w4kek/WSJT-X
1
0
Fork 0
mirror of https://github.com/saitohirga/WSJT-X.git synced 2024-11-10 22:26:23 -05:00
Code Issues Packages Projects Releases Wiki Activity
9,104 Commits 5 Branches 98 Tags 208 MiB
48b1ad1e46
Commit Graph

2957 Commits

Author SHA1 Message Date
Joe Taylor
171e466389 More work on Q65 message averaging. 2020-12-24 09:51:02 -05:00
Joe Taylor
844930fe75 Correct the frequency alignment of red sync curve. 2020-12-23 11:03:09 -05:00
Joe Taylor
c5a0de6210 Partial implementation of Q65 message averaging. 2020-12-23 09:47:11 -05:00
Joe Taylor
008cb37c16 Update test_q65 for having removed the T/F sync flag from q65sim command line. 2020-12-22 13:41:40 -05:00
Joe Taylor
408ac7bd0d Correct the reported f0 for Q65 signals. It was off by one tone spacing. 2020-12-22 13:21:31 -05:00
Joe Taylor
cac6577127 Extend the DT range for 30 s Q65 submodes to include EME delays. 2020-12-22 09:43:25 -05:00
Joe Taylor
83c917ac57 Don't allow previous values of DT, f0 to be displayed with a no-decode. 2020-12-21 15:59:33 -05:00
Joe Taylor
044aa80dc4 Remove all vestiges of the QRA64 mode. It has been replaced by Q65. 2020-12-21 15:07:53 -05:00
Joe Taylor
36a089de21 Remove the sync-test option from q65sim.f90. 2020-12-21 13:42:03 -05:00
Joe Taylor
44516dbbc1 Make the Q65 red sync curve at least 21 tone-spacings wide, even if FTol is smaller. 2020-12-21 13:33:54 -05:00
Joe Taylor
545079e951 Reorder the ibw loop in q65_loops.f90. 2020-12-20 21:43:30 -05:00
Joe Taylor
ddf727f351 Adjust a 3 dB offset in Q65 SNRs from list decodes. 2020-12-20 21:42:42 -05:00
Joe Taylor
1f33c857ac Measure fSpread from ccf1, then use resulting width to set effective ibwmin. 2020-12-19 13:25:51 -05:00
Joe Taylor
c7ca708569 Fix the problem with not honoring "Save Decoded" in Q65 mode. 2020-12-19 11:42:42 -05:00
Joe Taylor
f23129c33c Fix a problem with Q65 FTol range extending down below 0 Hz. 2020-12-19 11:25:18 -05:00
Joe Taylor
7096a548ec Correct a problem with estimating rms of ccf for Q65-300x submodes. 2020-12-19 10:42:27 -05:00
Joe Taylor
89ab3b0f01 Fix a bounds error with very small FTol. 2020-12-18 16:30:11 -05:00
Joe Taylor
450249dd4c Add a DT label to the Q65 red sync curve. 2020-12-18 16:19:01 -05:00
Joe Taylor
67b82c7666 Remove the klunky 2D sync plot. The red sync curve is better. 2020-12-18 16:00:33 -05:00
Joe Taylor
b3769bb6c8 For Q65, plot a red "Sync curve" in the Wide Graph. 2020-12-18 13:31:14 -05:00
Joe Taylor
d165532dc5 Oops! Committed the wrong version of q65_decode.f90. 2020-12-17 19:06:07 -05:00
Joe Taylor
8507a42655 Quasi-graphical display of the sync ccf(f0,DT). 2020-12-17 17:02:28 -05:00
Joe Taylor
6b8abe32b1 One more protection against too-large FTol. 2020-12-16 15:51:46 -05:00
Joe Taylor
a47ec75f56 Reformat the test_q65 headings and output. 2020-12-15 13:17:31 -05:00
Joe Taylor
0ee61205aa Disable diagnostic writing to 'fort.55' in CWD. 2020-12-15 11:37:48 -05:00
Joe Taylor
841bbac56e Increase the Q65 list decodes to include reports -50 to +49 dB. 2020-12-15 11:03:06 -05:00
Joe Taylor
3160e63dc7 Several minor tweaks to Q65 decoding. 2020-12-15 09:32:24 -05:00
Joe Taylor
99377e4c24 Measure avg and rms of estimated SNR values, for comparison with generated SNRs. 2020-12-15 09:31:29 -05:00
Joe Taylor
cd95df4089 Protect against pathological combinations of RxFreq and FTol. 2020-12-09 13:45:05 -05:00
Joe Taylor
84591fa2ef Protect against a bounds error with very large FTol. 2020-12-08 11:53:22 -05:00
Bill Somerville
2964bc6295
Merge branch 'develop' into feat-fst280 2020-12-06 22:27:07 +00:00
Joe Taylor
4b42937c35 Minor tweaks in q65_sync. 2020-12-06 08:12:58 -05:00
Joe Taylor
f948ba7c29 Allow fDop = 0.0 in test_q65. 2020-12-06 08:12:16 -05:00
Joe Taylor
a47f5e5103 Correct what appears to be an error in q65_intrinsics_fastfading: max hidx=63, not 64? 2020-12-06 08:09:28 -05:00
Joe Taylor
53f5e26580 First attempt ar reasonabkle values for nsmo and ibw range. 2020-12-05 13:46:44 -05:00
Joe Taylor
c50134691d Adjustments to test_q65 for wider submodes. 2020-12-05 13:46:07 -05:00
Joe Taylor
742e2ef59f Fix pctile for larger arrays. 2020-12-05 11:09:27 -05:00
Joe Taylor
9f8336de4e Code cleanup. 2020-12-05 11:09:15 -05:00
Joe Taylor
077811ae6d Update q65params.f90. 2020-12-05 11:03:16 -05:00
Joe Taylor
6416777278 Set ':' as the "mode character" for Q65. 2020-12-04 15:55:03 -05:00
Joe Taylor
8b9b71c894 Fix the "off by one" issue in measuring f0 for list decodes. 2020-12-04 15:37:54 -05:00
Joe Taylor
3dd34e13ba dd "MyCall DxCall DxGrid" to list. Set PLOG_MIN=-240. No list decoding if DxCall is not defined. 2020-12-04 15:29:46 -05:00
Joe Taylor
aaf832cbd2 Revert "Threshold in q65_sync.f90 increased to -250 only for reports. Assumes that the list is in the order defined in q65_set_list.f90 (reports are at indexes 5..56). Beware if q65_set_list is changed!!!" 
