This repository holds cross-platform installers for a collection of open source **software radio** packages bundled with the [conda](https://conda.io/) package manager, including
The complete list of packages can be found [here](https://github.com/ryanvolz/radioconda/blob/master/radioconda.yaml). You can [**suggest additional software to include**](https://github.com/ryanvolz/radioconda/issues) by filing an [issue](https://github.com/ryanvolz/radioconda/issues). If you've built additional software from source on top of radioconda, [**document your results**](https://github.com/ryanvolz/radioconda/issues) in an [issue](https://github.com/ryanvolz/radioconda/issues) to help others (and help me in packaging it!).
Once installed, you will have a fully functional conda distribution/environment, meaning that you can use the `conda` or `mamba` commands to install additional packages (if available through [conda-forge](https://conda-forge.org/feedstock-outputs)) or upgrade to the latest versions. Think of radioconda as an alternative to [Anaconda](https://www.anaconda.com/products/individual) or [Miniforge](https://github.com/conda-forge/miniforge), but specialized for software radio.
**NOTE:** Radioconda is built from packages maintained by the [conda-forge](https://conda-forge.org/) project. If you have questions or issues that are specific to the conda installation of a particular package, please report them at the corresponding [feedstock repository](https://github.com/conda-forge/feedstocks).
## Download
Radioconda installers are available here: https://github.com/ryanvolz/radioconda/releases.
Launch "Conda Prompt" from the Start menu (you can find it under the "radioconda" directory). From this command line, you can run `mamba` to install/upgrade packages or run any of the applications installed with radioconda. Some applications can also be launched through shortcuts added to the Start menu.
Launch your favorite terminal. Depending on the options you chose while installing, you may or may not already have the radioconda "base" environment activated automatically (you will see "(base)" on your command line prompt). To otherwise activate the radioconda "base" environment, run:
conda activate base
If this fails because the `conda` command is not found, you can activate the environment manually by running
sh <PATH_TO_RADIOCONDA>/bin/activate
From an activated environment, you will be able to run `mamba` to install/upgrade packages or run any of the applications installed with radioconda.
### Installing packages
To install a particular package:
mamba install <pkg-name>
## Upgrade
Once you have radioconda installed, you can stay up to date for all packages with:
If you're starting with a fresh environment or are comfortable dealing with package conflicts, you can install the latest release using the `radioconda` metapackage from the `ryanvolz` channel:
(It is necessary to specify the `conda-forge` channel first, even if it is your default channel, so that the `ryanvolz` channel does not take priority.)
To use particular software radio devices, it might be necessary to install additional drivers or firmware. Find your device below and follow the instructions. (Help add to this section by filing an issue if the instructions don't work or you have additional instructions to add!)
[Install the WinUSB driver with Zadig](#installing-the-winusb-driver-with-zadig), selecting the device that is called "Bulk-In, Interface (Interface 0)".
Install the latest USB drivers by download and installing [this file](https://github.com/analogdevicesinc/plutosdr-m2k-drivers-win/releases/latest/download/PlutoSDR-M2k-USB-Drivers.exe).
Once you can talk to the hardware (by following the instructions below), you may want to perform the post-install steps detailed on the [Pluto users wiki](https://wiki.analog.com/university/tools/pluto/users).
The WinUSB driver for your device will most likely be installed automatically, and in that case there is no additional setup. If for some reason the driver is not installed and the device is not recognized, [install the WinUSB driver with Zadig](#installing-the-winusb-driver-with-zadig), selecting your Airspy device.
##### Linux users
Install a udev rule by creating a link into your radioconda installation:
# run the next line only for the Airspy R2 or Mini
The conda-forge package uses libusb to communicate over USB with your LimeSDR device, instead of the standard CyUSB library which is not open source. If you have used your LimeSDR with another software package, you will have to switch USB drivers to one compatible with WinUSB/libusb.
[Install the WinUSB driver with Zadig](#installing-the-winusb-driver-with-zadig), selecting your Lime device.
You probably have to install a USB driver for the device. Follow the instructions [from the Ettus site](https://files.ettus.com/manual/page_transport.html#transport_usb_installwin), or [install the WinUSB driver with Zadig](#installing-the-winusb-driver-with-zadig) (your device will have a USB ID that starts with 2500 or 3923).
##### Linux users
Install a udev rule by creating a link into your radioconda installation:
Each installer package is built from a specification directory in [installer_specs](https://github.com/ryanvolz/radioconda/tree/master/installer_specs) using [conda constructor](https://github.com/conda/constructor). An installer can be built manually using the [build_installer.py](https://github.com/ryanvolz/radioconda/blob/master/build_installer.py) script. The specification directories set the exact versions of the included packages so that `constructor` will produce a predictable result that can be tracked by git for each release. In turn, the specification directories are created/updated by _re-rendering_ the radioconda [environment specification file](https://github.com/ryanvolz/radioconda/blob/master/radioconda.yaml) using the [rerender.py](https://github.com/ryanvolz/radioconda/blob/master/rerender.py) script.
So, the procedure to create a new installer package is:
1. Update the environment specification file `radioconda.yaml`, if desired.
2. Re-render the constructor specification directories by running `rerender.py`.
3. Commit the changes to produced by steps 1 and 2 to the git repository.
4. Build the installer package for a particular platform by running `build_installer.py`.
### Release
To release a new version of radioconda and build installer packages using GitHub's CI:
