f4exb
edfcb36dab
LimeSDR input: removed stream status debug messages
2017-04-20 00:48:00 +02:00
f4exb
80acb46b0d
LimeSDR input: increase FIFO progress bar height
2017-04-20 00:47:18 +02:00
f4exb
0c285315d9
LimeSDR input: set FIFO progress bar stylesheet properly
2017-04-20 00:37:46 +02:00
f4exb
b8174714ff
LimeSDR: suspend buddies threads if changing critical values
2017-04-20 00:01:11 +02:00
f4exb
44e00e4aeb
LimeSDR input: start or stop thread only if not started or stopped
2017-04-19 23:07:32 +02:00
f4exb
2c5ea336da
LimeSDR input: status bar updated
2017-04-19 22:43:18 +02:00
f4exb
db67e07ab9
LimeSDR input: implemented basic stream reporting
2017-04-19 18:41:55 +02:00
f4exb
1a1c793014
LimeSDR input: moved thread suspend before device configuration update
2017-04-19 08:34:27 +02:00
f4exb
5cd430c245
LimeSDR input: moved stream setup and destruciton in open and close device methods respectively
2017-04-19 08:19:09 +02:00
f4exb
0847a8464c
LimeSDR input: fixed message passing between buddies
2017-04-19 01:04:57 +02:00
f4exb
09981263bc
LimeSDR input: suspend thread for configuration only if in running state
2017-04-19 00:09:24 +02:00
f4exb
3621849027
LimeSDR input: corrected getSampleRate not to divide source sample rate by hardware decimation
2017-04-19 00:00:47 +02:00
f4exb
763175ab55
LimeSDR input: suspend thread while changing configuration
2017-04-18 23:26:30 +02:00
f4exb
54f3a51203
LimeSDR input: channel #0 streaming
2017-04-18 22:22:21 +02:00
f4exb
d3312c90d4
LimeSDR input: start and stop stream before and after the read loop. Use actual number of samples for callback
2017-04-18 13:56:05 +02:00
f4exb
65cccbdd75
LimeSDR input: perform automatic calibration after configuration change
2017-04-18 13:50:28 +02:00
f4exb
3d12ff1de0
LimeSDR input: hard decimation is not on the host side
2017-04-18 13:33:33 +02:00
f4exb
5fb05cbfad
LimeSDR input: more debug messages
2017-04-18 08:35:25 +02:00
f4exb
6dd66cb23c
Set limesdrinput.cpp line endings to Unix
2017-04-18 02:12:15 +02:00
f4exb
1a22772744
LimeSDR input: fixed DSP message not sent to self when sending to buddies
2017-04-18 02:10:37 +02:00
f4exb
d7acf6f1f9
LimeSDR input: GUI updates
2017-04-18 02:01:30 +02:00
f4exb
c07d4483e0
LimeSDR input: use a value dial for the analog lowpass filter
2017-04-18 01:16:39 +02:00
f4exb
35f7124a74
LimeSDR input: debug (2)
2017-04-18 00:50:03 +02:00
f4exb
0013ab89ea
Bugfix: make sure device is not open when attempting to closing it
2017-04-17 12:00:13 +02:00
f4exb
d9b6dde304
LimeSDR input: extract serial number from LMS info string
2017-04-17 11:50:09 +02:00
f4exb
54599c1231
LimeSDR input: debug (1)
2017-04-17 11:24:56 +02:00
f4exb
7d61557204
LimeSDR support: ready
2017-04-17 10:05:05 +02:00
f4exb
b1e12954c7
BladeRF input: cleaned up useless MessageReportBladeRF
2017-04-17 01:28:05 +02:00
f4exb
67a149ac06
LimeSDR support (13)
2017-04-17 01:10:32 +02:00
f4exb
92e7bb8eba
LimeSDR support (12)
2017-04-16 19:30:46 +02:00
f4exb
7c1ff7c5ad
LimeSDR support: removed Debian specifics from the build as it will use LimeSuite as an external package
2017-04-16 09:58:35 +02:00
f4exb
561baf975d
LimeSDR support (11) compiles
2017-04-16 04:58:52 +02:00
f4exb
6ed2fbee10
LimeSDR support (10)
2017-04-15 11:45:01 +02:00
f4exb
0204cca9e3
LimeSDR support (9)
2017-04-15 10:31:16 +02:00
f4exb
3fa6c06d6f
LimeSDR support (8)
2017-04-15 04:52:12 +02:00
f4exb
67bb7353a8
LimeSDR support (7)
2017-04-14 18:30:37 +02:00
f4exb
b8623c90ce
Refactoring: removed device parameter from all start() methods in sample source plugins
2017-04-14 03:40:45 +02:00
f4exb
1e086fb303
FCDPro+: open/close new style
2017-04-14 03:29:50 +02:00
f4exb
f456293b84
FCDPro: open/close new style
2017-04-14 03:24:21 +02:00
f4exb
b05897d221
SDRplay: open/close new style
2017-04-14 03:17:04 +02:00
f4exb
3fa28dab30
SDRPlay: use device sequence number from device API
2017-04-14 02:49:41 +02:00
f4exb
d001099f7e
SDRPlay: init thread on start
2017-04-14 02:46:52 +02:00
f4exb
c8146808a2
SDRplay: changed placement of input object creation in the GUI
2017-04-14 02:22:37 +02:00
f4exb
00cf437bf2
HackRF: changed placement of input object creation in the GUI
2017-04-14 02:16:04 +02:00
f4exb
0a29f34b94
HackRF: open device by serial number
2017-04-14 02:09:36 +02:00
f4exb
01b2c42a5f
BladeRF: open device by serial number
2017-04-14 01:59:09 +02:00
f4exb
651303e860
HackRF: Rx/Tx opem/close new style corrections
2017-04-14 01:49:48 +02:00
f4exb
dea2764811
HackRF: Rx/Tx opem/close new style
2017-04-14 01:41:02 +02:00
f4exb
ecdc99f59b
HackRF input: refactoring: device open close moved in the constructor and destructor respectively of the input object
2017-04-14 00:14:40 +02:00
f4exb
afaf3428f5
BladeRF: Rx/Tx opem/close new style
2017-04-13 23:40:14 +02:00
f4exb
922ee518b7
BladeRF input: changed placement of input object creation in the GUI
2017-04-13 20:32:10 +02:00
f4exb
5971c8a7ee
Airspy: fixed segfault when accessing non-initialized thread
2017-04-13 20:29:05 +02:00
f4exb
5dd934320c
BladeRF input: refactoring: device open close moved in the constructor and destructor respectively of the input object
2017-04-13 20:16:33 +02:00
f4exb
527b5ef2f5
LimeSDR support (6)
2017-04-13 18:18:15 +02:00
f4exb
bb812b4b47
Airspy: refactoring: device open close moved in the constructor and destructor respectively of the input object
2017-04-13 08:29:51 +02:00
f4exb
0c972455da
SDRDaemonFEC input: call input object destructor in GUI destructor (was missing)
2017-04-13 01:28:44 +02:00
f4exb
bb5fd95f33
RTL-SDR: refactoring: device open close moved in the constructor and destructor respectively of the input object
2017-04-13 01:21:25 +02:00
f4exb
934e73f7a7
RTL-SDR: moved input object creation at top of GUI comstructor
2017-04-12 23:41:30 +02:00
f4exb
2136dc7672
Sample source plugins: removed useless init pure virtual method
2017-04-12 23:10:22 +02:00
f4exb
371bf9a5ec
LimeSDR support (5)
2017-04-12 17:25:26 +02:00
f4exb
3e3fd44ac0
LimeSDR support (4)
2017-04-12 00:55:00 +02:00
f4exb
a2157a224f
Continuous sample rate setting: updated related plugins documentation
2017-04-09 20:30:01 +02:00
f4exb
5ba3dc89e8
HackRF input: GUI updates
2017-04-02 03:42:16 +02:00
f4exb
a7fabd5f58
RTLSDR plugin: fixed sample rate display and update
2017-04-02 03:34:03 +02:00
f4exb
b2e2c0a106
BladeRF input: continuous sample rate setting
2017-04-02 03:24:11 +02:00
f4exb
365154767a
RTLSDR plugin: continuous sample rate setting
2017-04-02 02:00:05 +02:00
f4exb
f91eba5b10
HackRF output: continuous sample rate setting
2017-04-02 00:23:02 +02:00
f4exb
813d79a115
HackRF input: continuous sample rate setting
2017-04-01 13:08:41 +02:00
f4exb
43d40a4ace
ATV Modulator: PAL-M (525l) effective support
2017-03-12 21:41:01 +01:00
f4exb
4e102ad86d
RTLSDR: restored gain setting
2017-02-21 06:14:47 +01:00
f4exb
038d9c2f41
RTLSDR: reviewed apply settings
2017-02-21 05:35:20 +01:00
f4exb
e7e83b13be
RTLSDR input: make sample rate precision to the sample/s and added 2.167 MS/s for GSM
2017-02-18 12:21:17 +01:00
f4exb
7b9dfb0446
BladeRF support: make sample rate precision to the sample/s and added 4.333 MS/s for GSM
2017-02-18 11:55:19 +01:00
f4exb
f7d7551d01
HackRF support: changed sample rates to sample precision
2017-02-18 11:21:12 +01:00
f4exb
