Joe Taylor
077811ae6d
Update q65params.f90.
2020-12-05 11:03:16 -05:00
Joe Taylor
6416777278
Set ':' as the "mode character" for Q65.
2020-12-04 15:55:03 -05:00
Joe Taylor
8b9b71c894
Fix the "off by one" issue in measuring f0 for list decodes.
2020-12-04 15:37:54 -05:00
Joe Taylor
3dd34e13ba
dd "MyCall DxCall DxGrid" to list. Set PLOG_MIN=-240. No list decoding if DxCall is not defined.
2020-12-04 15:29:46 -05:00
Joe Taylor
7500adce8b
Allow "@1500", etc., single-tone transmissions in Q65 mode.
2020-12-04 14:53:45 -05:00
Bill Somerville
538d0eedd5
Change to wide character logging and handle wide character file paths
2020-12-04 19:01:05 +00:00
Bill Somerville
f3a2c653aa
Revert to default o/s or Qt Tx audio buffer sizes
2020-12-04 18:59:41 +00:00
Joe Taylor
aaf832cbd2
Revert "Threshold in q65_sync.f90 increased to -250 only for reports. Assumes that the list is in the order defined in q65_set_list.f90 (reports are at indexes 5..56). Beware if q65_set_list is changed!!!"
...
This reverts commit bb08150e4b
2020-12-04 12:56:45 -05:00
Joe Taylor
978ea0f3b5
Revert "forgot to uncomment fort.55 output. corrected"
...
This reverts commit 72bc2572e6
2020-12-04 12:56:23 -05:00
Nico Palermo/IV3NWV
72bc2572e6
forgot to uncomment fort.55 output. corrected
2020-12-04 10:07:56 +01:00
Nico Palermo/IV3NWV
bb08150e4b
Threshold in q65_sync.f90 increased to -250 only for reports. Assumes that the list is in the order defined in q65_set_list.f90 (reports are at indexes 5..56). Beware if q65_set_list is changed!!!
2020-12-04 09:43:41 +01:00
Bill Somerville
9fed3534d8
Updated Japanese UI translation, tnx Oba san, JA7UDE
2020-12-03 23:39:44 +00:00
Joe Taylor
53e4052b8c
Q65 additions for diagnostic purposes.
2020-12-03 14:28:30 -05:00
Bill Somerville
93cf8a1b58
Updated WSJT-X Danish UI translation, tnx Michael, 5P1KZX
2020-12-03 19:19:47 +00:00
Bill Somerville
ad8c33bee7
Try not setting low-latency audio category
2020-12-03 14:31:46 +00:00
Bill Somerville
ac6a6d0cd7
Fail wsprd if data directory specified not accessible
...
Also fixed trivial memory leak on error exit.
2020-12-03 13:12:12 +00:00
Bill Somerville
3134dd8a60
Removed incorrect pointer declaration, tnx to Rud, K5RUD
2020-12-03 12:20:14 +00:00
Bill Somerville
5b10479cb4
Updated Chinese and Hong Kong UI translations, tnx Sze-to, VR2UPU
2020-12-03 11:56:50 +00:00
Bill Somerville
0b2a9c1953
Updated Spanish UI translation, tnx Cédric, EA4AC
2020-12-03 11:56:01 +00:00
Bill Somerville
88f18e7528
Updated Catalan UI translation, tnx Xavi, EA3W.
2020-12-03 11:55:21 +00:00
Bill Somerville
50d0543c03
Test version with environment variable to set Tx audio buffer size
...
WSJT_TX_AUDIO_BUFFER_FRAMES takes the following values:
-1 - use Qt/system default
0 - use 200 mS (WSJT-X default)
+ve integer - value is number of frames at 48 kHz
-1 is likely to be a good choice on Windows and may macOS. 0 has
proven to be good on Windows. On Linux 0 may be OK but we need to try
other values.
The value is only a hint, the actual value used along with the period
size (the size of each chunk of samples requested by the system) is
printed in an info level diagnostic message at the start of each
transmission.
