Joe Taylor
475fe79d05
Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop
2020-09-22 11:27:36 -04:00
Joe Taylor
dd296311cc
Disable TxFreqSpinBox, not RxFreqSpinBox if QSY during transmit is not allowed.
2020-09-22 11:25:59 -04:00
Bill Somerville
d1bb70fd1b
Show busy cursor while enumerating audio devices
2020-09-22 12:18:23 +01:00
Joe Taylor
8c9acfc464
Set default freq for JT9 on 2200 m to 0.136000 MHz.
2020-09-21 14:45:17 -04:00
Joe Taylor
9fe2fc6de0
Fix two problems: sometime incorrect setting of RxFreq in WideGraph, and incorrect timestamp for FST4W-120 and FST4W-300 decodes in ALL.TXT.
2020-09-21 14:35:16 -04:00
Bill Somerville
542ffe8311
Improve audio device handling and error recovery
...
where possible audio devices that disappear are not forgotten until
the user selects another device, this should allow temporarily missing
devices or forgetting to switch on devices before starting WSJT-X to
be handled more cleanly. If all else fails, visiting the Settings
dialog and clicking OK should get things going again. Note that we
still do not have a reliable way of detecting failed audio out
devices, in that case selecting another device and then returning to
the original should work.
Enumerating audio devices is expensive and on Linux may take many
seconds per device. To avoid lengthy blocking behaviour until it is
absolutely necessary, audio devices are not enumerated until one of
the "Settings->Audio" device drop-down lists is opened. Elsewhere when
devices must be discovered the enumeration stops as soon as the
configured device is discovered. A status bar message is posted when
audio devices are being enumerated as a reminder that the UI may block
while this is happening.
The message box warning about unaccounted-for input audio samples now
only triggers when >5 seconds of audio appears to be missing or over
provided. Hopefully this will make the warning less annoying for those
that are using audio sources with high and/or variable latencies. A
status bar message is still posted for any amount of audio input
samples unaccounted for >1/5 second, this message appearing a lot
should be considered as notification that there is a problem with the
audio sub-system, system load is too high, or time synchronization is
stepping the PC clock rather than adjusting the frequency to maintain
monotonic clock ticks.
2020-09-20 18:20:16 +01:00
Joe Taylor
1ab59a8d6b
Fully configure WideGpahe after switching to JT65 mode.
2020-09-20 10:17:27 -04:00
Joe Taylor
e79c5f6576
Minor edits to User Guide.
2020-09-20 10:16:08 -04:00
Joe Taylor
0ab3e5116f
Fix several flaws in the loop-over-NB logic in the FST4 decoder.
2020-09-19 10:08:42 -04:00
Joe Taylor
2af01ebaa1
Fix a flaw in the loop-over NB logic. There are more flaws!
2020-09-18 15:52:33 -04:00
Joe Taylor
327808a0bb
One more try at fixing the Fmax() startup problem that Steve sees.
2020-09-18 13:33:30 -04:00
Joe Taylor
f0ed93cdd0
In the NB-loop, don't cycle around a decode attempt for the npct=0 pass.
2020-09-18 11:45:28 -04:00
Joe Taylor
52bdd57e57
Implement NB=-1%, NB=-2%. Fix a startup problem with WideGraps's fMax value.
2020-09-18 11:30:23 -04:00
Joe Taylor
375a869a51
Revert "Revert "Very basic code (including some diagnostics) for "try all NB settings". Will remove it again.""
...
This reverts commit 033cc65d08
2020-09-18 09:01:51 -04:00
Joe Taylor
033cc65d08
Revert "Very basic code (including some diagnostics) for "try all NB settings". Will remove it again."
...
This reverts commit bcf7f36b9c
2020-09-17 19:30:07 -04:00
Joe Taylor
bcf7f36b9c
Very basic code (including some diagnostics) for "try all NB settings". Will remove it again.
2020-09-17 19:28:55 -04:00
Steven Franke
7d58df4cc1
In FST4 mode with Single Decode not checked, move candidates within 20 Hz of nfqso to the top of the list.
2020-09-17 14:22:38 -05:00
Joe Taylor
41aa5dae74
Make the FTol control invisible in FST4 if Single decode is not checked.