91cb2c39f5
SDRdaemonFEC plugin: UDP connect before bind
2017-02-03 08:20:53 +01:00
f4exb
d0d2a2de0a
HackRF input plugin: documentation
2017-01-11 19:48:45 +01:00
f4exb
201695bb67
HackRF plugins: correct start/stop sequences
2017-01-11 01:21:22 +01:00
f4exb
5b26c7f374
Windows build: added missing bits
2017-01-09 01:31:58 +01:00
f4exb
61e45297df
HackRF plugins: shorten wait time in running loop so that start/stop can react faster (delay set to 200ms instead of 1s)
2017-01-09 00:08:33 +01:00
f4exb
212a8ad2f9
HackRF input plugin: pass thread pointer in the callback instead of using a static variable
2017-01-08 10:44:38 +01:00
f4exb
85ed39c767
HackRF output plugin: compiles
2017-01-08 04:13:20 +01:00
f4exb
1a8d96d874
HackRF input plugin: use actual sample rate and bandwidth values not indexes
2017-01-08 02:48:01 +01:00
f4exb
a02b78d24d
HackRF input: open and close device considering the possible sink buddy
2017-01-08 00:33:11 +01:00
f4exb
250a7f340c
HackRF Output support: created a HackRF device library for Rx/Tx common routines and structures
2017-01-07 11:24:09 +01:00
f4exb
1f4451cf0b
Fixed Windows build for v3.0.0
2017-01-05 18:26:30 +01:00
f4exb
b626cf67e6
Updated main readme and some Tx plugins readme corrections
2017-01-05 04:01:23 +01:00
f4exb
ed769006c2
Added documentation on BladeRF input and output plugins and File Sink plugin
2017-01-04 23:14:28 +01:00
f4exb
cb207e26c7
BladeRF plugins: fixed start/stop and delete sequences
2017-01-03 09:09:51 +01:00
f4exb
f1ac22576c
BladeRF plugins: fixed deadlock due to useless mutex and disable modules on stop
2017-01-03 00:56:18 +01:00
f4exb
17736b3a78
Tx support: BladeRF output plugin: compiles
2017-01-02 10:39:21 +01:00
f4exb
fa0afb6c92
Tx support: implemented final interpolation stage in FileSink plugin
2017-01-02 03:14:46 +01:00
f4exb
2047463dcf
Tx support: common device routines library and handle BladeRF Tx/Rx coordination on Rx side
2016-12-30 16:13:28 +01:00
f4exb
f68f949c19
Tx support: interim state (1)
2016-12-29 12:41:10 +01:00
f4exb
ddb3c6909b
Specify SDRplay RSP1 (only) is supported
2016-12-28 08:22:29 +01:00
f4exb
dc2df804f7
HackRF Tx support: rename more Rx files and cmake items
2016-12-27 03:14:50 +01:00
f4exb
7ef54cc2e0
BladeRF Tx support: rename more Rx files and cmake items
2016-12-27 03:11:57 +01:00
f4exb
da53b153ab
HackRF Tx support: rename Rx files and classes
2016-12-27 02:25:06 +01:00
f4exb
b677fe4d32
BladeRF Tx support: rename Rx files and classes
2016-12-27 02:14:31 +01:00
f4exb
abad9d7299
SDRDaemoFEC plugin: fixed possible segfault
2016-12-11 14:32:10 +01:00
f4exb
1166cbad2e
Debian build: fixed SDRdaemonFEC plugin missing
2016-12-07 17:05:51 +01:00
f4exb
e516672b8f
Debian build: correction
2016-11-29 18:20:11 +01:00
f4exb
c5f1acdcf1
AM Modulator: audio input (mic) basic support
2016-11-29 01:09:06 +01:00
f4exb
7c1b1032c9
AM Modulator: added file input (basic)
2016-11-28 02:17:08 +01:00
f4exb
4398a7426a
Added Debian files for 2.3.0
2016-11-24 00:51:01 +01:00
f4exb
1d28429b3c
SDRplay plugin: removed from Windows build
2016-11-23 02:16:26 +01:00
f4exb
f93d43ee24
SDRplay plugin: note to Windows users
2016-11-22 01:32:17 +01:00
f4exb
2d0ee4bf76
SDRplay plugin: adjust documentation. Corrections and re-organization of the main readme.md file
2016-11-21 18:07:58 +01:00
f4exb
7c8efb046c
Fixed SDRdaemon and SDRdaemonFEC builds so that they are included only if dependent libraries are found. This fixes issue #9
2016-11-21 17:48:30 +01:00
f4exb
60925ea84b
SDRPlay plugin: documentation
2016-11-21 01:21:48 +01:00
f4exb
86d7d90450
SDRPlay plugin: fixed preset load sequence
2016-11-20 11:34:32 +01:00
f4exb
0a618e9f0b
SDRPlay plugin: use mixer buffer gain in AM bands in place of LNA
2016-11-19 23:25:57 +01:00
f4exb
2e85a6a5b1
SDRPlay plugin: change of sample rate needs full stop / start sequence
2016-11-19 04:11:19 +01:00
f4exb
ebdec74822
SDRPlay plugin: use multiples of 32 for the IF dedicated sample rates (1792, 6400 kS/s)
2016-11-19 04:10:48 +01:00
f4exb
9b63cf2670
SDRPlay plugin: move up set sample rate block
2016-11-19 03:12:28 +01:00
f4exb
549aa34360
SDRPlay plugin: removed useless initializations
2016-11-18 04:36:12 +01:00
f4exb
d97697b253
SDRPlay plugin: fixed gains settings in displaySettings method
2016-11-18 03:01:47 +01:00
f4exb
edd6ab751b
SDRPlay plugin: added option to handle global tuner gain or individual lna, mixer and baseband gains
2016-11-18 02:46:35 +01:00
f4exb
d25e7b613e
SDRPlay plugin: gain GUI refactoring
2016-11-17 18:35:17 +01:00
f4exb
2e4ee9b13d
SDRPlay plugin Windows build: adjust libmirisdr paths
2016-11-17 03:46:22 +01:00
f4exb
b997f6ca39
SDRPlay plugin: removed usless auto gain mode
2016-11-17 03:19:05 +01:00
f4exb
d68b34bd88
SDRPlay plugin: change frequency plan
2016-11-17 03:04:52 +01:00
f4exb
e4e7621d54
SDRPlay plugin: new libmirisdr library: support of SDRPlay hardware flavour
2016-11-17 00:45:11 +01:00
f4exb
3da9c5b7cf
SDRPlay plugin: new sample rates to better support non zero IF modes
2016-11-17 00:41:11 +01:00
f4exb
85807ffadb
SDRPlay plugin: now working with open source libmirisdr
2016-11-16 02:38:21 +01:00
f4exb
e4f3915282
SDRPlay plugin: interface replaced by libmirisdr: refactor interim state (1)
2016-11-15 18:58:17 +01:00
f4exb
a9f7c67f7b
SDRPlay plugin: interface replaced by libmirisdr: refactor devices enumeration
2016-11-15 15:57:13 +01:00
f4exb
4dd5f70dcd
SDRPlay plugin: use open source libmirisdr interface instead of the Mirics proprietary one
2016-11-15 14:17:45 +01:00
f4exb
e55fe8c63c
SDRPlay plugin: Windows build
2016-11-14 18:39:06 +01:00
f4exb
5996fc4f48
SDRPlay plugin: properly exit libusb at end of enumeration
2016-11-14 18:06:20 +01:00
f4exb
c1aa21e1fd
SDRPLay plugin: add files for Windows build
2016-11-14 08:23:16 +01:00
f4exb
fcbb7b79ca
SDRPlay support: source plugin interim state (4) Corrected gain settings. SDRPlay interface is not compatible with Qt anyway
2016-11-14 03:23:41 +01:00
f4exb
c9216f2093
SDRPlay support: source plugin interim state (3) MIR stream init fails
2016-11-14 02:24:44 +01:00
f4exb
13d01f48c6
SDRPlay support: source plugin interim state (2) GUI controls
2016-11-14 00:38:43 +01:00
f4exb
863522d9ff
SDRPlay support: source plugin interim state (1) compiles
2016-11-13 02:59:31 +01:00
f4exb
0d4426b8f4
BladeRF plugin: cleanup of useless methods and attributes
2016-11-12 22:57:25 +01:00
f4exb
8d3056f202
Windows build: set SSE options for all source device plugins
2016-11-07 18:40:52 +01:00
f4exb
63d6eea066
Use more precise SIMD flags and detect actual x86_64 SIMD features
2016-11-07 00:42:57 +01:00
f4exb
dbbbfa12ee
Changed USE_SIMD flag to USE_SSE
2016-11-06 02:08:38 +01:00
Edouard Griffiths
a1c73941a2
Debian build: added libbladerf and BladeRF source plugin in the distribution
2016-11-02 15:51:45 +01:00
f4exb
4a001350d3
Tx ph.2: Templatized IntHalfbandFilter and improved coefficients. Changed to order 80 for upsamplers and 48 for downsamplers
2016-10-29 17:01:02 +02:00
f4exb
e7c16e8d85
Device plugins: Removed useless link dependency on QT OpenGL and Multimedia
2016-10-27 08:38:50 +02:00
f4exb
649786c31d
SDRDaemonFEC: set SIMD options. Removed useless dependency on QT OpenGL and Multimedia
2016-10-27 08:33:09 +02:00
Edouard Griffiths
368e9d2595