This reverts commit bb08150e4b.
 2020-12-04 12:56:45 -05:00
Joe Taylor
978ea0f3b5 Revert "forgot to uncomment fort.55 output. corrected" 
This reverts commit 72bc2572e6.
 2020-12-04 12:56:23 -05:00
Nico Palermo/IV3NWV
72bc2572e6 forgot to uncomment fort.55 output. corrected 2020-12-04 10:07:56 +01:00
Nico Palermo/IV3NWV
bb08150e4b Threshold in q65_sync.f90 increased to -250 only for reports. Assumes that the list is in the order defined in q65_set_list.f90 (reports are at indexes 5..56). Beware if q65_set_list is changed!!! 2020-12-04 09:43:41 +01:00
Joe Taylor
53e4052b8c Q65 additions for diagnostic purposes. 2020-12-03 14:28:30 -05:00
Bill Somerville
ac6a6d0cd7
Fail wsprd if data directory specified not accessible 
Also fixed trivial memory leak on error exit.
 2020-12-03 13:12:12 +00:00
Bill Somerville
3134dd8a60
Removed incorrect pointer declaration, tnx to Rud, K5RUD 2020-12-03 12:20:14 +00:00
Joe Taylor
d1ac5f71e2 Remove several diagnostic writes. 2020-12-01 11:31:52 -05:00
Joe Taylor
df3169ba22 Update test_q65. 2020-12-01 11:24:21 -05:00
Joe Taylor
6b540aaad0 Correct offset in (i,j) indices for selecting s3 from s1. 2020-12-01 11:23:35 -05:00
Nico Palermo/IV3NWV
70e0a84fe8 corrected a compile error. q65_llh declared as an external variable in q65.h and placed in q65.c 2020-12-01 04:13:30 +01:00
Nico Palermo/IV3NWV
68d964b5c7 merged Joe's changes in decode_fullaplist 2020-12-01 03:41:23 +01:00
Nico Palermo/IV3NWV
baf427c358 Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-12-01 03:26:37 +01:00
Nico Palermo/IV3NWV
5a3dd69331 decode_fullaplist updated. the decoding threshold is now adjusted in function of the number of codewords passed 2020-12-01 03:26:00 +01:00
Joe Taylor
a03758e490 Add a file that was missing. 2020-11-30 17:44:33 -05:00
Joe Taylor
65dda491d2 More Q65 code cleanup. Make submodes higher than A work with List Decoding. 2020-11-30 15:20:19 -05:00
Joe Taylor
7cb87e315b Fix a format. 2020-11-30 14:15:59 -05:00
Joe Taylor
adc4c3d78a More Q65 cleanup. Single-digit at end of line. 2020-11-30 14:13:37 -05:00
Joe Taylor
5c947178ce Protect against a bounds error. 2020-11-30 13:26:14 -05:00
Joe Taylor
de6f5e4975 Q65 code cleanup. Use 3-digit format for the end-of-line flag. 2020-11-30 13:14:18 -05:00
Joe Taylor
8285fd28a8 List decoding now supports 57 list messages. 2020-11-30 11:41:50 -05:00
Joe Taylor
afc4f2fb54 Reorganize things in q65_sync. 2020-11-30 10:45:52 -05:00
Joe Taylor
9ff6f5b4d3 Temporary save, much work in progress. 2020-11-30 09:52:47 -05:00
Joe Taylor
64516e6abb Still testing various parts of the Q65 decoding chain. 2020-11-29 10:00:33 -05:00
Joe Taylor
f0a1694816 Minor code cleanup. 2020-11-28 10:12:12 -05:00
Joe Taylor
cbfb6dd250 Implement full-message sync possibility when QSOprogress > 0. 2020-11-23 14:30:36 -05:00
Joe Taylor
d76e56fa31 Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 
Include code to try sync with full message info.
 2020-11-23 08:47:37 -05:00
Nico Palermo/IV3NWV
6fa9f76a75 Interface to q65_intrinsics_fastfading changed to support B90Ts instead of B90 and then supporting correctly modes with any T/R interval 2020-11-23 06:03:59 +01:00
Joe Taylor
9c51e93f06 Implement Nico's "deep likelihood" to replace iaptype=4 and 75-bit APmask. 2020-11-22 13:58:29 -05:00
Nico Palermo/IV3NWV
de468e071a Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-11-21 18:18:45 +01:00
Joe Taylor
b2833fd6f0 Fix the use of ndepth for setting jitter-loop limits. 2020-11-21 11:34:17 -05:00
Nico Palermo/IV3NWV
4bd7fcb4a1 added likelihood check for better false rejection - added function q65_decode_fullaplist for full-ap decoding of a list of codewords 2020-11-21 17:00:15 +01:00
Joe Taylor
8e4ed9b3be Fix a bug in jt65_decode: crash when Rx Freq is set too close to upper freq limit on waterfall. 2020-11-21 10:12:46 -05:00
Joe Taylor
6da4be174c We now have only 4 levels of AP decoding. Modify test_q65 accordingly. 2020-11-21 09:39:37 -05:00
Joe Taylor
d9cb870540 Adjust Q65 jitter-loop ranges according to ndepth. 2020-11-20 17:07:11 -05:00
Joe Taylor
7ff3d598c8 Use g15 = 32403 rather than 32373 for the "RR73" message fragment in Q65. 2020-11-20 15:40:25 -05:00
Joe Taylor
09815826e2 For Q65 with QSOprogress=3, reduce npasses to 2 (iaptype=3, 4 only); reduce APmast from 78 to 75 bits. 2020-11-20 15:16:23 -05:00
Joe Taylor
3662a76de7 More Q65 test program tweaks. 2020-11-19 15:41:15 -05:00
Joe Taylor
13d0b20661 Change the unmasked bits for iaptype 4, 5, 6. Tweak the SNR limits in test_q65. 2020-11-19 15:25:28 -05:00
Joe Taylor
0bcb2f0d11 Adjust SNR limits in test_q65. 2020-11-19 13:50:59 -05:00
Joe Taylor
44343d87f6 Allow input of fractional SNR to test_q65. 2020-11-19 13:45:16 -05:00
