f4exb
f6bc9daf8e
UpChannelizer: pass baseband sample rate in notification message
2017-08-06 17:10:29 +02:00
f4exb
d0f718d982
Audio: info message if format is OK
2017-08-06 02:26:34 +02:00
f4exb
8a5668a186
SSB demod: clamp AGC value
2017-08-06 00:02:16 +02:00
f4exb
428d22579d
SSB modulator: added compression (AGC) volume order control
2017-08-05 23:11:05 +02:00
f4exb
d8f7dcebdc
SSM modulator: added audio compressor
2017-08-05 19:08:33 +02:00
f4exb
0f9c8d17a5
Bumoed version to 3.5.4
2017-08-04 18:10:00 +02:00
f4exb
38318577de
Put smootherstep function code in one place
2017-07-27 11:24:01 +02:00
f4exb
ca8cad26c5
Removed MagSquaredAGC class and added use squared value (power) as an option to MagAGC because apart from that the code was entirely the same
2017-07-27 10:56:59 +02:00
f4exb
86e52928d9
SSB demod: remove AGC threshold (squelch) completely if level us fully turned down (-99 dB)
2017-07-27 10:50:41 +02:00
f4exb
7acc42436a
SSB demod: exchange up and down step counter values when the threshold state changes to avoid restarting from 0 or step length when state changes rapidly
2017-07-26 17:50:17 +02:00
f4exb
e17a815125
SSB demod: AGC threshold step up/down optimization
2017-07-26 16:23:34 +02:00
f4exb
432ab7d834
SSB demod: fixed step up/down factor calculation (float)
2017-07-26 15:55:25 +02:00
f4exb
a815507f77
SSB demod: set AGC threshold step up and down maximum time to 100ms
2017-07-26 13:36:18 +02:00
f4exb
da6b60d48c
SSB demod: AGC step down
2017-07-26 08:39:20 +02:00
f4exb
9ec4e6de98
SSB demod: improve AGC threshold handling
2017-07-25 23:39:27 +02:00
f4exb
2597883015
SSB demod: updated AGC
2017-07-25 21:21:48 +02:00
f4exb
94704ab7b2
SSB demod: implemented basic AGC not optional
2017-07-25 00:58:16 +02:00
f4exb
303cb1f3c3
bumped version to 3.5.2
2017-07-22 04:50:38 +02:00
f4exb
de74f27c9a
SSB demod: show LSB and DSB values appropriately
2017-07-22 04:23:10 +02:00
f4exb
5dac0b6712
HackRF input: link Tx frequency button and setting
2017-07-20 23:34:12 +02:00
f4exb
37df628719
The first device (R0) is always a buddy leader
2017-07-03 23:22:45 +02:00
f4exb
8da0464a54
Implemented buddy leader logic
2017-07-03 08:59:48 +02:00
f4exb
160307fe23
ValueDialZ: added missing inter-wheel gap
2017-07-01 23:16:29 +02:00
f4exb
3a24158743
Bumped to version 3.5.1
2017-06-27 05:53:09 +02:00
f4exb
604273742a
AF squelch: reset after setting threshold. Removed NFM demod deferred init
2017-06-06 02:16:28 +02:00
f4exb
91021678b2
NFM Demod: try a deferred init to cure AF squelch init problem
2017-06-06 01:53:52 +02:00
f4exb
9a8cc15d8f
NFM demod and AF squelch: fixed initialization and reset at each squelch change
2017-05-31 23:36:02 +02:00
f4exb
db1a620fc2
Attempt to fix AF squelch
2017-05-31 00:30:00 +02:00
f4exb
c8bd0e8e85
AF squelch: try to fix max = 0 state
2017-05-30 20:31:15 +02:00
f4exb
2ae702763b
Fixed critical compiler warnings in Windows
2017-05-26 10:35:29 +02:00
f4exb
3a3d8e3dcb
activated compiler warnings
2017-05-25 20:13:34 +02:00
f4exb
bf9ce302f3
Rearrange dock widgets so device interface is on the top and presets are on the bottom
2017-05-19 00:14:40 +02:00
f4exb
8abaf69dde
Fixed code typo preventing remove last device to work correctly
2017-05-18 23:01:45 +02:00
f4exb
c434b2e24e
Fixed re-enumeration of static devices
2017-05-18 22:54:24 +02:00
f4exb
d842b44c28
Value dials: implement Ctl to shift digits by 2. Updated documentation
2017-05-18 01:48:52 +02:00
f4exb
58fb967ca7
ValueDialZ: use sign wheel to reverse sign using keys
2017-05-17 22:32:03 +02:00
f4exb
a0a8548c7b
ValueDialZ: use sign wheel to reverse sign
2017-05-17 22:24:58 +02:00
f4exb
b0a765d67a
ValueDialZ: fixed digit selection overlay
2017-05-17 21:41:57 +02:00
f4exb
e317f3762c
ValueDialZ: new value dial that handles negative values. Application in TCPsrc plugin
2017-05-17 19:36:36 +02:00
f4exb
93d1a5bae7
Value dial: improved sunken perspective
2017-05-17 00:19:21 +02:00
f4exb
30696762df
Put level meter in sunken perspective
2017-05-17 00:13:40 +02:00
f4exb
579c05cfe5
Use doubles for all power calculations
2017-05-16 23:39:49 +02:00
f4exb
dafad384c8
Merged Sigysmund changes for Mac OS Sierra on v3.4.5
2017-05-16 23:01:44 +02:00
f4exb
396baa22c8
New value dial color schemes: new yellow color scheme for filters. Use it in LimeSDR plugins
2017-05-16 21:24:25 +02:00
f4exb
1bcb38038a
New value dial color schemes: make the background a little bit darker and mark an embossed border
2017-05-16 20:21:32 +02:00
f4exb
d3a22638e4
New value dial color schemes: make the alpha overlay of the digit highlight a bit thinner
2017-05-16 18:52:53 +02:00
f4exb
007ea19e36
Bumped version to 3.5.0
2017-05-16 18:38:39 +02:00
f4exb
6f9ef0eaf9
New value dial color schemes: propagate to all active plugins
2017-05-16 18:27:36 +02:00
f4exb
7c33fa51e5
New value dial color schemes: changed inter-wheel gap color
2017-05-16 18:16:23 +02:00
f4exb
747f400a78
New value dial color schemes. apply to File and AM demod plugins
2017-05-16 16:21:59 +02:00
f4exb
b01d41c55b
AF Squelch: use unsigned integers
2017-05-16 15:36:30 +02:00
f4exb
da868edb68
New value dial color schemes
2017-05-16 09:07:58 +02:00
ZigaS
27aab58d92
MacOS(sierra) development environment.
...
Updated qmake project configs.
Deploy & Run script.
For now only hardware supported is HackRF.
2017-05-15 12:32:16 +02:00
f4exb
e4d3f7eba7
AF squelch
2017-05-13 16:05:47 +02:00
f4exb
7430dee09a
AF squelch
2017-05-13 16:01:41 +02:00
f4exb
efb52beb09
AF squelch init sequence review
2017-05-13 15:07:56 +02:00
f4exb
f57eecee86
NFM demod: af squeelch optimization
2017-05-13 12:10:03 +02:00
f4exb
a39b102f89
NFM demod: fixed AF squelch initialization
2017-05-12 23:10:54 +02:00
f4exb
6b4ba98e8e
AM demod: fill AGC average with ones when passing squelch threshold to avoid abrupt start at squelch opening
2017-05-12 16:38:58 +02:00
f4exb
74f65fcbdc
NFM Demod: AF squelch crap
2017-05-12 14:41:27 +02:00
f4exb
3cd754bd67
Fixed down channelizer by dividing by 2 at each filter stage
2017-05-12 02:41:51 +02:00
f4exb
55099c73c5
AGC and SimpleAGC: Use double for moving average storage type
2017-05-11 23:40:31 +02:00
f4exb
59ee73e979
Bumped to version 3.4.5
2017-05-11 19:28:56 +02:00
f4exb
9fcc3cd426
Remved default constuctors in Moving average and AGC classes
2017-05-11 18:39:00 +02:00
f4exb
54eb56977d
Multi source scope: dormant code
2017-05-10 22:36:19 +02:00
f4exb
529d627019
Bumped version to 3.4.4
2017-05-08 17:36:32 +02:00
f4exb
b232a21e2c
Bumped to version 3.4.3
2017-05-07 14:36:18 +02:00
f4exb
0e70c84f45
DSD demod: added possibility to enable/disable the symbol PLL
2017-05-07 10:23:37 +02:00
f4exb
15443fb72d
DSD decoder: updated to get symbol PLL lock status. Bumped to version 3.4.2
2017-05-06 00:29:58 +02:00
f4exb
cf267b1254
Code warnings in Eclipse cleanup
2017-05-05 10:40:45 +02:00
f4exb
3fff41ce70
cppcheck fixes
2017-05-05 09:30:45 +02:00
f4exb
6df387081f
MainWindow: dos2unix
2017-04-26 18:44:03 +02:00
f4exb
4818e629de
Bumped version to 3.4.1
2017-04-26 18:43:13 +02:00
f4exb
137647e2ca
IntHalfbandFilters: set workInterpolateLowerHalf and UpperHalf optimized methods as defaults
2017-04-26 02:20:07 +02:00
f4exb
172de27047
IntHalfbandFilters: set workInterpolateCenter optimized methods as defaults
2017-04-26 01:57:11 +02:00
f4exb
cd7e4e4385
IntHalfbandFilters: set myInterpolate optimized methods as defaults
2017-04-26 01:39:45 +02:00
f4exb
a60e2b7597
IntHalfbandFilterEO1: Optimized versions of workInterpolateCenter and myInterpolate
2017-04-26 01:34:27 +02:00
f4exb
822fff3aac
IntHalfbandFilterDB: Optimized versions of workInterpolateCenter and myInterpolate
2017-04-26 00:22:27 +02:00
f4exb
6b3bdef3a7
IntHalfbandFilters: Optimized versions of workInterpolateCenter and myInterpolate
2017-04-26 00:07:57 +02:00
f4exb
02981b4f08
CW Keyer: specifiy char signedness to fix error with some compilers
2017-04-25 00:16:44 +02:00
f4exb
e0b7027756
LimeSDR input: added antenna selection
2017-04-23 16:23:01 +02:00
f4exb
196172a1df
PluginManager: dos2unix
2017-04-23 10:33:18 +02:00
f4exb
851461b8f3
PluginManager::selectSampleSourceByIndex set device details (incl serial) before trying to open the device so it can work...
