Commit Graph

1005 Commits

Author SHA1 Message Date
Joe Taylor
57d8bb4fd9 Starting to implement direct calls to hamlib functions, rather than
using rigctl in a separate process.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3170 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-15 00:28:27 +00:00
Edson W. R. Pereira
d734aca363 Added PSK_Reporter cpp and header file skeletons
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3169 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-14 15:09:35 +00:00
Joe Taylor
c94eb2ff4b Added "Tune" button.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3168 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-14 14:11:20 +00:00
Joe Taylor
46a780e7f1 CAT control now reads and follows changes in radio Dial Frequency.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3167 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-13 18:51:25 +00:00
Joe Taylor
2f709bcce0 Disable "Save synced", it's not presently implemented.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3166 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-13 15:53:08 +00:00
Edson W. R. Pereira
6d9f896b33 Moved Portaudio initialization to the main function.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3165 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-13 15:22:12 +00:00
Joe Taylor
ace7ab228e Don't start a transmission more than 24 sec into the Tx period.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3164 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-13 15:18:29 +00:00
Edson W. R. Pereira
ee55040005 Moved initialization of shared memory segment to the main funcion in order to exit gracefully in case of errors.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3163 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-13 12:28:03 +00:00
Joe Taylor
2edf0aebd4 Test m_tx2QSO before writing Tx message to QSO window.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3162 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-13 01:53:24 +00:00
Joe Taylor
5483e378b0 1. Option to send Tx message (highlighted in yellow) to QSO window.
2. Setup | Options changed to Setup | Configuration
3. Alt-V causes save-to-file of the most recently completed Rx sequence.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3161 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-12 17:57:20 +00:00
Joe Taylor
f88c0aad81 One more try at getting the decoded line lengths right. Should be
OK in Linux, too -- CHECK THIS -- and keeps the message string at 
length 22, as required for JT65.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3160 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-12 14:20:05 +00:00
Joe Taylor
fa2a145ea9 Working on User's Guide.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3159 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-12 02:05:47 +00:00
Joe Taylor
1fc57214ca Fix the truncation of characters 17 and 18 in decoded messages.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3158 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-11 22:53:30 +00:00
Joe Taylor
6cd932fada Correct the logic for Runaway Tx Watchdog.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3157 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-11 20:59:17 +00:00
Joe Taylor
a707c246cc Fix bug with an unlikely user-formatted message.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3156 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-11 18:39:05 +00:00
Joe Taylor
f9747c91b3 1. Erase button: click once to erase QSO window, twice to erase both.
2. New Setup options: "Tx disabled after sending 73" and "Runaway Tx watchdog".
3. Keyboard shortcuts:
   Alt-D: decode again at QSO frequency (same as Decode() button)
   Shift-D: full decode again, both windows
   Alt-E: Erase()
   Ctrl-F: Edit free text message
   Alt-H: Halt Tx()
   Alt M: Monitor()
   Alt-N: Enable Tx()
   Alt-Q: Log QSO
   Alt-S: Stop()


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3155 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-11 16:51:57 +00:00
Joe Taylor
524cc7f705 Don't overwrite call3.txt on program upgrade.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3154 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-11 01:10:40 +00:00
Joe Taylor
a4a1510e26 Fix the saving of "m_rptRcvd", which got broken a few revisions ago.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3153 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-10 20:01:17 +00:00
Joe Taylor
fc65d318dd Max size of several widgets made larger to accommodate people who set
system fonts larger than the default.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3152 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-10 18:00:33 +00:00
Joe Taylor
6fee99a1d6 Clean up the transition from JT9 tones to CW ID.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3151 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-10 15:50:40 +00:00
Joe Taylor
119b2ed43b 1. Send values of fMin, fMax, to the jt9 decoder.
2. Option for user to set default fonts.
3. Minor tweaks to GUI appearance.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3150 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-10 14:41:16 +00:00
Joe Taylor
76623ca749 Do not insert blank line when nagain=1.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3149 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-10 01:54:45 +00:00
Joe Taylor
dabd1d9aa9 1. Another anjustment to the "Tab 2" layout.
2. Blank line between periods should be in the RIGHT window!


