2. ft8d is now a bare-bones multi-decoder.
3. wsjt-x now includes the bare-bones multi-decoder for FT8.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7729 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
These were using a hijacked custom spin box that was designed only for
letters i.e. submodes. Now there are two new custom spin boxes.
HistedSpinBox:- can be set with a list of integer values which the
step up and down will follow. Optionally limits the maximum and
minimum value to the upper and lower bounds of the values set. Note
that intermediate values are still valid.
RestrictedSpinBox:- more like a combo box because the provided values
are the only ones that can be set.
HintedSpinBox is used for the frequency tolerance and
RestrictedSpinBox is used for T/R period.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7698 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
CMake does not seem to recognize Fortran module file dependencies
correctly and sometimes builds them after modules that reference
them. This change moves all the module files to the beginning of the
library sources list so that they should always be compiled before use
after changes. I'm not sure this will work 100% reliably for
inter-module references so further reordering may be needed in future
if unexpected clean rebuilds are becoming necessary after module
source file changes.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7632 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Separate translation units avoids compiler generated CRC tables being
linked when not needed.
Also only compile once and add to wsjt_cxx library for later link
editing.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7631 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Using the CMake module GNUInstallDirs to set up standard locations
which allows better customisation for packagers building for various
distributions.
The change does change some internal package file paths and will leave
some files in old locations in Windows installations. Running
uninstall is probably wise on Windows before installing this new
package layout if future clean uninstalls are desired.
Linux and other *nix package maintainers can use the CMake variables
CMAKE_INSTALL_xxx to vary the install paths of various components. See
the CMake GNUInstallDirs module documentation for more details. An
example might be for Slackware where package documents are expected to
be installed into
<install-prefix>/doc/<package-name>-<package-version>/ whereas the GNU
default is to install them into
<install-prefix>/share/doc/<package-name>/. To achieve this set the
CMake variable CMAKE_INSTALL_DOCDIR as follows when configuring:
cmake -D CMAKE_INSTALL_DOCDIR:PATH=doc/wsjtx-1.7.1 -D CMAKE_INSTALL_PREFIX= ...
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7623 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
This change obseletes Mac OS X 10.7 and 10.8 which are not supported
by Qt 5.8.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7613 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
This builds on the static phase compensation in the MSK144 decoder and
the phase analysis and polynomial fitting capabilities also in teh
MSK144 decoder, by allowing captured data to be selected for phase
equalization from the WSJT-X UI.
Reads captured phase compensation curve estimate files containing
fitted polynomial coefficients and measured phase data from MSK144
receptions. Intent is to select a compensation curve that is from a
known transmitter like an SDR which have good phase linearity. Phase
plots and compensation polynomials may be viewed and compared with the
current compensation polynomial. A suitable polynomial can be applied
to be use in all further decoding of MSK144 signals.
Plots of the currently selected polynomial and its modified higher
order terms polynomial which is actually used in equalization (this
plot may be dropped - it is just for kicks at the moment). When a
captured phase analysis file is loaded plots of the measured phase and
the proposed best fit polynomial are shown.
Basic maintenance is also included allowing clearing and loading
captured plots and an option to revert to a flat no equalization
curve.
More to come on this as amplitude equalization is also possible, this
will probably be similar, maybe even plotted on the same graph with
dual axes for phase and amplitude. Amplitude correction from a
measured reference spectrum could be viewed and selected for
equalization for all modes. TBC...
This change also introduces the QCustomPlot 3rd party
widget. Currently this is statically linked from a qcp library built
by the WSJT-X CMake script. This will probably be migrated to a shared
object (DLL) build as a CMake external project, once some CMake script
re-factoring has been completed, which is more in line with the
QCustomPlot author's intentions. This will allow efficient reuse in
other tools shipped with WSJT-X.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7570 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
This issue was probably triggered by OpenMP forcing some large arrays
onto the stack where Fortran might normally make them static. The
change that seemed to make the difference was putting cdat2 in
msk144_freq_search into static storage. I am not convinced that the
problem is really solved but it works for now.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7130 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Also increase Windows stack size from 1Mbyte to 8Mbyte due to the
impact of Fortran arrays not being automatically moved to static
storage above a certain size. This needs attention by setting the SAVE
attribute on large arrays that do not need to be on the stack i.e. do
no need to be duplicated across OpenMP thread teams.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7122 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The change also includes a new MultiSettings feature that allows
settings keys common to all configurations. The splash screen disable
is the first of those to be used.
The MultiSettings class has been made safer to use by ensuring it
saves and re-enables the current QSettings group when doing multi
settings actions. This allows access to common, across configuration,
items while within a normal settings group without breaking the
MultiSettings internal implementation.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@7073 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Two new validator classes CallsignValidator and
MaidenheadLocatorValidator are introduced and used in the
Configuration and MainWindow implementations.
MaidenheadLocatorValidator supports different lengths and minimum
required lengths with a default of subsquare with square being
required.
The message_aggregator application has been enhanced to show the
current DX call and DX grid as shown in the WSJT-X main window.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6903 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Instead of using the Qt QMessageBox class directly a new class
MessageBox (MessageBox.hpp) has been added to deal with platform
independence issues like the title not being shown on Mac OS X.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6861 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Now exporting a shared and static version of the wsjtx_udp library.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6695 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
If needed then requires a newer CMake minimum version.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6692 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Build now creates and installs a UDP library that contains the server
side of the UDP messaging facility. This library is used by the
udp_daemon and message_aggregator reference examples. The new library
is currently a static archive but can also be built as a shared
library. The library allows third party Qt applications to easily
access UDP messages from WSJT-X.
Refactored the message_aggregator reference example to split out
classes into separate translation units. Added new functionality to
exercise the new UDP status fields, highlight own call, CQ/QRZ
messages and decodes near Rx DF.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6691 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Multiple configurations are accessed and maintained from a new main
window menu bar pop up menu "Configurations". The prior settings are
the "Default" entry. New configurations may be added by cloning
existing ones. Maintenance and navigation is via sub menus for each
configuration.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6623 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Setting the CMake option WSJT_RIG_NONE_CAN_SPLIT=ON will buold a
version taht allows split operating with the dummy rig. This must not
be shipped since it will generate incorrect Tx tones.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6589 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Hamlib now used libusb-1.0 and since that is available on Windows we
can now build with it across platforms. This change allows for that if
the custom USB backends are configured in Hamlib.
As it looks like Hamlib v3.1 will be suitable for WSJT-X this change
also puts in place what is needed to link to a Hamlib SO/DLL/DYLIB
when required. This is switched on by not defining the CMake variable
hamlib_STATIC. This could be used on Windows and Mac but Linux still
must have Hamlib statically linked due to repository versions being
too old.
For now Hamlib remains statically linked for consistency across
platforms.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6581 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The latest Clang shipped with Apple Xcode errors on unrecognized flags
that gcc/g++ accept. By using generator expressions the OpenMP flag
is now only applied to Fortran compiles when needed on Mac. Note that
this is necessary since the Apple Clang does not support OpenMP so we
have to hack the link to support OpenMP in jt9 by mixing gfortran OpenMP
object code with Clang/Clang++ object code.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6566 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. Add ability to set ndepth and do message averaging ti fer65.
3. Correct SNR values for measured Doppler width.
4. Comment out the "write(62..." diagnostics.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6537 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
1. Measure Doppler width by fitting a (modified) Lorentzian.
2. Don't call "slope" in sync65().
3. New definition of "sync1".
4. Get snr from sync1.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6536 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Clang++ detected some warnings that g++ did not.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6409 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Missing '/' character on directory URL. QUrl treats URLs not ending
with a '/' character as file URLS and QUrl::resolved() strips
filenames.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6393 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Broadcast Wave Format is a backwards compatible superset of teh
Microsoft WAV file format that has been implemented in teh hope that
Windows File Explorer might show the WAV file metadta, as it turns out
that is not the case but as it's done anyway.
It appears to be impossible to write a WAV file such that MS Windows
File Explorer shows any metadata so unless we adopt FLAC format audio
files we will have to show metadata with our own software :(
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6384 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The WAV file format allows for optional header content, allow for this
in preparation for adding some metadata to WSJT-X recorded WAV files.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6335 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Re-factor the JT4, JT65 and JT9 decoders as Fortran modules using type
bound procedures, the decoder types implement a callback procedure
such that he client of the decoder can interpret the decode results as
they need.
The JT4 decoder has a second callback that delivers message averaging
status. Also the previously separate source files lib/jt4a.f90 and
lib/avg4.f90 have been merged into lib/jt4_decode.f90 as private type
bound procedures of the new jt4_decoder type.
Re-factored the lib/decoder.f90 subroutine to utilize the new decoder
types. Added local procedures to process decodes and averaging results
including the necessary OpenMP synchronization directives for parallel
JT9+JT65 decoding.
Added the jt65_test module which is a basic test harness for JT65
decoding. Re-factored the jt65 utility to utilize the new jt65_test
module.
Changed a few integers to logical variables where their meaning is
clearly binary.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6324 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Groundwork for calling the decoders directly from C/C++ threads.
To access the timer module timer_module must now be used.
Instrumented code need only use the module function 'timer' which is
now a procedure pointer that is guaranteed to be associated (unless
null() is assigned to it, which should not be done). The default
behaviour of 'timer' is to do nothing.
If a Fortran program wishes to profile code it should now use the
timer_impl module which contains a default timer implementation. The
main program should call 'init_timer([filename])' before using 'timer'
or calling routines that are instrumented. If
'init_timer([filename])'. If it is called then an optional file name
may be provided with 'timer.out' being used as a default. The
procedure 'fini_timer()' may be called to close the file.
The default timer implementation is thread safe if used with OpenMP
multi-threaded code so long as the OpenMP thread team is given the
copyin(/timer_private/) attribute for correct operation. The common
block /timer_private/ should be included for OpenMP use by including
the file 'timer_common.inc'.
The module 'lib/timer_C_wrapper.f90' provides a Fortran wrapper along
with 'init' and 'fini' subroutines which allow a C/C++ application to
call timer instrumented Fortran code and for it to receive callbacks
of 'timer()' subroutine invocations. No C/C++ timer implementation is
provided at this stage.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6320 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Samples are downloaded from a web server, currently the SF download
server. The samples are stored in the source controlled samples
directory and the CMake script there builds a suitable directory tree
for upload to the web server under samples/web containing the samples
hierarchy and the generated JSON contents database file. The samples
CMake script also defines an 'upload-samples' target that uses rsync
to efficiently upload the samples and the accompanying contents JSON
database file.
Any directory structure under the samples directory may be created, to
add a new sample file simply add the file to source control and amend
the list of sample files (SAMPLE_FILES) in samples/CMakeLists.txt.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6308 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Also use correct C binding and have compilers determine sizes and
offsets.
The wsjtx.exe program now owns the decoder shared data that is shared
with symspec. It is now in struct dec_data, still a global variable
for now but hopefully a MainWindow member variable soon.
The struct dec_data (in both C/C++ and Fortran) has a sub structure
with the decoder parameters which enables copying and manipulating a
lot cleaner.
New of changed types of shared data must still be modified in
commons.h and a new file lib/jt9com.f90, they must stay in sync as a
pointer to the structure is passed between C and Fortran.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6290 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Build script now builds jt65. The tools jt65 and jt65sim usilize the
options module for all comamnd line parsing.