2017-04-23 10:32:15 +02:00
f4exb
db67e07ab9
LimeSDR input: implemented basic stream reporting
2017-04-19 18:41:55 +02:00
f4exb
e374dd234e
Value dial: do not print leading decimal point
2017-04-18 01:50:58 +02:00
f4exb
414a7ccd87
Refactoring: removed device parameter from all start() methods in sample sink plugins
2017-04-14 03:44:49 +02:00
f4exb
b8623c90ce
Refactoring: removed device parameter from all start() methods in sample source plugins
2017-04-14 03:40:45 +02:00
f4exb
3ab855c927
Sample sink plugins: removed useless init pure virtual method
2017-04-12 23:26:40 +02:00
f4exb
2136dc7672
Sample source plugins: removed useless init pure virtual method
2017-04-12 23:10:22 +02:00
f4exb
729ba1b1f9
Sink handling refactoring: re-organize new source selection steps between main window and plugin manager
2017-04-12 22:46:16 +02:00
f4exb
39ca753dff
Source handling refactoring: re-organize new source selection steps between main window and plugin manager
2017-04-12 22:12:34 +02:00
f4exb
8203b7ded9
Source handling refactoring (1)
2017-04-12 18:59:26 +02:00
f4exb
982b3c3072
Bumped version to 3.3.4
2017-04-10 22:31:15 +02:00
f4exb
813d79a115
HackRF input: continuous sample rate setting
2017-04-01 13:08:41 +02:00
f4exb
016f7c1e37
ATV Demod: FM mode using phaseDiscriminatorDelta with deviation scaling
2017-03-22 23:55:47 +01:00
f4exb
af512f16f8
ScopeNG: add possibility to drive the GUI from a parent class
2017-03-21 11:24:03 +01:00
f4exb
63510968b5
ATV Modulator: implemented 405 lines standard and added display of channel sample rate
2017-03-20 03:35:27 +01:00
f4exb
b677138b45
ATV plugins: Windows build updates
2017-03-19 20:18:44 +01:00
f4exb
303fd3ccc7
ATV Demod: implemented BFU with PLL for single sideband modes
2017-03-19 10:28:54 +01:00
f4exb
c3c6b79de4
ATV Demod: implement NCO and interpolator change
2017-03-18 00:11:48 +01:00
f4exb
2018607944
Corrected spectrum channels display: removed frequency scale central line when the channel is not selected
2017-03-17 14:13:09 +01:00
f4exb
701c853cff
ATV Demod: GUI: new RF settings layout
2017-03-16 18:00:18 +01:00
f4exb
cfec4d1be9
Simplify channel marker underline on frequency scale
2017-03-16 15:19:45 +01:00
f4exb
836c3a56da
ATV Modulator: use consistent opposite sideband bandwidth
2017-03-16 12:01:46 +01:00
f4exb
b76c246bcd
ATV Modulator: vestigial sidebands chammel marker update (color overlay)
2017-03-16 11:49:14 +01:00
f4exb
b079fae843
ATV Modulator: use assymetrical filter for vestigial sideband modulation
2017-03-16 10:11:03 +01:00
f4exb
df88215798
ATV Modulator: implemented vestigial sideband
2017-03-16 02:45:51 +01:00
f4exb
76a0dc3e2d
Fixed a long lasting bug where channels are movable from the spectrum display based on the color (blue) so that WFM could not move. Set a dedicared boolean instead
2017-03-16 00:39:49 +01:00
f4exb
f40d030e2e
FFT filter: SSB filter leave DC component by default in both USB and LSB. Option to remove DC in both
2017-03-15 15:37:51 +01:00
f4exb
abd463d374
ATV Modulator: SSB support in GUI
2017-03-15 05:05:42 +01:00
f4exb
41fac50526
ATV Modulator: added camera details to the GUI
2017-03-11 06:57:22 +01:00
f4exb
806b955110
ATV Modulator: added image file dialog
2017-03-08 01:35:18 +01:00
f4exb
2318419716
NFM demod: new discriminator and optional FM deviatoin based squelch
2017-03-05 06:22:05 +01:00
f4exb
54afdb2b26
New channel analyzer and scope: (dummy) dial button for source port select and screenshots for future readme
2017-03-02 00:15:00 +01:00
f4exb
5dfe2a7a2a
Channel Analyzer NG: handle rational downsampler in the GUI
2017-03-01 05:37:37 +01:00
f4exb
d2727708e9
Channel Analyzer NG: revamped UI with rational downsampler UI
2017-02-28 00:58:26 +01:00
f4exb
4ee7675dd9
Added missing resources
2017-02-27 01:17:24 +01:00
f4exb
bc2d0f3743
New scope: removed Z trace stuff
2017-02-27 01:11:12 +01:00
f4exb
68b28fc648
New scope: implemented view trace toggle
2017-02-26 22:27:03 +01:00
f4exb
3bf3e4e737
New scope: implement multiple Y traces
2017-02-26 20:14:54 +01:00
f4exb
d9a5bcfc7a
Load preset sequence: load source or sink before channels
2017-02-26 19:40:19 +01:00
f4exb
3078b6cfa1
New scope: implemented trigger moves
2017-02-26 19:14:27 +01:00
f4exb
ed2fc4bbe8
New scope: corrected channel overlay vertical placement
2017-02-26 11:50:06 +01:00
f4exb
5bee287360
New scope: implemented trace moves
2017-02-26 11:26:23 +01:00
f4exb
14d5b5e913
New scope: trace overlay implemented on all displays
2017-02-26 09:25:55 +01:00
f4exb
82d55764a9
New scope: changed channel overlay font and set it to trace color
2017-02-26 06:06:59 +01:00
f4exb
ede5990191
New scope: mag (dB) power overlay considering time base and time offset
2017-02-26 05:26:42 +01:00
f4exb
9a48e8b090
New scope: set a reference to trace count for better code clarity
2017-02-26 05:13:21 +01:00
f4exb
b3cb4d3f70
New scope: pass time base to ScopeVis
2017-02-26 04:55:15 +01:00
f4exb
6c60189fdc
New scope: mag (dB) power overlay on XY polar trace - basic
2017-02-26 04:46:02 +01:00
f4exb
46ebdefff0
NCO: standardized debug message
2017-02-25 11:32:18 +01:00
f4exb
864df4d232
Mew scope: moved Z trace checkbox side
2017-02-25 04:47:39 +01:00
f4exb
301e491cd4
Mew scope: fixed polar time offset
2017-02-25 04:45:30 +01:00
f4exb
aa47e0fb94
Mew scope: trace memory: process scope updates
2017-02-25 04:35:06 +01:00
f4exb
86279bb1ee
Mew scope: trace memory
2017-02-24 23:24:47 +01:00
f4exb
f86d11e2d1
Mew scope: trace memory interim state (2)
2017-02-24 08:31:25 +01:00
f4exb
763d486514
Mew scope: trace memory interim state (1)
2017-02-23 08:18:03 +01:00
f4exb
a0c3ffe5da
New scope: UI cosmetic changes
2017-02-22 02:52:38 +01:00
f4exb
6bf430bc56
New scope: pre trigger delay slider mouse roll does x1
2017-02-22 01:48:11 +01:00
f4exb
d310d59142
New scope: one shot trigger support
2017-02-22 01:18:50 +01:00
f4exb
07078fa913
New scope: set trace length display to two decimals precision
2017-02-21 06:11:58 +01:00
f4exb
946d1cf68a
New scope: deserialize triggers
2017-02-20 23:58:03 +01:00
f4exb
f9ba5696c5
New scope: deserialize traces
2017-02-20 22:19:50 +01:00
f4exb
f5aff6b34f
New scope: serializer and deserializer for first line of UI
2017-02-20 01:21:52 +01:00
f4exb
daa2619bb3
New scope: activate trace cache
2017-02-19 04:46:15 +01:00
f4exb
06dc97c91c
New scope: implemented trace delay
2017-02-17 01:54:55 +01:00
f4exb
eaffa127b8
New scope: cache mechanism for projectors
2017-02-16 19:09:16 +01:00
f4exb
5584fec183
New scope: simplified display trace allocation and fixed segfault
2017-02-16 01:06:15 +01:00
f4exb
01ee19a46b
New scope: polar display: optimize space
2017-02-15 02:57:32 +01:00
f4exb
93871e8fb2
New scope: polar display: optimization
2017-02-15 02:52:52 +01:00
f4exb
534b2ed0cf
New scope: polar display
2017-02-15 02:45:18 +01:00
f4exb
8c0f4681f5
New scope: polar display right side contour grid and scales
2017-02-15 02:20:28 +01:00
f4exb
6b9e92c84e
New scope: polar display left side (X and Y overlay)
2017-02-15 02:02:28 +01:00
f4exb
78d943bf61
New scope: refactor display arrangement methods: horizontally stacked displays
2017-02-15 01:07:19 +01:00
f4exb
3c1abfc152
New scope: refactor display arrangement methods: vertically stacked displays
2017-02-15 00:46:45 +01:00
f4exb
912259a0ad
New scope: refactor display arrangement methods: unique displays
2017-02-15 00:20:53 +01:00
f4exb
f719ced17f
Device source engine: initialize sample rate and center frequency in the sink when adding a threaded sample sink
2017-02-14 21:46:35 +01:00
f4exb
4961594f50
New scope: fixed currently displayed trace not updated after trace delete
2017-02-13 23:57:12 +01:00
f4exb
39ed424081
New scope: replaced virtual projectors by a single concrete projector with switch/case
2017-02-13 22:52:42 +01:00
f4exb
10dc1c886c
New scope: de-activate displays that are not implemented yet
2017-02-13 18:55:24 +01:00
f4exb
5a05bdcb1a
New scope: use configuration mutex also for trigger operations
2017-02-13 11:30:40 +01:00
f4exb
5b61e526d9
New scope: fixed Y display only scale display
2017-02-13 08:41:53 +01:00
f4exb
29673fe26c
New scope: restrict to two traces (X and Y) via the GUI
2017-02-13 03:34:17 +01:00
f4exb
acba573ce7
New scope: add/delete traces interim state (2) improved stability
2017-02-13 03:23:29 +01:00
f4exb
77072ec967
New scope: add/delete traces interim state (1)
2017-02-13 01:32:02 +01:00
f4exb
710e2b931d
New scope: compute trace in ScopeVis only when required by GLScope. Fixed trace and trigger color dialogs
2017-02-13 00:17:59 +01:00
f4exb
e32659b86a
New scope: added change trigger color feature
2017-02-12 02:12:06 +01:00
f4exb
2820efe26b
New scope: added change trace color feature
2017-02-11 20:44:00 +01:00
f4exb
804497c282
New scope: use finer delay division (base trace length / 100)
2017-02-11 12:07:07 +01:00
f4exb
c8aa0dc4b8
New scope: focused trigger change
2017-02-11 10:36:10 +01:00
f4exb
76cdb94d34
New scope: corrected trigger display levels
2017-02-11 08:35:33 +01:00
f4exb
0672121044
New scope: remove previous commit
2017-02-10 22:23:04 +01:00
f4exb
fa47e7064f
New scope: Trigger line display interim state (1)
2017-02-10 18:28:19 +01:00
f4exb
ec604c21c9
New scope: fixed trigger UI add, remove and change current
2017-02-10 04:35:08 +01:00
f4exb
f1b5b08fa0
New scope: fixed trigger projector initialization and delete
2017-02-10 02:45:49 +01:00
f4exb
b8e3d60110