2020-09-17 12:58:59 -04:00
Joe Taylor
e60fc1ca19
FST4 GUI controls for FLow, FHigh, should disappear when Single Decode is checked. And some related improvements.
2020-09-16 20:16:32 -04:00
Joe Taylor
facd80dbf4
Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop
2020-09-16 17:25:23 -04:00
Joe Taylor
21dc6a5c59
Connect the FLow and FHigh limits for FST4 decoding.
2020-09-16 17:23:59 -04:00
Joe Taylor
2266e8dbb7
Add FLow and FHigh spinner controls to set the FST4 decoding range.
2020-09-16 17:02:40 -04:00
Bill Somerville
9356bec3a5
Updated translation files
2020-09-16 13:43:07 +01:00
Bill Somerville
2755afe466
Updated Catalan l10n, tnx to Xavi, EA3W
2020-09-16 13:42:15 +01:00
Bill Somerville
e48f71f424
Updated Spanish l10n, tnx Cédric, EA4AC
2020-09-16 11:45:55 +01:00
Bill Somerville
10fbcfc7d0
Updated l10n .TS files
2020-09-15 16:38:17 +01:00
Bill Somerville
baa9c4fdd4
Updated Italian l10n, tnx Marco, PY1ZRJ
2020-09-15 16:37:22 +01:00
Bill Somerville
c9e3c56c8e
Updated Spanish l10n, tnx Cédric, EA4AC
2020-09-15 16:35:52 +01:00
Bill Somerville
abe470b24a
Fix a typo
2020-09-15 15:53:14 +01:00
Bill Somerville
e4eb6eb94e
Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop
2020-09-15 10:31:04 +01:00
Steven Franke
221ede2903
Remove some unused variables.
2020-09-14 13:07:07 -05:00
Steven Franke
affe33091d
Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop
2020-09-14 13:03:38 -05:00
Steven Franke
b49a90f530
Remove a redundant array.
2020-09-14 13:03:33 -05:00
Joe Taylor
cada7e5777
Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop
2020-09-14 13:56:22 -04:00
Joe Taylor
3886411fad
Two more corrections to mode-switch settings of GUI controls in FST4/FST4W.
2020-09-14 13:55:30 -04:00
Steven Franke
832212b402
Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop
2020-09-14 12:42:36 -05:00
Steven Franke
1b59d9dc8c
Eliminate redundancies from the calculation of sequence correlations.
2020-09-14 12:42:32 -05:00
Joe Taylor
1a9d97a969
Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop
2020-09-14 10:59:34 -04:00
Joe Taylor
f20c45c167
FST4: Align WideGraph green bar with RxFreq on startup. CTRL-diouble-click on waterfall sets FTol=10 and calls decoder.
2020-09-14 10:56:54 -04:00
Steven Franke
ca0804450b
Remove some redundant code.
2020-09-14 09:07:45 -05:00
Steven Franke
3d8c8e3dd7
Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop
2020-09-14 09:00:35 -05:00
Steven Franke
98d52e35ac
Speed up FST4 decoding.
2020-09-14 09:00:30 -05:00
Joe Taylor
614f3037a9
Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop
2020-09-14 09:56:44 -04:00
Joe Taylor
8f554321c8
Make sure that Tx audio frequency in FST4 mode comes from FST4 TxFreq spinner, not the WSPR/FST4W spinner.
2020-09-14 09:55:33 -04:00
Bill Somerville
5014c62bfa
Notify user when enumerating audio devices
2020-09-13 17:12:11 +01:00
Bill Somerville
617d4eaa7f
Updated Chinese and Hong Kong UI translations, tnx to Sze-to, VR2UPU
2020-09-13 15:28:10 +01:00
Joe Taylor
39403c2520
Expand the range of allowable values for TxFreq in FST4W.
2020-09-13 09:38:39 -04:00
Joe Taylor
ec47811c27
Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop
2020-09-12 13:47:11 -04:00
Joe Taylor
a1baaebee9
Decoder should reject data with rms < 3.0 over first 15 seconds.
2020-09-12 13:46:09 -04:00
Bill Somerville
e096b77bc1
Ensure default FTol spin box range covers all possible values
...
This allows persistence between sessions to work correctly.
2020-09-12 15:58:25 +01:00