Joe Taylor
d26acd048c Minor tweak to test_q65. 2020-11-17 15:31:33 -05:00
Joe Taylor
2dcd8504e8 Updates to test_q65: allow command-line input of QSOprogress. 2020-11-17 15:09:03 -05:00
Joe Taylor
d3ed0be318 Allow 2-digit input of ndepth in test_q65. 2020-11-17 10:47:07 -05:00
Joe Taylor
e71bc50bbf Set irc to -9, DT and f0 to 0 if sync amplitude it too small. 2020-11-16 16:29:52 -05:00
Joe Taylor
0755e52993 Another reformatting of output to fort.53. 2020-11-16 13:49:31 -05:00
Joe Taylor
24ed64e5cc Add UTC and reformat diagnostic output to fort.53. 2020-11-15 12:21:08 -05:00
Joe Taylor
4903b38220 When jt9 is run from command line, set Q65 default FTol = 10. 2020-11-15 11:58:36 -05:00
Joe Taylor
dc3d567ce8 Correct the diagnostic output to fort.53. 2020-11-13 13:45:14 -05:00
Joe Taylor
91862e61e6 Display Q65 values of DT and f0 from the actual decode, not just values from sync_q65. 2020-11-13 13:40:16 -05:00
Joe Taylor
8703b66983 Update test_q65.f90. 2020-11-11 15:20:35 -05:00
Joe Taylor
5fe6a539b6 Fix an error in defining dat4(13) in Q65 mode. Not backward compatible! Also fix AP and message averaging for Q65. 2020-11-11 15:06:24 -05:00
Joe Taylor
3068f0c61f Use genwave() to create Q65 audio signal. Send "include averaging" flag to Q65 decoder. 2020-11-11 11:14:02 -05:00
Bill Somerville
de0af5a2ed
Merge branch 'feat-outgoing-udp-interface' into develop 2020-11-10 20:09:48 +00:00
Joe Taylor
56a3201d14 Reactivate Q65 message averaging, and fix the reporting of those decodes. 2020-11-10 10:14:41 -05:00
Steven Franke
e0888eb70c Restore wsprsimf and dependencies. 2020-11-06 09:33:44 -06:00
Joe Taylor
145ddb8821 Correct the false-decode test in test_q65. 2020-11-03 17:17:21 -05:00
Joe Taylor
6d8958bce6 Code cleanup. 2020-11-03 15:49:11 -05:00
Bill Somerville
1a223f5c45
Remove unwanted file and directory 2020-11-03 20:29:25 +00:00
Joe Taylor
a01ebab363 Improve sync_q65() for larger values of FTol. 2020-11-03 11:31:21 -05:00
Joe Taylor
2c51c97b14 Increase the Q65 minimum snr1 from 2.5 to 2.8. 2020-11-03 10:36:19 -05:00
Joe Taylor
1b541082fd Optimize the Q65 inner loops. Also more code cleanup. 2020-11-02 16:04:46 -05:00
Joe Taylor
fa92799bda OPtimize the 2020-11-02 15:59:10 -05:00
Joe Taylor
1768971931 Add timer calls for two of Nico's routines. 2020-10-31 11:33:01 -04:00
Joe Taylor
abbb277793 Fix the issue with using AP for the "i3" bit and 78th bit. 2020-10-31 11:15:03 -04:00
Joe Taylor
b3f0aec407 Q65: compute snr from esnodb, using actual symbol rate. 2020-10-30 14:52:58 -04:00
Joe Taylor
306c0c8633 Limit the Q65 DT search rnge to +/- 1 s for TR=15, 30 s. 2020-10-30 12:02:15 -04:00
Joe Taylor
f974751e42 Q65 AP decoding is now (sort of?) working. Problem with i3 field, and maybe other problems... 2020-10-30 11:07:44 -04:00
Joe Taylor
1c30b97228 More adjustments for adding AP decoding to Q65. 2020-10-29 10:53:30 -04:00
Joe Taylor
e2978abcf5 Pass ncontest and lapcqonly to the Q65 decoder. 2020-10-29 10:33:54 -04:00
Joe Taylor
7786101dcf Add a missing file. 2020-10-28 13:38:06 -04:00
Joe Taylor
b6071d29da Code cleanup. 2020-10-28 12:04:10 -04:00
Joe Taylor
347fb06382 Separate calls to q65_intrinsics_ff() and q65_dec(). 2020-10-28 09:28:50 -04:00
Joe Taylor
fca76a5730 Report Q65 average decodes to the callback routine so test_q65 can distinguish them. 2020-10-27 16:28:25 -04:00
Joe Taylor
494a8fc9a7 More cleanup: Q65 SNRs, reported irc values. 2020-10-27 16:08:50 -04:00
Joe Taylor
bbad483aaf Code cleanup in q65sim.f90. 2020-10-27 15:52:57 -04:00
Joe Taylor
c6424100a2 Code cleanup. 2020-10-27 15:52:26 -04:00
Joe Taylor
9643e8a753 Code cleanup. 2020-10-27 15:51:32 -04:00
Joe Taylor
a41325d596 Use fast fading model in q65_ftn_test. 2020-10-27 15:45:34 -04:00
Joe Taylor
5d904927a0 Decode Q65 using the Lorentzian fast fading model. 2020-10-27 13:56:25 -04:00
Joe Taylor
4d739a31ca Minor cleanup of Q65 decoder sequence. Much more needed! 2020-10-27 13:22:02 -04:00
Joe Taylor
2dad27f1ad First decodes of Q65 from within wsjtx. 2020-10-27 13:08:07 -04:00
Joe Taylor
5a2f9e4f3f Updte q65sim to use the new Q65 code. 2020-10-27 12:04:15 -04:00
Joe Taylor
ccdaf49e3a Must initialize Q65 codec is decode is called before encode. 2020-10-27 12:02:49 -04:00
Joe Taylor
a473cee2ea Move q65sim.f90 to the q65 directory. 2020-10-26 19:42:03 -04:00
Joe Taylor
0d8734de47 Update some path names for QRA64/Q65 files. 2020-10-26 19:25:16 -04:00
Joe Taylor
cc5e0c7f2c Add a Fortran program to test calls to Nico's Q65 codec. 2020-10-26 16:54:05 -04:00
Bill Somerville
731fe53a1e
Reasonable default values for NB setting for command line jt9 
Use the -X command option to set  single decode mode and to set the NB
level.