New scope: fixed and enhance trigger delay
2017-02-09 22:22:56 +01:00
f4exb
1f37bcf3de
New scope: added trigger delay, mutiple occurences and chained triggers features
2017-02-09 18:45:06 +01:00
f4exb
c56f852a85
New scope: added trace and trigger number display methods
2017-02-09 18:44:20 +01:00
f4exb
d74e7d87d7
New scope: simplify triggerPoint calculation
2017-02-09 02:16:43 +01:00
f4exb
758bc9a5dd
New scope: use global number of samples to decide the end of a trace. Fixed triggerPoint calculation
2017-02-09 01:58:54 +01:00
f4exb
a64fb01119
New scope: separate trace delay and pre-trigger trace processes
2017-02-09 00:18:28 +01:00
f4exb
aed77d60a8
New scope: refactored processTraces prototype
2017-02-09 00:11:10 +01:00
f4exb
93143b0cbd
New scope: review trace outer process
2017-02-09 00:04:19 +01:00
f4exb
e3b933350c
New scope: review freerun / trigger processing
2017-02-09 00:00:21 +01:00
f4exb
f2b04539cf
New scope: ensure only a trace length of samples is processed at a time
2017-02-08 22:22:27 +01:00
f4exb
66b584d264
New scope: change float to double for values displays in the UI
2017-02-08 22:09:24 +01:00
f4exb
897a181028
New scope: fixed trace display and triggers
2017-02-08 02:13:53 +01:00
f4exb
199e915c62
New scope: fix trigger (2)
2017-02-07 18:50:08 +01:00
f4exb
ba67483b48
New scope: fix trigger (1)
2017-02-07 07:45:42 +01:00
f4exb
e17ecf0328
New scope: fixed trace offset
2017-02-07 00:25:40 +01:00
f4exb
27116d5b3f
New Scope: trigger implementation interim state (1)
2017-02-06 18:40:15 +01:00
f4exb
4d36eeb4c7
New scope: basic single X display
2017-02-06 02:40:31 +01:00
f4exb
0f5c055eca
New scope: interim state (8)
2017-02-05 13:26:07 +01:00
f4exb
44e764f492
New scope: interim state (7)
2017-02-05 04:41:32 +01:00
f4exb
fcfa6e7b3f
New scope: interim state (6)
2017-02-03 08:27:03 +01:00
f4exb
1db62fd347
New scope: interim state (5)
2017-02-02 18:18:37 +01:00
f4exb
a7bb81c70a
New scope: interim state (4)
2017-02-02 08:27:49 +01:00
f4exb
e6f80c8474
New scope: interim state (3)
2017-02-01 18:31:16 +01:00
f4exb
ce41ded86e
New scope: interim state (2)
2017-01-31 08:26:13 +01:00
f4exb
0861f71ff3
NFM demod: new discriminator
2017-01-30 23:28:06 +01:00
f4exb
2f515d9379
New scope: Windows build adjustments
2017-01-30 02:22:18 +01:00
f4exb
a36870f958
New scope: methods to create/change/delete traces and triggers
2017-01-30 00:36:27 +01:00
f4exb
cce5b29aa6
New scope: make some trace and trigger data public
2017-01-30 00:07:20 +01:00
f4exb
d69c6cc417
New scope: pass sample rate
2017-01-29 22:52:38 +01:00
f4exb
f0f7838765
New scope: interim state (1)
2017-01-29 19:51:45 +01:00
f4exb
6d4c000107
DSD demod: improve YSF stability. Bumped to version 3.2.0
2017-01-29 14:55:54 +01:00
f4exb
38337f1333
Moving average fixes
2017-01-15 11:26:11 +01:00
f4exb
618f302aad
DSD demod: adapt to dsdcc version 1.6
2017-01-13 02:16:28 +01:00
f4exb
e696975301
Fixed segfault in reload devices option
2017-01-12 02:01:32 +01:00
f4exb
fb562f197c
Added reload devices option
2017-01-12 01:24:08 +01:00
f4exb
09856b5941
Sample source FIFO: write ahead the exact same amount of samples that were read. This smoothes out the process and avoids hickups
2017-01-09 02:13:27 +01:00
f4exb
88ef7eac14
Corrected version number in About panel
2017-01-09 01:35:40 +01:00
f4exb
85ed39c767
HackRF output plugin: compiles
2017-01-08 04:13:20 +01:00
f4exb
ed990094e2
Bumped version to 3.0.1
2017-01-07 10:01:27 +01:00
f4exb
afec57a6be
Audio preferences: changed dialog title and add documentation in main window readme
2017-01-07 09:50:12 +01:00
f4exb
83fcf912e9
New audio devices dialog and handling: put the AudioDeviceInfo object on the main window stack instead of dynamically allocating
2017-01-06 19:00:45 +01:00
f4exb
fb3e6dc90d
New audio devices dialog and handling: make settings persistent using main settings
2017-01-06 18:56:46 +01:00
f4exb
58b90c7914
New audio devices dialog and handling: use selected audio devices
2017-01-06 16:04:32 +01:00
f4exb
49fba5b103
New audio devices dialog and handling: use variable global input volume
2017-01-06 15:28:01 +01:00
f4exb
d8bcfb1360
New audio devices dialog and handling (1)
2017-01-06 12:43:18 +01:00
f4exb
c3b69007af
Audio preferences dialog: animate input volume control text
2017-01-06 03:13:53 +01:00
f4exb
751bf6973e
Audio preferences dialog: added input devices tab and input volume control
2017-01-06 03:02:57 +01:00
f4exb
979da93acd
Tx support: temporary fix for global audio input volume cotnrol
2017-01-06 02:29:08 +01:00
f4exb
4b89ac3360
WFM modulator: do not go below 96 kHz for the channelizer sample rate. Attempt to fix CW problem
2017-01-05 11:37:57 +01:00
f4exb
3479559859
Tx support: optimize final interpolator stages
2017-01-03 23:25:20 +01:00
f4exb
171ba7674e
Tx support: fixed buddy handling
2017-01-02 23:30:50 +01:00
f4exb
f48fd4c3a4
BladeRF output plugin: working basically
2017-01-02 20:24:25 +01:00
f4exb
fa0afb6c92
Tx support: implemented final interpolation stage in FileSink plugin
2017-01-02 03:14:46 +01:00
f4exb
d0f49291c5
added 'my' interpolation methods
2016-12-31 04:23:59 +01:00
f4exb
2047463dcf
Tx support: common device routines library and handle BladeRF Tx/Rx coordination on Rx side
2016-12-30 16:13:28 +01:00
f4exb
5a83dc09a5
Tx support: reviewed and corrected buddy mechanism
2016-12-29 19:26:45 +01:00
f4exb
f68f949c19
Tx support: interim state (1)
2016-12-29 12:41:10 +01:00
f4exb
607e89cea6
Main window status tag: call QSysInfo::prettyProductName() only if Qt version is >= 5.4
2016-12-27 00:16:43 +01:00
f4exb
35b6409753
Multiple transmission channels warning when adding more than one channel
2016-12-26 15:26:25 +01:00
f4exb
03ff449ec8
Multiple modulators support: optimization: comment out code that is useless when processing sample by sample
2016-12-26 14:52:59 +01:00
f4exb
9213c85d6a
Multiple modulators support: returned to one by one sample handling but pull a chunk of audio samples. Works with at least 3 modulators. Special handling of division factor
2016-12-26 12:45:19 +01:00
f4exb
5598265e66
Multiple modulators support: works with two modulators
2016-12-26 12:11:51 +01:00
f4exb
2a8a3bf457
Fixed core dump when ending application and Tx is still running
2016-12-26 11:23:11 +01:00
f4exb
e02ac85e50
All modulators: use buffer for input audio that is always in use while generation is running. This fixes lockup problem reported in issue #11
2016-12-26 01:39:34 +01:00
f4exb
f5572eebc0
More debug messsages
2016-12-25 21:26:37 +01:00
f4exb
53f6413bd9
Audio input: removed mutex lock on write data. Audio output: removed mutex lock on read data
2016-12-25 20:04:19 +01:00
f4exb
e05822ba02
Implement own FIFO in BasebandSampleSource. SampleSourceFIFO: remove useless chunk size completely and set initial fill to only half the FIFO size
2016-12-23 14:29:42 +01:00
f4exb
ce77f95a2c
Bumped to version 2.5.2
2016-12-23 00:34:07 +01:00
f4exb
f74e3b83a7
Modulators: changed single Tx channel samples feed handling. Pure virtual function is useless
2016-12-22 23:45:56 +01:00
f4exb
1afd8df5f9
Modulators: changed single Tx channel samples feed handling
2016-12-22 23:39:06 +01:00
f4exb
441c2c1817
Send number of samples to write in the writeData signal. Ask for half the buffer size when more than half of it is consumed
2016-12-21 02:24:49 +01:00
f4exb
fc58e1be46
AM, NFM and WFM modulators: changed mute/umute channel button icon
2016-12-20 17:56:49 +01:00
f4exb
1e881703e8
Added a NCO with floating point phase calculation before conversion to int for table indexing. This increases frequency precision and is mandatory for CTCSS tone generator
2016-12-19 02:41:31 +01:00
f4exb
d09f0d2ede
Bumped to version 2.5.1
2016-12-17 08:06:36 +01:00
f4exb
ff10cbf7d9
Updated sdrbase readme with details on how to use the recorded I/Q files
2016-12-16 01:41:41 +01:00
f4exb
014ada12ba
CW smoother: set default ramp time to 4ms and set the modulators ramp time at the same value
2016-12-16 00:02:37 +01:00
f4exb
5571e01a65
dB calculator: add floor value (default -100.0dB) when argument is 0
2016-12-15 21:27:13 +01:00
f4exb
330db19163
CW Keyer GUI: appearance fixes
2016-12-15 00:27:08 +01:00
f4exb
0a7e9261e2
CW transition smoother: use smootherstep function. See: https://en.wikipedia.org/wiki/Smoothstep
2016-12-14 23:23:58 +01:00
f4exb
98b9e20392
Make a dedicated CW transition smoothing class
2016-12-14 22:48:39 +01:00
f4exb
5000e01063
CW Keyer GUI: fixed play loop collision with file play loop
2016-12-14 02:54:05 +01:00
f4exb
a2089724cf
SSB Modulator: Interim state (4)
2016-12-13 19:57:07 +01:00
f4exb
d10209c223
CW Keyer GUI: corrected dashes and dots buttons disabled color
2016-12-12 01:53:57 +01:00
f4exb
b620462639
Windows build: added SSB Modulator and CW Keyer
2016-12-12 01:16:36 +01:00
f4exb
01e7217303
Bumped to version 2.5.0
2016-12-11 22:55:50 +01:00
f4exb
e4e2eea9d5
CW Keyer: retain only text, dashes and dots
2016-12-11 21:52:53 +01:00
f4exb
d3d6ebec89
CW Keyer with GUI. Sort of works
2016-12-11 11:35:25 +01:00
f4exb
2defcc7cec
CW Keyer: test with AM modulator and fixes
2016-12-10 08:12:16 +01:00
f4exb
d6c9b2f707
CW Keyer: compiles
2016-12-10 06:16:13 +01:00
f4exb
808a8c85fd
CW Keyer: interim state (2)
2016-12-09 19:34:38 +01:00
f4exb
35baa46f3d
CW Keyer: interim state (1)
2016-12-09 01:35:49 +01:00
f4exb
3ed1f68253
CW Keyer GUI: interim state (1)
2016-12-08 21:41:48 +01:00
f4exb
25e171bf90
Signal meter: adjust font
2016-12-07 02:53:10 +01:00
f4exb
93a08c325a
Level Meter: paint peak tip last so it appears on top
2016-12-07 01:21:00 +01:00
f4exb
bc75ca7735
Level meter embellishment
2016-12-06 00:25:59 +01:00
f4exb
e6667c88eb
NFM Demod: use different color scheme for the signal meter bar
2016-12-05 18:42:24 +01:00
f4exb
317836ac92
NFM demod: channel power calculation and squelch corrections
2016-12-05 03:46:42 +01:00
f4exb
7c3cebf2e1
NFM Demod: added signal meter. Corrected squelch. Turned frequency dial green
2016-12-05 02:09:08 +01:00
f4exb
d381075d87
Level Meter: added a signal strength in dB meter
2016-12-05 00:56:58 +01:00
f4exb
4d5e2f9656
Level Meter: set fixed background as a pixmap
2016-12-04 19:03:51 +01:00
f4exb
76932e6627
Level Meter: changed rms to avg to be generic
2016-12-04 06:44:37 +01:00
f4exb
373a99e575
Allow several classes of Level Meters sharing the same base algorithms. Initiate with the VU meter
2016-12-04 06:40:57 +01:00
f4exb
95f9a03a7b
Level meter: isolate paint method
2016-12-04 06:07:53 +01:00
f4exb
d5943288d3
Level Meter: updated face
2016-12-03 05:07:09 +01:00
f4exb
87c4a13cc1
Changed level meter background color
2016-12-02 18:19:20 +01:00
f4exb
c7b1d8a133
Windows build: include GUI level meter
2016-12-02 13:13:54 +01:00
f4exb
ea53e63556
NFM Modulator: Cleanup level meter code. Use experimental max value for modulation swing calculation
2016-12-02 03:00:41 +01:00
f4exb
7a07b56b01
NFM Modulator: basic input volume gauge
2016-12-02 02:00:53 +01:00
f4exb
0b5d794ea8
Bump version to 2.4.0
2016-11-30 02:20:48 +01:00
f4exb
c5f1acdcf1
AM Modulator: audio input (mic) basic support
2016-11-29 01:09:06 +01:00
f4exb
4c3db01409
Added an AudioInput class
2016-11-28 18:32:50 +01:00
f4exb
7c1b1032c9
AM Modulator: added file input (basic)
2016-11-28 02:17:08 +01:00
f4exb
2d0ee4bf76
SDRplay plugin: adjust documentation. Corrections and re-organization of the main readme.md file
2016-11-21 18:07:58 +01:00
f4exb
ee947f54e9
Corrected clang warnings
2016-11-21 18:01:55 +01:00
f4exb
60925ea84b
SDRPlay plugin: documentation
2016-11-21 01:21:48 +01:00
f4exb
f7b52cfcc6
Value dial improvement: use right button to clear digits at the right of the current difit position (ceil). Use left button to set cursor at current position (was any button before)
2016-11-19 12:19:00 +01:00
f4exb
85807ffadb
SDRPlay plugin: now working with open source libmirisdr
2016-11-16 02:38:21 +01:00
f4exb
863522d9ff
SDRPlay support: source plugin interim state (1) compiles
2016-11-13 02:59:31 +01:00
f4exb
ae5070ebb3
Removed useless flavour of even/odd FIR halfband filter
2016-11-11 10:21:54 +01:00
f4exb
671b380909
Bumped version to 2.2.2
2016-11-10 08:32:33 +01:00
f4exb
efbce97a2f
Improve int halfband filter even/odd I/Q stride variant
2016-11-10 02:56:49 +01:00
f4exb
c91725fe01
Push decimators halfband filter order to 64
2016-11-09 04:03:12 +01:00
f4exb
0a6dc5db37
IntHalfband filters: tuned optimizations and chose the best for x86_64
2016-11-09 03:27:30 +01:00
f4exb
d2c6791eea
Use IntHalfbandFilterST in decimators
2016-11-08 17:30:10 +01:00
f4exb
2504d199fd
IntHalfbandFilterST: implemented intrinsics class
2016-11-08 17:29:46 +01:00
f4exb
995fd04543
Removed useless include
2016-11-08 17:28:03 +01:00
f4exb
bfe24df76e
Added new halfband FIR filter with even/odd and I/Q stride
2016-11-08 02:02:29 +01:00
f4exb
3505e1b095
Allow SSE 4.1 optimization on the down channelizer
2016-11-07 18:51:32 +01:00
f4exb
8b52059ca4
IntHalfbandFilterEO1: fixed unused variables
2016-11-07 18:40:22 +01:00
f4exb
fa5030eac4
IntHalfbandFilterEO1: simplification for SSE 4.1 only and fix
2016-11-07 18:23:59 +01:00
f4exb
5a9b461d1c
Windowss build: added SSE 4.1 flags
2016-11-07 08:44:55 +01:00
f4exb
16aebb72c4
Windows build: added missing header files
2016-11-07 08:26:34 +01:00
f4exb
7015fb97d2
Put intrinsics in their own templatized classes
2016-11-07 04:16:02 +01:00
f4exb
63d6eea066
Use more precise SIMD flags and detect actual x86_64 SIMD features
2016-11-07 00:42:57 +01:00
f4exb
dbbbfa12ee
Changed USE_SIMD flag to USE_SSE
2016-11-06 02:08:38 +01:00
f4exb
af0a0896d4
IntHalfBandFilterEO2: fixed (x,y) method
2016-11-06 01:19:39 +01:00
f4exb
bc3dfb19cd
IntHalfBandFilterEO2: use dual forward and backward buffers to avoid byte shuffling in SIMD instructions. Implemented in the up channelizer
2016-11-06 01:07:13 +01:00
f4exb
de8640caae
IntHalfBandFilterEO1: rename size attribute
2016-11-06 00:23:08 +01:00
f4exb
3410d289d1
Use even/odd FIR filter based half band decimators for the device decimators
2016-11-05 21:52:13 +01:00
f4exb
f2a50c0c0f
Use even/odd FIR filter half band interpolator only if SIMD is available
2016-11-04 22:47:09 +01:00
f4exb
9f74c82715
IntHalfBand FIR filter SSE optimizations
2016-11-04 01:12:39 +01:00
f4exb
2f02d9dd69
IntHalgBandFilterDB: changed some attributes name
2016-11-03 00:30:55 +01:00
f4exb
942f897978
Use the double buffer FIR filter with the front end decimators
2016-11-02 09:15:32 +01:00
f4exb
6963c1a2f8
Fixed device input dock not visible when application is first run. Re-order Window submenu items
2016-11-02 03:31:01 +01:00
f4exb
790b024d7b
Windows build: implement new HBFilterTraits and IntHalfBandFilterDB classes
2016-11-02 02:58:31 +01:00
f4exb
875f63fd3d
Need to have SSE4.1 support when SSE is available for _mm_mullo_epi32
2016-11-02 02:51:13 +01:00
f4exb
86c148ab10
DownChannelizer: use more efficient double buffer half band decvimator
2016-11-01 17:57:46 +01:00
f4exb
5d5593bda7
Tx ph.2: put the double buffered FIR interpolator and decimator in its own class
2016-11-01 15:02:50 +01:00
f4exb
ded1d3c298
Place the halfband filter traits in their own class
2016-11-01 11:55:16 +01:00
f4exb
bd4d224166
Tx ph.2: IntHalfBandFilter: use double buffer technique for interpolation. Use it with the UpChannelizer and increase order to 96 for better spur rejection. Moreover it is still more CPU efficient
2016-11-01 05:54:25 +01:00
f4exb
6a72b12238
Tx ph.2: Windows build: activate SIMD instructions for sdrbase and modam modules
2016-11-01 00:27:20 +01:00
f4exb
3173bc0b07
Tx ph.2: Interpolator polyphase filter: add possibility to specify the number of taps per phase
2016-10-31 23:40:46 +01:00
f4exb
004cbcb060
Tx ph.2: UpChannelizer: use order 64 filter as longer orders do not improve image rejection
2016-10-31 00:33:20 +01:00
f4exb
06b2c4930e
IntHalBandFilter: added order 96
2016-10-30 23:04:54 +01:00
f4exb
f5bbbb7cab
Tx ph.2: UpChannelizer: allow any sample rate
2016-10-30 22:01:20 +01:00
f4exb
91315913b4
Tx ph.2: change UpChannelizer filter chain from std::list to std::vector
2016-10-30 18:22:33 +01:00
f4exb
31add4919d
IntHalfbandFilter: corrected shift left factor for the Samples version of the FIR
2016-10-30 12:50:06 +01:00
f4exb
fb2346aba8
Added original half band FIR coefficients as comments
2016-10-30 10:15:47 +01:00
f4exb
0ef6f7d240
Tx ph.2: created new green color themes for Rx dials
2016-10-30 10:03:09 +01:00
f4exb
4a001350d3
Tx ph.2: Templatized IntHalfbandFilter and improved coefficients. Changed to order 80 for upsamplers and 48 for downsamplers
2016-10-29 17:01:02 +02:00
f4exb
4ab45f4768
Tx ph.2: Fixed half-band interpolators and set the order to 64 (for all)
2016-10-29 12:29:24 +02:00
f4exb
e9f0bb0d45
Tx ph.2: UpChannelizer: interpolator (1) draft
2016-10-28 18:39:45 +02:00
f4exb
1f58b6ece7
DV serial: removed useless parameter
2016-10-28 09:09:19 +02:00
f4exb
be1629ca6d
Bumped version to 2.2.1
2016-10-28 08:38:01 +02:00
f4exb
0305605bbc
DV Serial: fall back multi slot support
2016-10-28 08:37:27 +02:00
f4exb
4d273d8a13
Tx ph.2: use a specialized interpolator similar to the decimator derived from the ancient interpolator
2016-10-28 03:18:24 +02:00
f4exb
4618e007de
Tx ph.2: restored ancient interpolator
2016-10-27 18:05:40 +02:00
f4exb
237703eb14
Tx ph.1: changed main menu Acquisition item to Devices item. Updated various readmes
2016-10-25 04:05:23 +02:00
f4exb
0fc6d95357
Tx ph.1: fixed read pointer management when getting new samples
2016-10-25 03:31:36 +02:00
f4exb
ee55747c0b
Tx ph.1: FileSink: set sample source FIFO size depending on sample rate
2016-10-25 02:34:29 +02:00
f4exb
5021d15162
Tx ph.1: Connect sample source FIFO read signal with forwarding samples to spectrum sink
2016-10-24 18:31:14 +02:00
f4exb
289c1a203f
Tx ph.1: Sample source FIFO read with signal. Use a specific spectrum sink (vis) reference in Device sink engine for main spectrum rendering
2016-10-24 18:06:44 +02:00
f4exb
9f1b801d1a
Tx ph.1: fixed AM modulator
2016-10-24 01:27:23 +02:00
f4exb
8f70840561
Tx ph.1: fixed sample source FIFO
2016-10-23 23:27:19 +02:00
f4exb
4e446b9c7a
Tx ph.1: fixed source sink initialization
2016-10-23 14:14:32 +02:00
f4exb
e42a717c69
Tx ph.1: Fixed sample rate and center frequency handling in File Sink
2016-10-23 10:38:44 +02:00
f4exb
119127fdab
Tx ph.1: Fixes to file sink GUI and some debug messages
2016-10-23 02:22:00 +02:00
f4exb
8f8f4c2d96
Tx ph.1: Fixed add Rx channel
2016-10-22 22:05:32 +02:00
f4exb
5b707b771b
Tx ph.1: Fixed Tx preset channels loading
2016-10-22 12:07:28 +02:00
f4exb
118c335225
Tx ph.1: Corrected Tx preset setup
2016-10-22 10:10:17 +02:00
f4exb
e24202ad2a
Tx ph.1: fixed Rx and Tx tabs management
2016-10-22 06:48:44 +02:00
f4exb
4b02072fe4
Tx ph.1: add Tx tab (2). Fixed core dump
2016-10-22 05:07:48 +02:00
f4exb
55f4d6d46f
Tx ph.1: add Tx tab (1). Core dump.