The tool jt65sim now has conventinal command line options and
switchs. Default values have been added where appropriate and options
documentation updated. An option to disable PRNG seeding has been
added.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6276 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
That is, right for all platforms with both local and package installs.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6248 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
This change will require the following CMakeCache.txt entries to be
deleted:
WSJTX_DATA_DESTINATION
WSJTX_DOC_DESTINATION
so that default values ca be substituted by CMake.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6244 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Locations of various components to be determined at configuration
time. This allows various "Standard" system layouts to be
accomodated. For example on FreeBSD the manpages are usually installed
in the man directory i.e. /usr/local/man whereas the WSJT-X default is
to install them in share/man i.e. /usr/share/man. By setting the CMake
variable WSJT_MANPAGE_DESTINATION to either a relative or absolute
path the install location can be set:
$ cmake -D WSJT_MANPAGE_DESTINATION=. ...
will install the manpages at ${CMAKE_INSTALL_PREFIX}/man
The new configuration variables are:
WSJT_BIN_DESTINATION
WSJT_LIB_DESTINATION
WSJT_SHARE_DESTINATION
WSJT_DOC_DESTINATION
WSJT_DATA_DESTINATION
WSJT_MANPAGE_DESTINATION
WSJT_PLUGIN_DESTINATION
WSJT_QT_CONF_DESTINATION
NB: changes to the above may break WSJT-X at present where the install
locations of files used directly by WSJT-X are moved.
Warning: using absolute paths for these variables is not recommended
as files may be installed in unexpected places, particularly when run
with root privileges. All relative paths with be relative to
CMAKE_INSTALL_PREFIX.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6192 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
A small application demonstrating the usage of the MessageServer class
to implement a companion C++ application that utilizes the WSJT-X UDP
message protocol. It does not do anything useful but could be extended
to do many things.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6146 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
For some reason the inclusion of referenced libraries was not finding
the right libraries when using CMake 3.3 and Qt 5.5. This was probably
a long standing defect that was benign until teh above versions.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5868 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The latest Qt headers try and disable a compiler warning that CLang++
doesn't support.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5732 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Bring wsprd and wsprsim in to line with general includes scheme.
Use Qt5 exported library definitions in preference to
qt5_use_modules() which is deprecated.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5663 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The Rx meter is now a better Qt citizen and can be resized. Added a
more obvious peak signal indicator. It is now a custom widget derived
from QFrame and is now directly added via promotion in Designer.
Added a custom widget to act as a letter spin box, this is used for
sub mode control. Switched the frequency tolerance widget to a combo
box with preset values so that it is more uniform across systems and
font sizes.
Added container widgets for group control of various UI widgets such
as QSO controls, DX call controls and WSPR controls. Introduced a
stacked widget to allow the WSPR controls to be swapped in in place of
the "QSO" controls. The "QSO" controls are are the Rx, Tx and related
controls along with the main tab widget with the message buttons and
fields. This means that the WSPR version of the main window (and EME
Echo mode) are now much cleaner.
Increased the size of the rig control widget and styled its colour
using a dynamic property so that it can be defined in the Designer UI
definition. Reinstated it as a push button to do a rig control reset
and retry after an error.
Reset most UI widgets to default properties, particularly removing any
fixed sizes so that they can resize freely when fonts are changed. The
overall layout is now controlled almost exclusively by stretch factors
on some of the rows and columns of the various grid layout managers.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5630 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
If an out of source build is done using a source tree that has
previously been used for an in source build then we must ensure that
generated files in the source tree are not considered.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5550 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
lib/hopping.f90 has been superceded by C/C++ code except for the call
to grayline() which is now called directly.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5545 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Provide a dialog for band hopping scheduling which replaces tab
four. Ensure that split mode is not used for WSPR. Select the correct
tab for WSPR operation. Shift WSPR band hopping code out of the
MainWindow class.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5517 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Access in CMake via ${WSJT_SHARE_DESTINATION}/${WSJT_DATA_DESTINATION}
Access in wsjtx.exe using Configuration::data_dir()
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5487 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Trying to find the sweet spot for completeness, usefulness, safety
and, performance from the various custom item models and item
delegates.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5474 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Working frequencies are mode dependent and a reset to defaults button
has been added.
Also re-factored much of the model and item delegate code to simplify
several of the model implementations. Introduced a single routine
called from main to register the custom types with Qt.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5453 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
This merge brings the WSPR feature development into the main line
ready for release in a future v1.6 release.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5424 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Since the FFTW3 includes have been fixed for C/C++, Hamlib library headers
other than the found ones were being incorrectly picked up. This has been
resolved by ensuring that the Hamlib include directory is passed to the
compilers first.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5371 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Also added Tx status to status UDP message.
Added the above features to the reference UDP server
message_aggregator.
Merged from the wsjtx-1.5 branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5334 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The user guide is now installed with the product version in the name
so serving the same file from the project web server will allow
multiple manual versions to be easily supported.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5320 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
These documentation source files are not the one true version, just a
copy for testing purposes. DO NOT EDIT THESE FILES.
To use this on Windows you will need a working asciidoc installation
and the path to it must be included in your CMAKE_PREFIX_PATH
(probably via a local CMake tool chain file). At the time of writing
the official asciidoc package does not work on Windows. The latest
development master does however work, it can be downloaded as a
snapshot ZIP archive from here:
https://github.com/asciidoc/asciidoc/archive/master.zip
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5316 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Release builds were incrorrectly selecting a high level of Hamlib
trace verbosity.
Added a new CMake option to turn on maximum Hamlib trace verbosity
when required (WSJT_HAMLIB_VERBOSE_TRACE default=OFF). The current
WSJT_HAMLIB_TRACE (default=OFF) now only turns on tracing at warning
level and above, this option must be set ON before the
WSJT_HAMLIB_VERBOSE_TRACE option becomes available. Release
configuration builds use a Hamlib trace level of error or above by
default.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5261 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The CMake option WSJT_CREATE_WINMAIN is now available for both release
and debug configuration builds so it may be disabled in any Windows
build configuration if required.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5250 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Don't make proper Windows applications in debug builds. This means
that the debug output now goes to the console and the program
(wsjtx.exe) no longer detaches from the console.