Debian package build: re-integrated SDRDaemonFEC
2016-10-26 03:48:43 +02:00
Edouard Griffiths
48eb776de9
Debian package build: added Airspy, HackRF, RTLSDR input plugins and removed SDRDaemonFEC
2016-10-26 02:40:00 +02:00
f4exb
12a3974644
Debian package build: corrected HackRF source build
2016-10-26 01:08:39 +02:00
Edouard Griffiths
ecc1647ee6
Implemented Debian package build environment
2016-10-26 00:57:46 +02:00
f4exb
987c23004c
Tx ph.1: Enable center frequecy UI in FileSinkGUI
2016-10-22 21:47:59 +02:00
f4exb
2246271d47
Tx ph.1: Tx support in PluginAPI and PluginManager
2016-10-19 18:07:27 +02:00
f4exb
94e479bb75
Tx ph.1: plugins (1)
2016-10-13 22:23:43 +02:00
f4exb
32595f81b9
RxTx semantic move: renamed DeviceAPI to DeviceSourceAPI
2016-10-11 01:17:55 +02:00
f4exb
211f0570b5
RTLSDR: allow decimation by 32. Bumped to version 2.1.6
2016-10-10 02:19:21 +02:00
f4exb
008ee56252
File Source plugin: skip header when seeking in I/Q recording
2016-10-08 10:02:36 +02:00
f4exb
6f054a51d8
Bumped version to 2.1.5
2016-10-08 06:25:58 +02:00
f4exb
fd8464eac0
FileSource plugin: fixed time length buffer
2016-10-08 06:00:54 +02:00
f4exb
1b086348e6
File Source plugin: fixed reading chunk size not always a multiple of 4 (I/Q sample size) and display of decimal values of sample rate in kS/s
2016-10-07 18:16:17 +02:00
f4exb
f008250ffa
Airspy: dynamic rate support in Windows and more debug messages
2016-10-06 20:59:23 +02:00
f4exb
36aeaa3ea5
RxTx semantic move: renamed SampleFifo to SampleSinkFifo
2016-10-06 19:18:02 +02:00
f4exb
e204efe2b8
RxTx semantic move: renamed DSPDeviceEngine to DSPDeviceSourceEngine
2016-10-03 18:29:05 +02:00
f4exb
7a535cc3b8
RxTx semantic move: renamed SampleSource to DeviceSampleSource
2016-10-02 23:16:40 +02:00
f4exb
1fa80272b5
RxTx semantic move: renamed FileSink to FileRecord
2016-10-02 10:30:58 +02:00
f4exb
1eb3db0291
RTLSDR input: more sample rates (1024 and 2048)
2016-08-12 08:30:43 +02:00
f4exb
fb54b162cd
Updated to v2.1.1 and updated plugin versions
2016-07-31 13:40:41 +02:00
f4exb
f333aef21c
SDRdaemonFEC plugin: stop receive UDP loop when plugin stops
2016-07-29 08:21:27 +02:00
f4exb
59a9bb0a8e
SDRdaemonFEC plugin: clean up commented out code
2016-07-28 23:50:18 +02:00
Edouard Griffiths
904577eae8
SDRdaemonFEC plugin: optimization: store I/Q data blocks directly into final buffer
2016-07-28 17:09:15 +02:00
Edouard Griffiths
860bad12ca
SDRdaemonFEC plugin: change color of text for min total number of blocks display label to be compatible with Windows version
2016-07-28 05:57:59 +02:00
f4exb
b157186b32
SDRdaemonFEC plugin: further improve stats display on GUI and updated readme accordingly
2016-07-28 04:49:33 +02:00
Edouard Griffiths
aa68c907fa
SDRdaemonFEC plugin: improve stats on GUI
2016-07-27 18:49:17 +02:00
Edouard Griffiths
286ea81470
SDRdaemonFEC plugin: Windows build
2016-07-27 18:39:59 +02:00
f4exb
72fe72a529
SDRdaemonFEC plugin: cleanup and readme updates
2016-07-26 23:36:59 +02:00
f4exb
8b82547b86
SDRdaemonFEC plugin: make status button background darker when blocks are lost
2016-07-25 08:40:10 +02:00
f4exb
1d2e0986e5
RTLSDR plugin: align DC and IQ correction buttons with other plugins
2016-07-25 04:46:58 +02:00
f4exb
b84fde2831
SDRdaemonFEC plugin: updated online documentation
2016-07-24 20:01:10 +02:00
f4exb
9007d505ee
SDRdaemonFEC plugin: use meta data CRC32 and promote to version 2.1.0 again
2016-07-24 19:50:51 +02:00
f4exb
66e829bbf9
SDRdaemonFEC plugin: demote to version 2.0.2
2016-07-24 14:38:25 +02:00
f4exb
2554851a0b
SDRdaemonFEC plugin: do not recover meta because FEC is unreliable
2016-07-24 14:27:15 +02:00
f4exb
5e14ac9173
SDRdaemonFEC plugin: take buffering into account for timestamp calculation
2016-07-24 12:53:39 +02:00
f4exb
bbccea9432
SDRdaemonFEC plugin: GUI enhancements
2016-07-24 11:09:11 +02:00
f4exb
fac8465575
SDRdaemonFEC plugin: first working FEC version with cm256cc library
2016-07-23 23:14:22 +02:00
f4exb
c96c52eb5e
SDRdaemonFEC plugin: failed connection debug messge
2016-07-23 20:13:27 +02:00
f4exb
bda1d8997b
SDRdaemonFEC plugin: migrate to new cm256cc library
2016-07-23 19:59:42 +02:00
f4exb
a0729ce6f5
SDRdaemonFEC: debug FEC (1)
2016-07-20 08:54:31 +02:00
f4exb
29240f66dd
SDRdaemonFEC plugin: fixed GUI
2016-07-18 00:39:35 +02:00
f4exb
85d9a101bf
SDRdaemonFEC plugin: fixed CM256 library init and simplify code
2016-07-17 23:33:50 +02:00
f4exb
1b8199df89
SDRdaemonFEC plugin: check frame and block sequence
2016-07-15 19:44:02 +02:00
f4exb
c8785c94bb
SDRdaemonFEC support. auto R/W correction
2016-07-13 03:31:19 +02:00
f4exb
95804345d5
SDRdaemonFEC support. auto R/W correction (1)
2016-07-12 08:52:38 +02:00
f4exb
6540979108
SDRdaemonFEC support. allow for smaller datagrams than the UDP block size
2016-07-12 04:44:44 +02:00
f4exb
83e34fde20
SDRdaemonFEC support. compatibility with zero FEC
2016-07-07 03:49:47 +02:00
f4exb
e252123567
SDRdaemonFEC support. removed special structure for block zero
2016-07-07 02:54:23 +02:00
f4exb
ddb65d2e70
SDRdaemonFEC support. removed useless data and method
2016-07-07 02:43:09 +02:00
f4exb
110d7cae46
SDRdaemonFEC support. removed output meta
2016-07-07 02:38:30 +02:00
f4exb
5fc9bd07f4
SDRdaemonFEC support. new simplified write method
2016-07-07 02:36:44 +02:00
f4exb
57231cdb32
SDRdaemonFEC support. removed output meta
2016-07-07 02:25:32 +02:00
f4exb
c7751062c3
SDRdaemonFEC support: debug (8). fixed CM256 descriptors addressing of recovery blocks. Debug message when frames are incomplete.
2016-07-06 02:54:01 +02:00
f4exb
dddf872d56
SDRdaemonFEC support. Use new simplified version
2016-07-06 00:43:38 +02:00
f4exb
8a22c0b468
Merge branch 'master' into dev. Build for Mac OS.
2016-07-05 20:02:51 +02:00
f4exb
f437666749
SDRdaemonFEC support. debug (8). use litterals
2016-07-05 19:59:18 +02:00
Ziga S
08602c661b
Updated CMake files for QTEditor cmake style.
...
AudioOutput had previously stalled, mutex temporary removed(Q&D workaround, need for study OSX Audio Concurency).
Removed some part of code in DemodBFM for OSX compilations.
Code runs and was tested with HackRF.
Note: There is need have investigate two potencial problems(DemodBFM bug and AudioOutput deadlocking?).
2016-06-29 10:10:24 +02:00
f4exb
aea9bf866e
SDRdaemonFEC support: debug (7). Corrected CM256 parameters specification fixing decoding
2016-06-23 01:31:40 +02:00
f4exb
278f085dbc
SDRdaemonFEC support: debug (6). Corrected meta data processing
2016-06-23 00:58:07 +02:00
f4exb
3e388987c8
SDRdaemonFEC support: debug (5). Corrected statistics display
2016-06-23 00:57:47 +02:00
f4exb
cded6772ae
SDRdaemonFEC support: debug (4). Corrected buffer gauge display
2016-06-22 01:10:58 +02:00
f4exb
a628357f76
SDRdaemonFEC support: debug (3). Fixed frames buffer length calculation and use more slots
2016-06-21 21:49:27 +02:00
f4exb
96bec6cac3
SDRdaemonFEC support: debug (2). Fixed output meta data cature
2016-06-21 08:30:32 +02:00
f4exb
46e85fa643
SDRdaemonFEC support: debug (1)
2016-06-20 09:07:37 +02:00
f4exb
b73330c663
SDRdaemonFEC support: correctly implement in plugin manager
2016-06-20 01:58:46 +02:00
f4exb
0812ab0d13
SDRdaemonFEC support: full compile
2016-06-20 01:32:32 +02:00
f4exb
eb3fedecda
SDRdaemonFEC support: interim state (2). Compile UI.