    -X 256*(n+3)+s

Where s=32  selects single decode mode,  and 'n' is the  equivalent NB
setting as used in the WSJT-X UI.  Default for both is zero in FST4(W)
mode if no -X option is passed. E.g. -X 544 selects single decode with
NB=-1 (256*(-1+3)+32).
 2020-10-26 20:20:52 +00:00
Joe Taylor
11ec2eebf0 Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-10-25 21:31:34 -04:00
Joe Taylor
5d352d3068 Declare _q65_mask() as static when first declared, in q65.h. Add qracodes.o to Makefile.Win. 2020-10-25 21:29:44 -04:00
Nico Palermo/IV3NWV
676d3578f1 removed unused qra65 files 2020-10-26 02:20:44 +01:00
Nico Palermo/IV3NWV
1f06fd65fc Initial q65 distrib 2020-10-26 01:10:53 +01:00
Joe Taylor
ef2c63af29 Enable some changes for Q65 submodes F, G, H. (They won't decode without additions to the core Q65 decoder.) 2020-10-25 15:44:52 -04:00
Joe Taylor
7a22e6a2e1 Change the Q65 value of nsps from 7680 to 7200. 2020-10-25 14:10:38 -04:00
Joe Taylor
9b452e8f99 Change mode name QRA65 to Q65 everywhere, supposedly. 2020-10-25 13:58:18 -04:00
Bill Somerville
5efe448a9c
Cosmetic change 2020-10-23 03:32:22 +01:00
Bill Somerville
308d815fb5
Add --freq-tolerance (-F) jt9 option 2020-10-23 03:24:19 +01:00
Joe Taylor
90fb84e43e All QRA65 submodes and sequence lengths 15 - 300 s are now basically functional. 2020-10-22 19:20:56 -04:00
Joe Taylor
37e5489080 QRA65 submodes A-E now basically OK for 15, 30, 60, 120 s sequences; 300 s is NG. 2020-10-22 19:07:21 -04:00
Joe Taylor
687d60019e Working toward functionality for sequence lengths other than 60 s. 2020-10-22 15:56:20 -04:00
Joe Taylor
b68ccee2fa Correct a flaw in assigning bin numbers for in sync64(), fixing QRA65 submodes B C D E. 2020-10-22 14:05:20 -04:00
Joe Taylor
0ce6556611 Slight reduction in snr1 limit after sync_qra65(). 2020-10-20 22:05:43 -04:00
Joe Taylor
7fe18a0a8c Reset the default values in qra_params.f90. 2020-10-19 18:56:54 -04:00
Joe Taylor
a17a519324 Send QRA65 navg to the callback routine. 2020-10-19 18:49:52 -04:00
Joe Taylor
ef3b158d43 QRA65 message averaging assumes a fixed DT close to zero. 2020-10-19 18:35:50 -04:00
Joe Taylor
35d8574426 Basic message averaging implemented for QRA65. 2020-10-19 17:27:11 -04:00
Joe Taylor
df69562a9f More tweaks to QRA65 decoder. 2020-10-19 15:24:32 -04:00
Joe Taylor
3187be3848 Improved qra_loops(). 2020-10-19 11:29:48 -04:00
Joe Taylor
1f2ca15ee5 Allocate some big arrays on the heap. 2020-10-17 13:16:46 -04:00
Joe Taylor
3f68f075e8 Tweak some QRA65 decoding ideas. 2020-10-17 11:19:15 -04:00
Joe Taylor
8542af30f9 Default ibwmin set to 0 in qra_params(). 2020-10-16 18:42:31 -04:00
Joe Taylor
2aa999ba44 Improved version of qra_params() subroutine, for testing. 2020-10-16 14:44:13 -04:00
Joe Taylor
4bf5f23c54 Update QRA test programs. 2020-10-14 11:49:27 -04:00
Joe Taylor
ad70cdeb8a More work on sync tests, etc., of QRA6[45]. 2020-10-13 13:49:09 -04:00
Bill Somerville
90b3fa2a46
Merge branch 'release-2.3.0' into develop 2020-10-13 16:51:40 +01:00
Bill Somerville
dcc9ac11ee
Merge branch 'develop' into feat-fst280 2020-10-10 15:26:17 +01:00
Joe Taylor
d5ce2def09 Code cleanup. 2020-10-09 17:04:06 -04:00
Joe Taylor
e82da4484c Code cleanup. 2020-10-09 15:29:16 -04:00
Joe Taylor
538b0b91ab Move s3, s3a arrays into qra_loops. 2020-10-09 14:12:34 -04:00
Joe Taylor
a4ba64a5fa Code cleanup and documentation. 2020-10-09 13:16:25 -04:00
Joe Taylor
8612398b02 Minor tweaks to test_qra65. 2020-10-09 10:44:25 -04:00
Joe Taylor
c5502cda05 QRA65 now decodes using qra_loops() -- the same inner loops as QRA64. Very effective! 2020-10-08 16:48:11 -04:00
Joe Taylor
5e23f88f7e Save a working temporary state for QRA64/QRA65 decoders. 2020-10-07 16:04:00 -04:00
Bill Somerville
6026944e33
Workaround for some memory issues, possibly thread stack sizing 
Reduced maximum thread team size for MSK144 candidate discovery to 4.