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3148 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-10 01:09:19 +00:00
Edson W. R. Pereira
1dfc5a05ef GUI Layout adjustments
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3147 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-09 22:59:15 +00:00
Edson W. R. Pereira
6f7d4e65f7 Adjusted Layout
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3146 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-09 22:55:25 +00:00
Edson W. R. Pereira
eafa3a120b Adjusted Layout
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3145 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-09 22:35:20 +00:00
Edson W. R. Pereira
e9a69c455e Adjusted layout
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3144 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-09 22:34:40 +00:00
Joe Taylor
d2d0583e5a 1. Fix end-of-transmission logic so that CW ID works again.
2. Much better logic for choosing frequencies at which to attempt decodes.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3143 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-09 20:59:53 +00:00
Joe Taylor
ac6f986dc9 Corrected the logic for when Tx freq is changed after double-clicking on
a decoded texdt line.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3142 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-09 17:52:44 +00:00
Joe Taylor
e0a8592fcd Bump version number to 0.9.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3141 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-09 15:42:30 +00:00
Joe Taylor
4fbea5518b Remove diagnostic print.
Shouls have mentioned in last commit:
3. Narrow-band decode always uses the "deepest" parameters.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3140 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-09 15:21:59 +00:00
Joe Taylor
cd15a5e4d6 1. Click on spectrum sets Rx freq; double-click also invokes narrow-band
decoder at the new frequency.  CTRL-click (or CTRL-double-click) sets both 
Rx and Tx freqs.
2. Amplitude at end of transmission is ramped down to prevent a "key click".


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3139 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-09 15:16:34 +00:00
Joe Taylor
7b73e76b04 Color highlighting in left window is now optional.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3138 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-09 00:34:39 +00:00
Joe Taylor
182b944052 Don't apply background colors in the left ("QSO Freq") text window.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3137 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-09 00:19:41 +00:00
Joe Taylor
9ded5bf6af 1. Decode button does only the "quick decode" at QSO frequency.
2. Correct a logic error in new Tx-message-selection code.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3136 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-08 21:01:30 +00:00
Joe Taylor
574c2511f5 1. New controls for selecting Tx messages now functioning correctly?
2. Double-click on decoded message sets Tx Enable.
3. Implemented a runaway Tx watchdog.
4. Added a spinbox for S/N report.
5. Implemented correct message formats for compound callsigns.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3135 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-08 18:31:21 +00:00
Joe Taylor
56d49f985f Offer two sets of controls for entering and selecting Tx messages:
1. The "WSJT Traditional" setof six line-edit fields, radio buttons,
and Tx# buttons;

2. New configuration with buttons that generate each message for the
standard minimum QSO, one at a time.

NB: the logic for these buttons is not yet complete.



git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3134 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-08 01:50:49 +00:00
Edson W. R. Pereira
7d5bbf47c3 1. Moved fMin and fMax spin boxes to spectrum widget.
2. Adjusted mainwindow layout.
3. Added label at top level of decoded text widgets.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3133 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-05 16:48:10 +00:00
Edson W. R. Pereira
e5e9ea41ab Minor GUI layout adjustments.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3132 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-04 15:04:01 +00:00
Edson W. R. Pereira
d7fd5c78e0 Force version update.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3131 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-04 13:08:10 +00:00
Edson W. R. Pereira
7cda5208c0 Enabled layout manager on the MainWindow.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3130 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-04 13:07:15 +00:00
Joe Taylor
757fd241df Now have two decoded text boxes: left for decodes at QSO frequency, right
for everything else.
NB: I have screwed up the vertical expansion of mainwindow: growth occurs
at the bottom, rather than in the text boxes.  Help!


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3129 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-04 00:09:25 +00:00
Joe Taylor
7f8f9ed528 "Clear call and grid after logging" is now optional.
Option to display distance in miles.
Remove (or reduce?) negative red spikes at start of Rx period.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3128 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-03 21:32:21 +00:00
Joe Taylor
a4f82521bd Correct a flaw in decoder(); do some code cleanup.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3127 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-03 20:42:12 +00:00
Joe Taylor
c23fd176b8 Implemented the "nqd=1,0,-1" logic for decoding.
Plot scale now marks the decoding range in blue, Rx freq range in green, 
and Tx frew range in red.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3126 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-03 20:21:00 +00:00
Joe Taylor
7f72925679 First try at changing Tol to fMin and fMax. More work still to be done!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3125 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-03 16:44:31 +00:00
Joe Taylor
461fdd79aa 1. Blank lines between decoding periods now optional.
2. "CQ DX" is now treated properly when the decoded line is double.clicked.
3. Displayed sync values reduced by 1/2.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3124 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-03 15:35:11 +00:00
Joe Taylor
b0bdd95949 Prevent crash when transmitting a 2-word message.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3123 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-02 23:12:19 +00:00
Joe Taylor
e956a01e95 Fix pack/unpack bugs reported by VE5VA.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3121 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-02 16:37:10 +00:00
Joe Taylor
a36155e316 Write all decodes to file 'decoded.txt'. Unlike ALL.TXT, this file is not
cumulative; each invocation of the decoder starts the file anew.


git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3118 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-04-02 13:49:52 +00:00