If you require a proper Windows executable, for instance if you are
getting the debug output via the normal method of attaching a
debugger, you can still do so by setting the CMake configuration
option WSJT_CREATE_WINMAIN to ON for your debug build configuration on
Windows.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5249 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
We now have a dependency on libQt5SerialPort and require Qt v5.2 or
newer.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5232 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
To facilitate interaction with other applications WSJT-X now sends
status updates to a predefined UDP server or multicast group
address. The status updates include the information currently posted
to the decodes.txt and wsjtx_status.txt files. An optional back
communications channel is also implemented allowing the UDP server
application to control some basic actions in WSJT-X.
A reference implementaion of a typical UDP server written in C++ using
Qt is provided to demonstrate these facilities. This application is
not intended as a user tool but only as an example of how a third
party application may interact with WSJT-X.
The UDP messages Use QDataStream based serialization. Messages are
documented in NetworkMessage.hpp along with some helper classes that
simplify the building and decoding of messages.
Two message handling classes are introduced, MessageClient and
MessageServer. WSJT-X uses the MessageClient class to manage outgoing
and incoming UDP messages that allow communication with other
applications. The MessageServer class implements the kind of code
that a potential cooperating application might use. Although these
classes use Qt serialization facilities, the message formats are
easily read and written by applications that do not use the Qt
framework.
MessageAggregator is a demonstration application that uses
MessageServer and presents a GUI that displays messages from one or
more WSJT-X instances and allows sending back a CQ or QRZ reply
invocation by double clicking a decode. This application is not
intended as a user facing tool but rather as a demonstration of the
WSJT-X UDP messaging facility. It also demonstrates being a multicast
UDP server by allowing multiple instances to run concurrently. This is
enabled by using an appropriate multicast group address as the server
address. Cooperating applications need not implement multicast
techniques but it is recomended otherwise only a single appliaction
can act as a broadcast message (from WSJT-X) recipient.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5225 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
This fixes a defect where station detail changes are not saved.
The Qt sort and filter proxy models utilize an item cache that must be
flushed by callig submit() before accessing the underlying model if
the proxy model has been used for updates.
Also separated the item model candidate key filter from the
implementation internals of the foreign key item delegate so that
candidate key filtered models can be used directly as view models.
Make the insert new station details band combo box use a candidate key
filtered item model to avoid constraint violations. Constraint is zero
or one station records per band.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5161 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
This file is created at run time and is not needed in the deployment
package. Also removed from source control to avoid further
misunderstandings.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5139 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
This change generates all the resources using a CMake function
add_resources() and substitution into a template .qrc file. The
location of resource files in the source tree is no longer related to
the path of the resources in the embedded executable resources file
system. Instead the roesources are embedded with predetermined paths
e.g. :/, :/Palettes/ and, :/samples/ .
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5131 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The compilation of the WSJT-X resources file requires a lot of virtual
memory because of the large .WAV files included. For developers
building on very limited resource machines like single board embedded
platforms there is now an option WSJT_EMBED_SAMPLES which can be set
to OFF to skip the inclusion of the sample files in the WSJT_X binary.
The sample files may still be added manually to the target machine if
required.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5130 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The temporary development version of jt9 called jt9_omp is now the
default jt9. This means that parallel decoding of JT65 and JT9 is the
default on platforms that support OpenMP.
If parallel decoding is not required or desired, it can be constrained
by setting the environment variable OMP_THREAD_LIMIT=1. In dual mode
operating this will deliver all decodes of the current mode before any
decodes of the other with the potential impact of taking up to twice
as long to finish decoding.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4960 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Colours behave like other configuration items and changes are only
applied when the Settings UI is dismissed via the "OK" button.
Simplified font settings and use style sheets consistently to set the
application and decoded text fonts. This is necessary because any UI
widget that has a style sheet applied does not honor a font set by
QWidget::setFont() even if there is no font setting in the style
sheet, this is broken behaviour IMHO but that is the way Qt currently
works.
Use a style sheet to style the frequency display and clock. This is
necessary to allow fonts to be cascaded through parent style sheets
and still be overridden on these widgets.
Simplify the decoded text widgets, there is no need to use the
QTextBrowser as a super class since the simpler QTextEdit set as
read-only is sufficient. Also removed colour setting via a background
brush as it doesn't work and the HTML 'bgcolor' attribute works
correctly.
Change to UI properties of the decoded text widgets to allow
horizontal scrolling if required, this allows larger fonts to be used
without truncating decoded messages.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4957 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
procedure; better window functions for some FFTs, resulting in
better decoder performance; User-selectable colors for backgrounds
of decoded messages. NB: more testing is desirable!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4951 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The native Mac C/C++ compilers (Clang) do not support OpenMP so CMake by
default disables OpenMP for the project since it requires all project compilers
to support it. This means that we have to hack the build script on Mac to
compile the Fortran sources with OpenMP turned on and manually link in the
required OpenMP run time support to the executables.
This hack presumes that the Fortran compiler on Mac is gfortran.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4947 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Also moved the same large array from stack to heap which along with
other prior changes now allows the Windows jt9 OpenMP executable to
run with a default stack size again.
This also removes a crash on the Mac version which was probably due to
excessive stack usage.
Net result is an even faster JT9 decoder.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4942 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Set the CMake variables CMAKE_OSX_SYSROOT and CMAKE_OSX_DEPLOYMENT_TARGET
must be set before the project() command since they can effect compiler
detection and capability tests.
Only use the -stdlib=libc++ option on Mac OS X when using Clang tools.
On other platforms with Clang tools libc+ is not currently the best choice.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4938 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
More detailed message to come, with comparative timing statistics.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4926 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
This change introduces the program jt9_omp which is a testbed for a
multi-threaded version of the jt9 decoder program. The program jt9_omp
should be a directly substitutable for jt9 except that JT65 and JT9
decodes are computed in parallel.
Also enable the OpenMP directives in decoder.f90 - note this is not
yet a working multi-threaded decoder and the existing jt9 is still the
correct decoder to be used in WSJT-X.
Increased the available stack size for jt9_omp.exe as this is a hard
limit on Windows and the default is not big enough for the OpenMP
version of jt9.
Also Fortran array bounds checking is now disabled for Release
configuration builds so as to improve performance a little.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4922 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The long FFTs can now use the multi-threaded FFTW routines.