2016-10-21 16:57:50 +02:00
f4exb
6d0f783d56
Tx ph.1: added channel registration messages
2016-10-20 22:41:05 +02:00
f4exb
9fff2b8477
Tx ph.1: new AM modulator plugin (3). Implemented actual modulation code.
2016-10-20 19:34:30 +02:00
f4exb
239d67b2aa
Tx ph.1: Fixed sample sink plugin registration
2016-10-19 22:48:24 +02:00
f4exb
adbc4f38dd
Tx ph.1: Bumped to version 2.2.0
2016-10-19 22:39:32 +02:00
f4exb
2246271d47
Tx ph.1: Tx support in PluginAPI and PluginManager
2016-10-19 18:07:27 +02:00
f4exb
9f3fec7600
Tx ph.1: added device sinks list to DSP engine
2016-10-19 14:29:23 +02:00
f4exb
e5509b5fe8
Tx ph.1: added device sink reference to the device UI set
2016-10-19 14:28:58 +02:00
f4exb
7d941ccb37
Tx ph.1: show preset mode (Rx or Tx) in the presets tree. Reformatted preset tree. SerializeDeserialize preset mode
2016-10-19 02:02:49 +02:00
f4exb
717b240157
Tx ph.1: added sink or source type indicator to preset
2016-10-19 00:07:42 +02:00
f4exb
067a0910c4
Tx ph.1: added DeviceSinkAPI implementation (1)
2016-10-18 00:03:51 +02:00
f4exb
af08f1d851
RxTx semantic move: rename attributes in DeviceUISet
2016-10-17 23:03:47 +02:00
f4exb
940cfbe94e
DSPDeviceSourceEngine: stop threaded baseband sample sinks
2016-10-17 22:40:02 +02:00
f4exb
0f7ac00a71
Tx ph.1: Added the DSPDeviceSinkEngine class
2016-10-17 18:15:08 +02:00
f4exb
b56c2d9a2c
Tx ph.1: new classes (1)
2016-10-17 08:58:49 +02:00
f4exb
52b618469c
Tx ph.1: refactored source sample FIFO. StarUML model: added Tx classes
2016-10-15 09:53:06 +02:00
f4exb
4709ba9e01
TX ph.1: Baseband sample sources and Device sample sinks (1)
2016-10-14 18:47:19 +02:00
f4exb
32aece4e4a
Tx ph.1: plugins: return Rx channels control to Plugin Manager
2016-10-14 02:04:22 +02:00
f4exb
9299eac9dd
Tx ph.1: plugins (2)
2016-10-13 23:42:08 +02:00
f4exb
94e479bb75
Tx ph.1: plugins (1)
2016-10-13 22:23:43 +02:00
f4exb
9303a63931
DV Serial: prepare multi slot (4)
2016-10-12 00:53:26 +02:00
f4exb
01c901a8fe
DV Serial: prepare multi slot (3)
2016-10-12 00:19:44 +02:00
f4exb
413ba162c7
DV Serial: prepare multi slot (2)
2016-10-12 00:02:36 +02:00
f4exb
20c5ec3f76
DV Serial: removed useless parameter
2016-10-11 23:54:27 +02:00
f4exb
2caf76b746
DV Serial: prepare multi slot (1)
2016-10-11 23:51:18 +02:00
f4exb
18a8e7c903
DV Serial: implement FIFO slots
2016-10-11 22:52:45 +02:00
f4exb
13e832a20e
DV serial: alternate timeout handling. Primitives to get information about worker status
2016-10-11 20:24:08 +02:00
f4exb
32595f81b9
RxTx semantic move: renamed DeviceAPI to DeviceSourceAPI
2016-10-11 01:17:55 +02:00
f4exb
6b2e09ed10
RxTx semantic move: updated attributes and method names. Removed obsolete methods
2016-10-11 01:11:32 +02:00
f4exb
211f0570b5
RTLSDR: allow decimation by 32. Bumped to version 2.1.6
2016-10-10 02:19:21 +02:00
f4exb
aa45dcbd17
Add an interpolate method to the Interpolator class
2016-10-10 02:08:48 +02:00
f4exb
6707bab1a5
Give the decimation method of the Interpolator class its proper name
2016-10-10 01:53:32 +02:00
f4exb
6e82cb37b8
Tx support: added a sample source FIFO class
2016-10-10 01:13:12 +02:00
f4exb
5168fbf416
RxTx semantic move: updated debug message and displayed class names
2016-10-08 10:35:07 +02:00
f4exb
bb541e9fb2
AudioOutput: fixed core dump on program exit
2016-10-08 06:54:49 +02:00
f4exb
6f054a51d8
Bumped version to 2.1.5
2016-10-08 06:25:58 +02:00
f4exb
afffc2cda8
Fixed audio output management by deleting the QAudioOutput when it is not used anymore
2016-10-08 05:59:59 +02:00
f4exb
36aeaa3ea5
RxTx semantic move: renamed SampleFifo to SampleSinkFifo
2016-10-06 19:18:02 +02:00
f4exb
12ac603741
Added a double buffered sample sink FIFO class
2016-10-06 15:39:18 +02:00
f4exb
f90be69221
Removed useless dependency
2016-10-06 15:36:54 +02:00
f4exb
5cb9284367
DownChannelizer: optimization when no downsampling is done anyway
2016-10-04 16:31:54 +02:00
f4exb
9a24a1a99f
RxTx semantic move: renaming attributes (1). Corrected Star UML model
2016-10-04 01:49:28 +02:00
f4exb
e204efe2b8
RxTx semantic move: renamed DSPDeviceEngine to DSPDeviceSourceEngine
2016-10-03 18:29:05 +02:00
f4exb
dce0ace4ef
RxTx semantic move: renamed ThreadedSampleSink to ThreadedBasebandSampleSink
2016-10-03 15:55:16 +02:00
f4exb
c8f4147f31
RxTx semantic move: created DeviceSampleSource class
2016-10-02 23:21:53 +02:00
f4exb
7a535cc3b8
RxTx semantic move: renamed SampleSource to DeviceSampleSource
2016-10-02 23:16:40 +02:00
f4exb
78513854ac
RxTx semantic move: renamed SampleSink to BasebandSampleSink
2016-10-02 22:29:04 +02:00
f4exb
20c6fb19cc
RxTx semantic move: renamed Channelizer to DownChannelizer
2016-10-02 21:52:39 +02:00
f4exb
1fa80272b5
RxTx semantic move: renamed FileSink to FileRecord
2016-10-02 10:30:58 +02:00
f4exb
12d845026f
More cosmetic updates to the main window and DSD demod documentation
2016-09-30 13:26:19 +02:00
f4exb
0eaab62663
Main window and DSD demod documentation cosmetic updates
2016-09-30 08:20:27 +02:00
f4exb
8566b8cfe8
Updated main window and DSD demod plugin documentation with latest changes
2016-09-30 03:21:45 +02:00
f4exb
88f76c5a61
New dialog to store my geolocalisation
2016-09-28 17:01:57 +02:00
f4exb
894394909b
Handle my geolocation
2016-09-28 13:38:38 +02:00
f4exb
8672c69246
DSD demod: account for not constant length MBE frames
2016-09-25 01:21:30 +02:00
f4exb
b4b133118d
Bumped version displays to 2.1.4
2016-09-23 05:56:03 +02:00
f4exb
068eb90795
DSD demod plugin: added missing filtermbe for Windows build
2016-09-12 06:02:13 +02:00
f4exb
5d30f6a51a
DV Serial engine/worker: fix audio samples not flushed to audio FIFO immediately after queue processing which resulted in audible gaps
2016-09-11 19:58:38 +02:00
f4exb
fed6b9a3bd
Sort presets before display in the presets window
2016-09-11 18:58:40 +02:00
f4exb
7fc2b431a4
DSD demod plugin: DV serial: fix filter, timeout value and volume control
2016-09-11 17:02:49 +02:00
f4exb
be467fdc24
DSD demod plugin: fixed DV Serial concurrent support
2016-09-11 03:57:35 +02:00
f4exb
d01a4166eb
DSD demod plugin: lowpass filter for DV serial upsample
2016-09-10 20:03:06 +02:00
f4exb
f64d078375
DSD demod plugin: DMR refactoring: allow stereo split of TDMA channels. Works with DVSerial too now.