2016-06-20 01:18:21 +02:00
f4exb
e418e68bd9
SDRdaemonFEC support: interim state (1). Compile except UI. Bumped version to 2.1.0 where necessary
2016-06-20 00:45:24 +02:00
f4exb
4386e0fbab
SDRdaemonFEC support: added plugin as copy of SDRdaemon plugin
2016-06-19 09:56:49 +02:00
f4exb
b97a2ecffb
Multi device support: Windows support
2016-05-25 02:33:50 +02:00
f4exb
7863a3cb69
Multi device support: remainder source plugins: removed useless dependencies on plugin API
2016-05-17 19:26:23 +02:00
f4exb
197feb1c9d
Multi device support: SDRDaemon plugin removed useless dependencies on plugin API
2016-05-17 19:08:04 +02:00
f4exb
35df869115
Multi device support: BladeRF plugin removed useless dependencies on plugin API
2016-05-17 17:57:48 +02:00
f4exb
1974b375ee
Multi device support: RTL-SDR plugin removed useless dependencies on plugin API
2016-05-17 17:53:22 +02:00
f4exb
08a6554c4e
Multi device support: set version to 2.0.0 in all plugins
2016-05-17 15:29:28 +02:00
f4exb
5a8d05bfaf
Multi device support: simplify source input setting
2016-05-17 03:41:01 +02:00
f4exb
500e809cba
Multi device support: moved setInputGUI method from plugin API and manager classes to device API class
2016-05-16 16:02:55 +02:00
f4exb
7412ee0d54
Multi device support: migrate device specific stuff outside plugin classes completed for source plugins
2016-05-16 02:14:36 +02:00
f4exb
be918a217b
Multi device support: migrate device specific stuff outside plugin classes
2016-05-16 01:12:37 +02:00
f4exb
602bfc988a
Removed v4l-rtl and v4l-msi sample source plugin sources
2016-05-15 09:40:11 +02:00
f4exb
1707aa8e27
Removed gnuradio and osmosdr plugin sources
2016-05-15 09:26:31 +02:00
f4exb
4027b00675
Multi device support: GUI enhmcements
2016-05-15 04:38:37 +02:00
f4exb
3c0e66c90e
Multi device support: GUIs enhancements
2016-05-14 03:15:03 +02:00
f4exb
7053d3775c
Multi device support: completely removed direct access to DSP device engine from DSP engine
2016-05-13 00:50:29 +02:00
f4exb
2b036e2212
Multi device support: completely removed dependency on DSPEngine from source plugins
2016-05-13 00:03:58 +02:00
f4exb
f4c03bcab1
Multi device support: completely removed DSPEngine dependency on DSPDeviceEngine message queues
2016-05-12 23:45:27 +02:00
f4exb
7707858d57
Multi device support: pass plugin API to devices input handlers to give access to DSP device engine methods
2016-05-12 23:35:30 +02:00
f4exb
7159004bbe
Multi device support: Aligned Funcube Pro+ plugin
2016-05-12 18:02:55 +02:00
f4exb
25197faa7a
Multi device support: Aligned Funcube Pro plugin
2016-05-12 17:40:26 +02:00
f4exb
ea1f2208f7
Multi device support: Aligned HackRF plugin
2016-05-12 17:18:08 +02:00
f4exb
deee1ada34
Multi device support: Aligned Airspy plugin
2016-05-12 16:47:10 +02:00
f4exb
8885f9bcdd
Multi device support: Aligned SDRDaemon plugin
2016-05-12 12:48:08 +02:00
f4exb
b399cc0dd4
Multi device support: Changed aligned FileSource
2016-05-12 12:29:12 +02:00
f4exb
cd9532a5e2
Multi device support: Changed aspect of record button
2016-05-12 12:04:59 +02:00
f4exb
e750acc7da
Multi device support: Apply previous changes to RTL-SDR.
2016-05-12 11:10:10 +02:00
f4exb
e25c465b82
Multi device support: removed as much as possible (now) DSPDeviceEngine dependencies in MainWindow to source plugin GUIs. This includes file sink handling. Applies to BladeRF only.
2016-05-12 10:31:57 +02:00
f4exb
ecd05096ad
Multi device support: moved DSPDeviceEngine start/stop actions and status from main window to each source plugin GUI
2016-05-11 23:35:16 +02:00
f4exb
7992f3f428
Multi device support: add start/stop buttons to all source plugins GUIs
2016-05-11 20:02:45 +02:00
f4exb
33b7177445
RTL-SDR source plugin: added 256k and 1600k sample rates
2016-05-03 02:14:41 +02:00
f4exb
90a5b75e91
DSD demod: DMR integration debug (2). Added eye diagram capability by delaying Q signal by 20 samples (2400 baud)
2016-04-12 03:32:42 +02:00
f4exb
58656fe65c
RTL-SDR plugin: New 2000 kS/s rate
2016-03-31 19:49:32 +02:00
f4exb
007aaaf749
BladeRF plugin: changed sample rate and bandwidth unit displays. New 2000 kS/s rate
2016-03-31 19:48:06 +02:00
f4exb
ce20f21b08
BladeRF input plugin: GUI cosmetic changes
2016-03-29 17:31:44 +02:00
f4exb
574141be6c
Airspy input plugin: GUI cosmetic changes
2016-03-29 16:53:15 +02:00
f4exb
d59c9e5a95
HackRF input plugin: GUI cosmetic changes
2016-03-29 16:39:05 +02:00
f4exb
39d5ecf6de
RTL-SDR input plugin: GUI cosmetic changes
2016-03-29 16:22:24 +02:00
f4exb
b70fa3f191
Fixed preset import
2016-03-29 14:51:52 +02:00
f4exb
85778dbcc1
CMakeLists.txt files cleanup
2016-03-29 09:36:19 +02:00
Edouard Griffiths
4b95c1cbc0
Windows build: added .pro file for FCD Pro+ but it does not link so not included in main .pro
2016-03-29 03:53:54 +02:00
f4exb
989feb9108
FCD Pro+ plugin: non ALSA classes to handle FCD audio for Windows build
2016-03-29 03:17:59 +02:00
f4exb
b4178db004
SDRdaemon plugin: corrections in the readme
2016-03-28 02:48:33 +02:00
Edouard Griffiths
1f758bc5f7
Windows build: re-implement nanomsg and sdrdaemon plugin for 64 bit version only. Created a batch installation script for Win64
2016-03-28 02:34:14 +02:00
f4exb
8acfaa0458
SDRdaemon plugin: control from the plugin documentation update
2016-03-27 22:16:23 +02:00
Edouard Griffiths
27b6aab5f7
Windows build: added possibility to build with MinGW64 (experimental, does not work)
2016-03-27 18:56:33 +02:00
Edouard Griffiths
641e6b529f
Windows build: removed nanomsg and sdrdaemon input plugin from the build
2016-03-27 12:12:57 +02:00
f4exb
17db3e03b6
SDRdaemon plugin: send configuration done
2016-03-27 04:33:12 +02:00
f4exb
0822773fbb
SDRdaemon plugin: send configuration phase 1
2016-03-26 21:40:54 +01:00
Edouard Griffiths
57149d0689
Windows build: added BladeRF input plugin
2016-03-23 16:59:53 +01:00
f4exb
8254a4d07f
SDRdaemon plugin: readme documentation
2016-03-20 18:12:37 +01:00
f4exb
a99fdd1f26
SDRdaemon plugin: Added tooltip for main buffer length in seconds display
2016-03-20 14:43:01 +01:00
f4exb
3bebd05411
SDRdaemon plugin: Added buffer length in seconds to the GUI
2016-03-20 14:40:40 +01:00
f4exb
b7a4c468fc
SDRdaemon plugin: Ensure a minimal size of the main buffer depending on frame size so that auto follow ups work fine
2016-03-20 12:59:55 +01:00
f4exb
0ffc02102e
SDRdaemon plugin: better calculation of write - read pointers delta. Better amortization of buffer R/W compensation with an alpha factor of 0.25
2016-03-20 02:49:25 +01:00
Edouard Griffiths
bfdcac70d0
SDRdaemon plugin: set the r/w buffer maximum correction limit to +/- 20 ms
2016-03-19 18:54:09 +01:00
f4exb
b14ae1e7c1
SDRdaemon: GUI fix. Limit r/w balance correction