Subroutine decode9.f90 was renamed jt9fano.f90.
The JT9 decoder's top-level functions were removed from decoder.f90
and put into a separate subroutine decjt90.f90.
Subroutine decoder.f90 is now configured for possible use of OpenMP
SECTIONS, with the JT9 and JT65 decoders running concurrently on
a multi-core machine. Note, however, that this concurrent processing
is not yet fully implemented. Probably calls to timer need to be removed;
some variables used in calls to jt65a and decjt9 may need to be
declared PRIVATE in decoder; some sections probably need to be declared
CRITICAL; probably some SAVE statements in downstream routines have
made them not thread-safe; etc., etc.
I'm a neophyte at using OpenMP. Comments, suggestions, and/or tests by
others will be welcome!
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4919 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
New command-line option for jt9: [-m nthreads]. Default is nthreads=1.
Also refactored a loop in filbig.f90 that was taking far too much
time.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4916 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The kvasd binary need only be downloaded if the MD5 hash for it has
changed.
Also fixed a defect in the status check of the MD5 hash download.
Also switched to HTTP protocol as it is quick and gives clearer error
messages.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4830 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The rigctl program is not used directly by WSJT-X but it does contain
the same Hamlib code from the Hamlib v3 fork as WSJT-X and
rigctld-wsjtx. So it makes sense to distribute it as a testing tool or
for any user that needs it to converse with the rigctld-wsjtx server.
Merged from wsjtx-1.4 branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4775 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Pass the temporary directory to jt9 and use it to give the correct
paths to temporary files. Also jt9 passes the absolute path to
kvasd.dat in the temporary directory to kvasd.
Clear out all the annoying cruft that has accumulated due to having to
run with $CWD as the temporary directory.
Use QStandardPaths to find the writable data directory where needed
rather than passing it around between objects. This now works because
the $CWD hasn't been changed.
Do away with the CMake option WSJT_STANDARD_FILE_LOCATIONS as it is no
longer needed.
Fix astro status file azel.dat formatting.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4732 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
To comply with the WSJT_X GPL v3 license, the closed source KVASD
executable must be delivered separately and optionally to end
users. To facilitate this a new install option has been added to the
Windows installer to install KVASD by downloading it at install
time. The installer first downloads the KVASD EULA from the Internet
and presents it to the user for reading and agreement. If agreement
is given the KVASD binary is downloaded from the Internet and
checksummed using an MD5 hash, if that passes, it is installed along
with WSJT-X. An uninstall record is also written to ensure that, if
installed, KVASD will be un-installed if WSJT-X is un-installed.
To facilitate this enhancment to the NSIS installer the standard CPack
NSIS installer script template has been overridden with a project
specific version. This version also implements the more modern and
recomended nsDialogs mechanism for installer custom page construction
including the install options page. See CMake/Modules/NSIS.template.in
for details and CMakeCPackOptions.cmake.in for usage in this
installer.
Merged from branch wsjtx-1.4.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4663 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Also complete the wrapper code in wisdom.c.
TBD: should be possible to use fftw3f.f03 instead of the ad hoc wisdom.c.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4617 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
To allow personal builds on Mac OS X on 10.7 where no 10.9 SDK is
available, the key options have been made CMake ached variables so
that they may be overridden at configure time.
Merged from wsjtx-1.4 branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4585 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
In order to support the WSJT-X super build in LOCAL mode the location
of the User Guide needs to be specified.
A CMake cache variable WSJT_MANUAL_DIRECTORY has been added to allow
the URI of the User Guide directory to be specified at configure time.
The default value remains as the project web site.
Merged from branch wsjtx-1.4.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4566 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
CMake v3 complains about missing dependencies so the manpages
dependency must not be added to the wsjtx target unless it exists.
Merged from wsjtx-1.4 branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4564 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The debian target was being added as a dependency to teh wsjtx target
even when it doesn't exist. This isn't allowed in CMake v3 so it no
longer added if it doesn't exist.
Merged from wsjtx-1.4 branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4562 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The minimum OS X version supported and SDK selection compiler options
were not being set for Fortran compiles on Mac.
As CMake 3.0.2 is the current release the facilities obsoleted by
CMake 3.0 have been removed. This also entails making CMake 2.8.10 the
minimum supported version.
Merged from wsjtx-1.4 branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4560 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The normal way to view console output from a Windows GUI application
(i.e. with a WinMain entry point) is to attach a debugger which will
then receive the application console output in its own console.
If it is required to build wsjtx.exe as a console application it may
be done by setting the new WSJT_CREATE_WINMAIN CMake option to
OFF. This option is only available for Debug configuration builds to
avoid accidental shipping of non-Debug configuration builds as a
console application.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4555 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The DMG volume name must not change between versions as it invalidates
the .DS_Store file backgound image.
Merged from wsjtx-1.4 branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4548 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Routine packmsg now tries the shortlist (Type 1 prefix or suffix) first.
Then it tries to to make a valid message using a Type 2 prefix or suffix.
If both fail, it packs the first 13 characters as a free-text message.
The GUI now generates the most useful messages with compound callsigns
of all valid types.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4533 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The justified text in the project description caused many unwanted
hard line breaks when viewed in Debian package install tools.
Merged from wsjtx-1.4 branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4512 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Debian packages are only build if dpkg-buildpackage is available and
RPM package generation is only done if rpmbuild is available.
Merged from wsjtx-1.4 branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4504 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The kavasd binary is not open source so cannot be automatically
bundled with WSJT-X on Linux.
The CMake option WSJT_INCLUDE_KVASD has been added with a default of
OFF in Linux Release configuration builds.
Merged from wsjtx-1.4 branch.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4498 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
An ambiguity existed between release candidates and development
versions as there was no definitive identification for development
versions.
Added a new version number suffix of '-devel' which appears if the
release candidate number is missing or zero in Versions.cmake and the
revision is not marked as a release version, also in Versions.cmake.