2016-09-07 00:47:51 +02:00
f4exb
045392ae79
DSD demod plugin: DMR refactoring: added buttons to toggle slot1 and slot2 voice output
2016-08-31 00:58:19 +02:00
f4exb
c5ad25b19d
Push versionto 2.1.3
2016-08-28 23:59:16 +02:00
f4exb
5174fcdff7
Limit scope time span display to two decimals
2016-08-26 21:22:40 +02:00
f4exb
9d5e5c76c7
Fixed MovingAverage uint to uint32_t and template type conversions
2016-08-26 02:01:29 +02:00
f4exb
a6782a2780
DSD demod plugin: added button to toggle between transition constellation and symbol synchronization displays
2016-08-25 01:06:42 +02:00
f4exb
89a017a5b7
DSD plugin: removed reference to modulation entirely. Bump to version 2.1.2
2016-08-17 01:33:37 +02:00
f4exb
fb54b162cd
Updated to v2.1.1 and updated plugin versions
2016-07-31 13:40:41 +02:00
f4exb
c65f857abd
DSD support: remove audio read fail debug message
2016-07-31 06:05:32 +02:00
f4exb
9007d505ee
SDRdaemonFEC plugin: use meta data CRC32 and promote to version 2.1.0 again
2016-07-24 19:50:51 +02:00
f4exb
66e829bbf9
SDRdaemonFEC plugin: demote to version 2.0.2
2016-07-24 14:38:25 +02:00
f4exb
bda1d8997b
SDRdaemonFEC plugin: migrate to new cm256cc library
2016-07-23 19:59:42 +02:00
f4exb
806a3fb87d
Fixed header defined guard for Eclipse engine
2016-07-14 20:31:26 +02:00
f4exb
7c17d19391
set version back to 2.1.0 after merge
2016-07-05 20:04:10 +02:00
f4exb
8a22c0b468
Merge branch 'master' into dev. Build for Mac OS.
2016-07-05 20:02:51 +02:00
f4exb
b655d45581
set version back to 2.0.0 before merge
2016-07-05 20:02:42 +02:00
Edouard Griffiths
5b2d65853c
Bump version to 2.0.1 for MacOS build
2016-07-05 13:50:34 +02:00
Ziga S
08602c661b
Updated CMake files for QTEditor cmake style.
...
AudioOutput had previously stalled, mutex temporary removed(Q&D workaround, need for study OSX Audio Concurency).
Removed some part of code in DemodBFM for OSX compilations.
Code runs and was tested with HackRF.
Note: There is need have investigate two potencial problems(DemodBFM bug and AudioOutput deadlocking?).
2016-06-29 10:10:24 +02:00
Ziga S
0df3427a3a
MacOS Compatibility:
...
- pthread barriers implementation.
- clock time.h
- libiconv link
- Support for dylib loading
- CMake project fixes
QTEditor parent project file.
2016-06-28 10:20:47 +02:00
f4exb
b73330c663
SDRdaemonFEC support: correctly implement in plugin manager
2016-06-20 01:58:46 +02:00
f4exb
e418e68bd9
SDRdaemonFEC support: interim state (1). Compile except UI. Bumped version to 2.1.0 where necessary
2016-06-20 00:45:24 +02:00
f4exb
83d57032fe
Multi Device support: updates to main window readme
2016-05-28 10:20:01 +02:00
f4exb
25cb571721
Multi device support: sampling devices control tab widget border color update to match selected tab
2016-05-25 03:19:15 +02:00
f4exb
e3e470102b
Multi device support: commented out code cleanup. Make sampling device control active tab highlight less prominent
2016-05-25 03:06:40 +02:00
f4exb
6b81701f27
Merge branch 'dev' of /shared/development/sdrangel into dev
2016-05-25 02:43:01 +02:00
f4exb
b97a2ecffb
Multi device support: Windows support
2016-05-25 02:33:50 +02:00
f4exb
f9c632d773
Multi device support: attempt to fix default preset load and save
2016-05-24 22:55:10 +02:00
f4exb
3e1236f898
Multi device support: SDRdaemon and FileSource plugins: allow one instance per device set with only the one coresponding to the device set accessible for selection
2016-05-23 00:21:13 +02:00
f4exb
a32175eccb
Multi device support: ensure there is only one instance of SDRdaemon and FileSource plugins
2016-05-22 21:56:07 +02:00
f4exb
3e4a163304
Multi device support: proper use of on action Exit trigger
2016-05-20 22:14:07 +02:00
f4exb
c16aea9baf
Multi device support: fixed core dump (seg fault) brutally by commenting out failing instruction (AudioOutput destruction of QAudioOutput)
2016-05-20 22:11:02 +02:00
f4exb
2f6db428bc
Multi device support: fixed saving main window state across master (sampling device) tab changes
2016-05-20 10:35:51 +02:00
f4exb
e935716568
Multi device support: fixed core dump (seg fault) brutally by commenting out failing instruction (disconnect)
2016-05-20 00:49:55 +02:00
f4exb
1c9b4ef1c9
Multi device support: save main window state across master (sampling device) tab changes
2016-05-18 16:24:04 +02:00
f4exb
90b1fae799
Multi device support: moved audio output multi client support to audio output object itself
2016-05-18 11:32:19 +02:00
f4exb
83e1b84c38
Multi device support: methods to start/stop audio immediately
2016-05-18 10:51:42 +02:00
f4exb
0872340c5a
Multi device support: fixed missing destructor
2016-05-18 10:46:19 +02:00
f4exb
74be2872ca
Multi device support: documented main window interface
2016-05-18 01:07:34 +02:00
f4exb
54243fc961
Multi device support: restored loaded plugins display from the main window
2016-05-18 00:42:35 +02:00
f4exb
7aa5ca7573
Multi device support: commented out code cleanup
2016-05-17 19:36:28 +02:00
f4exb
86c78cd6a5
Multi device support: added missing checkmark icon
2016-05-17 19:32:40 +02:00
f4exb
197feb1c9d
Multi device support: SDRDaemon plugin removed useless dependencies on plugin API
2016-05-17 19:08:04 +02:00
f4exb
ecbff75bf1
Multi device support: add a check button to confirm source input change
2016-05-17 14:21:27 +02:00
f4exb
8e3e00e7e5
Multi device support: set source view tab at correct index when changing source
2016-05-17 11:36:22 +02:00
f4exb
cae0012399
Multi device support: fixed segfaults when changing device
2016-05-17 11:06:56 +02:00
f4exb
5a8d05bfaf
Multi device support: simplify source input setting
2016-05-17 03:41:01 +02:00
f4exb
86b04a4d62
Multi device support: code cleanup and fixed lock on exit
2016-05-17 00:04:27 +02:00
f4exb
3f2b3cdea3
Multi device support: sort of works but plugin manager is not fixed
2016-05-16 21:51:53 +02:00
f4exb
00864bfb6c
Multi device support: use device API for channel load and save
2016-05-16 19:55:01 +02:00
f4exb
2f1c9eac6e
Multi device support: use device API for channel registrations
2016-05-16 19:37:53 +02:00
f4exb
e1e3df466f
Multi device support: channel registrations support in device API
2016-05-16 18:53:01 +02:00
f4exb
6840a20ab9
Multi device support: migrated channel registration objects to plugin API
2016-05-16 18:34:23 +02:00
f4exb
a9cda881d6
Multi device support: removed useless handle message method in plugin manager
2016-05-16 18:16:00 +02:00
f4exb
9e77782da9
Multi device support: load and save source presets moved to device API
2016-05-16 17:47:22 +02:00
f4exb
bb8c3a305f
Multi device support: implement input source details in device API
2016-05-16 16:37:07 +02:00
f4exb
500e809cba
Multi device support: moved setInputGUI method from plugin API and manager classes to device API class
2016-05-16 16:02:55 +02:00
f4exb
6747a1cae7
Multi device support: partially removed DSPDeviceEngine dependency in plugin manager
2016-05-16 11:32:22 +02:00
f4exb
9013e057fa
Multi device support: removed GLSpectrum dependency in plugin manager
2016-05-16 10:40:18 +02:00
f4exb
2893d7bb06
Multi device support: code cleanup in plugin manager and API
2016-05-16 10:35:36 +02:00
f4exb
8503b29805
Multi device support: more GUIs enhancements
2016-05-16 10:18:22 +02:00
f4exb
bbb4bc28b4
Multi device support: channel plugin per device mechanism validation with AM demod
2016-05-16 03:21:21 +02:00
f4exb
7412ee0d54
Multi device support: migrate device specific stuff outside plugin classes completed for source plugins
2016-05-16 02:14:36 +02:00
f4exb
4756299ad9
Multi device support: migrate device specific stuff outside plugin classes (added files)
2016-05-16 01:12:55 +02:00
f4exb
be918a217b
Multi device support: migrate device specific stuff outside plugin classes
2016-05-16 01:12:37 +02:00
f4exb
a26174eb8b
Multi device support: add channels and channel markers to the tab associated to the device plugin
2016-05-15 11:26:48 +02:00
f4exb
8d480c899d
Multi device support: restored AM demod plugin
2016-05-15 10:34:48 +02:00
f4exb
f0b7f6bf4e
Multi device support: more GUIs enhancements
2016-05-15 10:11:22 +02:00
f4exb
5dacda7f59
Multi device support: added Qt version in main window status bar
2016-05-15 04:51:34 +02:00
f4exb
4027b00675
Multi device support: GUI enhmcements
2016-05-15 04:38:37 +02:00
f4exb
7452e2fe04
Multi device support: cleanup after last commit
2016-05-14 21:33:12 +02:00
f4exb
3cba9014b6
Multi device support: removed main window channel acion dependency
2016-05-14 20:57:43 +02:00
f4exb
58709e0bae
Multi device support: add channels from device control working concept
2016-05-14 18:12:39 +02:00
f4exb
117f636f1f
Multi device support: more visible button icons on devices control
2016-05-14 15:32:51 +02:00
f4exb
ba34b39309
Multi device support: added missing sanmple device UI class
2016-05-14 15:06:08 +02:00
f4exb
f2872ae0ed
Multi device support: moved loaded plugins dialog to devices control
2016-05-14 14:56:41 +02:00
f4exb
942bd0a733
Multi device support: create a dedicated UI for devices control
2016-05-14 14:12:57 +02:00
f4exb
2e78803cfa
Multi device support: de-activate this support until the plugin dependency problems are solved
2016-05-14 10:48:26 +02:00
f4exb
2f9e5ac051
Multi device support: small cleanup
2016-05-14 10:38:29 +02:00
f4exb
a4a8b47608
Multi device support: fixed selected button switch color
2016-05-14 05:29:57 +02:00
f4exb
8a6cf3374e
Multi device support: changing input view tab changes all other tabs accordingly
2016-05-14 03:36:28 +02:00
f4exb
3c0e66c90e
Multi device support: GUIs enhancements
2016-05-14 03:15:03 +02:00
f4exb
7aaed679c7
Multi device support: fixed segfault in audio stop
2016-05-14 01:01:28 +02:00
f4exb
4306192097
Multi device support: first working prototype
2016-05-14 00:49:18 +02:00
f4exb
f5a65ddc97
Multi device support: interim state #2
2016-05-13 18:43:09 +02:00
f4exb
ef81b11640
Multi device support: store device tab index in plugin manager
2016-05-13 17:35:14 +02:00
f4exb
f612327a51
Multi device support: interim state #1
2016-05-13 15:45:42 +02:00
f4exb
dec0addc25
Multi device support: basic multi device creation and deletion
2016-05-13 11:42:03 +02:00
f4exb
df661cc366
Multi device support: Main window: created a method to add a new device and associated objects
2016-05-13 09:23:33 +02:00
f4exb
7053d3775c
Multi device support: completely removed direct access to DSP device engine from DSP engine
2016-05-13 00:50:29 +02:00
f4exb
2b036e2212
Multi device support: completely removed dependency on DSPEngine from source plugins
2016-05-13 00:03:58 +02:00
f4exb
f4c03bcab1
Multi device support: completely removed DSPEngine dependency on DSPDeviceEngine message queues
2016-05-12 23:45:27 +02:00
f4exb
7707858d57
Multi device support: pass plugin API to devices input handlers to give access to DSP device engine methods
2016-05-12 23:35:30 +02:00
f4exb
7b0e6fd42e
Multi device support: display version and system product name in main window status bar
2016-05-12 19:28:04 +02:00
f4exb
f275e93f16
Multi device support: display date/time in ISO format in main window status bar
2016-05-12 19:06:38 +02:00
f4exb
cd9532a5e2
Multi device support: Changed aspect of record button
2016-05-12 12:04:59 +02:00
f4exb
e750acc7da
Multi device support: Apply previous changes to RTL-SDR.