2020-12-03 01:49:21 +00:00
Bill Somerville
94f0af72e3
Command line tool prints WSJT-X version to console, tnx Dave, W3DJS
2020-12-02 01:57:32 +00:00
Bill Somerville
917e87cee5
Handle Qt logging category when redirecting to SYSLOG channel
2020-12-02 00:40:37 +00:00
Bill Somerville
5f85dfac61
Looking for a Tx audio buffer size that works on macOS.
2020-12-01 21:24:41 +00:00
Bill Somerville
041c6b68fe
Reduce non-Windows Tx audio buffer size
2020-12-01 21:05:01 +00:00
Bill Somerville
6214cc9835
Use same user defined audio out buffer sizes on all platforms
2020-12-01 20:55:10 +00:00
Joe Taylor
d1ac5f71e2
Remove several diagnostic writes.
2020-12-01 11:31:52 -05:00
Joe Taylor
df3169ba22
Update test_q65.
2020-12-01 11:24:21 -05:00
Joe Taylor
6b540aaad0
Correct offset in (i,j) indices for selecting s3 from s1.
2020-12-01 11:23:35 -05:00
Bill Somerville
7f1a537e6e
Fix up versioning after merge from release branch
2020-12-01 16:06:56 +00:00
Bill Somerville
6efdf28489
Merge branch 'release-2.3.0' into develop
2020-12-01 15:48:10 +00:00
Bill Somerville
4492d8e977
Add tool-tip for "Best S+P" push-button
2020-12-01 15:47:07 +00:00
Bill Somerville
2db2884c39
Fix regression with selecting a working frequency when changing mode
2020-12-01 15:11:36 +00:00
Nico Palermo/IV3NWV
70e0a84fe8
corrected a compile error. q65_llh declared as an external variable in q65.h and placed in q65.c
2020-12-01 04:13:30 +01:00
Nico Palermo/IV3NWV
68d964b5c7
merged Joe's changes in decode_fullaplist
2020-12-01 03:41:23 +01:00
Nico Palermo/IV3NWV
baf427c358
Merge branch 'feat-fst280' of bitbucket.org:k1jt/wsjtx into feat-fst280
2020-12-01 03:26:37 +01:00
Nico Palermo/IV3NWV
5a3dd69331
decode_fullaplist updated. the decoding threshold is now adjusted in function of the number of codewords passed
2020-12-01 03:26:00 +01:00
Joe Taylor
a03758e490
Add a file that was missing.
2020-11-30 17:44:33 -05:00
Joe Taylor
65dda491d2
More Q65 code cleanup. Make submodes higher than A work with List Decoding.
2020-11-30 15:20:19 -05:00
Joe Taylor
7cb87e315b
Fix a format.
2020-11-30 14:15:59 -05:00
Joe Taylor
adc4c3d78a
More Q65 cleanup. Single-digit at end of line.
2020-11-30 14:13:37 -05:00
Joe Taylor
5c947178ce
Protect against a bounds error.
2020-11-30 13:26:14 -05:00
Joe Taylor
de6f5e4975
Q65 code cleanup. Use 3-digit format for the end-of-line flag.
2020-11-30 13:14:18 -05:00
Joe Taylor
8285fd28a8
List decoding now supports 57 list messages.
2020-11-30 11:41:50 -05:00
Joe Taylor
afc4f2fb54
Reorganize things in q65_sync.
2020-11-30 10:45:52 -05:00
Joe Taylor
9ff6f5b4d3
Temporary save, much work in progress.
2020-11-30 09:52:47 -05:00
Bill Somerville
d186f7b14e
Repair regression in message_aggregator decode filtering by client
2020-11-30 02:13:16 +00:00
Joe Taylor
64516e6abb
Still testing various parts of the Q65 decoding chain.
2020-11-29 10:00:33 -05:00
Bill Somerville
48cb207cd3
Bump RC number
2020-11-29 13:08:35 +00:00
Joe Taylor
f0a1694816
Minor code cleanup.
2020-11-28 10:12:12 -05:00