Also re-factored setting of version number suffiexes to a single place
in in CMake/VersionCompute.cmake.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4422 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
This was generated in error by selecting one of the source CPack
generators as a default.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4408 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The *nix package generators do not include the target architecture in
the package file names.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4382 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The location of documentation files on Linux distributions is
controlled to a certain extent. Using the QStandardPaths::locate()
method helps us with this.
Work round the misbehaviour of QCoreApplication::applicationDirPath()
when the CWD has been changed by working out the documentation
location before changing the CWD to a temporary directory. This path
is now provided by the Configuration settings class which also manages
other run time paths.
Updated Debian packaging to move a little nearer a conforming DEB
file.
Added a basic manpage for rigctld-wsjtx.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4364 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
So that a manual can be viewed without an Internet connection a second
manual action has been added to the WSJT_X help menu. This shells out
to the default web browser with a local file target.
The build has been enhanced to install and package the current version
of the HTML user manual as downloaded from the project web site at
build time
The package file locations have been adjusted to be compatible with
the QStandardPaths class so that its locate() method can be used to
portably access resources like this local help file
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4359 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The Apple clang LLVM compilers do not support the gcc options
data-sections, function-sections and, gc-sections so we must not add
them on Mac builds.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4356 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The -mwindows linker option is not explicitly required since it is
added automatically to WIN32 executables by CMake.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4355 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Use the data-sections and function-sections gcc/g++ compiler options
to create sections for each function and data item then use
gc-sections in the link to discard all unreferenced sections.
This has most benefit if the hamlib library we statically link is also
compiled with data-sections and function-sections.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4351 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Use the WSJTX_RC variable in Versions.cmake to label and identify
program and packages.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4338 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Because WSJT-X currently uses Hamlib-3 (statically linked) it also
needs a version of rigctld with Hamlib-3 statically linked for any
user that wishes to use the "Hamlib NET rigctld" CAT interface to
remotly access a rig via IP using the Hamlib network control protocol.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4297 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
These programs are mentioned in the user guide so have been added to
the depolyable packages.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4254 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Since the manual URL is used in both the installer and the WSJT-X code
the definition of the URL (CMake variable PROJECT_MANUAL) is defined
in the CMakeList.txt file and propagated to the source via the
wsjtx_config.h header.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4252 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Sometimes parts of the application are not fully ready for release at
release time. This option allows such features to be enabled
conditionally at configure time.
The CMake option WSJT_ENABLE_EXPERIMENTAL_FEATURES is used to control
this ability. Normally you will not need to change it as it behaves
in a reasonable way. The option is ON in debug build configurations
and OFF in non-debug configuratiuons.
The option is made available in all source modules via the
WSJT_ENABLE_EXPERIMENTAL_FEATURES macro which is defined to 1 if the
option is ON and to 0 if it is OFF.
Since this default behavior is potentially dangerous because it can
mean that release builds contain different code from debug builds; the
option may be set to OFF in debug configurations in the normal way
(cmake-gui, edit CMakeCache.txt, etc.) to achieve a debug build
similar to a default release build.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4182 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
part of r4046. These caused GUI installer packages to be incomplete.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4058 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Non-Debug build on *nix platforms now require a2x, it is optional
for other build configurations.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4050 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Added a manpages sub-project to generate man pages for wsjtx from
AsciiDoc source.
Add items required by Debian packaging and Free Desktop Standards.
Add better command line processing to wsjtx including version and help
options.
Add a new command line option 'test-mode' that invokes the Qt test
mode where all writable file locations are moved to a common
directory. This is to allow application testing from a repeatable
start point rather than have the test application sharing files with
normal operations. See QStandardPaths::setTestModeEnabled() for
details of the test location.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4046 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
WSJT-X has a capability of redirecting Qt debugging output (qDebug,
qWarning etc.) to a trace file 'wsjtx_trace.log' which is created in
the application run directory if not already present.
Setting the CMake build option WSJT_QDEBUG_TO_FILE to ON will enable
this feature.
It should be noted that this option is not compatible with a
distributibutable official release since writing to the application
directory is not recommended. Also in a full Release configuration
build all Qt debugging code is elided so no useful trace would be
obtained anyway.
The CMake option WSJT_QDEBUG_IN_RELEASE may be useful in concert with
this option as it causes Qt debugging statements to remain in place in
a Release build configuration. Again not recommended in a full
Release build since the debugging code both slows down the application
and adds unecessary bloat to the executable size.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4032 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Fixing revsion lookup issues is painfully public since one has to
commit a change to test it.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4018 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
all types of build.
CMake builds use 'svn info' (the git-svn equivalent is also supported)
to get the real latest revision of the workspace that is used to
source a build. If the sources are not in VCS workspace (build from
source snapshot archive for example) then the $Rev$ svn keyword
expansion in mainwindow.cpp is used despite its issues with accuracy.
Non-CMake builds use the $Rev$ keyword expansion where possible.
If a CMake build is from a VCS workspace with local modifications; a
'-dirty' suffix is added to the revision number to denote that.
If no revision number information can be found the word 'local' is
used as a revision number.
The revision specification is used in the WSJT-X "about" box and is
sent to PSKReporter.info as part of the local station information
(this can be viewed at the statistics page
http://pskreporter.info/cgi-bin/pskstats.pl).
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4017 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Now I have verified that the CW envelope shaping considerably reduces
the bandwidth of teh CW id. I have made the it default. It can still
be turned off via a CMake option if desired.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4013 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
default).
Reorganized Modulator interface so that it can control the stream
it writes to.
Make sure only QAudioOutput::stop is called at the end of sending
rather than QAudioOutput::reset which discards pending samples.
Added a quick close option to the Modulator::stop slot to discard
pending buffers if required.
Fix issue in CW synthesizer that was causing CW to be inverted
occasionally.
Made global arrays of symbols volatile because compiler waa
optimizing away reads in sound thread. These global variables
must go eventually as they are a multi-threading hazard.
Simplified TX sequencing to remove some duplicate signals.