2016-05-12 11:10:10 +02:00
f4exb
e25c465b82
Multi device support: removed as much as possible (now) DSPDeviceEngine dependencies in MainWindow to source plugin GUIs. This includes file sink handling. Applies to BladeRF only.
2016-05-12 10:31:57 +02:00
f4exb
5de7b0168e
Multi device support: removed threaded sample sink add/remove in DSPEngine
2016-05-12 01:13:58 +02:00
f4exb
2f080bf45b
Multi device support: removed start/stop in DSPEngine
2016-05-12 01:04:40 +02:00
f4exb
400e6b1028
Multi device support: cleanup after the move of DSPDeviceEngine start/stop actions
2016-05-12 00:35:39 +02:00
f4exb
ecd05096ad
Multi device support: moved DSPDeviceEngine start/stop actions and status from main window to each source plugin GUI
2016-05-11 23:35:16 +02:00
f4exb
7992f3f428
Multi device support: add start/stop buttons to all source plugins GUIs
2016-05-11 20:02:45 +02:00
f4exb
6ef4653d35
Multi device support: add a unique ID to DSPDeviceEngine
2016-05-11 19:14:23 +02:00
f4exb
66daf9fa4e
Multi device support: access DSPDeviceEngine from the channel plugins using the plubgin API and not a direct access
2016-05-11 18:29:01 +02:00
f4exb
33e5e781c0
Multi device support: use DSPDeviceEngine instead of DSPEngine in PluginManager
2016-05-11 17:03:02 +02:00
f4exb
e3d39c7d3f
Multi device support: suppress reference to DSPEngine in PluginAPI
2016-05-11 16:03:03 +02:00
f4exb
c556a16caa
Prepare multi device support in DSP Engine
2016-05-11 11:34:44 +02:00
f4exb
6d703a9730
DSD demod: DV serial support: set audio buffer length to 1s (48000 samples)
2016-05-09 23:02:48 +02:00
Edouard Griffiths
ee57833305
DSD demod: DV serial Windows build adjustments
2016-05-09 19:49:10 +02:00
Edouard Griffiths
6a648c5046
Bump version to v1.2.2
2016-05-09 19:48:41 +02:00
f4exb
15a583e8a9
DSD Demod: DV Serial support: popup message to list devices when enabling
2016-05-09 18:17:53 +02:00
Edouard Griffiths
84479fdbcc
DSD demod: serialDV library support in Windows. Updates in sdrbase
2016-05-09 17:48:34 +02:00
f4exb
7e4c05417a
DSD demod: adapt serial com pors scan to Windows
2016-05-09 11:37:12 +02:00
f4exb
195a42460b
DSD demod: increase volume span
2016-05-09 11:02:27 +02:00
f4exb
6771e5e86c
DSD demod: fixes for Serial DV (1)
2016-05-09 09:24:28 +02:00
Edouard Griffiths
3070255827
Updates for v1,2,1 Windows build
2016-05-09 02:15:07 +02:00
f4exb
ba71089aff
DSD demod DV serial support revised audio processing
2016-05-09 01:26:39 +02:00
f4exb
0cc8bc3c89
DV serial support implemented
2016-05-08 10:48:13 +02:00
f4exb
4daa54b8b7
Serial DV support. Implemented without audio upsampling to 48k
2016-05-08 07:02:31 +02:00
f4exb
be1a4caae1
DV Serial support: working signal/slot mechanism
2016-05-08 06:00:37 +02:00
f4exb
b63ee5eeec
Fixed audio dialog
2016-05-04 17:21:57 +02:00
f4exb
ccca87477d
Moved audio dialog in global Preferences menu. Check for DV Serial library and set flags
2016-05-04 17:07:26 +02:00
f4exb
33b7177445
RTL-SDR source plugin: added 256k and 1600k sample rates
2016-05-03 02:14:41 +02:00
f4exb
bf164db653
DSD demod: push version to 1.2.0 and added readme for the plugin
2016-04-24 18:24:08 +02:00
f4exb
d92a8fe266
Enhance scope GUI display
2016-04-23 21:48:02 +02:00
f4exb
d2851058f8
Merge branch 'fix' into dev. Fixed glspectrum useless dependency on QOpenGLWidget
2016-04-23 10:19:19 +02:00
Edouard Griffiths
89cdd40439
GLSpectrum: removed useless dependency on QOpenGLWidget. Fixes issue #4
2016-04-12 14:02:17 +02:00
f4exb
5872ee0ca7
DSD demod plugin: DSD proper integration interim state #1
2016-04-09 13:12:48 +02:00
f4exb
f143b59403
NFM demod and UDP source: revised FM completely rationalizing deviation. New input in UDP source GUI to specify the FM deviation
2016-04-04 03:44:06 +02:00
f4exb
4debb8eb41
UDPsrc utility: fixed buffer wrap around code. UDPSunk plugin: set a fixed UDP block size of 2048 (512 samples * 4 byte samples) thanks to UDPsrc utility
2016-04-03 11:29:11 +02:00
f4exb
f245dc8206
GLScope: fixed pre-trigger samples initialization when trace size changes
2016-04-03 01:49:58 +02:00
f4exb
ca52dbf5b4
Scope GUI: do not apply trigger settings on trace length changed or sample rate changed
2016-04-01 06:22:19 +02:00
f4exb
fa754da0f1
Scope GUI: removed unused traceMemoryChanged signal
2016-04-01 05:50:09 +02:00
f4exb
697a6c96fc
Scope GUI: update currently displayed trace sample rate when trace history changes. Align all numerical displays on the right
2016-04-01 05:36:41 +02:00
f4exb
bbfa4dfd17
Scope GUI: show currently displayed trace sample rate
2016-04-01 05:29:54 +02:00
f4exb
8eb29d9ce0
Scope GUI: block all trigger controls while in trace memory
2016-04-01 05:06:52 +02:00
f4exb
dc16def6e3
Scope: block incoming traces (trigger) while in trace memory
2016-04-01 04:42:47 +02:00
f4exb
68ed0013ea
NFM demod: added adjustable squelch gate time (AGC attack) to adjust the length of transient elimination from default 50ms
2016-03-31 19:38:39 +02:00
f4exb
b70fa3f191
Fixed preset import
2016-03-29 14:51:52 +02:00
f4exb
bb9900e699
Automatically add .prex suffix to saved preset file if not specified in the file dialog
2016-03-29 11:04:08 +02:00
f4exb
a81c7e6e5b
Added preset export/import to/from base64 text file
2016-03-29 10:57:50 +02:00
f4exb
34f0ce95c9
Bump to version 1.1.5 in About dialog
2016-03-29 03:19:53 +02:00
Edouard Griffiths
27b6aab5f7
Windows build: added possibility to build with MinGW64 (experimental, does not work)
2016-03-27 18:56:33 +02:00
f4exb
0822773fbb
SDRdaemon plugin: send configuration phase 1
2016-03-26 21:40:54 +01:00
f4exb
78fe595a7e
Update readme with statement on Android. Updated version in About dialog
2016-03-23 08:34:22 +01:00
Edouard Griffiths
e861ddfc29
Android build: use simple boost install
2016-03-22 01:24:38 +01:00
Edouard Griffiths
b1cc7f2306
OpenGL modernization: GLScope: corrected index calculation when trace is delayed
2016-03-09 13:47:44 +01:00
f4exb
6fde3b75f6
Windows build: remove sdrdaemon until LZ4 dependency is resolved. Set boost version to 1.58
2016-03-09 06:49:49 +01:00
Edouard Griffiths
782bb8ae40
Windows build: apply modifications
2016-03-09 06:39:19 +01:00
Edouard Griffiths
f81820fa58
Have Windows plugins (.dll) searched by plugin manager loader. Added .pro file for filesource input plugin
2016-03-08 13:58:53 +01:00
f4exb
f4f8c3d2f5
OpenGL modernization: make shaders code compatible with OpenGL ES 2.0
2016-03-08 09:17:00 +01:00
f4exb
dcbd61904c
Created .pro files for compilation with Windows Qt Creator
2016-03-08 06:51:56 +01:00
f4exb
c6d7207b1a
Reorganized sdrbase library code
2016-03-08 04:54:12 +01:00
f4exb
61fdee1332
OpenGL modernization: GLScope: fixed IQPolar right scale matrix on display #1 only
2016-03-06 16:51:07 +01:00
f4exb
4cdaf0fe54
OpenGL modernization: removed GL_DEPRECTATED blocks entirely
2016-03-06 16:39:28 +01:00
f4exb
1a891f8e81
Make it buildable for Android with QtCreator
2016-03-06 15:10:22 +01:00
f4exb
b2cd053cdb
OpenGL modernization: GLSpectrum: use functions from the QOpenGLContext functions exclusively
2016-03-06 12:15:40 +01:00
f4exb
92a588b060
OpenGL modernization: GLScope: enhance openGL context checking and debugging at initializeGL time
2016-03-06 10:48:34 +01:00
f4exb
264022d2ca
OpenGL modernization: GLScope: make sure openGL functions are called through QOpenGLFunctions
2016-03-06 10:00:13 +01:00
f4exb
cefb6145a2