 2020-10-07 13:12:20 +01:00
Bill Somerville
314be8ccb7
Merge branch 'develop' into feat-fst280 2020-10-06 19:25:06 +01:00
Joe Taylor
69f7cea5e6 Formatting adjustments to qra64a.f90; updates to test_qra6[45].f90. 2020-10-06 10:29:03 -04:00
Joe Taylor
f38f355395 Many tweaks to QRA64 decoder to optimize processing of 6m ionoscatter signals. 2020-10-05 09:50:55 -04:00
Bill Somerville
ead587ee55
Fix up out of date common block sizing 2020-10-04 22:52:51 +01:00
Joe Taylor
333fac1fae Code cleanup. 2020-10-04 15:32:08 -04:00
Joe Taylor
20fb18c8ae Minor code cleanup. 2020-10-04 15:22:45 -04:00
Joe Taylor
95ec019da3 Improvements to test_qra64.# Please enter the commit message for your changes. Lines starting 2020-10-04 12:29:18 -04:00
Bill Somerville
203e0da5d6
Fix up out of date common block sizing 2020-10-04 00:45:56 +01:00
Joe Taylor
359b97f1ad Tweak test_qra64.f90 2020-10-03 11:02:18 -04:00
Joe Taylor
5d1fb28d2b Working on test_qra6[45].f90. 2020-10-03 08:25:17 -04:00
Joe Taylor
9200c3e27a Add NB = -3% option to cycle through NB=0, 1, 2, 3, ... 20%. 2020-09-30 13:32:03 -04:00
Joe Taylor
c3d8e4dd73 Working on QRA65, including simulator and test program. 2020-09-26 16:49:06 -04:00
Joe Taylor
acd6253373 A few more fixups for QRA65. Not finished, yet! 2020-09-25 15:38:20 -04:00
Joe Taylor
443aee5355 Restore AGC action in sync_qra65(). 2020-09-25 13:31:43 -04:00
Joe Taylor
7fd2f1afe6 Change QRA66 to QRA65, on the C++ side. 2020-09-25 13:20:46 -04:00
Joe Taylor
6ebc700288 Mostly(?) changed QRA66 to QRA65 on the Fortran side. 2020-09-25 12:21:57 -04:00
Joe Taylor
2057600f43 First functioning QRA65 encode and decode. 2020-09-25 10:55:21 -04:00
Joe Taylor
0ab3e5116f Fix several flaws in the loop-over-NB logic in the FST4 decoder. 2020-09-19 10:08:42 -04:00
Joe Taylor
2af01ebaa1 Fix a flaw in the loop-over NB logic. There are more flaws! 2020-09-18 15:52:33 -04:00
Joe Taylor
f0ed93cdd0 In the NB-loop, don't cycle around a decode attempt for the npct=0 pass. 2020-09-18 11:45:28 -04:00
Joe Taylor
52bdd57e57 Implement NB=-1%, NB=-2%. Fix a startup problem with WideGraps's fMax value. 2020-09-18 11:30:23 -04:00
Joe Taylor
375a869a51 Revert "Revert "Very basic code (including some diagnostics) for "try all NB settings". Will remove it again."" 
This reverts commit 033cc65d08.
 2020-09-18 09:01:51 -04:00
Joe Taylor
033cc65d08 Revert "Very basic code (including some diagnostics) for "try all NB settings". Will remove it again." 
This reverts commit bcf7f36b9c.
 2020-09-17 19:30:07 -04:00
Joe Taylor
bcf7f36b9c Very basic code (including some diagnostics) for "try all NB settings". Will remove it again. 2020-09-17 19:28:55 -04:00
Steven Franke
7d58df4cc1 In FST4 mode with Single Decode not checked, move candidates within 20 Hz of nfqso to the top of the list. 2020-09-17 14:22:38 -05:00
Joe Taylor
21dc6a5c59 Connect the FLow and FHigh limits for FST4 decoding. 2020-09-16 17:23:59 -04:00
Steven Franke
221ede2903 Remove some unused variables. 2020-09-14 13:07:07 -05:00
Steven Franke
b49a90f530 Remove a redundant array. 2020-09-14 13:03:33 -05:00
Steven Franke
1b59d9dc8c Eliminate redundancies from the calculation of sequence correlations. 2020-09-14 12:42:32 -05:00
Steven Franke
ca0804450b Remove some redundant code. 2020-09-14 09:07:45 -05:00
Steven Franke
3d8c8e3dd7 Merge branch 'develop' of bitbucket.org:k1jt/wsjtx into develop 2020-09-14 09:00:35 -05:00
Steven Franke
98d52e35ac Speed up FST4 decoding. 2020-09-14 09:00:30 -05:00
Joe Taylor
a1baaebee9 Decoder should reject data with rms < 3.0 over first 15 seconds. 2020-09-12 13:46:09 -04:00
Joe Taylor
263675cac4 Fix an oddball result with i*2 numbers: abs(-32768)=-32768. 2020-09-12 09:00:39 -04:00
Joe Taylor
8e69f84bdd Remove some obsolete, commented-out code. No real cghanges! 2020-09-11 18:39:24 -04:00
Bill Somerville
5fdcd8c15a
Merge branch 'develop' into feat-fst280 2020-09-11 20:06:20 +01:00
Steven Franke
71fdcd1119 Silence a compiler warning. 2020-09-10 16:11:07 -05:00
Steven Franke
2dcde590df Use widegraph limits for noise baseline fit. Limit signal search to within the widegraph limits. 2020-09-10 14:58:10 -05:00
Joe Taylor
47fcddcb50 Send nfa, nfb to fst4_decode(). 2020-09-10 14:59:52 -04:00
Joe Taylor
01a1688b32 FST4 and FST4W decoder: get freq range from nfqso and ntol; remove BCD submodes, i.e. hmod=2, 4, 8. 2020-09-05 13:14:40 -04:00
Joe Taylor
f24d15b16e Eliminate the FST4/FST4W submodes with hmod > 1. 2020-09-04 15:15:30 -04:00
K9AN
f066936043
Remove an unused variable from fst4_decode 2020-08-29 19:55:23 +01:00
Steven Franke
5ca81a6507
Use 3rd order polynomial fit to estimate the noise baseline. The 
polynomial fit is done over 400 Hz bandwidth for T/R periods longer
than 15s, and over approx. 600 Hz (10 times the signal bandwidth) for
T/R period of 15s.