Increased range of TX attenuator from 10dB to 30dB. This is mainly for
non-Windows platforms where the attenuator isn't linearized correctly.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3985 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
linking requirements.
Changed build to use static hamlib if available.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3975 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The new class WFPalette encapsulates waterfall palettes including
exporting and importing to disk files and interpolation for use in the
waterfall plotter.
A special entry in the palette list "User Defined" is now available
along with a button to invoke a colour palette designer. The user
defined palette definition is persistent across runs as it is saved in
the application settings file.
Palettes can now have any number of colours up to 256.
The export function may be used to save user designed palettes; to be
added to the built in resource palettes that are shipped with the
application.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3964 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
compromising qmake builds. Now it is required to directly include
svnversion.h to get the SVNVERSION macro defined.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3955 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
The lookup was broken and always returning 'local'.
It now returns 'local' for a non svn source tree,
'r<revno>-dirty' for a source tree with uncommitted changes,
'r<revno>' for a clean svn source tree.
Unversioned files are ignored for now.
Also added some diagnstics output in CMake script to aid debugging Qt
plugin location issues.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3934 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
This allows writable files to be located in the "correct"
location for each platform rather than in the directory of
the executable which, in general, is not recommended or
allowed in some cases.
A preprocessor macro WSJT_STANDARD_FILE_LOCATIONS is used to
switch be tween old and new functionality, currently it is on
by default. It can be turned off by defining it to a false
value (0) or more simply with cmake-gui setting the option
with the same name. JTAlert can only work with the old
non-standard file locations until Laurie VK3AMA chooses to
support the new file locations.
Even if the above is not enabled; the QSettings file is
written to a user specific location so it will be shared by
all instances of the program (i.e. across upgrades). See
below for multiple concurrent instance support changes.
Added a command line parser module for Fortran.
Added 'lib/options.f90' to facilitate more complex argument
passing to jt9 to cover explicit file locations.
Changed the way multiple concurrent instances are handled.
This is to allow the program to be run multiple times from
the same installation directory.
A new wsjtx command line optional argument is available "-r"
or "--rig" which enables multiple concurrent instance
support. The parameter of the new option is a unique name
signifying a rig or equivalent. The name is used as the
shared memory segment key and in window titles. The name is
also used to access unique settings files and writable data
files like ALL.TXT and log files. No attempt has been made
to share these files between concurrent instances.
If "-r" or "--rig" is used without a parameter it still
enables multiple concurrent instance support for that
instance. All instances must use a unique parameter, one of
which may be empty.
The rig name is appended the
QCoreApplication::applicationName() for convenient usage like
window titles.
Set non Qt locale to "C".
This ensures that C library functions give consistent results
whatever the system locale is set to. QApplication follows
the system locale as before. Thus using QApplication and its
descendants like widgets and QString for all user visible
formating will give correct l10n and using C/C++ library will
give consistent formatting across locales.
Added top level C++ exception handling to main.cpp.
Because the new transceiver framework uses exceptions
internally, the main function now handles any exceptions that
aren't caught.
Retired devsetup, replaced with Configuration.
Configuration is a class that encapsulates most of the
configuration behavior. Because rig configuration is so
closely coupled with rig operation, Configuration serves as a
proxy for access to the rig control functions. See
Configuration.hpp for more details of the Configuration
interface.
Menu changes.
Various checkable menu actions moved from main menu to the
Configuration dialog. The whole settings menu has been
retired with the single "Settings..." action moved to the
file menu for consistency on Mac where it appears as
"Preferences" in line with Mac guidelines.
New data models for data used by the application.
ADIF amateur band parameters, free text message macros, spot
working frequencies and, station information (station
descriptions and transverter offsets per band) each implement
the QAbstractItemModel interface allowing them to be used
directly with Qt view widgets (Bands.hpp, FrequencyList.hpp
and, StationList.hpp). Configuration manages maintenance of
an instance of all but the former of the above models. The
ADIF band model is owned by Configuration but requires no
user maintenance as it is immutable.
Band combo box gets more functionality.
This widget is now an editable QComboBox with some extra
input capabilities.
The popup list is still the list of spot working frequencies,
now showing the actual frequency decorated with the band
name. This allows multiple spot frequencies on a band if
required.
The line edit allows direct frequency entry in mega-Hertz
with a completer built in to suggest the available spot
working frequencies. It also allows band name entry where
the first available spot working frequency is selected.
Recognized band names are those that are defined by the ADIF
specification and can be found in in the implementation of
the ADIF bands model (Bands.cpp).
If an out of band frequency is chosen, the line edit shows a
warning red background and the text "OOB". Out of band is
only defined by the ADIF band limits which in general are
wider than any entities regulations.
Qt 5.2 now supports default audio i/p and o/p devices.
These devices are placeholders for whatever the user defines
as the default device. Because of this they need special
treatment as the actual device used is chosen at open time
behind the scenes.
Close-down behavior is simplified.
The close-down semantics were broken such that some objects
were not being shut down cleanly, this required amendments to
facilitate correct close down of threads.
User font selection added to Configuration UI.
Buttons to set the application font and the font for the band
and Rx frequency activity widgets have been added to the
Configuration UI to replace the file based font size control.
Free text macros now selected directly.
The free text line edit widgets are now editable combo boxes
that have the current free text macro definitions as their
popup list. The old context menu to do this has been
retired.
Astronomical data window dynamically formatted and has font a chooser.
This window is now autonomous, has its own font chooser and,
dynamically resizes to cover the contents.
Double click to Tx enabled now has its own widget in the status bar.
QDir used for portable path and file name handling throughout.
The "Monitor", "Decode", "Enable Tx" and, "Tune" buttons are now
checkable.
Being checkable allows these buttons control their own state
and rendering.
Calls to PSK Reporter interface simplified.
In mainwindow.cpp the calls to this interface are
rationalized to just 3 locations.
Manipulation of ALL.TXT simplified.
Moved, where possible, to common functions.
Elevated frequency types to be Qt types.