2016-03-19 08:54:31 +01:00
f4exb
7077f6a780
SDRdaemon plugin: apply buffer r/w correction at all ticks. Updated readme with warnings for Windows
2016-03-19 06:14:06 +01:00
f4exb
0ba624dc37
SDRdaemon: ensure there are enough reads to calculate auto r/w unbalance correction
2016-03-19 05:15:34 +01:00
f4exb
a009d352be
SDRdaemon: fix buffer r/w unbalance figure display when negative
2016-03-19 05:10:02 +01:00
f4exb
5845eaec92
SDRdaemon plugin: UI: enhance buffer r/w unbalance details display
2016-03-19 04:09:55 +01:00
f4exb
1c0ef544d3
SDRdaemon plugin: fix auto read/write balance correction
2016-03-19 03:49:38 +01:00
Edouard Griffiths
8b22d2cbbc
SDRdaemon plugin: fixed deserialization of auto R/W balance flag
2016-03-18 18:37:32 +01:00
Edouard Griffiths
78c7a3ac45
SDRdaemon plugin: removed duplicate lines in .ui file
2016-03-18 18:04:03 +01:00
Edouard Griffiths
c1c64b7051
SDRdaemon plugin: implemented reset buffer indexes and auto balance buffer reads/writes
2016-03-18 14:03:34 +01:00
Edouard Griffiths
f7e3db53fe
SDRdaemon plugin: fixed buffer gauge calculation
2016-03-18 10:52:35 +01:00
f4exb
b97ab1bd9d
SDRdaemon plugin: corrected buffer gauge value calculation
2016-03-18 08:45:01 +01:00
Edouard Griffiths
22c3078c3a
SDRdaemon plugin: added gauges for main buffer read vs writes
2016-03-17 15:41:48 +01:00
Edouard Griffiths
335ecea84a
SDRdaemon: use own timer for Windows build with optimized interval at 50ms
2016-03-17 09:17:02 +01:00
Edouard Griffiths
12ff4c2334
SDRdaemon: use own timer for Windows build with optimized interval at 60ms
2016-03-17 01:56:09 +01:00
f4exb
55f389cfb0
SDRdaemon plugin: use internal (slower) timer for Windows release only. Fixed compile error
2016-03-16 22:40:54 +01:00
Edouard Griffiths
be13c80e73
SDRdaemon plugin: use internal (slower) timer for Windows release only
2016-03-16 18:46:16 +01:00
Edouard Griffiths
8a44f5c089
SDRdaemon plugin: get throttle interval from the timer. Removed useless chunk size attrubute
2016-03-16 18:26:44 +01:00
f4exb
87a53f03a2
SDRdaemon plugin: attempt to fix the skew rate calculation
2016-03-16 09:10:29 +01:00
f4exb
d5f65a7e39
SDRdaemon plugin: use a fixed time bound raw buffer of 8 seconds
2016-03-16 05:51:22 +01:00
f4exb
199b04de90
SDRdaemon plugin: ensure a mnimum size of 16MB for the raw buffer
2016-03-15 22:20:44 +01:00
f4exb
42e139e63e
SDRdaemon plugin: switchable auto skwew rate following
2016-03-15 21:22:12 +01:00
Edouard Griffiths
026016c0d5
SDRdaemon: new auto skew rate compensation #1
2016-03-15 18:56:15 +01:00
Edouard Griffiths
f9c13dace9
SDRdaemon plugin: auto adaptive throttling
2016-03-15 18:06:02 +01:00
f4exb
35db910ba9
SDRdaemon plugin: auto adaptive throttling preparation
2016-03-15 06:13:52 +01:00
f4exb
47a3f534dd
File Source input: correct setBuffer paramter type
2016-03-14 08:21:06 +01:00
Edouard Griffiths
1393a93070
File Source plugin: auto adaptative throttling
2016-03-14 01:43:21 +01:00
f4exb
1a9af41ac3
Windows build: added Airspy plugin
2016-03-13 01:22:00 +01:00
f4exb
1eeb308d47
File Source plugin: removed redundant navigation time display
2016-03-13 00:46:37 +01:00
f4exb
108e743da8
Windows build: added Hackrf plugin
2016-03-13 00:34:46 +01:00
f4exb
1ba3324844
HackRF plugin: initialize hackrf library before trying to enumerate
2016-03-12 23:17:51 +01:00
f4exb
137193ff3b
Windows build: added RTL-SDR input plugin with dependency to binary libusb for MinGW32
2016-03-12 03:17:30 +01:00
f4exb
2e211365eb
SDRdaemon plugin: cosmeticc changes in UI
2016-03-11 08:36:05 +01:00
f4exb
763594c2f0
SDRdaemon plugin: button to make auto follow stream sample rate optional
2016-03-11 05:25:25 +01:00
f4exb
1e34641138
Corrected date stamps calculation for Windows (MinGW) compatibility
2016-03-11 03:30:13 +01:00
Edouard Griffiths
90d6cd89e9
Windows build: added SDRdaemon input plugin in the build
2016-03-09 18:42:32 +01:00
Edouard Griffiths
782bb8ae40
Windows build: apply modifications
2016-03-09 06:39:19 +01:00
Edouard Griffiths
7fa519e39f
Windows build: added AM demod plugin
2016-03-09 00:20:49 +01:00
Edouard Griffiths
f81820fa58
Have Windows plugins (.dll) searched by plugin manager loader. Added .pro file for filesource input plugin
2016-03-08 13:58:53 +01:00
f4exb
837715fc0f
HackRF plugin: added two sampling rates above 4.8 MS/s
2016-03-07 01:51:42 +01:00
f4exb
5ecf7ea00c
File source plugin: added seek bar to move the current pointer in the file
2016-02-25 14:07:39 +01:00
f4exb
a8fc503366
File source plugin: since it always plays in a loop for now set the play loop button and disable it
2016-02-25 11:06:23 +01:00
f4exb
f153325ec0
File source plugin: added passive navigation slider
2016-02-25 11:02:39 +01:00
f4exb
d5ddd5c9a1
File source plugin: added total record time in UI
2016-02-25 02:30:50 +01:00
f4exb
58d82139ab
Filesource plugin: enhanced readibility of timestamp
2016-02-25 01:44:48 +01:00
f4exb
f2bf04fa08
SDRdaemon plugin: enable set button only when address or port fields are edited
2016-02-25 01:37:47 +01:00
f4exb
6fd9e4f5bc
cmake: added install and uninstall targets
2016-02-24 11:51:36 +01:00
f4exb
5ab1f76538
SDRdaemon plugin: fixed UDP setting in UI
2016-02-23 23:16:05 +01:00
f4exb
09e724bbdb
SDRdaemon plugin: fixed start not actually starting
2016-02-23 22:24:25 +01:00
f4exb
591ffd2f0e
SDRdaemon plugin: display stream rate with two decimals in UI
2016-02-23 21:22:27 +01:00
f4exb
153b1c017c
SDRdaemon plugin: report LZ4 statistics
2016-02-23 19:27:47 +01:00
f4exb
e5f2a49835
SDRdaemon plugin: report LZ4 compression ratio
2016-02-23 18:29:08 +01:00
f4exb
23750b10f6
SDRdaemon plugin: report LZ4 compression status
2016-02-23 18:19:35 +01:00
f4exb
16c3e3e72f
SDRdaemon plugin: report frame soze in UI. Reorganized UI
2016-02-23 18:09:20 +01:00
f4exb
6b368f10b6
SDRdaemon plugin: report stream locked in UI
2016-02-23 14:57:40 +01:00
f4exb
586abc6508
SDRdaemon plugin: added status bar in the UI
2016-02-23 11:09:45 +01:00
f4exb
d835662932
SDRdaemon plugin: corrected plugin name
2016-02-23 10:38:08 +01:00
f4exb
248d5ecdba
Fixed sample rate recalculation
2016-02-23 04:50:15 +01:00
f4exb
942a7ca803
SDRdaemon plugin: fixed LZ4 writes and uncompressed writes
2016-02-23 01:29:03 +01:00
f4exb
501b14d1e7
SDRdaemon plugin: widen auto skew rate compensation to +/-20%
2016-02-22 15:17:44 +01:00
f4exb
aa709b9d5c
SDRdaemon plugin: report stream skew data on the GUI
2016-02-22 15:03:16 +01:00
f4exb
bf78fa016e
SDRdaemon plugin: auto skew correction fixed
2016-02-22 14:18:41 +01:00
f4exb
898178bd12
SDRdaemon plugin: auto skew correction #1
2016-02-22 12:10:13 +01:00
f4exb
2d018f7968
SDRdaemon plugin: reactivate address setting in GUI. Put in place a stram locked status.