 2020-08-29 19:55:23 +01:00
Steven Franke
d82b9f5b0e
Speed up decoder by eliminating some complex multiples in sequence detection loop. Add timer calls for doppler spread calculation and sequence detection loop. 2020-08-29 19:55:22 +01:00
Steven Franke
ecaca6af9f
Fix argument list in call to fet_fst4_bitmetrics.f90 2020-08-29 19:55:22 +01:00
Steven Franke
b9328b96c9
Tweaks to update the diagnostics that are written to fort.21. 2020-08-29 19:55:22 +01:00
Steven Franke
e02850ae5a
Streamline fst4_decode. Add timer for downsampling. 2020-08-29 19:55:22 +01:00
Steven Franke
782c779392
Reconfigure to optimize decoder for MF/LF (high coherence) channels. 2020-08-29 19:55:21 +01:00
Steven Franke
7cb5511ed0
Simplify some code in fst4_decode.f90 - no functional change. 2020-08-29 19:55:21 +01:00
Steven Franke
bf06193c10
Add timer call for bit metric calculation. Improve some comments. Make fort.21 ntype parameter more informative. 2020-08-29 19:54:38 +01:00
Steven Franke
6838a6b484
Remove some unneeded code. 2020-08-29 19:50:32 +01:00
Steven Franke
8b7db6556c
Changes to the llrs that are used as the basis for AP decoding. 2020-08-29 19:50:17 +01:00
Steven Franke
b191e0c5ef
Fix SNR calculation for B,C,D submodes. 2020-08-29 19:49:59 +01:00
Steven Franke
9d2bde7180
Fix SNR calculation for B,C,D submodes. 2020-08-29 19:49:46 +01:00
Steven Franke
cdbe425e56
Use squared metric for fst4 - works better on fading channel. 2020-08-29 19:49:23 +01:00
Steven Franke
37e05f6074
Set unpk77_success=.false. for messages with i3=0 and n3>6. 2020-08-29 19:48:54 +01:00
K9AN
8159478d51 Remove an unused variable from fst4_decode 2020-08-28 12:25:17 -05:00
Steven Franke
e232c32178 Use 3rd order polynomial fit to estimate the noise baseline. The 
polynomial fit is done over 400 Hz bandwidth for T/R periods longer
than 15s, and over approx. 600 Hz (10 times the signal bandwidth) for
T/R period of 15s.
 2020-08-28 09:22:22 -05:00
Steven Franke
ad0540a027 Speed up decoder by eliminating some complex multiples in sequence detection loop. Add timer calls for doppler spread calculation and sequence detection loop. 2020-08-24 10:17:45 -05:00
Steven Franke
e3171d2142 Fix argument list in call to fet_fst4_bitmetrics.f90 2020-08-22 09:42:34 -05:00
Steven Franke
091d6d0b1a Tweaks to update the diagnostics that are written to fort.21. 2020-08-21 09:18:59 -05:00
Steven Franke
0e0349e87a Streamline fst4_decode. Add timer for downsampling. 2020-08-20 09:48:32 -05:00
Steven Franke
e28215fce5 Reconfigure to optimize decoder for MF/LF (high coherence) channels. 2020-08-19 14:10:28 -05:00
Steven Franke
07486ee0c7 Simplify some code in fst4_decode.f90 - no functional change. 2020-08-19 09:20:48 -05:00
Steven Franke
2c0462f9aa Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-08-17 14:12:13 -05:00
Steven Franke
683cd08103 Add timer call for bit metric calculation. Improve some comments. Make fort.21 ntype parameter more informative. 2020-08-17 14:12:08 -05:00
Bill Somerville
4a2a181528
Merge branch 'develop' into feat-fst280 2020-08-17 18:33:00 +01:00
Joe Taylor
42626009b5 TEMPORARY: Diagnostic routine for the "Save All" missing files problem. 2020-08-09 14:21:25 -04:00
Joe Taylor
84e53960cd QRA66 now works up for submodes A-D up to 300 s periods. Submode E presently NG. 2020-08-09 11:04:49 -04:00
Joe Taylor
de0476bf3c More changes to allow longer sequences in QRA66 mode. 2020-08-08 16:53:28 -04:00
Joe Taylor
e4fad77fa5 QRA66 now works with qra66sim and jt9 and TR periods 15 30 60 120 300 s. 2020-08-08 13:57:24 -04:00
Joe Taylor
bf38f4416c Modifications to give QRA64 use of longer TR periods and tone-spacing submodes. Noy yet finished, or tested! 2020-08-08 09:14:12 -04:00
Joe Taylor
2de2874672 Allow for larger irc created by message averaging. Commit test_qra66.f90 2020-08-06 14:23:39 -04:00
Joe Taylor
254e2f61fa Remove diagnostic write to fort.71. 2020-08-06 07:07:16 -04:00
Joe Taylor
30e34bf1c4 Implement message averaging (very basic) for QRA66. 2020-08-05 16:34:49 -04:00
Joe Taylor
6c8c9183aa SNR for QRA66 non-decodes now set to -25. 2020-08-05 11:16:56 -04:00
Joe Taylor
7256d70016 QRA66: change NSPS from 1920 to 1800. TxT=85*1800/12000=12.75 s. 2020-08-05 11:06:18 -04:00
Joe Taylor
f1c8f04136 Report failed QRA66 decode as SNR = -22 dB. 2020-08-04 14:18:23 -04:00
Joe Taylor
e719efd835 Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-08-04 13:44:01 -04:00
Joe Taylor
335cc41faa More code cleanup. Rename sync66a to sync66. 2020-08-04 13:13:49 -04:00
Joe Taylor
2e893e8994 Add Tx freq as command-line argument for qra66sim. 2020-08-04 13:12:51 -04:00
Steven Franke
cc0aa373a9 Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-08-04 11:56:38 -05:00
Steven Franke
9b4b3a6623 Remove some unneeded code. 2020-08-04 11:56:32 -05:00
Joe Taylor
88102af49d Fic the transfer of ntol from GUI to qra66_decode(). 2020-08-04 12:53:37 -04:00
Joe Taylor
902bb4d5e0 Add timer calls in qra66_decode. 2020-08-04 11:58:09 -04:00
Joe Taylor
4b92c20ee9 Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-08-04 11:52:51 -04:00
Joe Taylor
668631180d Code cleanup. 2020-08-04 11:52:29 -04:00
Steven Franke
4225241720 Changes to the llrs that are used as the basis for AP decoding. 2020-08-04 10:25:09 -05:00
Steven Franke
45a1a116c9 Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-08-04 10:17:16 -05:00
Steven Franke
55d83f068b Fix SNR calculation for B,C,D submodes. 2020-08-04 10:15:08 -05:00