Frequency and FrequencyDelta defined as Qt types in their
meta-type system (Radio.hpp). They are integral types for
maximum accuracy.
Re-factored rig control calls in mainwindow.cpp.
The new Configuration proxy access to rig control required
many changes (mostly simplifications) to the MainWindow rig
control code. Some common code has been gathered in member
functions like qsy(), monitor(), band_changed() and
auto_tx_mode().
Rig control enhancements.
The rig control for clients interface is declared as an
abstract interface (See Transceiver.hpp). Concrete
implementations of this interface are provided for the Hamlib
rig control library, DX Lab Suite Commander via a TCP/IP
command channel, Ham Radio Deluxe also via a TCP/IP command
channel and, OmniRig via its Windows COM server interface.
Concrete Transceiver implementations are expected to be moved
to a separate thread after construction since many operations
are blocking and not suitable for running in a GUI thread.
To facilitate this all instantiation of concrete Transceiver
instances are handled by Configuration using a factory class
(TransceiverFactory) for configuration parameter based
instantiation.
Various common functionality shared by different rig
interface implementations are factored out into helper base
classes that implement or delegate parts of the Transceiver
interface. They are TransceiverBase which caches state to
minimize expensive rig commands, it also maps the Transceiver
interface into a more convenient form for implementation
(template methods). PollingTransceiver that provides a state
polling mechanism that only reports actual changes.
EmulateSplitTransceiver that provides split operation by
QSYing on PTT state changes.
EmulateSplitTransceiver can be used with any implementation
as it follows the GoF Decorator pattern and can wrap any
Transceiver implementation.
OmniRigTransceiver is derived directly from TransceiverBase
since it doesn't require polling due to its asynchronous
nature. OmniRigTransceiver is only built on Windows as it is
a COM server client. To build it you must first install the
OmniRig client on the development machine
(http://www.dxatlas.com/omnirig/).
DXLabSuiteCommanderTransceiver derives from
PollingTransceiver since it is a synchronous communications
channel. No third party library is required for this
interface.
HRDTransceiver also derives from PollingTransceiver. The HRD
interface library has been reverse engineered to provide
functionality with all available versions of HRD. No third
party libraries are required.
HamlibTransceiver likewise derives from PollingTransceiver
since the Hamlib asynchronous interface is non-functional.
Although this class will interface with the release version
of Hamlib (1.2.15.3); for correct operation on most rigs it
needs to run with the latest master branch code of Hamlib.
During development many changes to Hamlib have been submitted
and accepted, hence this requirement. Hamlib source can be
obtained from git://git.code.sf.net/p/hamlib/code and at the
time of writing he master branch was at SHA 6e4432.
The Hamlib interface directly calls the "C" interface and the
modified rigclass.{h,cpp} files have been retired.
There is a rig type selection of "None" which may be used for
non-CAT rigs, this is actually a connection to the dummy
Hamlib device.
PollingTransvceiver derives from TransceiverBase and
TransceiverBase derives from the Transceiver interface.
Each interface implementation offers some possibility of PTT
control via a different serial port than the CAT port. We
also support PTT control directly via a second serial port.
This is done by delegating to a dummy Hamlib instance which
is only used for PTT control. This means that
DXLabSuiteCommanderTransceiver, HRDTransceiver and
OmniRigTransceiver always wrap a dummy HamlibTransceiver
instance. The factory class TransceiverFactory manages all
these constructional complexities.
Serial port selection combo boxes are now editable with a
manually entered value being saved to the settings file.
This allows a non-standard port device to be used without
having to edit the settings file manually.
For TCP/IP network CAT interfaces; the network address and
port may be specified allowing the target device to be
located on a different machine from the one running wsjtx if
required. The default used when the address field is left
blank is the correct one for normal usage on the local host.
Selecting a polling interval of zero is no longer possible,
this is because the rig control capability can no longer
support one way connection. This is in line with most other
CAT control software.
In the Configuration dialog there are options to select split
mode control by the software and mode control by the
software. For the former "None", "Rig" and "Fake it" are
available, for the latter "None", "USB" and, "Data" are
available. Because tone generation is implicitly linked to
split mode operation; it is no longer possible to have the
software in split mode and the rig not or vice versa. This
may mean some rigs cannot be used in split mode and therefore
not in dual JT65+JT9 until issues with CAT control with that
rig are resolved. Single mode with VOX keying and no CAT
control are still possible so even the most basic transceiver
setup is supported as before.
Configuration now supports a frequency offset suitable for
transverter operation. The station details model
(StationList.hpp) includes a column to store an offset for
each band if required.
CMake build script improvements.
The CMakeLists.txt from the 'lib' directory has been retired
with its contents merged into the top level CMakeLists.txt.
Install target support has been greatly improved with the
Release build configuration now building a fully standalone
installation on Mac and Windows. The Debug configuration
still builds an installation that has environment
dependencies for external libraries, which is desirable for
testing and debugging.
Package target support is largely complete for Mac, Windows
and, Linux, it should be possible to build release installers
directly from CMake/CPack.
Cmake FindXXXX.cmake modules have been added to improve the
location of fftw-3 and Hamlib packages.
Version numbers are now stored in Versions.cmake and work in
concert with automatic svn revision lookup during build. The
version string becomes 'rlocal'± if there are any uncommitted
changes in the build source tree.
Moved resource like files to Qt resources.
Because location of resource files (when they cannot go into
the installation directory because of packaging rules) is
hard to standardize. I have used the Qt resource system for
all ancillary data files. Some like kvasd.dat are dumped out
to the temp (working directory) because they are accessed by
an external program, others like the audio samples are copied
out so they appear in the data directory under the default
save directory.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3929 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
unwanted cmd shell windows from jt9.exe and kvasd.exe launches.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3873 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Added more install files and removed installation of old docs.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3846 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2. The main window can be expanded wider to allow those with large screens to use larger fonts
3. New class DecodedText handles the formatted text from decoder.f90.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3564 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
Change source URLs in teh CMake scripts for the kvasd binaries.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3563 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