2016-02-21 11:01:43 +01:00
f4exb
48d858ce5d
SDRdaemon plugin: fixes
2016-02-20 23:02:34 +01:00
f4exb
952a32172d
SDRdaemon plugin: update settings after deserialization
2016-02-20 10:10:11 +01:00
f4exb
b59c28d4c7
SDRdaemon plugin: code cleanup
2016-02-20 03:48:04 +01:00
f4exb
33a196e4aa
SDRdaemon plugin: fixed buffer issues
2016-02-20 03:41:20 +01:00
f4exb
6b16222792
SDRdaemon plugin: works with bugs
2016-02-19 08:48:14 +01:00
f4exb
d267d56de5
Sdrdaemon: fixed SDRdaemon buffer read pointer update
2016-02-18 22:26:47 +01:00
f4exb
07bfcb04dc
SDRdaemo: serialize auto corrections
2016-02-18 01:24:58 +01:00
f4exb
0b0d57724c
SDRdaemon plugin: corrected main spectrum frequency display
2016-02-18 00:33:04 +01:00
f4exb
f04b6c4dc1
SDRdaemon plugin: implement DC offset and IQ imbalance corrections
2016-02-17 23:47:03 +01:00
f4exb
05a4a7cb4e
SDRdaemon: first working version
2016-02-17 19:42:26 +01:00
f4exb
8d986368bd
SDRdaemon: fixed SDRdaemonBuffer returned value for read meta
2016-02-17 08:40:10 +01:00
f4exb
8dc05cf578
SDRdaemon: UDP handler receives data
2016-02-17 02:22:05 +01:00
f4exb
42b52a2d2c
SDRdaemon debug. Frequency now in kHz in the meta data
2016-02-14 20:01:46 +01:00
f4exb
4dfc4701e5
Removed useless method in filesource plugin
2016-02-10 22:52:14 +01:00
f4exb
31ef841a99
SDRdaemon plugin. Debug core dump
2016-02-07 20:02:13 +01:00
f4exb
9213cee156
SDRdaemon plugin: change buffer allocation when sample rate changes
2016-02-02 08:21:16 +01:00
f4exb
1602525e0c
SDRdaemon plugin: removed references to file input
2016-02-01 08:24:14 +01:00
f4exb
becf359db9
SDRdaemon plugin: handle data reads
2016-01-29 08:17:34 +01:00
f4exb
e9058a1c94
SDRdaemon plugin: handle data writes
2016-01-28 04:54:16 +01:00
f4exb
ca7d8de81e
SDRdaemon plugin: added counters for data received from UDP
2016-01-28 03:30:36 +01:00
f4exb
13d698a940
SDRdaemon: updated write data to raw buffer methods
2016-01-27 08:40:54 +01:00
f4exb
2fe57dabae
SDRdaemon: revised buffers allocation
2016-01-27 08:24:00 +01:00
f4exb
34138dc1c4
Removed methods taken from gd-sdmnsource
2016-01-26 23:48:52 +01:00
f4exb
458767aa45
SDRdaemon plugin: changed sample buffer to raw format (uint8_t)
2016-01-26 08:27:45 +01:00
f4exb
fd8c9c41eb
SDRdaemon plugin: added samples buffer to the SDRdaemon buffer class
2016-01-25 08:40:44 +01:00
f4exb
7a6882829a
SDRdaemon plugin: new classes
2016-01-24 23:38:55 +01:00
f4exb
1850452601
Add liblz4 dependency for sdrdaemon plugin
2016-01-24 19:26:42 +01:00
f4exb
e4f97e1a1b
Copied filesource plugin folder to new sdrdaemon
2016-01-24 19:21:21 +01:00
Edouard Griffiths
53027c42d2
Added missing tooltips in main GUIs
2016-01-12 13:38:44 +01:00
Edouard Griffiths
c3ad875b1d
Added missing tooltips in sample source GUIs
2016-01-12 13:31:23 +01:00
F4EXB
3c3d4e3b41
Font face and size normalization: added missing input interface GUIs
2016-01-12 08:40:40 +01:00
f4exb
709cee9fc3
Added frequency units to BaldeRF GUI Rx center frequency dial
2016-01-12 04:43:41 +01:00
f4exb
80d0fda710
Normalize BladeRF GUI
2016-01-12 04:15:55 +01:00
f4exb
144462d57b
RTL-SDR input: fixed sample rate slider range and add one more sample rate
2015-12-27 04:04:24 +01:00
f4exb
82fdf1d499
Fixed RTL sample rates
2015-12-25 17:55:36 +01:00
f4exb
2a194ca44e
Airspy: implemented LNA and Mixer AGC controls
2015-12-09 01:49:46 +01:00
f4exb
8bf08500bf
Removed commented out code
2015-10-21 21:20:05 +02:00
f4exb
35440d60f6
Attempt at fixing some race conditions #1
2015-10-21 02:32:21 +02:00
Edouard Griffiths
687783ce5b
Fixed HackRF list of devices not freed before exit
2015-10-19 03:56:56 +02:00
f4exb
9b0d92b35b
One more sample rate for BladeRF
2015-10-06 05:37:17 +02:00
f4exb
453e53541b
New sample rates for BladeRF
2015-10-05 08:24:09 +02:00
f4exb
1ac49ce8ce
Fixed setting of source of same kind with different sequence number
2015-10-03 23:59:02 +02:00
f4exb
f9913c7875
debug message
2015-10-03 22:31:46 +02:00
f4exb
eb08ef55b3
Fixed Fc position adjustment for Airspy and HackRF
2015-10-01 06:34:08 +02:00
f4exb
dc81e2dd9c
RTLSDR: implemented Fc position adjustment
2015-10-01 06:30:50 +02:00
f4exb
2ceacfa107
Normalize BladeRF plugin identifier
2015-10-01 05:47:24 +02:00
f4exb
6d3f975124
Normalize device name displays
2015-10-01 05:44:33 +02:00
f4exb
df2077caa7
RTLSDR: DC offset and IQ imbalance buttons. Standard device ID in plugin
2015-10-01 05:05:46 +02:00
f4exb
3cc73fbf61
RTL-SDR: replaced serializer by setting class
2015-10-01 04:39:00 +02:00
f4exb
3540efc696
FCD Pro+: normalized plugin device Id definition
2015-10-01 04:23:22 +02:00
f4exb
6616f92a36
FCD Pro+: implemented DC block and IQ imbalance buttons
2015-10-01 04:13:04 +02:00
f4exb
a25fa4ef97
FCD Pro+: replaced serializer with settings
2015-10-01 03:37:53 +02:00
f4exb
b31033c0a2
Added DC block and IQ correction buttons to BladeRF
2015-10-01 03:18:20 +02:00
f4exb
d2a41a5b9d
Removed deprecated BladeRF serializer
2015-10-01 02:49:12 +02:00
f4exb
4386f5e4a5
Added DC offset and IQ imbalance buttons to Airspy GUI
2015-10-01 02:46:41 +02:00
Edouard Griffiths
76cb615a18
New preset design. Implement for BladeRF interim #3
2015-09-30 19:03:50 +02:00
Edouard Griffiths
9987c7db4f
New preset design. Implement for BladeRF interim #2
2015-09-30 18:56:00 +02:00
Edouard Griffiths
e2dd03ff48
New preset design. Implement for BladeRF interim #1
2015-09-30 18:55:45 +02:00
Edouard Griffiths
2309c89859
New preset design: fix missing bits in HackRF and Filesource plugin classes
2015-09-30 18:06:50 +02:00
Edouard Griffiths
49763934ea
Airspy serialization redesign final
2015-09-30 13:53:09 +02:00
Edouard Griffiths
fbda81163a
Removed now useless Airspy serializer class
2015-09-30 13:49:38 +02:00
Edouard Griffiths
e3a56e04d6
New preset design (single). Applied to Airspy. Missing DC block and IQ imbalance GUI
2015-09-30 13:34:49 +02:00
Edouard Griffiths
19a7170188
New preset design (single). Applied to Airspy. Interim state #2
2015-09-30 13:31:32 +02:00
Edouard Griffiths
4657790fd6
New preset design (single). Applied to Airspy. Interim state #1
2015-09-30 13:23:20 +02:00
Edouard Griffiths
51e4792d77
Removed stray include of libbladeRF.h
2015-09-30 11:09:46 +02:00
f4exb
cfcd08f6c1
Fixed source plugins virtual methods. All sample source plugins
2015-09-30 09:01:29 +02:00
f4exb
3ced80e198
Fixed source plugins virtual methods
2015-09-30 08:55:58 +02:00
f4exb
a1efdcc8dc
New preset design: changed device registration
2015-09-30 06:57:40 +02:00
f4exb
f50e717c20
New preset design (single) applied to FCD Pro
2015-09-30 05:38:58 +02:00
f4exb
ded446c43a
New preset design (single). Applied to HackRF
2015-09-30 04:39:09 +02:00
f4exb
2d9c0bcfd2
Review presets #1 . Apply to HackRF
2015-09-30 03:46:46 +02:00
f4exb
921b511f96
Presets by source: set center frequency from preset center frequency
2015-09-29 03:35:14 +02:00
f4exb
aa66d26059
Changed HackRF sample rate list
2015-09-27 22:44:47 +02:00
f4exb
f331a3986e
Fixed LO PPM calculation for the HackRF and Airspy
2015-09-27 18:32:19 +02:00
f4exb
fd78dda566
Fixed stop acquisition not working when sample rate is too high
2015-09-27 15:47:51 +02:00
f4exb
8ca8547148
removed useless handle source messages mechanism in HackRF GUI
2015-09-27 12:55:44 +02:00
f4exb
525a3f0024
post sample rate changes directly on DSP input message queue. Removed sample source output queue entirely as it was not reliable under stress
2015-09-27 12:50:38 +02:00
f4exb
7cc0d95054
Added support for HackRF
2015-09-27 11:27:02 +02:00
f4exb
2b092bf660
Added support for HackRF. Interim state #3
2015-09-27 07:37:15 +02:00
f4exb
3be1a1a3e2
Added support for HackRF. Interim state #2
2015-09-25 08:30:22 +02:00
f4exb
2932cbfdc3
Added support for HackRF. Interim state #1
2015-09-24 02:50:24 +02:00
f4exb
4246fb6381
NFM demod: revised AF squelch completely
2015-09-13 11:56:14 +02:00
f4exb
c6b2730456
Fixed Airspy Mixer and VGA gains settings
2015-09-12 09:57:10 +02:00
f4exb
efda927b93
Support for Airspy: corrected open device by sequence number
2015-09-11 09:12:56 +02:00
f4exb
0b7a8c8cdb
Support for Airspy: allow decimation by 64