Joe Taylor
56067dc52c Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-08-04 10:50:00 -04:00
Joe Taylor
7b2e9c4e5d Many improvements to QRA66 decoder. 2020-08-04 10:49:14 -04:00
Steven Franke
802f078386 Fix SNR calculation for B,C,D submodes. 2020-08-04 09:15:44 -05:00
Joe Taylor
c91baddb2c New sync66a subroutine for QRA66. 2020-08-03 16:30:29 -04:00
Bill Somerville
caba1fbe72
Validate grids in 77-bit and 50-bit message unpacking 2020-08-03 02:11:46 +01:00
Joe Taylor
2846a6422a Temporary: limit Rx search range to 15-- +/- 50 Hz. 2020-08-02 13:33:15 -04:00
Joe Taylor
dc5d85f850 Remove a diagnostic print. Correct the maxAP value. 2020-08-02 11:40:03 -04:00
Joe Taylor
dd471c6b5e Improvements to QRA66 decoder. Still needs work. 2020-08-02 11:15:10 -04:00
Joe Taylor
45dac5bd18 Change random number generation in qra66sim so results are exactly repeateble. 2020-08-02 09:42:22 -04:00
Bill Somerville
87dec9d433
Remove a remnant of "Also FST4W" mode 2020-08-02 00:42:09 +01:00
Joe Taylor
fb3c23492f Adjustments to the QRA66 decoder. Still need to implement looping over b90 values. 2020-08-01 15:12:37 -04:00
Joe Taylor
e66843c0c0 Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-08-01 12:14:44 -04:00
Joe Taylor
3867c452e6 Changes to GUI to accommodate QRA66. It's basically functional, I think. 2020-08-01 12:13:49 -04:00
Steven Franke
e751a4404f Use squared metric for fst4 - works better on fading channel. 2020-08-01 10:58:21 -05:00
Joe Taylor
a0b5be009a Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-08-01 10:14:26 -04:00
Joe Taylor
f45c617422 First working QRA66 decoder. 2020-08-01 09:24:59 -04:00
Joe Taylor
c4ef1e3e25 Starting on a decoder for QRA66. Now have found xdt and f0 from the sync vector. 2020-07-31 16:38:21 -04:00
Steven Franke
4b0ae524bf Set unpk77_success=.false. for messages with i3=0 and n3>6. 2020-07-31 14:15:49 -05:00
Joe Taylor
77b7e71424 Enable mode QRA66B in qra66sim. 2020-07-31 11:16:03 -04:00
Joe Taylor
09686b9958 Add a simulator for experimental mode QRA66. 2020-07-31 10:59:05 -04:00
Joe Taylor
9146ce9667 Correct a flaw in qra64sim. 2020-07-31 10:58:30 -04:00
Joe Taylor
ee24f03d09 Modify genqra64.f90 so it can also be used for a "QRA66" mode. 2020-07-31 09:27:36 -04:00
Joe Taylor
902c0b7a59 Protect against bounds error in dopspread.f90. Remove the temporary ssavg code. 2020-07-29 09:48:19 -04:00
Joe Taylor
884854223c Add computation of an average spectrum of unmodulated FST4 signals after decoding. 2020-07-27 14:02:33 -04:00
Joe Taylor
4455861773 Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-07-27 08:27:46 -04:00
Joe Taylor
79be2a7790 Reformat the fort.21 output. 2020-07-27 08:27:16 -04:00
Steven Franke
3de14a5436 Tweak SNR calibration. 2020-07-26 19:31:20 -05:00
Joe Taylor
7e24f9be20 Do not write an FFTW wisdom file if usage message has been issued. 2020-07-26 10:50:05 -04:00
Steven Franke
5eec869b2c Remove an unused file. 2020-07-23 13:22:12 -05:00
Bill Somerville
a7223a5efa
A few more cosmetic 240 -> 4 changes 2020-07-23 19:13:05 +01:00
Steven Franke
c88445ee7b One more 240->4 change in jt9,f90. 2020-07-23 12:53:49 -05:00
Steven Franke
085e63e05d Rename fst240 to fst4 in Fortran routines. 2020-07-23 12:48:50 -05:00
Joe Taylor
77a6f8f514 Move blanking from symspec() to fst240_decode(). Do not apply RefSpec corrections to data read from disk. 2020-07-23 10:58:10 -04:00
Joe Taylor
372651ae55 Add a simple execution timer for small blocks of code. 2020-07-22 10:43:33 -04:00
Steven Franke
231b518a22 Fix print format for w50 in fort.21 2020-07-21 12:42:50 -05:00
Steven Franke
bb9e1b1b90 Remove 'Also FST240W' capability from fst240_decode. 2020-07-21 12:37:26 -05:00
Bill Somerville
2da65408a8
Fix filename case issue 2020-07-20 23:53:29 +01:00
Steven Franke
d1012c9afb Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-07-20 16:09:31 -05:00
Steven Franke
a773a7ad1f Center the DT search window properly. Write fort.21 when plotspec exists. 2020-07-20 16:09:22 -05:00
Bill Somerville
7d07423a50
Repair own call hash decoding in received messages 2020-07-20 21:24:45 +01:00
Bill Somerville
22f66795a1
Improved C/Fortran string interoperation, and fix azel.dat updates 
The azel.dat file is no  longer written with future Doppler correction
information designed  for rigs  that can't do  CAT QSY  commands while
transmitting.
 2020-07-20 15:15:55 +01:00
Joe Taylor
159b8a97f7 Better handling of fSpread in mainwindow.cpp. Makes auto-seq work when plotspec is used. 2020-07-19 13:20:41 -04:00
Steven Franke
510537d4fe Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-07-18 09:02:16 -05:00
Steven Franke
98596a4be7 Choose nfft1 and ndown so that both nfft1 and nfft2 have small prime factors. 2020-07-18 09:02:11 -05:00
Bill Somerville
8b35e744d0
Increase Tx waveform storage & update wide graph nsps for FST240 2020-07-18 10:35:26 +01:00
Bill Somerville
4e0f1103b6
15 and 30 minute T/R periods for FST240 & FST240W 2020-07-17 23:44:14 +01:00
Bill Somerville
cccb38dbef
Pass hints to fst240sim, genfst240, and packjt77::pack77 on WSPR msgs 
Due to  an ambiguity with  message encodings between 77-bit  QSO modes
and 50-bit  beacon modes with message  types 13.n3 4.0 and  0.6 a hint
needs to be  passed to ensure the right encoding  is emitted. The hint
only  effects  ambiguous messages,  others  will  be encoded  strictly
according to the message content.
