this into an afc65b-like loop solution for DT f0 f1 f2 (phi0?)
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2773 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Clean up handling of DialFreq.
Put Date into wsjtx_rx.log.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2768 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Some code cleanup; remove unused code.
Add sub-mode number to wsjtx_rx.log.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2767 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Correct the logic for computing lag range in sync9.f90.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2751 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Fix reports generated by double-click on callsign.
Collapse consecutive spaces in message to a single space.
Look at best element in ccfred first; then zap nearby ones; then repeat.
Display sqrt(red(i)) in waterfall.
Step by 4 (or 2) in peakdt9, then zero in on the peak.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2733 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Better definition of "red()" for waterfall plot.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2729 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Tweak some GUI widget placements.
Send stderr to file wsjtx.log.
Fix formatting of std message with "R -7", etc., to "R-7".
Introduce calls to "timer".
Remove console.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2727 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Compute samfac values; put them into "lab5" (for K1JT only).
Ransomize the rand() seed on SoundOutThread startup.
Increase the DT search range. (This still needs optimization.)
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2724 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Better calc of snrdb, especially for strong signals.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2719 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Include # channels in audio device offerings.
Start implementing "msgsent" correctly. (Not finished!)
Include Date in UTC display.
Use the properly computer snrdb.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2718 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Bring jt9.f90 up to date.
Bump version number to 0.3.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2717 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Double-click on waterfall sets Tol to a reduced (mode-dependent) value.
Tol is saved/restored on program restart.
Added digital gain slider for setting input level.
Garbage decode "15P6715P67WCV" is rejected.
Arrays ss and c0 are copied and saved when newdat=1. Further processing is
done on the copies.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2712 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Improve the way pctile gets an estimate of array median.
Put info for mettab() into a data statement.
Attempt decoding near all freqs that give sync >= 1.0
Remove killbyname
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2707 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Disable some presently un-implemented controls.
Begin implemnting "Save Synced" and "Save Decoded".
Set compilation to CONSOLE mode.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2706 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Fixed the "long decode time" problem.
Leading blanks in Tx message are now ignored.
Decodes of callsign '000AAA ' are now suppressed.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2704 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Decode mjultiple signals inside the "Tol" green bar, rather than just the
one producing highest value of sync.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2701 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Move the ptt function into the Qt-managed code.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@2699 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