OpenGL modernization: call cleanup() in destructors
2016-03-06 09:40:07 +01:00
f4exb
ca49e2d990
OpenGL modernization: various fixes
2016-03-06 09:33:10 +01:00
f4exb
f002d8daa6
OpenGL modernization: GLScope: gotten rid of old OpenGL code entirely (in GL_DEPRECATED define blocks)
2016-03-06 09:06:59 +01:00
f4exb
382ee344d3
OpenGL modernization: GLScope modernization completed
2016-03-06 02:06:36 +01:00
f4exb
8d843939e2
OpenGL modernization: GLScope modernization #3
2016-03-06 00:45:10 +01:00
f4exb
e55da665e9
OpenGL modernization: GLScope modernization #2
2016-03-05 23:43:36 +01:00
f4exb
1dbd387ea6
OpenGL modernization: GLScope modernization #1
2016-03-05 23:18:26 +01:00
f4exb
1126508b27
OpenGL modernization: GLSpectrum moved back to QGLWidget
2016-03-05 21:54:24 +01:00
f4exb
2b5fca79a6
OpenGL modernization: GLSpectrum moved to QOpenGLWidget
2016-03-05 16:44:29 +01:00
f4exb
271b95d0d8
OpenGL modernization: gotten rid of old OpenGL code entirely (in GL_DEPRECATED define blocks)
2016-03-05 14:31:46 +01:00
f4exb
9ea5ee3854
OpenGL modernization: draw the histogram the new way
2016-03-05 14:28:55 +01:00
f4exb
30c5b5f505
OpenGL modernization: more GL_DEPRECATED blocks
2016-03-05 12:33:54 +01:00
f4exb
e95dddd0d8
GLSpectrum: reduce width of frequency scale channel overlays so that they do not overlap with text
2016-03-05 12:20:15 +01:00
f4exb
fa23c4536f
OpenGL modernization: waterfall texture update optimization
2016-03-05 12:12:55 +01:00
f4exb
c5a45e57ee
OpenGL modernization: draw the waterfall the new way
2016-03-05 11:57:53 +01:00
f4exb
3aabeb4399
OpenGL modernization: draw the frequency scale the new way
2016-03-05 08:53:56 +01:00
f4exb
2720969a84
OpenGL modernization: more GL_DEPRECATED blocks
2016-03-05 07:02:06 +01:00
f4exb
f78206defc
OpenGL modernization: draw the left scales the new way
2016-03-05 06:45:05 +01:00
Edouard Griffiths
9ac3150c0c
OpenGL modernization: changed copyright notices
2016-03-04 18:51:03 +01:00
f4exb
5cf9377247
OpenGL modernization: draw histogram overlays the new way
2016-03-04 03:45:34 +01:00
f4exb
c844a79a7a
OpenGL modernization: draw frequency scale overlays the new way
2016-03-04 02:24:08 +01:00
f4exb
a3627dffd9
OpenGL modernization: draw waterfall channel overlays the new way
2016-03-04 01:30:29 +01:00
f4exb
a33eb6555f
OpenGL modernization: draw waterfall frame box teh new way
2016-03-03 22:57:34 +01:00
f4exb
ee6223618a
OpenGL modernization: draw waterfall grid time lines the new way
2016-03-03 22:48:45 +01:00
f4exb
5bc899f9c6
OpenGL modernization: draw waterfall grid frequency lines the new way
2016-03-03 22:45:43 +01:00
f4exb
2079970972
Removed useless dependency on stacktrace.h
2016-03-03 19:57:28 +01:00
f4exb
56df03ef29
OpenGL modernization: draw histogram grid frequency lines the new way. Added missing transformation matrices
2016-03-03 19:56:54 +01:00
f4exb
c7b1bb3912
OpenGL modernization: draw histogram grid power lines the new way
2016-03-03 08:50:10 +01:00
f4exb
62a9aa2ff0
OpenGL modernization: draw histogram contour the new way
2016-03-03 01:41:30 +01:00
f4exb
34df31ad27
OpenGL modernization: generalize simple shader program class
2016-03-03 01:09:55 +01:00
f4exb
7d0fe882d7
OpenGL modernization: draw the max hold spectrum line in the new way
2016-03-03 00:19:18 +01:00
f4exb
691a34cb16
OpenGL modernization: draw the spectrum line in the new way. New object GLShaderSimplePolyline
2016-03-02 23:55:29 +01:00
f4exb
79c717862c
OpenGL modernization: draw the spectrum line in the new way. Use transformation matrix driectly
2016-03-02 22:50:05 +01:00
f4exb
a1e2f541da
OpenGL modernization: draw the spectrum line in the new way. Rectangle calculation update.
2016-03-02 09:16:21 +01:00
f4exb
add5a382f3
OpenGL modernization: draw the spectrum line in the new way
2016-03-02 08:32:43 +01:00
f4exb
22d9e77974
OpenGL modernization: compile and link basic shaders
2016-03-02 03:09:50 +01:00
f4exb
8b800d8354
OpenGL modernization: added class for shader sources
2016-03-01 21:32:41 +01:00
f4exb
d975a0f12c
OpemGL: reorder functions so that the sequence glPushMatrix, glScalef and glTranslatef is always first in each rendering block lines of code
2016-02-29 23:29:01 +01:00
f4exb
b2dc3026bc
Android OpenGL specifics #1
2016-02-29 03:04:14 +01:00
f4exb
8d43ead373
Move to Open GL ES: replace glBegin/glEnd seqiences
2016-02-28 22:03:37 +01:00
f4exb
6a20810f3d
Merge branch 'dev' into android
2016-02-28 11:05:07 +01:00
f4exb
718dcf3d8f
Reorder glPushMatrix and glBindTexture to ease future migration to Open GL ES 2.0
2016-02-28 11:01:58 +01:00
f4exb
f1371026ba
Adapt to Qt Android #1
2016-02-28 10:53:37 +01:00
f4exb
58d82139ab
Filesource plugin: enhanced readibility of timestamp
2016-02-25 01:44:48 +01:00
f4exb
944418a720
UDPsource plugin: fixed missing method body causing program crash when address text is edited
2016-02-25 00:55:05 +01:00
f4exb
6fd9e4f5bc
cmake: added install and uninstall targets
2016-02-24 11:51:36 +01:00
f4exb
5ab1f76538
SDRdaemon plugin: fixed UDP setting in UI
2016-02-23 23:16:05 +01:00
f4exb
2938a93ddf
Added compressed icon. Changed unlocked icon
2016-02-23 10:53:30 +01:00
f4exb
66accbcc5a
Added locked and unlocked icons
2016-02-23 10:37:30 +01:00
f4exb
ca7d8de81e
SDRdaemon plugin: added counters for data received from UDP
2016-01-28 03:30:36 +01:00
f4exb
7a6882829a
SDRdaemon plugin: new classes
2016-01-24 23:38:55 +01:00
Edouard Griffiths
53027c42d2
Added missing tooltips in main GUIs
2016-01-12 13:38:44 +01:00
f4exb
d787d72492
Normalize central spectrum font
2016-01-12 06:13:11 +01:00
F4EXB
ec8e4d51df
Font size and face normalization (final)
2016-01-12 05:51:26 +01:00
f4exb
9909858e7a
Normalize main window font (3)
2016-01-12 04:56:14 +01:00
f4exb
9d42632e94
Normalize main window font (more)
2016-01-12 04:52:14 +01:00
f4exb
b3e7f897ed
Normalize main window font
2016-01-12 04:47:43 +01:00
f4exb
f92b3c7811
Normalize Scope and Spectrum control GUIs
2016-01-12 04:38:44 +01:00
f4exb
3564b8ba58
BFM demod: re-introducing LSB stereo GUI controls
2015-12-25 20:12:50 +01:00
f4exb
8065c4157c
Revert "BFM demod: introducing LSB stereo for what it's worth..."
...
This reverts commit b5669fee2f
2015-12-25 19:59:45 +01:00
f4exb
b5669fee2f
BFM demod: introducing LSB stereo for what it's worth...
2015-12-23 06:42:59 +01:00
f4exb
044e0bfc27
BFM demod: RDS GUI part #9 : group14 full implementation. Separate clear RDS data button
2015-12-16 03:12:38 +01:00
f4exb
0259868ebe
Merge branch 'fix' into dev
2015-12-10 04:03:47 +01:00
f4exb
85f4963438
Code fix: threaded sample sink handle message method should take a const message argument
2015-12-10 01:56:38 +01:00
f4exb
1b66b72a11
BFM demod: implement button to control RDS activation
2015-12-09 04:13:13 +01:00
f4exb
fa2d9aecf5
BFM demod: added pilot view option and pilot power display
2015-12-09 00:04:46 +01:00
f4exb
f300b675bf
Unset PLL lock status as soon as condition is lost
2015-12-09 00:02:21 +01:00
f4exb
e533997dbe
BFM demod: apply de-emphasis
2015-12-08 02:00:30 +01:00
f4exb
2f8fda7137
PLL cleanup
2015-12-07 22:31:44 +01:00
Edouard Griffiths
ea5cdb034f
Implemented phase lock with configurable outputs
2015-12-07 18:20:27 +01:00
f4exb
baccaba2c8
BFM demod: PLL lock pilot carrier in flow
2015-12-07 02:18:31 +01:00
f4exb
f69e69a799
BFM demod: added phase lock class. Updated copyright notices
2015-12-06 19:47:55 +01:00