2015-09-11 08:43:59 +02:00
f4exb
6e24ed6c28
Support for Airspy: make LO ppm correction effective
2015-09-11 08:23:04 +02:00
f4exb
efa1a0c58a
Support for Airspy: first working version
2015-09-11 03:02:02 +02:00
f4exb
7e88cfcd48
Support for Airspy: make pointer to thread private. Debug messages on enumeration
2015-09-10 08:12:49 +02:00
f4exb
61e6e3e2cc
Support for Airspy: compiles
2015-09-10 05:53:37 +02:00
f4exb
1e37479130
Support for Airspy: interim state #1
2015-09-09 09:13:24 +02:00
f4exb
178704be1c
Fixed FCD Pro LNA gain setting
2015-09-08 08:28:43 +02:00
f4exb
f23a115c23
Deep redesign: Better support for FCD dongles #12 : finalized support of FCD Pro
2015-09-08 01:27:18 +02:00
f4exb
1f4894364d
Deep redesign: Better support for FCD dongles #11 : Proper support of FCD Pro
2015-09-07 05:35:01 +02:00
f4exb
cf68879962
Support of FCD Pro dongles part #2 : basic gui, input and serialization
2015-09-07 04:55:55 +02:00
f4exb
e784cf7f7f
Deep redesign: Better support for FCD dongles #10 : Proper support of FCD Pro+
2015-09-06 01:34:20 +02:00
f4exb
7739db8fbe
Proper support of FCD Pro+ interim phase #1
2015-09-05 11:46:56 +02:00
f4exb
bf330c00fc
Moved FCD HID commands in their respective includes for Pro and Pro+
2015-09-05 06:24:02 +02:00
f4exb
208d3deb6e
Deep redesign: Better support for FCD dongles #9 : use fcd_traits template instead of hardcoded values
2015-09-05 05:50:29 +02:00
f4exb
4dfe89c5b1
Deep redesign: Better support for FCD dongles #8 : Use 8k buffer with FCD Pro+ as originally in FCD plugin
2015-09-04 05:15:23 +02:00
f4exb
0345969124
Deep redesign: Better support for FCD dongles #8 : removed old FCD plugin
2015-09-04 05:03:45 +02:00
f4exb
a2a9c45210
Deep redesign: Better support for FCD dongles #7 : Activate original Pro plugin with proper enumeration of Pro or Pro+ matching devices
2015-09-04 05:02:45 +02:00
f4exb
5453d63431
Deep redesign: Better support for FCD dongles #6 : have two distinct plugins for Pro and Pro+. Only Pro+ is active at the moment
2015-09-04 04:10:38 +02:00
f4exb
410b6d15c0
Removed dependency on libbladeRF for filesource plugin
2015-09-04 02:25:45 +02:00
f4exb
919a1326f4
Deep redesign: Better support for FCD dongles #5 : hardcode values since traits do not work with Qt framework
2015-09-04 02:24:02 +02:00
f4exb
5f84e56cf5
Deep redesign: Better support for FCD dongles #4 : Fixed get center frequency from the plugin GUI
2015-09-03 08:50:07 +02:00
f4exb
01feb31a9e
Deep redesign: Better support for FCD dongles #3 : Fixed frequency change at startup (apply settings with force). Aligned startup code with BladeRF's one (startWork method in thread)
2015-09-03 08:39:57 +02:00
f4exb
a909c4c40c
Deep redesign: Better support for FCD dongles #1
2015-09-03 03:57:54 +02:00
f4exb
4fba8144dc
Deep redesign: move to SDRangel #8 . Updated plugin about text
2015-09-02 01:16:40 +02:00
f4exb
a559035e22
Deep redesign: fixed decimation bit shifts and halfband filter decimation bit loss
2015-09-02 00:12:00 +02:00
f4exb
7f35fdeb89
Deep redesign: reverted message deqeuing changes
2015-08-30 23:22:18 +02:00
f4exb
3aa4dc710b
Deep redesign: move to SDRangel #6 . New readme and cleanup
2015-08-30 21:46:27 +02:00
f4exb
4fdfcfe386
Deep redesign: fixed File input queuing of stream timing messages
2015-08-30 13:04:26 +02:00
f4exb
3e5a556cf7
Deep redesign: fixed BladeRF plugin segfault when no device is connected
2015-08-30 13:03:27 +02:00
f4exb
cebedf1460
Deep redesign: corrections after Valgrind memcheck
2015-08-29 03:09:44 +02:00
f4exb
5101a08632
Deep redesign: fixed FCD serialization. Pretty print utilities. Reverted optimization of source serializer
2015-08-28 11:12:31 +02:00
f4exb
38485ae0d0
Deep redesign: revised FCD source serialization
2015-08-28 03:36:11 +02:00
f4exb
beadd4d861
Deep redesign: removed inheritance depedency between bladeRF serializer and sample source serializer
2015-08-28 03:26:57 +02:00
f4exb
77fed9a1c7
Deep redesign: revised RTLSDR source serialization. Optimisation of data to blob serialization
2015-08-28 03:20:00 +02:00
f4exb
5f0056f442
Deep redesign: revised source serialization mechanism and use dedicated classes for this purpose
2015-08-28 02:27:05 +02:00
f4exb
f4f9a74269
Deep redesign: Changed Funcube read block from 8192 to 2048 bytes to fix fluidity problem
2015-08-27 08:31:02 +02:00
f4exb
30b51b5888
Deep redesign: FCD: Fixed type in sample rate 960000 -> 96000 (Hz)
2015-08-27 06:36:17 +02:00
f4exb
c348cc62e0
Deep redesign: Fixed FCD interface so that it (only) basically works
2015-08-27 06:27:40 +02:00
f4exb
bb35ad6925
Deep redesign: use the Decimators class for BladeRF also
2015-08-27 04:20:56 +02:00
f4exb
03004b2eb9
Deep redesign: Fixed file source reporting to its GUI
2015-08-26 09:25:02 +02:00
f4exb
b185ef0558
Deep redesign: fixed RTLSDR decimation by exporting BladeRF decimators into a generalized templatized class (Decimators)
2015-08-26 02:42:31 +02:00
f4exb
5a0668f9ec
Deep redesign: fixed RTLSDR input plugin
2015-08-26 02:03:20 +02:00
f4exb
a68104ab65
Deep redesign: removed useless samplesource subdirectory
2015-08-25 08:31:57 +02:00
f4exb
60a8946ce4
Deep redesign: Init sequence review phase #5 : fixed source message forwarding for other sample sources
2015-08-19 22:12:08 +02:00
f4exb
23c956cf17
Deep redesign: Init sequence review phase #5 : fixed source message forwarding for BladeRF only
2015-08-19 09:24:44 +02:00
f4exb
fc3e9efa8a
Deep redesign: Init sequence review phase #3 : Implement sample source input messages handler
2015-08-19 01:45:06 +02:00
f4exb
30957e3002
Deep redesign: Init sequence review phase #1 : Fixing channel GUI init
2015-08-18 09:24:56 +02:00
f4exb
d6ae378e52
Deep redesign: debug phase #2 : App starting
2015-08-18 02:47:14 +02:00
f4exb
a6a7145f3d
Deep redesign: phase #4 . Compiles
2015-08-17 08:29:34 +02:00
f4exb
a7da0b76e2
Fixed startup initialization sequence: interim state #1
2015-08-12 09:03:02 +02:00
f4exb
85897281ee
more debug messages
2015-08-10 22:15:16 +02:00
f4exb
058fcdc4e1
Small sequence of calls re-org in Main Window. Better debug messages
2015-08-10 00:09:10 +02:00
f4exb
018c477af0
Fixed qDebug compile issues with std::string
2015-08-09 11:11:28 +02:00
f4exb
4ba6f66cac
Replaced direct output to console for debug messages with qDebug
2015-08-09 10:33:04 +02:00
f4exb
110956ba9c
File sample source plugin now functional
2015-08-06 01:43:35 +02:00
f4exb
047e9f3e24
File source: play/pause button implemented with stream timing update
2015-08-06 01:14:44 +02:00
f4exb
0603bb41ca
File source: renamed file source name message
2015-08-06 00:10:46 +02:00
f4exb
afdcf138d2
File source thread: changed chunk size and buffer size calculation so it is set in only one place
2015-08-06 00:10:23 +02:00
f4exb
3043a654e4
File source: hardcoded autoloop
2015-08-05 09:26:00 +02:00
f4exb
196cf51089
File source: effective file selection. Better definition of open, start and stop actions
2015-08-05 03:25:06 +02:00
f4exb
5b0cc63c72
Implemented GUI file dialog
2015-08-05 01:43:30 +02:00
f4exb
5dc5485b86
Fixed file source. Basically working
2015-08-04 23:45:32 +02:00
f4exb
75f10a3b63
File source debugging interim state #2 . Make file source GUI and input talk together
2015-08-04 04:17:24 +02:00
f4exb
fb167dad70
File source debugging interim state #1
2015-08-03 09:25:38 +02:00
f4exb
f9029e8572
Implemented a minimalist file source plugin (recording reader) compilable but untested
2015-08-03 01:04:20 +02:00
f4exb
6c93c0b9c7
Corrected BladeRF VGA2 steps
2015-08-03 00:02:24 +02:00
f4exb
2749af3225
RTLSDR GUI: Nixie color center frequency display
2015-08-02 01:45:53 +02:00
f4exb
5a0cb6d841
RTLSDR GUI: step 1 for mousewheel on ppm and decimation
2015-08-02 01:40:38 +02:00
f4exb
075ea2efad
Fixed BladeRF wrong RF bandwidth setting at startup
2015-07-29 00:08:27 +02:00
f4exb
3dba9a0ea9
Implemented minimalist recording
2015-07-28 23:54:17 +02:00
f4exb
6769dd3e8f
Fixed BladeRF wrong log2decim at startup
2015-07-27 01:09:24 +02:00
f4exb
5c0330e00a
Fixed BladeRF plugin LNA gain setting. Appended dB unit for gain
...
displays.