 2020-07-17 19:09:21 +01:00
Bill Somerville
c21a60144a
Larger 12kHz sample buffer 2020-07-17 19:08:21 +01:00
Steven Franke
322fd14a6a Use Joe's values for NSPS. 2020-07-17 11:29:21 -05:00
Steven Franke
02b66241d2 Add 15 minute and 30 minute TRperiod option for FST240. 2020-07-17 10:52:27 -05:00
Joe Taylor
7bd797c0e9 Improved estimates of Doppler spread. Comment the code in write_ref(). 2020-07-16 11:47:07 -04:00
Joe Taylor
f61cb1dcbd Better display format for w50 with plotspec. 2020-07-15 16:03:36 -04:00
Joe Taylor
b3882a93c0 Extend write_ref() to compute freq offset and Doppler spread. Also some minor code cleanup. 2020-07-15 15:50:17 -04:00
Joe Taylor
ff0d31986f File 'plotspec' in execution directory ==> save channel-gain spectrum to fort.52. 2020-07-15 13:15:38 -04:00
Bill Somerville
c5ab12d1f4
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-07-15 01:48:01 +01:00
Bill Somerville
99f419f63c
Initialize prefix store for type 2 50-bit messages 2020-07-15 01:46:52 +01:00
Joe Taylor
ab3630b2e7 Compute spectrum for measuring fspread of a decoded FST240/FST240W signal. 2020-07-14 16:46:28 -04:00
Joe Taylor
c925f6d1cc Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-07-14 11:43:40 -04:00
Joe Taylor
cbeb81b499 Add LF/MF noise blanker capability for FST240 and FST240W. 2020-07-14 11:27:41 -04:00
Steven Franke
c5f0187036 Eliminate an unnecessary variable (NN2) in fst240sim.f90. 2020-07-13 19:59:14 -05:00
Steven Franke
a19d5d1556 Fix end subroutine line for new write_ref subroutine. 2020-07-13 15:10:01 -05:00
Steven Franke
db3e0d8022 Add a disabled option to print the reference waveform to fort.51. 2020-07-13 14:58:50 -05:00
Steven Franke
bac3cc7471 Remove spurious invocation of thresh variable. 2020-07-13 08:53:11 -05:00
Steven Franke
4cb902a4cc Try to get c_bigfft sorted out. 2020-07-11 16:39:31 -05:00
Joe Taylor
5b804d90a3 Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-07-11 15:25:37 -04:00
Joe Taylor
3e61688229 Fix the nagging 'KA1R' problem with decoding after change in TRperiod. 2020-07-11 15:24:21 -04:00
Steven Franke
8998537622 Clean up a couple of loose ends. 2020-07-09 15:30:46 -05:00
Steven Franke
a47f34db92 Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-07-09 14:13:31 -05:00
Steven Franke
8941b70a2a Changes to improve sensitivity on overspread channels. 2020-07-09 14:13:23 -05:00
Joe Taylor
114cd83376 Signal report range has been [-30,+99]. Not it is [-50,+50], in a backward-compatible way. 2020-07-08 11:25:07 -04:00
Bill Somerville
aa557820d4
Work around gfortran v10 error message 2020-07-08 02:25:25 +01:00
Bill Somerville
61a72e9d91
Merge branch 'develop' into feat-fst280 2020-07-06 23:44:00 +01:00
K9AN
d17bc2f97f Comment out debug prints. 2020-07-04 13:06:50 -05:00
Steven Franke
3fe6fa3d72 Rough first attempt at setting minsync according to setup. 2020-07-04 12:57:51 -05:00
Steven Franke
0357af2eb5 Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-07-04 09:16:01 -05:00
Steven Franke
c176572ec0 Add options for sub-symbol integration for sync and symbol estimation. 2020-07-04 09:15:57 -05:00
Joe Taylor
4a0b7b3a1d Fix the "FST240W Type 2" and "FST240W Type 3" messages. 2020-07-03 12:01:26 -04:00
Steven Franke
7fb7e51283 Use N=1,2,3,4 for now. 2020-07-02 14:48:11 -05:00
Joe Taylor
352b497399 Remove a diagnostic print. 2020-07-02 13:43:50 -04:00
Joe Taylor
185cf3eb48 "Also FST240W" should set iwspr=2, not 1. Change ndeep to ndepth, for consistency. 2020-07-02 13:30:18 -04:00
Steven Franke
3f1fd6e2c1 Tweaks to decrease the number of garbage candidates slightly. 2020-07-02 11:54:10 -05:00
Steven Franke
6d0d21670e Change noise_bw to xnoise_bw so that it is real. 2020-07-02 08:45:37 -05:00
Steven Franke
e74595fdd5 Discard the all-zero codeword. 2020-07-01 16:42:22 -05:00
Steven Franke
6ebb487cd5 Remove residual WSPR_LF that was causing build errors. Build ldpcsim240_74. 2020-07-01 14:40:37 -05:00
Joe Taylor
94f5e2925c Correct the length of id2 sent to decoder for FST240W mode. 2020-07-01 15:04:15 -04:00
Joe Taylor
f2c3cbf9ac Implement basic functiionality of FST240W in the GUI. 2020-07-01 12:01:47 -04:00
Steven Franke
0f04f3285a Prevent decodes that fail to unpack from being printed. 2020-07-01 08:20:38 -05:00
Joe Taylor
22b782a4ae Can now decode FST240W signals from WSJT-X, using FST240 and the option "Decode -> Also FST240W". 2020-06-30 20:04:44 -04:00
Steven Franke
f6a8a179dc Hardwire for 50-bit messages. 2020-06-30 18:15:35 -05:00
Joe Taylor
361c1a96c1 Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280 2020-06-30 17:23:58 -04:00
Joe Taylor
ae54c80a54 Here's a start on GUI changes to support FST240W as well as FST240. 2020-06-30 17:14:58 -04:00
Steven Franke
5336d959c7 Remove temporary stuff. 2020-06-30 16:06:53 -05:00
Steven Franke
a8b87f1f3a Fix wspr-mode SNR. 2020-06-30 16:05:52 -05:00
Steven Franke
7345e13661 Fix a bug 2020-06-30 15:50:50 -05:00