2015-07-26 20:44:05 +02:00
f4exb
be6899ebfd
Control checkboxes size of spectrum GUI. Corrected reverse gold color mapping and apply it to center frequency of BladeRD GUI
2015-07-19 22:00:38 +02:00
f4exb
5a13525ea1
Experimental slightly dimmer main frequency dial implmented for BladeRF plugin
2015-07-19 19:39:16 +02:00
f4exb
6d27dc5e0b
Sort channel plugins by delta frequency and type before saving to preset
2015-07-19 02:07:40 +02:00
f4exb
5a8c3d8e5b
Print scale on scope part #1
2015-07-06 09:17:51 +02:00
f4exb
78c944ce69
Added option to decimate around RF center frequency
2015-07-02 02:10:14 +02:00
f4exb
637c6e74f7
Added infradyne or supradyne option when decimating
2015-07-02 01:00:27 +02:00
f4exb
b6c762fe79
Removed useless low bitrates and added more useful rates
2015-06-11 00:47:59 +02:00
f4exb
ee49caaf55
Corrected scaling on decimator by 32
2015-06-10 03:26:06 +02:00
f4exb
d9a1e7942f
Save bandwidth in configs. Fixed some initial configuration problems
2015-06-09 08:18:32 +02:00
f4exb
5904a6f926
Corrected interpolator to alculate rational resampling for AM and WFM too. Revised and enhanced list of sampling rates. Change low tuning limit for XB200
2015-06-07 23:07:19 +02:00
f4exb
5ce7348bed
Added copyright notices for BladeRF plugin
2015-06-07 17:56:19 +02:00
f4exb
661ed3eb28
Enhancements to the decimator by 32
2015-06-07 17:50:16 +02:00
f4exb
833890a1ea
Added a decimation by 32 for BladeRF plugin
2015-06-07 11:26:23 +02:00
f4exb
1c7ea3dfb3
Added a plugin for BladeRF. Removed GNUradio from the build (gr-osmocom source) as this does not work properly
2015-06-07 03:30:28 +02:00
Edouard Griffiths
b2f384a630
Merge branch 'master' into f4exb
2015-05-26 03:09:41 +02:00
hexameron
00ed2c2004
Gain settings.
2015-05-21 18:09:12 +00:00
hexameron
c46e841a48
Correct V4L control IDs.
2015-05-21 15:32:18 +00:00
John Greb
5b475a5331
Try setting Gain & Bandwidth.
2015-05-20 18:43:01 +01:00
John Greb
6547711c16
Broken.
2015-05-18 21:43:04 +01:00
John Greb
f2c1b6e11e
Decimate more.
2015-05-18 15:18:00 +01:00
f4exb
26b9c324e7
Improved GNU Radio plugin usability. Removed osmosdr completely from the build as it is superceded by GNU Radio
2015-05-18 02:18:33 +02:00
hexameron
95fe79650c
Basic MSI support.
2015-05-17 16:48:51 +00:00
f4exb
695a1ca526
No support for Blade RF. This ends up my contribution. Bye!
2015-05-16 16:59:12 +02:00
f4exb
e9a93ff1c6
Tune SSB bandwidth by 100Hz steps. Use double arrow cursor on value dials
2015-05-11 01:36:53 +02:00
f4exb
e536a1f1e9
Better handling of rtlsdr GUI display when settings change (initial load, load of presets)
2015-05-10 00:09:56 +02:00
f4exb
b2e78e1411
Properly fixed frequency shift when there is no decimation
2015-05-09 19:03:17 +02:00
f4exb
7ea41283e8
Added basic variable decimation
2015-05-09 16:44:26 +02:00
f4exb
31fb81c66a
Implemented rtl-sdr ppm LO correction
2015-05-09 00:54:01 +02:00
John Greb
bce4aff21d
Uninitialised Gain Slider warning.
2015-05-05 18:21:30 +01:00
John Greb
73832a6c45
Clone Kernel SDR driver.
2015-03-31 18:46:29 +01:00
John Greb
6ac25f7bad
Linux 4.0
2015-03-29 21:56:21 +01:00
John Greb
c917ddf058
Default to 1M S/s for "best" s/n.
2015-01-17 16:13:19 +00:00
John Greb
4d83ca105c
Link FCD with libusb.
2015-01-15 10:57:05 +00:00
John Greb
06c50842ae
Boost.
2014-12-28 19:04:26 +00:00
hexameron
4c9dd644b8
Settings before streaming.
2014-12-10 18:24:01 +00:00
root
89e480313b
Debian 6.
2014-12-09 12:52:00 +00:00
John Greb
e2b1a06772
Tweak button layout.
2014-12-04 18:16:34 +00:00
hexameron
4ef7857aa5
SSB over TCP.
2014-12-03 18:41:38 +00:00
John Greb
acdc87ccc5
Set frequency before first capture.
2014-12-03 00:13:18 +00:00
John Greb
6704651786
Change settings from main context.
2014-12-02 19:00:12 +00:00
John Greb
9d18a9a1e9
Race condition.
2014-12-02 16:57:42 +00:00
John Greb
3ec45e00ad
Initial settings.
2014-12-02 15:39:37 +00:00
John Greb
c364378824
Bias T.
2014-12-02 14:23:21 +00:00
John Greb
f10a0b778d
Merge fcdctl.
2014-12-01 19:49:00 +00:00
John Greb
21578a555e
FCD Streaming.
2014-12-01 16:56:27 +00:00
John Greb
46dcbe6db7
Open FCD.
2014-11-30 21:59:06 +00:00
John Greb
beda489261
FCD template.
2014-11-29 18:09:35 +00:00
John Greb
ad68f6a06c
Wider maximum waterfall bandwidth.
2014-11-24 11:01:07 +00:00
hexameron
1964946afe
More warnings.
2014-11-23 09:22:02 +00:00
John Greb
836796fff4
Strict aliasing.
2014-11-22 21:55:35 +00:00
John Greb
3717af3f43
Quiet more warnings.
2014-11-21 19:44:19 +00:00
John Greb
0311f64527
Quiet some warnings.
2014-11-21 15:41:58 +00:00
John Greb
dcc9f1917c
Downsample filtering.
2014-11-17 19:51:36 +00:00
John Greb
333976fa6d
Working kernel driver.
2014-11-12 19:54:03 +00:00
John Greb
80a9d30fc3
Tidy.
2014-11-12 18:22:49 +00:00
John Greb
f78b2eebaf
Try Threading.
2014-11-12 17:37:46 +00:00
John Greb
1a46bf391e
Facepalm.
2014-11-11 12:01:42 +00:00
John Greb
84c43d517a
Extra samplerates.
2014-11-10 15:57:33 +00:00
John Greb
f793f635af
No-Mod Direct Sampling.
2014-11-09 12:56:53 +00:00
John Greb
812d0f4d15
Samplerate options.
2014-11-08 23:42:43 +00:00
John Greb
9c3b58d7a3
Direct sampling.
2014-11-07 19:26:02 +00:00
John Greb
1f63911faf
Open device.
2014-11-06 23:03:49 +00:00
John Greb
15da973edb
Cmake libv4l2.
2014-11-06 21:44:38 +00:00
John Greb
a476f8a6f0
Settings.
2014-11-06 21:03:17 +00:00
John Greb
86f256dbc4
Experimental Kernel swradio driver.
2014-11-05 21:19:25 +00:00
John Greb
62656fc45b
Borrow layer from GnuRadio Plugin.
2014-11-05 12:34:33 +00:00
John Greb
cce7115288
Template for (possible) kernel driver.
2014-11-03 17:13:32 +00:00
John Greb
d132f07bbe
Cast for 32bit API call.
2014-11-03 17:11:08 +00:00
Hexameron
34d2f8e504
Support decoding with waterfall at 96,192 and 384kHz.
2014-08-12 19:35:26 +01:00
Hexameron
3824642bff
Tweak UI.
2014-06-30 21:53:59 +01:00
Hexameron
cb8026b957
Correctness.
2014-06-27 18:46:14 +01:00
John Greb
bbe6d4505d
Waterfall brightness/overlap.
2014-06-10 12:24:52 +01:00
Hexameron
444e8ed857
Rework decimation.
2014-05-28 19:13:09 +01:00
Hexameron
aaef1678ad
meh.
2014-05-22 20:43:00 +01:00
Hexameron
d84f9a6da5
Tidy.
2014-05-22 12:58:17 +01:00
Hexameron
1361e55f47
Restore some logging.
2014-05-21 11:27:55 +01:00
Hexameron
82047f69ce
Consistant Waterfall speed.
...
Saves cpu at high bandwidths.
2014-05-19 15:22:44 +01:00
Hexameron
fbef672cd0
Offset tuning.
2014-05-18 17:04:24 +01:00
Hexameron
7d3bfb26fc
git clone git://git.osmocom.org/sdrangelove.git
2014-05-18 16:52:39 +01:00
